This sb800 code is derived from sb700.

Signed-off-by: Zheng Bao <zheng.bao@amd.com>
Acked-by: Stefan Reinauer <stepan@coreboot.org>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6277 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 253 insertions, 0 deletions

diff --git a/src/southbridge/amd/sb800/smbus.c b/src/southbridge/amd/sb800/smbus.c
new file mode 100644
index 0000000000..9db936c31f
--- /dev/null
+++ b/src/southbridge/amd/sb800/smbus.c
@@ -0,0 +1,253 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef  _SB800_SMBUS_C_
+#define  _SB800_SMBUS_C_
+
+#include "smbus.h"
+
+static inline void smbus_delay(void)
+{
+	outb(inb(0x80), 0x80);
+}
+
+static int smbus_wait_until_ready(u32 smbus_io_base)
+{
+	u32 loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		u8 val;
+		val = inb(smbus_io_base + SMBHSTSTAT);
+		val &= 0x1f;
+		if (val == 0) {	/* ready now */
+			return 0;
+		}
+		outb(val, smbus_io_base + SMBHSTSTAT);
+	} while (--loops);
+	return -2;		/* time out */
+}
+
+static int smbus_wait_until_done(u32 smbus_io_base)
+{
+	u32 loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		u8 val;
+
+		val = inb(smbus_io_base + SMBHSTSTAT);
+		val &= 0x1f;	/* mask off reserved bits */
+		if (val & 0x1c) {
+			return -5;	/* error */
+		}
+		if (val == 0x02) {
+			outb(val, smbus_io_base + SMBHSTSTAT);	/* clear status */
+			return 0;
+		}
+	} while (--loops);
+	return -3;		/* timeout */
+}
+
+int do_smbus_recv_byte(u32 smbus_io_base, u32 device)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 2) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	/* read results of transaction */
+	byte = inb(smbus_io_base + SMBHSTCMD);
+
+	return byte;
+}
+
+int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the command... */
+	outb(val, smbus_io_base + SMBHSTCMD);
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 2) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	return 0;
+}
+
+int do_smbus_read_byte(u32 smbus_io_base, u32 device,
+			      u32 address)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the command/address... */
+	outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 3) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	/* read results of transaction */
+	byte = inb(smbus_io_base + SMBHSTDAT0);
+
+	return byte;
+}
+
+int do_smbus_write_byte(u32 smbus_io_base, u32 device,
+			       u32 address, u8 val)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the command/address... */
+	outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+	/* output value */
+	outb(val, smbus_io_base + SMBHSTDAT0);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 3) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	return 0;
+}
+
+void alink_ab_indx(u32 reg_space, u32 reg_addr,
+			  u32 mask, u32 val)
+{
+	u32 tmp;
+
+	outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX);
+	tmp = inl(AB_DATA);
+	/* rpr 4.2
+	 * For certain revisions of the chip, the ABCFG registers,
+	 * with an address of 0x100NN (where 'N' is any hexadecimal
+	 * number), require an extra programming step.*/
+	outl(0, AB_INDX);
+
+	tmp &= ~mask;
+	tmp |= val;
+
+	/* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | reg_addr); */
+	outl((reg_space & 0x7) << 29 | reg_addr, AB_INDX);	/* probably we dont have to do it again. */
+	outl(tmp, AB_DATA);
+	outl(0, AB_INDX);
+}
+
+void alink_rc_indx(u32 reg_space, u32 reg_addr, u32 port,
+			  u32 mask, u32 val)
+{
+	u32 tmp;
+
+	outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX);
+	tmp = inl(AB_DATA);
+	/* rpr 4.2
+	 * For certain revisions of the chip, the ABCFG registers,
+	 * with an address of 0x100NN (where 'N' is any hexadecimal
+	 * number), require an extra programming step.*/
+	outl(0, AB_INDX);
+
+	tmp &= ~mask;
+	tmp |= val;
+
+	//printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<29 | (port&3) << 24 | reg_addr);
+	outl((reg_space & 0x7) << 29 | (port & 3) << 24 | reg_addr, AB_INDX);	/* probably we dont have to do it again. */
+	outl(tmp, AB_DATA);
+	outl(0, AB_INDX);
+}
+
+/* space = 0: AX_INDXC, AX_DATAC
+ * space = 1: AX_INDXP, AX_DATAP
+ */
+void alink_ax_indx(u32 space /*c or p? */ , u32 axindc,
+			  u32 mask, u32 val)
+{
+	u32 tmp;
+
+	/* read axindc to tmp */
+	outl(space << 29 | space << 3 | 0x30, AB_INDX);
+	outl(axindc, AB_DATA);
+	outl(0, AB_INDX);
+	outl(space << 29 | space << 3 | 0x34, AB_INDX);
+	tmp = inl(AB_DATA);
+	outl(0, AB_INDX);
+
+	tmp &= ~mask;
+	tmp |= val;
+
+	/* write tmp */
+	outl(space << 29 | space << 3 | 0x30, AB_INDX);
+	outl(axindc, AB_DATA);
+	outl(0, AB_INDX);
+	outl(space << 29 | space << 3 | 0x34, AB_INDX);
+	outl(tmp, AB_DATA);
+	outl(0, AB_INDX);
+}
+#endif