summaryrefslogtreecommitdiff
path: root/src/southbridge/amd/agesa
diff options
context:
space:
mode:
authorIdwer Vollering <vidwer@gmail.com>2014-01-06 21:57:56 +0000
committerRudolf Marek <r.marek@assembler.cz>2014-01-15 22:27:21 +0100
commitc18e52122d6080ea8378c54b759089286736c478 (patch)
tree358272840301af1a847c0ab5ecf832100d139a58 /src/southbridge/amd/agesa
parentbe8d23a3b5f07886edd0d263b75628b75533e6d5 (diff)
AMD Hudson: show POST codes on a PCI device
Show POST codes on a PCI device: implement hudson_pci_port80(). Remove the comments that use pci_locate_device(): using the code found in the comment seems to break booting. This shares much code with sb600/sb700/sb800, however the deduplication work needs to be discusses somewhere else than in this review board. Tested on an Asus F2A85-M. The contribution is (C) by Rudolf Marek. Change-Id: I54fb1dcb0614452c775ed70d867ab44ff263a61a Author: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Idwer Vollering <vidwer@gmail.com> Reviewed-on: http://review.coreboot.org/4559 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
Diffstat (limited to 'src/southbridge/amd/agesa')
-rw-r--r--src/southbridge/amd/agesa/hudson/early_setup.c49
1 files changed, 47 insertions, 2 deletions
diff --git a/src/southbridge/amd/agesa/hudson/early_setup.c b/src/southbridge/amd/agesa/hudson/early_setup.c
index 96861c99ca..a1295121ce 100644
--- a/src/southbridge/amd/agesa/hudson/early_setup.c
+++ b/src/southbridge/amd/agesa/hudson/early_setup.c
@@ -29,6 +29,51 @@
#include <cbmem.h>
#include "hudson.h"
+void hudson_pci_port80(void)
+{
+ u8 byte;
+ device_t dev;
+
+ /* P2P Bridge */
+ dev = PCI_DEV(0, 0x14, 4);
+
+ /* Chip Control: Enable subtractive decoding */
+ byte = pci_read_config8(dev, 0x40);
+ byte |= 1 << 5;
+ pci_write_config8(dev, 0x40, byte);
+
+ /* Misc Control: Enable subtractive decoding if 0x40 bit 5 is set */
+ byte = pci_read_config8(dev, 0x4B);
+ byte |= 1 << 7;
+ pci_write_config8(dev, 0x4B, byte);
+
+ /* The same IO Base and IO Limit here is meaningful because we set the
+ * bridge to be subtractive. During early setup stage, we have to make
+ * sure that data can go through port 0x80.
+ */
+ /* IO Base: 0xf000 */
+ byte = pci_read_config8(dev, 0x1C);
+ byte |= 0xF << 4;
+ pci_write_config8(dev, 0x1C, byte);
+
+ /* IO Limit: 0xf000 */
+ byte = pci_read_config8(dev, 0x1D);
+ byte |= 0xF << 4;
+ pci_write_config8(dev, 0x1D, byte);
+
+ /* PCI Command: Enable IO response */
+ byte = pci_read_config8(dev, 0x04);
+ byte |= 1 << 0;
+ pci_write_config8(dev, 0x04, byte);
+
+ /* LPC controller */
+ dev = PCI_DEV(0, 0x14, 3);
+
+ byte = pci_read_config8(dev, 0x4A);
+ byte &= ~(1 << 5); /* disable lpc port 80 */
+ pci_write_config8(dev, 0x4A, byte);
+}
+
void hudson_lpc_port80(void)
{
u8 byte;
@@ -42,9 +87,9 @@ void hudson_lpc_port80(void)
outb(byte, 0xCD7);
/* Enable port 80 LPC decode in pci function 3 configuration space. */
- dev = PCI_DEV(0, 0x14, 3);//pci_locate_device(PCI_ID(0x1002, 0x439D), 0);
+ dev = PCI_DEV(0, 0x14, 3);
byte = pci_read_config8(dev, 0x4a);
- byte |= 1 << 5; /* enable port 80 */
+ byte |= 1 << 5; /* enable port 80 */
pci_write_config8(dev, 0x4a, byte);
}