first round name simplification. drop the <component>_ prefix.

the prefix was introduced in the early v2 tree many years ago
because our old build system "newconfig" could not handle two files with
the same name in different paths like /path/to/usb.c and
/another/path/to/usb.c correctly. Only one of the files would end up
being compiled into the final image.

Since Kconfig (actually since shortly before we switched to Kconfig) we
don't suffer from that problem anymore. So we could drop the sb700_
prefix from all those filenames (or, the <componentname>_ prefix in general)

- makes it easier to fork off a new chipset
- makes it easier to diff against other chipsets
- storing redundant information in filenames seems wrong

Signed-off-by: <stepan@coresystems.de>

Acked-by: Patrick Georgi <patrick@georgi-clan.de>
Acked-by: Peter Stuge <peter@stuge.se>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6149 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 224 insertions, 0 deletions

diff --git a/src/southbridge/amd/sb700/smbus.c b/src/southbridge/amd/sb700/smbus.c
new file mode 100644
index 0000000000..e47bceed47
--- /dev/null
+++ b/src/southbridge/amd/sb700/smbus.c
@@ -0,0 +1,224 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2010 Advanced Micro Devices, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
+ */
+
+#ifndef _SB700_SMBUS_C_
+#define _SB700_SMBUS_C_
+
+#include "smbus.h"
+
+static inline void smbus_delay(void)
+{
+	outb(inb(0x80), 0x80);
+}
+
+static int smbus_wait_until_ready(u32 smbus_io_base)
+{
+	u32 loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		u8 val;
+		val = inb(smbus_io_base + SMBHSTSTAT);
+		val &= 0x1f;
+		if (val == 0) {	/* ready now */
+			return 0;
+		}
+		outb(val, smbus_io_base + SMBHSTSTAT);
+	} while (--loops);
+	return -2;		/* time out */
+}
+
+static int smbus_wait_until_done(u32 smbus_io_base)
+{
+	u32 loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		u8 val;
+
+		val = inb(smbus_io_base + SMBHSTSTAT);
+		val &= 0x1f;	/* mask off reserved bits */
+		if (val & 0x1c) {
+			return -5;	/* error */
+		}
+		if (val == 0x02) {
+			outb(val, smbus_io_base + SMBHSTSTAT);	/* clear status */
+			return 0;
+		}
+	} while (--loops);
+	return -3;		/* timeout */
+}
+
+int do_smbus_recv_byte(u32 smbus_io_base, u32 device)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 2) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	/* read results of transaction */
+	byte = inb(smbus_io_base + SMBHSTCMD);
+
+	return byte;
+}
+
+int do_smbus_send_byte(u32 smbus_io_base, u32 device, u8 val)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the command... */
+	outb(val, smbus_io_base + SMBHSTCMD);
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 2) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	return 0;
+}
+
+int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the command/address... */
+	outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 3) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	/* read results of transaction */
+	byte = inb(smbus_io_base + SMBHSTDAT0);
+
+	return byte;
+}
+
+int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val)
+{
+	u8 byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return -2;	/* not ready */
+	}
+
+	/* set the command/address... */
+	outb(address & 0xff, smbus_io_base + SMBHSTCMD);
+
+	/* set the device I'm talking too */
+	outb(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+
+	/* output value */
+	outb(val, smbus_io_base + SMBHSTDAT0);
+
+	byte = inb(smbus_io_base + SMBHSTCTRL);
+	byte &= 0xe3;		/* Clear [4:2] */
+	byte |= (1 << 3) | (1 << 6);	/* Byte data read/write command, start the command */
+	outb(byte, smbus_io_base + SMBHSTCTRL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return -3;	/* timeout or error */
+	}
+
+	return 0;
+}
+
+static void alink_ab_indx(u32 reg_space, u32 reg_addr, u32 mask, u32 val)
+{
+	u32 tmp;
+
+	outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX);
+	tmp = inl(AB_DATA);
+	/* rpr 4.2
+	 * For certain revisions of the chip, the ABCFG registers,
+	 * with an address of 0x100NN (where 'N' is any hexadecimal
+	 * number), require an extra programming step.*/
+	reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL;
+
+	tmp &= ~mask;
+	tmp |= val;
+
+	/* printk(BIOS_DEBUG, "about write %x, index=%x", tmp, (reg_space&0x3)<<30 | reg_addr); */
+	outl((reg_space & 0x3) << 30 | reg_addr, AB_INDX);	/* probably we dont have to do it again. */
+	outl(tmp, AB_DATA);
+	reg_addr & 0x10000 ? outl(0, AB_INDX) : NULL;
+}
+
+/* space = 0: AX_INDXC, AX_DATAC
+ * space = 1: AX_INDXP, AX_DATAP
+ */
+static inline void alink_ax_indx(u32 space /*c or p? */ , u32 axindc,
+			  u32 mask, u32 val)
+{
+	u32 tmp;
+
+	/* read axindc to tmp */
+	outl(space << 30 | space << 3 | 0x30, AB_INDX);
+	outl(axindc, AB_DATA);
+	outl(space << 30 | space << 3 | 0x34, AB_INDX);
+	tmp = inl(AB_DATA);
+
+	tmp &= ~mask;
+	tmp |= val;
+
+	/* write tmp */
+	outl(space << 30 | space << 3 | 0x30, AB_INDX);
+	outl(axindc, AB_DATA);
+	outl(space << 30 | space << 3 | 0x34, AB_INDX);
+	outl(tmp, AB_DATA);
+}
+#endif