- Bump the LinuxBIOS major version

- Rename chip_config chip_operations throughout the tree
- Fix Config.lb on most of the Opteron Ports
- Fix the amd 8000 chipset support for setting the subsystem vendor and device ids
- Add detection of devices that are on the motherboard (i.e. In Config.lb)
- Baby step in getting the resource limit handling correct, Ignore fixed resources
- Only call enable_childrens_resources on devices we know will have children
  For some busses like i2c it is non-sense and we don't want it.
- Set the resource limits for pnp devices resources.
- Improve the resource size detection for pnp devices.
- Added a configuration register to amd8111_ide.c so we can enable/disable individual ide channels
- Added a header file to hold the prototype of isa_dma_init
- Fixed most of the superio chips so the should work now, the via superio pci device is the exception.
- The code compiles and runs so it is time for me to go to bed.


git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1698 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 224 insertions, 0 deletions

diff --git a/src/southbridge/amd/amd8111/amd8111_smbus.h b/src/southbridge/amd/amd8111/amd8111_smbus.h
new file mode 100644
index 0000000000..b5799666e9
--- /dev/null
+++ b/src/southbridge/amd/amd8111/amd8111_smbus.h
@@ -0,0 +1,224 @@
+#include <device/smbus_def.h>
+
+#define SMBGSTATUS 0xe0
+#define SMBGCTL    0xe2
+#define SMBHSTADDR 0xe4
+#define SMBHSTDAT  0xe6
+#define SMBHSTCMD  0xe8
+#define SMBHSTFIFO 0xe9
+
+#define SMBUS_TIMEOUT (100*1000*10)
+#define SMBUS_STATUS_MASK 0xfbff
+
+static inline void smbus_delay(void)
+{
+	outb(0x80, 0x80);
+}
+
+static int smbus_wait_until_ready(unsigned smbus_io_base)
+{
+	unsigned long loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		unsigned short val;
+		smbus_delay();
+		val = inw(smbus_io_base + SMBGSTATUS);
+		if ((val & 0x800) == 0) {
+			break;
+		}
+		if(loops == (SMBUS_TIMEOUT / 2)) {
+			outw(inw(smbus_io_base + SMBGSTATUS), 
+				smbus_io_base + SMBGSTATUS);
+		}
+	} while(--loops);
+	return loops?0:SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+}
+
+static int smbus_wait_until_done(unsigned smbus_io_base)
+{
+	unsigned long loops;
+	loops = SMBUS_TIMEOUT;
+	do {
+		unsigned short val;
+		smbus_delay();
+		
+		val = inw(smbus_io_base + SMBGSTATUS);
+		if (((val & 0x8) == 0) | ((val & 0x0037) != 0)) {
+			break;
+		}
+	} while(--loops);
+	return loops?0:SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+}
+
+static int do_smbus_recv_byte(unsigned smbus_io_base, unsigned device)
+{
+	unsigned global_status_register;
+	unsigned byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+	}
+	
+	/* setup transaction */
+	/* disable interrupts */
+	outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+	/* set the device I'm talking too */
+	outw(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+	/* set the command/address... */
+	outb(0, smbus_io_base + SMBHSTCMD);
+	/* set up for a send byte */
+	outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL);
+
+	/* clear any lingering errors, so the transaction will run */
+	/* Do I need to write the bits to a 1 to clear an error? */
+	outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+	/* set the data word...*/
+	outw(0, smbus_io_base + SMBHSTDAT);
+
+	/* start the command */
+	outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+	}
+
+	global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+	/* read results of transaction */
+	byte = inw(smbus_io_base + SMBHSTDAT) & 0xff;
+
+	if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+		return SMBUS_ERROR;
+	}
+	return byte;
+}
+
+static int do_smbus_send_byte(unsigned smbus_io_base, unsigned device, unsigned value)
+{
+	unsigned global_status_register;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+	}
+	
+	/* setup transaction */
+	/* disable interrupts */
+	outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+	/* set the device I'm talking too */
+	outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+	/* set the command/address... */
+	outb(0, smbus_io_base + SMBHSTCMD);
+	/* set up for a send byte */
+	outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x1), smbus_io_base + SMBGCTL);
+
+	/* clear any lingering errors, so the transaction will run */
+	/* Do I need to write the bits to a 1 to clear an error? */
+	outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+	/* set the data word...*/
+	outw(value, smbus_io_base + SMBHSTDAT);
+
+	/* start the command */
+	outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+	}
+	global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+	if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+		return SMBUS_ERROR;
+	}
+	return 0;
+}
+
+
+static int do_smbus_read_byte(unsigned smbus_io_base, unsigned device, unsigned address)
+{
+	unsigned global_status_register;
+	unsigned byte;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+	}
+	
+	/* setup transaction */
+	/* disable interrupts */
+	outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+	/* set the device I'm talking too */
+	outw(((device & 0x7f) << 1) | 1, smbus_io_base + SMBHSTADDR);
+	/* set the command/address... */
+	outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+	/* set up for a byte data read */
+	outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x2), smbus_io_base + SMBGCTL);
+
+	/* clear any lingering errors, so the transaction will run */
+	/* Do I need to write the bits to a 1 to clear an error? */
+	outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+	/* clear the data word...*/
+	outw(0, smbus_io_base + SMBHSTDAT);
+
+	/* start the command */
+	outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+	}
+
+	global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+	/* read results of transaction */
+	byte = inw(smbus_io_base + SMBHSTDAT) & 0xff;
+
+	if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+		return SMBUS_ERROR;
+	}
+	return byte;
+}
+
+static int do_smbus_write_byte(unsigned smbus_io_base, unsigned device, unsigned address, unsigned char val)
+{
+	unsigned global_status_register;
+
+	if (smbus_wait_until_ready(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_READY_TIMEOUT;
+	}
+
+	/* setup transaction */
+	/* disable interrupts */
+	outw(inw(smbus_io_base + SMBGCTL) & ~((1<<10)|(1<<9)|(1<<8)|(1<<4)), smbus_io_base + SMBGCTL);
+	/* set the device I'm talking too */
+	outw(((device & 0x7f) << 1) | 0, smbus_io_base + SMBHSTADDR);
+	outb(address & 0xFF, smbus_io_base + SMBHSTCMD);
+	/* set up for a byte data write */ /* FIXME */
+	outw((inw(smbus_io_base + SMBGCTL) & ~7) | (0x2), smbus_io_base + SMBGCTL);
+	/* clear any lingering errors, so the transaction will run */
+	/* Do I need to write the bits to a 1 to clear an error? */
+	outw(inw(smbus_io_base + SMBGSTATUS), smbus_io_base + SMBGSTATUS);
+
+	/* write the data word...*/
+	outw(val, smbus_io_base + SMBHSTDAT);
+
+	/* start the command */
+	outw((inw(smbus_io_base + SMBGCTL) | (1 << 3)), smbus_io_base + SMBGCTL);
+
+	/* poll for transaction completion */
+	if (smbus_wait_until_done(smbus_io_base) < 0) {
+		return SMBUS_WAIT_UNTIL_DONE_TIMEOUT;
+	}
+	global_status_register = inw(smbus_io_base + SMBGSTATUS);
+
+	if ((global_status_register & SMBUS_STATUS_MASK) != (1 << 4)) {
+		return SMBUS_ERROR;
+	}
+	return 0;
+}
+