diff options
author | Stefan Reinauer <stefan.reinauer@coreboot.org> | 2011-04-21 20:45:45 +0000 |
---|---|---|
committer | Stefan Reinauer <stepan@openbios.org> | 2011-04-21 20:45:45 +0000 |
commit | d4814bd41c080fb9dda87c762fcaecf4e72fc996 (patch) | |
tree | 57a44f8cbfad3642084b8e3d092e230b8f7e7198 /src/southbridge/amd/sb700/early_setup.c | |
parent | 1d888a97849d68a7136da558c3697c7f2a8d898a (diff) |
more ifdef -> if fixes
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6536 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/southbridge/amd/sb700/early_setup.c')
-rw-r--r-- | src/southbridge/amd/sb700/early_setup.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/src/southbridge/amd/sb700/early_setup.c b/src/southbridge/amd/sb700/early_setup.c index 7345cdeca3..a5e76c7a05 100644 --- a/src/southbridge/amd/sb700/early_setup.c +++ b/src/southbridge/amd/sb700/early_setup.c @@ -149,7 +149,7 @@ static void sb7xx_51xx_lpc_init(void) reg32 |= 1 << 20; pci_write_config32(dev, 0x64, reg32); -#ifdef CONFIG_SOUTHBRIDGE_AMD_SP5100 +#if CONFIG_SOUTHBRIDGE_AMD_SP5100 post_code(0x66); dev = pci_locate_device(PCI_ID(0x1002, 0x439d), 0); /* LPC Controller */ reg8 = pci_read_config8(dev, 0xBB); @@ -163,7 +163,7 @@ static void sb7xx_51xx_lpc_init(void) // XXX Serial port decode on LPC is hardcoded to 0x3f8 reg8 = pci_read_config8(dev, 0x44); reg8 |= 1 << 6; -#ifdef CONFIG_SOUTHBRIDGE_AMD_SP5100 +#if CONFIG_SOUTHBRIDGE_AMD_SP5100 #if CONFIG_TTYS0_BASE == 0x2f8 reg8 |= 1 << 7; #endif @@ -369,7 +369,7 @@ static void sb700_devices_por_init(void) { device_t dev; u8 byte; -#ifdef CONFIG_SOUTHBRIDGE_AMD_SP5100 +#if CONFIG_SOUTHBRIDGE_AMD_SP5100 u32 dword; #endif @@ -505,7 +505,7 @@ static void sb700_devices_por_init(void) /* Enable PCIB_DUAL_EN_UP will fix potential problem with PCI cards. */ pci_write_config8(dev, 0x50, 0x01); -#ifdef CONFIG_SOUTHBRIDGE_AMD_SP5100 +#if CONFIG_SOUTHBRIDGE_AMD_SP5100 /* SP5100 default SATA mode is RAID5 MODE */ dev = pci_locate_device(PCI_ID(0x1002, 0x4393), 0); /* Set SATA Operation Mode, Set to IDE mode */ |