summaryrefslogtreecommitdiff
path: root/src/soc
diff options
context:
space:
mode:
authorWerner Zeh <werner.zeh@siemens.com>2018-11-14 10:37:21 +0100
committerPatrick Georgi <pgeorgi@google.com>2018-11-16 09:47:00 +0000
commit73bbcee9327a25da8117a4caf864f8e3162a55c8 (patch)
tree042f307548479150925e341b2d863a081ba94948 /src/soc
parenta0f29312b459235b60f41160d8a776a56d4ca3de (diff)
fsp_broadwell_de: Switch to common SPI controller driver
The common SPI controller driver in src/southbridge/intel/common does match the SPI controller included in the PCH of Broadwell-DE SoC. Switch to the usage of this driver and delete the dedicated one for the FSP based Broadwell-DE implementation. TEST: Boot mc_bdx1 with SPI driver active in romstage Change-Id: I4fe8057ea1981e350659a5caa9912fb758110115 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/29633 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Diffstat (limited to 'src/soc')
-rw-r--r--src/soc/intel/fsp_broadwell_de/Kconfig3
-rw-r--r--src/soc/intel/fsp_broadwell_de/Makefile.inc3
-rw-r--r--src/soc/intel/fsp_broadwell_de/spi.c626
3 files changed, 2 insertions, 630 deletions
diff --git a/src/soc/intel/fsp_broadwell_de/Kconfig b/src/soc/intel/fsp_broadwell_de/Kconfig
index ec010b3882..7046ff04d4 100644
--- a/src/soc/intel/fsp_broadwell_de/Kconfig
+++ b/src/soc/intel/fsp_broadwell_de/Kconfig
@@ -12,12 +12,13 @@ config CPU_SPECIFIC_OPTIONS
select ARCH_VERSTAGE_X86_32
select ARCH_ROMSTAGE_X86_32
select ARCH_RAMSTAGE_X86_32
+ select SOUTHBRIDGE_INTEL_COMMON
+ select SOUTHBRIDGE_INTEL_COMMON_SPI
select SOUTHBRIDGE_INTEL_COMMON_RESET
select NO_RELOCATABLE_RAMSTAGE
select PARALLEL_MP
select SMP
select IOAPIC
- select SPI_FLASH
select UDELAY_TSC
select SUPPORT_CPU_UCODE_IN_CBFS
# Microcode header files are delivered in FSP package
diff --git a/src/soc/intel/fsp_broadwell_de/Makefile.inc b/src/soc/intel/fsp_broadwell_de/Makefile.inc
index 544819088d..f88cbba602 100644
--- a/src/soc/intel/fsp_broadwell_de/Makefile.inc
+++ b/src/soc/intel/fsp_broadwell_de/Makefile.inc
@@ -12,9 +12,6 @@ subdirs-y += ../../../lib/fsp
subdirs-y += fsp
romstage-y += gpio.c
-romstage-y += spi.c
-
-ramstage-y += spi.c
ramstage-y += cpu.c
ramstage-y += chip.c
ramstage-y += northcluster.c
diff --git a/src/soc/intel/fsp_broadwell_de/spi.c b/src/soc/intel/fsp_broadwell_de/spi.c
deleted file mode 100644
index a778aa927a..0000000000
--- a/src/soc/intel/fsp_broadwell_de/spi.c
+++ /dev/null
@@ -1,626 +0,0 @@
-/*
- * Copyright (c) 2013 Google Inc.
- * Copyright (C) 2015-2016 Intel Corp.
- * Copyright (C) 2016 Siemens AG
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-/* This file is derived from the flashrom project. */
-#include <stdint.h>
-#include <stdlib.h>
-#include <string.h>
-#include <delay.h>
-#include <commonlib/helpers.h>
-#include <arch/io.h>
-#include <console/console.h>
-#include <device/pci_ids.h>
-#include <spi_flash.h>
-#include <spi-generic.h>
-#include <arch/early_variables.h>
-
-#ifdef __SMM__
-#define pci_read_config_byte(dev, reg, targ)\
- *(targ) = pci_read_config8(dev, reg)
-#define pci_read_config_word(dev, reg, targ)\
- *(targ) = pci_read_config16(dev, reg)
-#define pci_read_config_dword(dev, reg, targ)\
- *(targ) = pci_read_config32(dev, reg)
-#define pci_write_config_byte(dev, reg, val)\
- pci_write_config8(dev, reg, val)
-#define pci_write_config_word(dev, reg, val)\
- pci_write_config16(dev, reg, val)
-#define pci_write_config_dword(dev, reg, val)\
- pci_write_config32(dev, reg, val)
-#else /* !__SMM__ */
-#include <device/device.h>
-#include <device/pci.h>
-#define pci_read_config_byte(dev, reg, targ)\
- *(targ) = pci_read_config8(dev, reg)
-#define pci_read_config_word(dev, reg, targ)\
- *(targ) = pci_read_config16(dev, reg)
-#define pci_read_config_dword(dev, reg, targ)\
- *(targ) = pci_read_config32(dev, reg)
-#define pci_write_config_byte(dev, reg, val)\
- pci_write_config8(dev, reg, val)
-#define pci_write_config_word(dev, reg, val)\
- pci_write_config16(dev, reg, val)
-#define pci_write_config_dword(dev, reg, val)\
- pci_write_config32(dev, reg, val)
-#endif /* !__SMM__ */
-
-typedef struct spi_slave ich_spi_slave;
-
-static int ichspi_lock CAR_GLOBAL = 0;
-
-typedef struct ich9_spi_regs {
- uint32_t bfpr;
- uint16_t hsfs;
- uint16_t hsfc;
- uint32_t faddr;
- uint32_t _reserved0;
- uint32_t fdata[16];
- uint32_t frap;
- uint32_t freg[5];
- uint32_t _reserved1[3];
- uint32_t pr[5];
- uint32_t _reserved2[2];
- uint8_t ssfs;
- uint8_t ssfc[3];
- uint16_t preop;
- uint16_t optype;
- uint8_t opmenu[8];
- uint32_t bbar;
- uint8_t _reserved3[12];
- uint32_t fdoc;
- uint32_t fdod;
- uint8_t _reserved4[8];
- uint32_t afc;
- uint32_t lvscc;
- uint32_t uvscc;
- uint8_t _reserved5[4];
- uint32_t fpb;
- uint8_t _reserved6[28];
- uint32_t srdl;
- uint32_t srdc;
- uint32_t srd;
-} __packed ich9_spi_regs;
-
-typedef struct ich_spi_controller {
- int locked;
-
- uint8_t *opmenu;
- int menubytes;
- uint16_t *preop;
- uint16_t *optype;
- uint32_t *addr;
- uint8_t *data;
- unsigned databytes;
- uint8_t *status;
- uint16_t *control;
- uint32_t *bbar;
-} ich_spi_controller;
-
-static ich_spi_controller cntlr CAR_GLOBAL;
-
-enum {
- SPIS_SCIP = 0x0001,
- SPIS_GRANT = 0x0002,
- SPIS_CDS = 0x0004,
- SPIS_FCERR = 0x0008,
- SSFS_AEL = 0x0010,
- SPIS_LOCK = 0x8000,
- SPIS_RESERVED_MASK = 0x7ff0,
- SSFS_RESERVED_MASK = 0x7fe2
-};
-
-enum {
- SPIC_SCGO = 0x000002,
- SPIC_ACS = 0x000004,
- SPIC_SPOP = 0x000008,
- SPIC_DBC = 0x003f00,
- SPIC_DS = 0x004000,
- SPIC_SME = 0x008000,
- SSFC_SCF_MASK = 0x070000,
- SSFC_RESERVED = 0xf80000
-};
-
-enum {
- HSFS_FDONE = 0x0001,
- HSFS_FCERR = 0x0002,
- HSFS_AEL = 0x0004,
- HSFS_BERASE_MASK = 0x0018,
- HSFS_BERASE_SHIFT = 3,
- HSFS_SCIP = 0x0020,
- HSFS_FDOPSS = 0x2000,
- HSFS_FDV = 0x4000,
- HSFS_FLOCKDN = 0x8000
-};
-
-enum {
- HSFC_FGO = 0x0001,
- HSFC_FCYCLE_MASK = 0x0006,
- HSFC_FCYCLE_SHIFT = 1,
- HSFC_FDBC_MASK = 0x3f00,
- HSFC_FDBC_SHIFT = 8,
- HSFC_FSMIE = 0x8000
-};
-
-enum {
- SPI_OPCODE_TYPE_READ_NO_ADDRESS = 0,
- SPI_OPCODE_TYPE_WRITE_NO_ADDRESS = 1,
- SPI_OPCODE_TYPE_READ_WITH_ADDRESS = 2,
- SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS = 3
-};
-
-#define SPI_OFFSET_MASK 0x3ff
-
-static uint8_t readb_(const void *addr)
-{
- uint8_t v = read8(addr);
- if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: read %2.2x from %4.4x\n",
- v, ((uint32_t) addr) & SPI_OFFSET_MASK);
- }
- return v;
-}
-
-static uint16_t readw_(const void *addr)
-{
- uint16_t v = read16(addr);
- if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: read %4.4x from %4.4x\n",
- v, ((uint32_t) addr) & SPI_OFFSET_MASK);
- }
- return v;
-}
-
-static uint32_t readl_(const void *addr)
-{
- uint32_t v = read32(addr);
- if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: read %8.8x from %4.4x\n",
- v, ((uint32_t) addr) & SPI_OFFSET_MASK);
- }
- return v;
-}
-
-static void writeb_(uint8_t b, void *addr)
-{
- write8(addr, b);
- if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: wrote %2.2x to %4.4x\n",
- b, ((uint32_t) addr) & SPI_OFFSET_MASK);
- }
-}
-
-static void writew_(uint16_t b, void *addr)
-{
- write16(addr, b);
- if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: wrote %4.4x to %4.4x\n",
- b, ((uint32_t) addr) & SPI_OFFSET_MASK);
- }
-}
-
-static void writel_(uint32_t b, void *addr)
-{
- write32(addr, b);
- if (IS_ENABLED(CONFIG_DEBUG_SPI_FLASH)) {
- printk(BIOS_DEBUG, "SPI: wrote %8.8x to %4.4x\n",
- b, ((uint32_t) addr) & SPI_OFFSET_MASK);
- }
-}
-
-static void write_reg(const void *value, void *dest, uint32_t size)
-{
- const uint8_t *bvalue = value;
- uint8_t *bdest = dest;
-
- while (size >= 4) {
- writel_(*(const uint32_t *)bvalue, bdest);
- bdest += 4; bvalue += 4; size -= 4;
- }
- while (size) {
- writeb_(*bvalue, bdest);
- bdest++; bvalue++; size--;
- }
-}
-
-static void read_reg(const void *src, void *value, uint32_t size)
-{
- const uint8_t *bsrc = src;
- uint8_t *bvalue = value;
-
- while (size >= 4) {
- *(uint32_t *)bvalue = readl_(bsrc);
- bsrc += 4; bvalue += 4; size -= 4;
- }
- while (size) {
- *bvalue = readb_(bsrc);
- bsrc++; bvalue++; size--;
- }
-}
-
-static void ich_set_bbar(uint32_t minaddr)
-{
- const uint32_t bbar_mask = 0x00ffff00;
- uint32_t ichspi_bbar;
-
- minaddr &= bbar_mask;
- ichspi_bbar = readl_(cntlr.bbar) & ~bbar_mask;
- ichspi_bbar |= minaddr;
- writel_(ichspi_bbar, cntlr.bbar);
-}
-
-void spi_init(void)
-{
- uint8_t *rcrb; /* Root Complex Register Block */
- uint32_t rcba; /* Root Complex Base Address */
- uint8_t bios_cntl;
- ich9_spi_regs *ich9_spi;
-
-#if defined(__SIMPLE_DEVICE__)
- pci_devfn_t dev = PCI_DEV(0, 31, 0);
-#else
- struct device *dev;
- dev = dev_find_slot(0, PCI_DEVFN(31, 0));
-#endif
-
- pci_read_config_dword(dev, 0xf0, &rcba);
- /* Bits 31-14 are the base address, 13-1 are reserved, 0 is enable. */
- rcrb = (uint8_t *)(rcba & 0xffffc000);
- ich9_spi = (ich9_spi_regs *)(rcrb + 0x3800);
- ichspi_lock = readw_(&ich9_spi->hsfs) & HSFS_FLOCKDN;
- cntlr.opmenu = ich9_spi->opmenu;
- cntlr.menubytes = sizeof(ich9_spi->opmenu);
- cntlr.optype = &ich9_spi->optype;
- cntlr.addr = &ich9_spi->faddr;
- cntlr.data = (uint8_t *)ich9_spi->fdata;
- cntlr.databytes = sizeof(ich9_spi->fdata);
- cntlr.status = &ich9_spi->ssfs;
- cntlr.control = (uint16_t *)ich9_spi->ssfc;
- cntlr.bbar = &ich9_spi->bbar;
- cntlr.preop = &ich9_spi->preop;
- ich_set_bbar(0);
-
- /* Disable the BIOS write protect so write commands are allowed. */
- pci_read_config_byte(dev, 0xdc, &bios_cntl);
- bios_cntl &= ~(1 << 5);
- pci_write_config_byte(dev, 0xdc, bios_cntl | 0x1);
-}
-
-typedef struct spi_transaction {
- const uint8_t *out;
- uint32_t bytesout;
- uint8_t *in;
- uint32_t bytesin;
- uint8_t type;
- uint8_t opcode;
- uint32_t offset;
-} spi_transaction;
-
-static inline void spi_use_out(spi_transaction *trans, unsigned bytes)
-{
- trans->out += bytes;
- trans->bytesout -= bytes;
-}
-
-static inline void spi_use_in(spi_transaction *trans, unsigned bytes)
-{
- trans->in += bytes;
- trans->bytesin -= bytes;
-}
-
-static void spi_setup_type(spi_transaction *trans)
-{
- trans->type = 0xFF;
-
- /* Try to guess spi type from read/write sizes. */
- if (trans->bytesin == 0) {
- if (trans->bytesout > 4)
- /*
- * If bytesin = 0 and bytesout > 4, we presume this is
- * a write data operation, which is accompanied by an
- * address.
- */
- trans->type = SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS;
- else
- trans->type = SPI_OPCODE_TYPE_WRITE_NO_ADDRESS;
- return;
- }
-
- if (trans->bytesout == 1) { /* and bytesin is > 0 */
- trans->type = SPI_OPCODE_TYPE_READ_NO_ADDRESS;
- return;
- }
-
- if (trans->bytesout == 4) { /* and bytesin is > 0 */
- trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
- }
-
- /* Fast read command is called with 5 bytes instead of 4 */
- if (trans->out[0] == SPI_OPCODE_FAST_READ && trans->bytesout == 5) {
- trans->type = SPI_OPCODE_TYPE_READ_WITH_ADDRESS;
- --trans->bytesout;
- }
-}
-
-static int spi_setup_opcode(spi_transaction *trans)
-{
- uint16_t optypes;
- uint8_t opmenu[cntlr.menubytes];
-
- trans->opcode = trans->out[0];
- spi_use_out(trans, 1);
- if (!ichspi_lock) {
- /* The lock is off, so just use index 0. */
- writeb_(trans->opcode, cntlr.opmenu);
- optypes = readw_(cntlr.optype);
- optypes = (optypes & 0xfffc) | (trans->type & 0x3);
- writew_(optypes, cntlr.optype);
- return 0;
- } else {
- /* The lock is on. See if what we need is on the menu. */
- uint8_t optype;
- uint16_t opcode_index;
-
- /* Write Enable is handled as atomic prefix */
- if (trans->opcode == SPI_OPCODE_WREN)
- return 0;
-
- read_reg(cntlr.opmenu, opmenu, sizeof(opmenu));
- for (opcode_index = 0; opcode_index < cntlr.menubytes;
- opcode_index++) {
- if (opmenu[opcode_index] == trans->opcode)
- break;
- }
-
- if (opcode_index == cntlr.menubytes) {
- printk(BIOS_DEBUG, "ICH SPI: Opcode %x not found\n",
- trans->opcode);
- return -1;
- }
-
- optypes = readw_(cntlr.optype);
- optype = (optypes >> (opcode_index * 2)) & 0x3;
- if (trans->type == SPI_OPCODE_TYPE_WRITE_NO_ADDRESS &&
- optype == SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS &&
- trans->bytesout >= 3) {
- /* We guessed wrong earlier. Fix it up. */
- trans->type = optype;
- }
- if (optype != trans->type) {
- printk(BIOS_DEBUG, "ICH SPI: Transaction doesn't fit type %d\n",
- optype);
- return -1;
- }
- return opcode_index;
- }
-}
-
-static int spi_setup_offset(spi_transaction *trans)
-{
- /* Separate the SPI address and data. */
- switch (trans->type) {
- case SPI_OPCODE_TYPE_READ_NO_ADDRESS:
- case SPI_OPCODE_TYPE_WRITE_NO_ADDRESS:
- return 0;
- case SPI_OPCODE_TYPE_READ_WITH_ADDRESS:
- case SPI_OPCODE_TYPE_WRITE_WITH_ADDRESS:
- trans->offset = ((uint32_t)trans->out[0] << 16) |
- ((uint32_t)trans->out[1] << 8) |
- ((uint32_t)trans->out[2] << 0);
- spi_use_out(trans, 3);
- return 1;
- default:
- printk(BIOS_DEBUG, "Unrecognized SPI transaction type %#x\n", trans->type);
- return -1;
- }
-}
-
-/*
- * Wait for up to 60ms til status register bit(s) turn 1 (in case wait_til_set
- * below is True) or 0. In case the wait was for the bit(s) to set - write
- * those bits back, which would cause resetting them.
- *
- * Return the last read status value on success or -1 on failure.
- */
-static int ich_status_poll(uint16_t bitmask, int wait_til_set)
-{
- int timeout = 40000; /* This will result in 400 ms */
- uint16_t status = 0;
-
- while (timeout--) {
- status = readw_(cntlr.status);
- if (wait_til_set ^ ((status & bitmask) == 0)) {
- if (wait_til_set)
- writew_((status & bitmask), cntlr.status);
- return status;
- }
- udelay(10);
- }
-
- printk(BIOS_DEBUG, "ICH SPI: SCIP timeout, read %x, expected %x\n",
- status, bitmask);
- return -1;
-}
-
-static int spi_ctrlr_xfer(const struct spi_slave *slave, const void *dout,
- size_t bytesout, void *din, size_t bytesin)
-{
- uint16_t control;
- int16_t opcode_index;
- int with_address;
- int status;
-
- spi_transaction trans = {
- dout, bytesout,
- din, bytesin,
- 0xff, 0xff, 0
- };
-
- /* There has to always at least be an opcode. */
- if (!bytesout || !dout) {
- printk(BIOS_DEBUG, "ICH SPI: No opcode for transfer\n");
- return -1;
- }
- /* Make sure if we read something we have a place to put it. */
- if (bytesin != 0 && !din) {
- printk(BIOS_DEBUG, "ICH SPI: Read but no target buffer\n");
- return -1;
- }
-
- if (ich_status_poll(SPIS_SCIP, 0) == -1)
- return -1;
-
- writew_(SPIS_CDS | SPIS_FCERR, cntlr.status);
-
- spi_setup_type(&trans);
- opcode_index = spi_setup_opcode(&trans);
- if (opcode_index < 0)
- return -1;
- with_address = spi_setup_offset(&trans);
- if (with_address < 0)
- return -1;
-
- if (!ichspi_lock && trans.opcode == SPI_OPCODE_WREN) {
- /*
- * Treat Write Enable as Atomic Pre-Op if possible
- * in order to prevent the Management Engine from
- * issuing a transaction between WREN and DATA.
- */
- writew_(trans.opcode, cntlr.preop);
- return 0;
- }
-
- /* Preset control fields */
- control = SPIC_SCGO | ((opcode_index & 0x07) << 4);
-
- /* Issue atomic preop cycle if needed */
- if (readw_(cntlr.preop))
- control |= SPIC_ACS;
-
- if (!trans.bytesout && !trans.bytesin) {
- /* SPI addresses are 24 bit only */
- if (with_address)
- writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
-
- /*
- * This is a 'no data' command (like Write Enable), its
- * bitesout size was 1, decremented to zero while executing
- * spi_setup_opcode() above. Tell the chip to send the
- * command.
- */
- writew_(control, cntlr.control);
-
- /* wait for the result */
- status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
- if (status == -1)
- return -1;
-
- if (status & SPIS_FCERR) {
- printk(BIOS_DEBUG, "ICH SPI: Command transaction error\n");
- return -1;
- }
-
- goto spi_xfer_exit;
- }
-
- /*
- * Check if this is a write command attempting to transfer more bytes
- * than the controller can handle. Iterations for writes are not
- * supported here because each SPI write command needs to be preceded
- * and followed by other SPI commands, and this sequence is controlled
- * by the SPI chip driver.
- */
- if (trans.bytesout > cntlr.databytes) {
- printk(BIOS_DEBUG, "ICH SPI: Too much to write. Does your SPI chip driver use"
- " spi_crop_chunk()?\n");
- return -1;
- }
-
- /*
- * Read or write up to databytes bytes at a time until everything has
- * been sent.
- */
- while (trans.bytesout || trans.bytesin) {
- uint32_t data_length;
-
- /* SPI addresses are 24 bit only */
- writel_(trans.offset & 0x00FFFFFF, cntlr.addr);
-
- if (trans.bytesout)
- data_length = min(trans.bytesout, cntlr.databytes);
- else
- data_length = min(trans.bytesin, cntlr.databytes);
-
- /* Program data into FDATA0 to N */
- if (trans.bytesout) {
- write_reg(trans.out, cntlr.data, data_length);
- spi_use_out(&trans, data_length);
- if (with_address)
- trans.offset += data_length;
- }
-
- /* Add proper control fields' values */
- control &= ~((cntlr.databytes - 1) << 8);
- control |= SPIC_DS;
- control |= (data_length - 1) << 8;
-
- /* write it */
- writew_(control, cntlr.control);
-
- /* Wait for Cycle Done Status or Flash Cycle Error. */
- status = ich_status_poll(SPIS_CDS | SPIS_FCERR, 1);
- if (status == -1)
- return -1;
-
- if (status & SPIS_FCERR) {
- printk(BIOS_DEBUG, "ICH SPI: Data transaction error\n");
- return -1;
- }
-
- if (trans.bytesin) {
- read_reg(cntlr.data, trans.in, data_length);
- spi_use_in(&trans, data_length);
- if (with_address)
- trans.offset += data_length;
- }
- }
-
-spi_xfer_exit:
- /* Clear atomic preop now that xfer is done */
- writew_(0, cntlr.preop);
-
- return 0;
-}
-
-static int xfer_vectors(const struct spi_slave *slave,
- struct spi_op vectors[], size_t count)
-{
- return spi_flash_vector_helper(slave, vectors, count, spi_ctrlr_xfer);
-}
-
-static const struct spi_ctrlr spi_ctrlr = {
- .xfer_vector = xfer_vectors,
- .max_xfer_size = member_size(ich9_spi_regs, fdata),
-};
-
-const struct spi_ctrlr_buses spi_ctrlr_bus_map[] = {
- {
- .ctrlr = &spi_ctrlr,
- .bus_start = 0,
- .bus_end = 0,
- },
-};
-
-const size_t spi_ctrlr_bus_map_count = ARRAY_SIZE(spi_ctrlr_bus_map);