diff options
author | Stefan Reinauer <stepan@coresystems.de> | 2010-01-16 17:53:38 +0000 |
---|---|---|
committer | Stefan Reinauer <stepan@openbios.org> | 2010-01-16 17:53:38 +0000 |
commit | 9fe4d797a37671a65053add3f7cca27397db0b9b (patch) | |
tree | 5cabbdc8b6e7eb970891b55d1ea3727a4a71aca2 /src/southbridge/broadcom/bcm5785 | |
parent | 984e0f3a0c3a82339ef8afcf7f315f377e0c81fc (diff) |
coreboot used to have two different "APIs" for memory accesses:
read32(unsigned long addr) vs readl(void *addr)
and
write32(unsigned long addr, uint32_t value) vs writel(uint32_t value, void *addr)
read32 was only available in __PRE_RAM__ stage, while readl was used in stage2.
Some unclean implementations then made readl available to __PRE_RAM__ too which
results in really messy includes and code.
This patch fixes all code to use the read32/write32 variant, so that we can
remove readl/writel in another patch.
Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Ronald G. Minnich <rminnich@gmail.com>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5022 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/broadcom/bcm5785')
-rw-r--r-- | src/southbridge/broadcom/bcm5785/bcm5785_sata.c | 10 |
1 files changed, 5 insertions, 5 deletions
diff --git a/src/southbridge/broadcom/bcm5785/bcm5785_sata.c b/src/southbridge/broadcom/bcm5785/bcm5785_sata.c index 38cd6d4b3d..6818e6a2b0 100644 --- a/src/southbridge/broadcom/bcm5785/bcm5785_sata.c +++ b/src/southbridge/broadcom/bcm5785/bcm5785_sata.c @@ -52,13 +52,13 @@ static void sata_init(struct device *dev) printk_debug("init PHY...\n"); for(i=0; i<4; i++) { mmio = base + 0x100 * i; - byte = readb(mmio + 0x40); + byte = read8(mmio + 0x40); printk_debug("port %d PHY status = %02x\r\n", i, byte); if(byte & 0x4) {// bit 2 is set - byte = readb(mmio+0x48); - writeb(byte | 1, mmio + 0x48); - writeb(byte & (~1), mmio + 0x48); - byte = readb(mmio + 0x40); + byte = read8(mmio+0x48); + write8(mmio + 0x48, byte | 1); + write8(mmio + 0x48, byte & (~1)); + byte = read8(mmio + 0x40); printk_debug("after reset port %d PHY status = %02x\r\n", i, byte); } } |