- move EHCI_BAR_INDEX to ehci.h - it's constant as per EHCI spec 2.3.1

- move EHCI_BAR and EHCI_DEBUG_OFFSET to Kconfig to be set by USB debug port enabled southbridges
- drop USB debug code includes from romstage.cs and use romstage-srcs in the build system instead

Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Acked-by: Uwe Hermann <uwe@hermann-uwe.de>


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5911 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 16 insertions, 7 deletions

diff --git a/src/southbridge/amd/sb700/Kconfig b/src/southbridge/amd/sb700/Kconfig
index 5ceb446a82..97768d18e5 100644
--- a/src/southbridge/amd/sb700/Kconfig
+++ b/src/southbridge/amd/sb700/Kconfig
@@ -27,3 +27,11 @@ config SOUTHBRIDGE_AMD_SB700_SKIP_ISA_DMA_INIT
 	default n
 	depends on SOUTHBRIDGE_AMD_SB700
 
+config EHCI_BAR
+	hex
+	default 0xfef00000 if SOUTHBRIDGE_AMD_SB700
+
+config EHCI_DEBUG_OFFSET
+	hex
+	default 0xe0 if SOUTHBRIDGE_AMD_SB700
+
diff --git a/src/southbridge/amd/sb700/Makefile.inc b/src/southbridge/amd/sb700/Makefile.inc
index 8e6868bb17..dd97df31e6 100644
--- a/src/southbridge/amd/sb700/Makefile.inc
+++ b/src/southbridge/amd/sb700/Makefile.inc
@@ -7,3 +7,4 @@ driver-y += sb700_sata.c
 driver-y += sb700_hda.c
 driver-y += sb700_pci.c
 ramstage-y += sb700_reset.c
+romstage-y += sb700_enable_usbdebug.c
diff --git a/src/southbridge/amd/sb700/sb700.h b/src/southbridge/amd/sb700/sb700.h
index d4107a942e..088bba611d 100644
--- a/src/southbridge/amd/sb700/sb700.h
+++ b/src/southbridge/amd/sb700/sb700.h
@@ -59,4 +59,5 @@ void sb700_setup_sata_phys(struct device *dev);
 
 #endif
 
+void sb700_enable_usbdebug(unsigned int port);
 #endif /* SB700_H */
diff --git a/src/southbridge/amd/sb700/sb700_enable_usbdebug.c b/src/southbridge/amd/sb700/sb700_enable_usbdebug.c
index 02d3900047..d74a9bbc9f 100644
--- a/src/southbridge/amd/sb700/sb700_enable_usbdebug.c
+++ b/src/southbridge/amd/sb700/sb700_enable_usbdebug.c
@@ -19,14 +19,13 @@
  */
 
 #include <stdint.h>
+#include <arch/io.h>
+#include <arch/romcc_io.h>
 #include <usbdebug.h>
 #include <device/pci_def.h>
+#include "sb700.h"
 
-#define EHCI_BAR		0xFEF00000	/* EHCI BAR address */
-#define EHCI_BAR_INDEX		0x10		/* TODO: DBUG_PRT[31:29] */
-#define EHCI_DEBUG_OFFSET	0xE0		/* Hardcoded to 0xE0 */
-
-#define EHCI_EOR		(EHCI_BAR + 0x20)
+#define EHCI_EOR		(CONFIG_EHCI_BAR + 0x20)
 #define DEBUGPORT_MISC_CONTROL	(EHCI_EOR + 0x80)
 
 void set_debug_port(unsigned int port)
@@ -46,12 +45,12 @@ void set_debug_port(unsigned int port)
  * This code currently only supports the first one, i.e., USB Debug devices
  * attached to physical USB ports belonging to the first EHCI device.
  */
-static void sb700_enable_usbdebug(unsigned int port)
+void sb700_enable_usbdebug(unsigned int port)
 {
 	device_t dev = PCI_DEV(0, 0x12, 2); /* USB EHCI, D18:F2 */
 
 	/* Set the EHCI BAR address. */
-	pci_write_config32(dev, EHCI_BAR_INDEX, EHCI_BAR);
+	pci_write_config32(dev, EHCI_BAR_INDEX, CONFIG_EHCI_BAR);
 
 	/* Enable access to the EHCI memory space registers. */
 	pci_write_config8(dev, PCI_COMMAND, PCI_COMMAND_MEMORY);