sb/intel: Move 'smbus.asl' to common place

Change-Id: Ia5b148c54224269bda98afe7c8a2c22c10a3bf56
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36500
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Guckian
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

1 files changed, 236 insertions, 0 deletions

diff --git a/src/southbridge/intel/common/acpi/smbus.asl b/src/southbridge/intel/common/acpi/smbus.asl
new file mode 100644
index 0000000000..268298fb4c
--- /dev/null
+++ b/src/southbridge/intel/common/acpi/smbus.asl
@@ -0,0 +1,236 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2007-2009 coresystems GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; version 2 of
+ * the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+// Intel SMBus Controller 0:1f.3
+
+Device (SBUS)
+{
+	Name (_ADR, 0x001f0003)
+
+#ifdef ENABLE_SMBUS_METHODS
+	OperationRegion (SMBP, PCI_Config, 0x00, 0x100)
+	Field(SMBP, DWordAcc, NoLock, Preserve)
+	{
+		Offset(0x40),
+		,	2,
+		I2CE,	1
+	}
+
+	OperationRegion (SMBI, SystemIO, SMBUS_IO_BASE, 0x20)
+	Field (SMBI, ByteAcc, NoLock, Preserve)
+	{
+		HSTS,	8,	// Host Status
+		,	8,
+		HCNT,	8,	// Host Control
+		HCMD,	8,	// Host Command
+		TXSA,	8,	// Transmit Slave Address
+		DAT0,	8,	// Host Data 0
+		DAT1,	8,	// Host Data 1
+		HBDB,	8,	// Host Block Data Byte
+		PECK,	8,	// Packet Error Check
+		RXSA,	8,	// Receive Slave Address
+		RXDA,	16,	// Receive Slave Data
+		AUXS,	8,	// Auxiliary Status
+		AUXC,	8,	// Auxiliary Control
+		SLPC,	8,	// SMLink Pin Control
+		SBPC,	8,	// SMBus Pin Control
+		SSTS,	8,	// Slave Status
+		SCMD,	8,	// Slave Command
+		NADR,	8,	// Notify Device Address
+		NDLB,	8,	// Notify Data Low Byte
+		NDLH,	8,	// Notify Data High Byte
+	}
+
+	// Kill all SMBus communication
+	Method (KILL, 0, Serialized)
+	{
+		Or (HCNT, 0x02, HCNT)	// Send Kill
+		Or (HSTS, 0xff, HSTS)	// Clean Status
+	}
+
+	// Check if last operation completed
+	// return	Failure = 0, Success = 1
+	Method (CMPL, 0, Serialized)
+	{
+		Store (4000, Local0)		// Timeout 200ms in 50us steps
+		While (Local0) {
+			If (And(HSTS, 0x02)) {	// Completion Status?
+				Return (1)	// Operation Completed
+			} Else {
+				Stall (50)
+				Decrement (Local0)
+				If (LEqual(Local0, 0)) {
+					KILL()
+				}
+			}
+		}
+
+		Return (0)		//  Failure
+	}
+
+
+	// Wait for SMBus to become ready
+	Method (SRDY, 0, Serialized)
+	{
+		Store (200, Local0)	// Timeout 200ms
+		While (Local0) {
+			If (And(HSTS, 0x40)) {		// IN_USE?
+				Sleep(1)		// Wait 1ms
+				Decrement(Local0)	// timeout--
+				If (LEqual(Local0, 0)) {
+					Return (1)
+				}
+			} Else {
+				Store (0, Local0)	// We're ready
+			}
+		}
+
+		Store (4000, Local0)	// Timeout 200ms (50us * 4000)
+		While (Local0) {
+			If (And (HSTS, 0x01)) {		// Host Busy?
+				Stall(50)		// Wait 50us
+				Decrement(Local0)	// timeout--
+				If (LEqual(Local0, 0)) {
+					KILL()
+				}
+			} Else {
+				Return (0)		// Success
+			}
+		}
+
+		Return (1)		// Failure
+	}
+
+	// SMBus Send Byte
+	// Arg0:	Address
+	// Arg1:	Data
+	// Return:	1 = Success, 0=Failure
+
+	Method (SSXB, 2, Serialized)
+	{
+
+		// Is the SMBus Controller Ready?
+		If (SRDY()) {
+			Return (0)
+		}
+
+		// Send Byte
+		Store (0, I2CE)		// SMBus Enable
+		Store (0xbf, HSTS)
+		Store (Arg0, TXSA)	// Write Address
+		Store (Arg1, HCMD)	// Write Data
+
+		Store (0x48, HCNT)	// Start + Byte Data Protocol
+
+		If (CMPL()) {
+			Or (HSTS, 0xff, HSTS)	// Clean up
+			Return (1)		// Success
+		}
+
+		Return (0)
+	}
+
+
+	// SMBus Receive Byte
+	// Arg0:	Address
+	// Return:	0xffff = Failure, Data (8bit) = Success
+
+	Method (SRXB, 2, Serialized)
+	{
+
+		// Is the SMBus Controller Ready?
+		If (SRDY()) {
+			Return (0xffff)
+		}
+
+		// Receive Byte
+		Store (0, I2CE)		// SMBus Enable
+		Store (0xbf, HSTS)
+		Store (Or (Arg0, 1), TXSA)	// Write Address
+
+		Store (0x44, HCNT)	// Start
+
+		If (CMPL()) {
+			Or (HSTS, 0xff, HSTS)	// Clean up
+			Return (DAT0)		// Success
+		}
+
+		Return (0xffff)
+	}
+
+
+	// SMBus Write Byte
+	// Arg0:	Address
+	// Arg1:	Command
+	// Arg2:	Data
+	// Return:	1 = Success, 0=Failure
+
+	Method (SWRB, 3, Serialized)
+	{
+
+		// Is the SMBus Controller Ready?
+		If (SRDY()) {
+			Return (0)
+		}
+
+		// Send Byte
+		Store (0, I2CE)		// SMBus Enable
+		Store (0xbf, HSTS)
+		Store (Arg0, TXSA)	// Write Address
+		Store (Arg1, HCMD)	// Write Command
+		Store (Arg2, DAT0)	// Write Data
+
+		Store (0x48, HCNT)	// Start + Byte Protocol
+
+		If (CMPL()) {
+			Or (HSTS, 0xff, HSTS)	// Clean up
+			Return (1)		// Success
+		}
+
+		Return (0)
+	}
+
+
+	// SMBus Read Byte
+	// Arg0:	Address
+	// Arg1:	Command
+	// Return:	0xffff = Failure, Data (8bit) = Success
+
+	Method (SRDB, 2, Serialized)
+	{
+
+		// Is the SMBus Controller Ready?
+		If (SRDY()) {
+			Return (0xffff)
+		}
+
+		// Receive Byte
+		Store (0, I2CE)			// SMBus Enable
+		Store (0xbf, HSTS)
+		Store (Or (Arg0, 1), TXSA)	// Write Address
+		Store (Arg1, HCMD)		// Command
+
+		Store (0x48, HCNT)		// Start
+
+		If (CMPL()) {
+			Or (HSTS, 0xff, HSTS)	// Clean up
+			Return (DAT0)		// Success
+		}
+
+		Return (0xffff)
+	}
+#endif
+}