diff options
author | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2019-02-08 20:16:06 +0200 |
---|---|---|
committer | Kyösti Mälkki <kyosti.malkki@gmail.com> | 2019-02-10 10:37:57 +0000 |
commit | 8da24f156f7f39f914ff9fa7c8e12c74c4cff80a (patch) | |
tree | e401c6169fc16aa76a5b88b92d4e5799254c8c52 /src/southbridge/amd/sb800 | |
parent | c3aa832bc3ee3e3ee1f9fa9d2edbf776abf5ce92 (diff) |
sb/amd/sb800: Drop comments about pci_locate_device()
Change-Id: I28a32d5c6dee792b6882e7ff45be6339016ad6ef
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/31301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Diffstat (limited to 'src/southbridge/amd/sb800')
-rw-r--r-- | src/southbridge/amd/sb800/early_setup.c | 33 | ||||
-rw-r--r-- | src/southbridge/amd/sb800/sata.c | 1 |
2 files changed, 16 insertions, 18 deletions
diff --git a/src/southbridge/amd/sb800/early_setup.c b/src/southbridge/amd/sb800/early_setup.c index c9b879a931..d7a6b88b76 100644 --- a/src/southbridge/amd/sb800/early_setup.c +++ b/src/southbridge/amd/sb800/early_setup.c @@ -78,7 +78,7 @@ static u8 get_sb800_revision(void) /* if (rev != 0) return rev; */ - dev = PCI_DEV(0, 0x14, 0);//pci_locate_device(PCI_ID(0x1002, 0x4385), 0); + dev = PCI_DEV(0, 0x14, 0); if (dev == PCI_DEV_INVALID) { die("SMBUS controller not found\n"); @@ -124,8 +124,7 @@ static void sb800_lpc_init(void) u8 reg8; pci_devfn_t dev; - //dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); /* SMBUS controller */ - dev = PCI_DEV(0, 0x14, 0); + dev = PCI_DEV(0, 0x14, 0); /* SMBUS controller */ /* NOTE: Set BootTimerDisable, otherwise it would keep rebooting!! * This bit has no meaning if debug strap is not enabled. So if the * board keeps rebooting and the code fails to reach here, we could @@ -139,7 +138,7 @@ static void sb800_lpc_init(void) reg8 |= 1 << 0; pmio_write(0xEC, reg8); - dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439d), 0); /* LPC Controller */ + dev = PCI_DEV(0, 0x14, 3); /* LPC Controller */ /* Decode port 0x3f8-0x3ff (Serial 0) */ //#warning Serial port decode on LPC is hardcoded to 0x3f8 reg8 = pci_read_config8(dev, 0x44); @@ -168,7 +167,7 @@ u32 get_sbdn(u32 bus) pci_devfn_t dev; /* Find the device. */ - dev = PCI_DEV(bus, 0x14, 0);//pci_locate_device_on_bus(PCI_ID(0x1002, 0x4385), bus); + dev = PCI_DEV(bus, 0x14, 0); return (dev >> 15) & 0x1f; } @@ -240,7 +239,7 @@ void sb800_pci_port80(void) pci_devfn_t dev; /* P2P Bridge */ - dev = PCI_DEV(0, 0x14, 4);//pci_locate_device(PCI_ID(0x1002, 0x4384), 0); + dev = PCI_DEV(0, 0x14, 4); /* Chip Control: Enable subtractive decoding */ byte = pci_read_config8(dev, 0x40); @@ -272,7 +271,7 @@ void sb800_pci_port80(void) pci_write_config8(dev, 0x04, byte); /* LPC controller */ - dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + dev = PCI_DEV(0, 0x14, 3); byte = pci_read_config8(dev, 0x4A); byte &= ~(1 << 5); /* disable lpc port 80 */ @@ -351,7 +350,7 @@ void sb800_lpc_port80(void) pmio_write(0xEC, byte); /* Enable port 80 LPC decode in pci function 3 configuration space. */ - dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + dev = PCI_DEV(0, 0x14, 3); byte = pci_read_config8(dev, 0x4a); byte |= 1 << 5; /* enable port 80 */ pci_write_config8(dev, 0x4a, byte); @@ -366,7 +365,7 @@ static void sb800_devices_por_init(void) printk(BIOS_INFO, "sb800_devices_por_init()\n"); /* SMBus Device, BDF:0-20-0 */ printk(BIOS_INFO, "sb800_devices_por_init(): SMBus Device, BDF:0-20-0\n"); - dev = PCI_DEV(0, 0x14, 0);//pci_locate_device(PCI_ID(0x1002, 0x4385), 0); + dev = PCI_DEV(0, 0x14, 0); if (dev == PCI_DEV_INVALID) { die("SMBUS controller not found\n"); @@ -434,7 +433,7 @@ static void sb800_devices_por_init(void) /* IDE Device, BDF:0-20-1 */ printk(BIOS_INFO, "sb800_devices_por_init(): IDE Device, BDF:0-20-1\n"); - dev = PCI_DEV(0, 0x14, 1);//pci_locate_device(PCI_ID(0x1002, 0x439C), 0); + dev = PCI_DEV(0, 0x14, 1); /* Disable prefetch */ byte = pci_read_config8(dev, 0x63); byte |= 0x1; @@ -442,7 +441,7 @@ static void sb800_devices_por_init(void) /* LPC Device, BDF:0-20-3 */ printk(BIOS_INFO, "sb800_devices_por_init(): LPC Device, BDF:0-20-3\n"); - dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + dev = PCI_DEV(0, 0x14, 3); /* DMA enable */ pci_write_config8(dev, 0x40, 0x04); @@ -461,7 +460,7 @@ static void sb800_devices_por_init(void) /* P2P Bridge, BDF:0-20-4, the configuration of the registers in this dev are copied from CIM, */ printk(BIOS_INFO, "sb800_devices_por_init(): P2P Bridge, BDF:0-20-4\n"); - dev = PCI_DEV(0, 0x14, 4);//pci_locate_device(PCI_ID(0x1002, 0x4384), 0); + dev = PCI_DEV(0, 0x14, 4); /* Arbiter enable. */ pci_write_config8(dev, 0x43, 0xff); @@ -478,7 +477,7 @@ static void sb800_devices_por_init(void) /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ printk(BIOS_INFO, "sb800_devices_por_init(): SATA Device, BDF:0-18-0\n"); - dev = PCI_DEV(0, 0x11, 0);//pci_locate_device(PCI_ID(0x1002, 0x4390), 0); + dev = PCI_DEV(0, 0x11, 0); /*PHY Global Control*/ pci_write_config16(dev, 0x86, 0x2C00); @@ -546,7 +545,7 @@ static void sb800_pci_cfg(void) u8 byte; /* SMBus Device, BDF:0-20-0 */ - dev = PCI_DEV(0, 0x14, 0);//pci_locate_device(PCI_ID(0x1002, 0x4385), 0); + dev = PCI_DEV(0, 0x14, 0); /* Enable watchdog decode timer */ byte = pci_read_config8(dev, 0x41); byte |= (1 << 3); @@ -559,7 +558,7 @@ static void sb800_pci_cfg(void) pmio_write(0xF0, byte); /* IDE Device, BDF:0-20-1 */ - dev = PCI_DEV(0, 0x14, 1);//pci_locate_device(PCI_ID(0x1002, 0x439C), 0); + dev = PCI_DEV(0, 0x14, 1); /* Enable IDE Explicit prefetch, 0x63[0] clear */ byte = pci_read_config8(dev, 0x63); byte &= 0xfe; @@ -569,7 +568,7 @@ static void sb800_pci_cfg(void) /* The code below is ported from old chipset. It is not * Mentioned in RPR. But I keep them. The registers and the * comments are compatible. */ - dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0); + dev = PCI_DEV(0, 0x14, 3); /* Enabling LPC DMA function. */ byte = pci_read_config8(dev, 0x40); byte |= (1 << 2); @@ -584,7 +583,7 @@ static void sb800_pci_cfg(void) pci_write_config8(dev, 0x78, byte); /* SATA Device, BDF:0-17-0, Non-Raid-5 SATA controller */ - dev = PCI_DEV(0, 0x11, 0);//pci_locate_device(PCI_ID(0x1002, 0x4390), 0); + dev = PCI_DEV(0, 0x11, 0); /* rpr7.12 SATA MSI and D3 Power State Capability. */ byte = pci_read_config8(dev, 0x40); byte |= 1 << 0; diff --git a/src/southbridge/amd/sb800/sata.c b/src/southbridge/amd/sb800/sata.c index acb899f6c2..9ac37947cb 100644 --- a/src/southbridge/amd/sb800/sata.c +++ b/src/southbridge/amd/sb800/sata.c @@ -87,7 +87,6 @@ static void sata_init(struct device *dev) struct device *sm_dev; /* SATA SMBus Disable */ - /* sm_dev = pci_locate_device(PCI_ID(0x1002, 0x4385), 0); */ sm_dev = pcidev_on_root(0x14, 0); /* get rev_id */ |