soc/intel/broadwell: Re-do SerialIO UART console support

Use the same code from Lynx Point on Broadwell, and adjust as needed.
Also add a config file to ensure the code gets build-tested.

Tested on out-of-tree Compal LA-A992P (Haswell ULT), UART 0 works.

Change-Id: I527024098738700d5fbaf3e27cf4db331a0322bd
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37553
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>

6 files changed, 48 insertions, 109 deletions

diff --git a/src/soc/intel/broadwell/Kconfig b/src/soc/intel/broadwell/Kconfig
index 5cdfb5488f..c77109d552 100644
--- a/src/soc/intel/broadwell/Kconfig
+++ b/src/soc/intel/broadwell/Kconfig
@@ -153,20 +153,16 @@ config RO_REGION_ONLY
 
 endif # HAVE_MRC
 
-config INTEL_PCH_UART_CONSOLE
-	bool "Use Serial IO UART for console"
+config SERIALIO_UART_CONSOLE
+	bool
 	default n
-	select DRIVERS_UART_8250MEM
-
-config INTEL_PCH_UART_CONSOLE_NUMBER
-	hex "Serial IO UART number to use for console"
-	default 0x0
-	depends on INTEL_PCH_UART_CONSOLE
+	select DRIVERS_UART_8250MEM_32
+	help
+	  Selected by mainboards where SerialIO UARTs can be used to retrieve
+	  coreboot logs. Boards also need to set UART_FOR_CONSOLE accordingly.
 
-config TTYS0_BASE
-	hex
-	default 0xd6000000
-	depends on INTEL_PCH_UART_CONSOLE
+config CONSOLE_UART_BASE_ADDRESS
+	default 0xd6000000 if SERIALIO_UART_CONSOLE
 
 config EHCI_BAR
 	hex
diff --git a/src/soc/intel/broadwell/pch/Makefile.inc b/src/soc/intel/broadwell/pch/Makefile.inc
index 414c85c625..1afa92b581 100644
--- a/src/soc/intel/broadwell/pch/Makefile.inc
+++ b/src/soc/intel/broadwell/pch/Makefile.inc
@@ -30,7 +30,6 @@ ramstage-y += serialio.c
 ramstage-y += ../../../../southbridge/intel/lynxpoint/smbus.c
 ramstage-y += smi.c
 smm-y      += smihandler.c
-romstage-$(CONFIG_DRIVERS_UART_8250MEM) += uart.c
 bootblock-y += usb_debug.c
 romstage-y += usb_debug.c
 ramstage-y += usb_debug.c
@@ -38,4 +37,9 @@ ramstage-y += usb_ehci.c
 ramstage-y += usb_xhci.c
 smm-y      += usb_xhci.c
 
+bootblock-$(CONFIG_SERIALIO_UART_CONSOLE) += ../../../../southbridge/intel/lynxpoint/iobp.c
+bootblock-$(CONFIG_SERIALIO_UART_CONSOLE) += ../../../../southbridge/intel/lynxpoint/uart_init.c
+all-$(CONFIG_SERIALIO_UART_CONSOLE) += ../../../../southbridge/intel/lynxpoint/uart.c
+smm-$(CONFIG_SERIALIO_UART_CONSOLE) += ../../../../southbridge/intel/lynxpoint/uart.c
+
 ramstage-srcs += src/mainboard/$(MAINBOARDDIR)/hda_verb.c
diff --git a/src/soc/intel/broadwell/pch/bootblock.c b/src/soc/intel/broadwell/pch/bootblock.c
index d00a43173e..2f76111c5e 100644
--- a/src/soc/intel/broadwell/pch/bootblock.c
+++ b/src/soc/intel/broadwell/pch/bootblock.c
@@ -105,6 +105,9 @@ static void pch_early_lpc(void)
 	RCBA32_OR(FD, PCH_DISABLE_ALWAYS);
 }
 
+/* Defined in Lynx Point code */
+void uart_bootblock_init(void);
+
 void bootblock_early_southbridge_init(void)
 {
 	map_rcba();
@@ -112,4 +115,7 @@ void bootblock_early_southbridge_init(void)
 	enable_port80_on_lpc();
 	set_spi_speed();
 	pch_early_lpc();
+
+	if (CONFIG(SERIALIO_UART_CONSOLE))
+		uart_bootblock_init();
 }
diff --git a/src/soc/intel/broadwell/pch/lpc.c b/src/soc/intel/broadwell/pch/lpc.c
index e32ae36176..4b4aa9f36c 100644
--- a/src/soc/intel/broadwell/pch/lpc.c
+++ b/src/soc/intel/broadwell/pch/lpc.c
@@ -604,11 +604,12 @@ static unsigned long broadwell_write_acpi_tables(const struct device *device,
 						 unsigned long current,
 						 struct acpi_rsdp *rsdp)
 {
-	if (CONFIG(INTEL_PCH_UART_CONSOLE))
+	if (CONFIG(SERIALIO_UART_CONSOLE)) {
 		current = acpi_write_dbg2_pci_uart(rsdp, current,
-			(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 1) ?
+			(CONFIG_UART_FOR_CONSOLE == 1) ?
 				PCH_DEV_UART1 : PCH_DEV_UART0,
-			ACPI_ACCESS_SIZE_BYTE_ACCESS);
+			ACPI_ACCESS_SIZE_DWORD_ACCESS);
+	}
 	return acpi_write_hpet(device, current, rsdp);
 }
 
diff --git a/src/soc/intel/broadwell/pch/serialio.c b/src/soc/intel/broadwell/pch/serialio.c
index fa61b917c5..5035987faf 100644
--- a/src/soc/intel/broadwell/pch/serialio.c
+++ b/src/soc/intel/broadwell/pch/serialio.c
@@ -15,6 +15,7 @@
 #include <soc/serialio.h>
 #include <soc/intel/broadwell/pch/chip.h>
 #include <southbridge/intel/lynxpoint/iobp.h>
+#include <types.h>
 
 /* Set D3Hot Power State in ACPI mode */
 static void serialio_enable_d3hot(struct resource *res)
@@ -24,17 +25,17 @@ static void serialio_enable_d3hot(struct resource *res)
 	write32(res2mmio(res, PCH_PCS, 0), reg32);
 }
 
-static int serialio_uart_is_debug(struct device *dev)
+static bool serialio_uart_is_debug(struct device *dev)
 {
-#if CONFIG(INTEL_PCH_UART_CONSOLE)
-	switch (dev->path.pci.devfn) {
-	case PCH_DEVFN_UART0: /* UART0 */
-		return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 0);
-	case PCH_DEVFN_UART1: /* UART1 */
-		return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 1);
+	if (CONFIG(SERIALIO_UART_CONSOLE)) {
+		switch (dev->path.pci.devfn) {
+		case PCH_DEVFN_UART0:
+			return CONFIG_UART_FOR_CONSOLE == 0;
+		case PCH_DEVFN_UART1:
+			return CONFIG_UART_FOR_CONSOLE == 1;
+		}
 	}
-#endif
-	return 0;
+	return false;
 }
 
 /* Enable clock in PCI mode */
@@ -239,33 +240,33 @@ static void serialio_init(struct device *dev)
 		dev_nvs->bar0[sio_index] = (u32)bar0->base;
 		dev_nvs->bar1[sio_index] = (u32)bar1->base;
 
-		/* Do not enable UART if it is used as debug port */
-		if (!serialio_uart_is_debug(dev))
+		if (!serialio_uart_is_debug(dev)) {
+			/* Do not enable UART if it is used as debug port */
 			dev_nvs->enable[sio_index] = 1;
 
-		/* Put device in D3hot state via BAR1 */
-		if (dev->path.pci.devfn != PCH_DEVFN_SDMA)
-			serialio_enable_d3hot(bar1); /* all but SDMA */
+			/* Put device in D3hot state via BAR1 */
+			if (dev->path.pci.devfn != PCH_DEVFN_SDMA)
+				serialio_enable_d3hot(bar1); /* all but SDMA */
+		}
 	}
 }
 
-static void serialio_set_resources(struct device *dev)
+static void serialio_read_resources(struct device *dev)
 {
-	pci_dev_set_resources(dev);
+	pci_dev_read_resources(dev);
 
-#if CONFIG(INTEL_PCH_UART_CONSOLE)
-	/* Update UART base address if used for debug */
-	if (serialio_uart_is_debug(dev)) {
+	/* Set the configured UART base address for the debug port */
+	if (CONFIG(SERIALIO_UART_CONSOLE) && serialio_uart_is_debug(dev)) {
 		struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
-		if (res)
-			uartmem_setbaseaddr(res->base);
+		res->base = CONFIG_CONSOLE_UART_BASE_ADDRESS;
+		res->size = 0x1000;
+		res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED | IORESOURCE_FIXED;
 	}
-#endif
 }
 
 static struct device_operations device_ops = {
-	.read_resources		= &pci_dev_read_resources,
-	.set_resources		= &serialio_set_resources,
+	.read_resources		= &serialio_read_resources,
+	.set_resources		= &pci_dev_set_resources,
 	.enable_resources	= &pci_dev_enable_resources,
 	.init			= &serialio_init,
 	.ops_pci		= &pci_dev_ops_pci,
diff --git a/src/soc/intel/broadwell/pch/uart.c b/src/soc/intel/broadwell/pch/uart.c
deleted file mode 100644
index 6b0da2d65c..0000000000
--- a/src/soc/intel/broadwell/pch/uart.c
+++ /dev/null
@@ -1,69 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <device/pci_def.h>
-#include <reg_script.h>
-#include <stdint.h>
-#include <uart8250.h>
-#include <soc/iobp.h>
-#include <soc/serialio.h>
-
-const struct reg_script uart_init[] = {
-	/* Set MMIO BAR */
-	REG_PCI_WRITE32(PCI_BASE_ADDRESS_0, CONFIG_TTYS0_BASE),
-	/* Enable Memory access and Bus Master */
-	REG_PCI_OR32(PCI_COMMAND, PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER),
-	/* Initialize LTR */
-	REG_MMIO_RMW32(CONFIG_TTYS0_BASE + SIO_REG_PPR_GEN,
-		      ~SIO_REG_PPR_GEN_LTR_MODE_MASK, 0),
-	REG_MMIO_RMW32(CONFIG_TTYS0_BASE + SIO_REG_PPR_RST,
-		      ~(SIO_REG_PPR_RST_ASSERT), 0),
-	/* Take UART out of reset */
-	REG_MMIO_OR32(CONFIG_TTYS0_BASE + SIO_REG_PPR_RST,
-		     SIO_REG_PPR_RST_ASSERT),
-	/* Set M and N divisor inputs and enable clock */
-	REG_MMIO_WRITE32(CONFIG_TTYS0_BASE + SIO_REG_PPR_CLOCK,
-			SIO_REG_PPR_CLOCK_EN | SIO_REG_PPR_CLOCK_UPDATE |
-			(SIO_REG_PPR_CLOCK_N_DIV << 16) |
-			(SIO_REG_PPR_CLOCK_M_DIV << 1)),
-	REG_SCRIPT_END
-};
-
-void pch_uart_init(void)
-{
-	/* Program IOBP CB000154h[12,9:8,4:0] = 1001100011111b */
-	u32 gpiodf = 0x131f;
-#if defined(__SIMPLE_DEVICE__)
-	pci_devfn_t dev;
-#else
-	struct device *dev;
-#endif
-
-	/* Put UART in byte access mode for 16550 compatibility */
-	switch (CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER) {
-	case 0:
-		dev = PCH_DEV_UART0;
-		gpiodf |= SIO_IOBP_GPIODF_UART0_BYTE_ACCESS;
-		break;
-	case 1:
-		dev = PCH_DEV_UART1;
-		gpiodf |= SIO_IOBP_GPIODF_UART1_BYTE_ACCESS;
-		break;
-	default:
-		return;
-	}
-
-	/* Program IOBP GPIODF */
-	pch_iobp_update(SIO_IOBP_GPIODF, ~gpiodf, gpiodf);
-
-	/* Program IOBP CB000180h[5:0] = 111111b (undefined register) */
-	pch_iobp_update(0xcb000180, ~0x0000003f, 0x0000003f);
-
-	/* Initialize chipset uart interface */
-	reg_script_run_on_dev(dev, uart_init);
-
-	/*
-	 * Perform standard UART initialization
-	 * Divisor 1 is 115200 BAUD
-	 */
-	uart8250_mem_init(CONFIG_TTYS0_BASE, 1);
-}