summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/sb800/sb800.c
diff options
context:
space:
mode:
authorZheng Bao <zheng.bao@amd.com>2011-01-20 04:45:48 +0000
committerZheng Bao <Zheng.Bao@amd.com>2011-01-20 04:45:48 +0000
commitd098575b0e8440da33eceaf715967ea8273bbaf2 (patch)
tree10bb69008c6f512fa1bf9ac0563679ca63510471 /src/southbridge/amd/sb800/sb800.c
parentdd676ddc54f8d210f9c62a0f6a259dd4482c9b1b (diff)
This sb800 code is derived from sb700.
Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6277 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/amd/sb800/sb800.c')
-rw-r--r--src/southbridge/amd/sb800/sb800.c393
1 files changed, 393 insertions, 0 deletions
diff --git a/src/southbridge/amd/sb800/sb800.c b/src/southbridge/amd/sb800/sb800.c
new file mode 100644
index 0000000000..f6b7d80f3b
--- /dev/null
+++ b/src/southbridge/amd/sb800/sb800.c
@@ -0,0 +1,393 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <console/console.h>
+
+#include <arch/io.h>
+
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ids.h>
+#include <device/pci_ops.h>
+#include "sb800.h"
+#include "smbus.h"
+
+static device_t find_sm_dev(device_t dev, u32 devfn)
+{
+ device_t sm_dev;
+
+ sm_dev = dev_find_slot(dev->bus->secondary, devfn);
+ if (!sm_dev)
+ return sm_dev;
+
+ if ((sm_dev->vendor != PCI_VENDOR_ID_ATI) ||
+ ((sm_dev->device != PCI_DEVICE_ID_ATI_SB800_SM))) {
+ u32 id;
+ id = pci_read_config32(sm_dev, PCI_VENDOR_ID);
+ if ((id !=
+ (PCI_VENDOR_ID_ATI | (PCI_DEVICE_ID_ATI_SB800_SM << 16))))
+ {
+ sm_dev = 0;
+ }
+ }
+
+ return sm_dev;
+}
+
+void set_sm_enable_bits(device_t sm_dev, u32 reg_pos, u32 mask, u32 val)
+{
+ u32 reg_old, reg;
+ reg = reg_old = pci_read_config32(sm_dev, reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pci_write_config32(sm_dev, reg_pos, reg);
+ }
+}
+
+static void pmio_write_index(u16 port_base, u8 reg, u8 value)
+{
+ outb(reg, port_base);
+ outb(value, port_base + 1);
+}
+
+static u8 pmio_read_index(u16 port_base, u8 reg)
+{
+ outb(reg, port_base);
+ return inb(port_base + 1);
+}
+
+void pm_iowrite(u8 reg, u8 value)
+{
+ pmio_write_index(PM_INDEX, reg, value);
+}
+
+u8 pm_ioread(u8 reg)
+{
+ return pmio_read_index(PM_INDEX, reg);
+}
+
+void pm2_iowrite(u8 reg, u8 value)
+{
+ pmio_write_index(PM2_INDEX, reg, value);
+}
+
+u8 pm2_ioread(u8 reg)
+{
+ return pmio_read_index(PM2_INDEX, reg);
+}
+
+static void set_pmio_enable_bits(u32 reg_pos, u32 mask, u32 val)
+{
+ u8 reg_old, reg;
+ reg = reg_old = pm_ioread(reg_pos);
+ reg &= ~mask;
+ reg |= val;
+ if (reg != reg_old) {
+ pm_iowrite(reg_pos, reg);
+ }
+}
+
+u16 tx_convert_table[] = {
+ [0x0] = 0xFFFF,
+ [0x1] = 0xFFFE,
+ [0x2] = 0xFFFC,
+ [0x3] = 0xFFF8,
+ [0x4] = 0xFFF0,
+ [0x5] = 0xFFE0,
+ [0x6] = 0xFFC0,
+ [0x7] = 0xFF80,
+ [0x8] = 0xFF00,
+ [0x9] = 0xFE00,
+ [0xA] = 0xFC00,
+ [0xB] = 0xF800,
+ [0xC] = 0xF000,
+ [0xD] = 0xE000,
+ [0xE] = 0xC000,
+ [0xF] = 0x8000
+};
+
+u16 rx_convert_table[] = {
+ [0x0] = 0x0001,
+ [0x1] = 0x0003,
+ [0x2] = 0x0007,
+ [0x3] = 0x000F,
+ [0x4] = 0x001F,
+ [0x5] = 0x003F,
+ [0x6] = 0x007F,
+ [0x7] = 0x00FF,
+ [0x8] = 0x01FF,
+ [0x9] = 0x03FF,
+ [0xA] = 0x07FF,
+ [0xB] = 0x0FFF,
+ [0xC] = 0x1FFF,
+ [0xD] = 0x3FFF,
+ [0xE] = 0x7FFF,
+ [0xF] = 0xFFFF
+};
+
+/* PCIe General Purpose Ports */
+/* v:1814, d:3090. cp421A */
+static void set_sb800_gpp(device_t dev)
+{
+ struct southbridge_amd_sb800_config *conf;
+ u32 imp_rb, lc_status;
+ u8 port;
+
+ conf = dev->chip_info;
+ port = dev->path.pci.devfn & 3;
+
+ /* 5.1 GPP Lane Configuration */
+ /* To support one of 4 legal configurations:
+ * 0000: PortA lanes[3:0]
+ * 0001: N/A
+ * 0010: PortA lanes[1:0], PortB lanes[3:2]
+ * 0011: PortA lanes[1:0], PortB lane2, PortC lane3
+ * 0100: PortA lane0, PortB lane1, PortC lane2, PortD lane3.
+ * Other combinations are not supported.
+ */
+ /* CIMx: Set abcfg:0x90[20] = 1 to enable GPP bridge multi-function */
+ abcfg_reg(0x90, 1 << 20, 1 << 20);
+
+ printk(BIOS_DEBUG, "set_sb800_gpp() 1\n");
+ //abcfg_reg(0xC0, 0xF << 0, 0x4 << 0); /* bimini:4; tarpon:3 */
+ abcfg_reg(0xC0, 0xF << 0, (conf->gpp_configuration & 0xF) << 0); /* bimini:4; tarpon:3 */
+
+ printk(BIOS_DEBUG, "set_sb800_gpp() 2,\n");
+ /* 5.2 Enabling GPP Port A/B/C/D */
+ //abcfg_reg(0xC0, 0xF << 4, 0x1 << 4);
+ abcfg_reg(0xC0, 0xF << 4, dev->enabled ? 0x1 << (4 + port) : 0);
+
+ printk(BIOS_DEBUG, "set_sb800_gpp() 3\n");
+ /* 5.3 Releasing GPP Reset */
+ abcfg_reg(0xC0, 0x1 << 8, 0x0 << 8);
+
+ /* release training */
+ abcfg_reg(0xC0, 0xF << 12, 0x0 << 12);
+ /* 5.4 Power Saving Feature for GPP Lanes. Skip */
+ /* 5.5 PCIe Ports De-emphasis Settings. Skip */
+ abcfg_reg(0x340, 1 << 21, 0 << 21);
+ abcfg_reg(0x344, 1 << 21, 0 << 21);
+ abcfg_reg(0x348, 1 << 21, 0 << 21);
+ abcfg_reg(0x34C, 1 << 21, 0 << 21);
+ /* 5.6 PCIe PHY Calibration Impedance Value Setting */
+ /* AXINDC_Reg 0x60: TX_IMP_RB */
+ outl(0x30, 0xCD8);
+ outl(0x60, 0xCDC);
+ outl(0x34, 0xCD8);
+ imp_rb = inl(0xCDC);
+
+ printk(BIOS_DEBUG, "imp_rb 1=%x\n", imp_rb);
+ /* tx */
+ abcfg_reg(0xA4, 0x1FFF, (rx_convert_table[(imp_rb>>8)&0xF]) & 0x1FFF);
+ abcfg_reg(0xA4, 0x1FFF<<19, ((tx_convert_table[(imp_rb>>4)&0xF] >> 3) & 0x1FFF) << 19);
+
+ /* 5.4. */
+ abcfg_reg(0xA0, 3 << 12, 3 << 12);
+
+ axindxp_reg(0xa0, 0xf<<4, 3<<4);
+ rcindxp_reg(0xA0, 0, 0xF << 4, 1 << 0);
+ rcindxp_reg(0xA0, 1, 0xF << 4, 1 << 0);
+ rcindxp_reg(0xA0, 2, 0xF << 4, 1 << 0);
+ rcindxp_reg(0xA0, 3, 0xF << 4, 1 << 0);
+
+ /* 5.8 Disabling Serial Number Capability */
+ abcfg_reg(0x330, 1 << 26, 0 << 26);
+
+ abcfg_reg(0x50, 0xFFFFFFFF, 0x04000004);
+ abcfg_reg(0x54, 0xFFFFFFFF, 0x00040000);
+ abcfg_reg(0x80, 0xFFFFFFFF, 0x03060001);
+ abcfg_reg(0x90, 0xFFFFFFFF, 0x00300000);
+ abcfg_reg(0x98, 0xFFFFFFFF, 0x03034700);
+
+ pci_write_config32(dev, 0x80, 0x00000006);
+ /* Set PCIEIND_P:PCIE_RX_CNTL[RX_RCB_CPL_TIMEOUT_MODE] (0x70:[19]) = 1 */
+ rcindxp_reg(0x70, 0, 1 << 19, 1 << 19);
+ //outl(3<<29|0<<24|0x70, 0xCD8);
+ /* Set PCIEIND_P:PCIE_TX_CNTL[TX_FLUSH_TLP_DIS] (0x20:[19]) = 0 */
+ rcindxp_reg(0x20, 0, 1 << 19, 0 << 19);
+ printk(BIOS_DEBUG, "imp_rb 5=%x\n", imp_rb);
+ outl(3<<29|0<<24|0xA5, 0xCD8);
+ lc_status = inl(0xCDC);
+ printk(BIOS_DEBUG, "lc_status=%x\n", lc_status);
+}
+
+void sb800_enable(device_t dev)
+{
+ device_t sm_dev = 0;
+ device_t bus_dev = 0;
+ int index = -1;
+ u32 deviceid;
+ u32 vendorid;
+
+ /* struct southbridge_ati_sb800_config *conf; */
+ /* conf = dev->chip_info; */
+ int i;
+
+ u32 devfn, dword;
+
+ printk(BIOS_DEBUG, "sb800_enable()\n");
+
+ /*
+ * 0:11.0 SATA bit 8 of pmio 0xDA : 1 - enable
+ * 0:12.0 OHCI-USB1 bit 0 of pmio 0xEF
+ * 0:12.2 EHCI-USB1 bit 1 of pmio 0xEF
+ * 0:13.0 OHCI-USB2 bit 2 of pmio 0xEF
+ * 0:13.2 EHCI-USB2 bit 3 of pmio 0xEF
+ * 0:16.1 OHCI-USB3 bit 4 of pmio 0xEF
+ * 0:16.2 EHCI-USB3 bit 5 of pmio 0xEF
+ * 0:14.5 OHCI-USB4 bit 6 of pmio 0xEF
+ * 0:14.0 SMBUS 0
+ * 0:14.1 IDE 1
+ * 0:14.2 HDA bit 0 of pm_io 0xEB : 1 - enable
+ * 0:14.3 LPC bit 0 of pm_io 0xEC : 1 - enable
+ * 0:14.4 PCI bit 0 of pm_io 0xEA : 0 - enable
+ * 0:14.6 GEC bit 0 of pm_io 0xF6 : 0 - enable
+ */
+ if (dev->device == 0x0000) {
+ vendorid = pci_read_config32(dev, PCI_VENDOR_ID);
+ deviceid = (vendorid >> 16) & 0xffff;
+ vendorid &= 0xffff;
+ } else {
+ vendorid = dev->vendor;
+ deviceid = dev->device;
+ }
+ bus_dev = dev->bus->dev;
+ if ((bus_dev->vendor == PCI_VENDOR_ID_ATI) &&
+ (bus_dev->device == PCI_DEVICE_ID_ATI_SB800_PCI)) {
+ devfn = (bus_dev->path.pci.devfn) & ~7;
+ sm_dev = find_sm_dev(bus_dev, devfn);
+ if (!sm_dev)
+ return;
+
+ /* something under 00:01.0 */
+ switch (dev->path.pci.devfn) {
+ case 5 << 3:
+ ;
+ }
+
+ return;
+ }
+ printk(BIOS_DEBUG, "sb800_enable() 1\n");
+
+ i = (dev->path.pci.devfn) & ~7;
+ i += (3 << 3);
+ for (devfn = (0x14 << 3); devfn <= i; devfn += (1 << 3)) {
+ sm_dev = find_sm_dev(dev, devfn);
+ if (sm_dev)
+ break;
+ }
+ if (!sm_dev)
+ return;
+ printk(BIOS_DEBUG, "sb800_enable() 2\n");
+
+ switch (dev->path.pci.devfn - (devfn - (0x14 << 3))) {
+ case (0x11 << 3) | 0:
+ index = 8;
+ set_pmio_enable_bits(0xDA, 1 << 0,
+ (dev->enabled ? 1 : 0) << 0);
+ /* Set the device ID of SATA as 0x4390 to reduce the confusing. */
+ dword = pci_read_config32(dev, 0x40);
+ dword |= 1 << 0;
+ pci_write_config32(dev, 0x40, dword);
+ pci_write_config16(dev, 0x2, 0x4390);
+ dword &= ~1;
+ pci_write_config32(dev, 0x40, dword);//for (;;);
+ index += 32 * 3;
+ break;
+ case (0x12 << 3) | 0:
+ case (0x12 << 3) | 2:
+ index = (dev->path.pci.devfn & 0x3) / 2;
+ set_pmio_enable_bits(0xEF, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ break;
+ case (0x13 << 3) | 0:
+ case (0x13 << 3) | 2:
+ index = (dev->path.pci.devfn & 0x3) / 2 + 2;
+ set_pmio_enable_bits(0xEF, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ index += 32 * 2;
+ break;
+ case (0x14 << 3) | 0:
+ index = 0;
+ break;
+ case (0x14 << 3) | 1:
+ index = 1;
+ set_pmio_enable_bits(0xDA, 1 << 3,
+ (dev->enabled ? 0 : 1) << 3);
+ break;
+ case (0x14 << 3) | 2:
+ index = 0;
+ set_pmio_enable_bits(0xEB, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ break;
+ case (0x14 << 3) | 3:
+ index = 0;
+ set_pmio_enable_bits(0xEC, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ index += 32 * 1;
+ break;
+ case (0x14 << 3) | 4:
+ index = 0;
+ set_pmio_enable_bits(0xEA, 1 << index,
+ (dev->enabled ? 0 : 1) << index);
+ break;
+ case (0x14 << 3) | 5:
+ index = 6;
+ set_pmio_enable_bits(0xEF, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ break;
+ case (0x14 << 3) | 6:
+ /* From linux-2.6.32 to 2.6.34, the broadcom has problems
+ * about the sequence of installing drivers. The solution is
+ * modifying the file "/etc/rc.local", or just running:
+ *
+ * touch /var/lock/subsys/local
+ * modprobe -r tg3
+ * modprobe broadcom
+ * modprobe tg3
+ */
+ index = 0;
+ set_pmio_enable_bits(0xF6, 1 << index,
+ (dev->enabled ? 0 : 1) << index);
+ break;
+ case (0x15 << 3) | 0:
+ set_sb800_gpp(dev);
+ index = 4;
+ break;
+ case (0x15 << 3) | 1:
+ case (0x15 << 3) | 2:
+ case (0x15 << 3) | 3:
+ break;
+ case (0x16 << 3) | 0:
+ case (0x16 << 3) | 2:
+ index = (dev->path.pci.devfn & 0x3) / 2 + 4;
+ set_pmio_enable_bits(0xEF, 1 << index,
+ (dev->enabled ? 1 : 0) << index);
+ break;
+ default:
+ printk(BIOS_DEBUG, "unknown dev: %s deviceid=%4x\n", dev_path(dev),
+ deviceid);
+ }
+}
+
+struct chip_operations southbridge_amd_sb800_ops = {
+ CHIP_NAME("ATI SB800")
+ .enable_dev = sb800_enable,
+};