sc7180: Add QUPv3 FW load & config

UART driver requires firmware loading

Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/25372/78
https://review.coreboot.org/c/coreboot/+/27483/58

Change-Id: I4d91dd10488931247f81a87b0bdcc598f4bceb31
Signed-off-by: Roja Rani Yarubandi <rojay@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35499
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>

7 files changed, 1051 insertions, 0 deletions

diff --git a/src/soc/qualcomm/sc7180/Makefile.inc b/src/soc/qualcomm/sc7180/Makefile.inc
index 5f4dc1d756..554efd8801 100644
--- a/src/soc/qualcomm/sc7180/Makefile.inc
+++ b/src/soc/qualcomm/sc7180/Makefile.inc
@@ -10,6 +10,8 @@ bootblock-y += gpio.c
 bootblock-$(CONFIG_DRIVERS_UART) += uart_bitbang.c
 bootblock-y += clock.c
 bootblock-$(CONFIG_SC7180_QSPI) += qspi.c
+bootblock-y += qupv3_config.c
+bootblock-y += qcom_qup_se.c
 
 ################################################################################
 verstage-y += timer.c
@@ -43,6 +45,8 @@ ramstage-y += clock.c
 ramstage-$(CONFIG_SC7180_QSPI) += qspi.c
 ramstage-y += aop_load_reset.c
 ramstage-y += usb.c
+ramstage-y += qupv3_config.c
+ramstage-y += qcom_qup_se.c
 
 ################################################################################
 
diff --git a/src/soc/qualcomm/sc7180/bootblock.c b/src/soc/qualcomm/sc7180/bootblock.c
index 29348c2a24..9cecb4f4f5 100644
--- a/src/soc/qualcomm/sc7180/bootblock.c
+++ b/src/soc/qualcomm/sc7180/bootblock.c
@@ -16,10 +16,12 @@
 #include <soc/clock.h>
 #include <soc/mmu.h>
 #include <soc/qspi.h>
+#include <soc/qupv3_config.h>
 
 void bootblock_soc_init(void)
 {
 	sc7180_mmu_init();
 	clock_init();
 	quadspi_init(25 * MHz);
+	qupv3_fw_init();
 }
diff --git a/src/soc/qualcomm/sc7180/include/soc/addressmap.h b/src/soc/qualcomm/sc7180/include/soc/addressmap.h
index 5ca34a6380..6ce7b9b185 100644
--- a/src/soc/qualcomm/sc7180/include/soc/addressmap.h
+++ b/src/soc/qualcomm/sc7180/include/soc/addressmap.h
@@ -25,6 +25,27 @@
 #define TLMM_WEST_TILE_BASE		0x03500000
 
 /*
+ * QUP SERIAL ENGINE BASE ADDRESSES
+ */
+/* QUPV3_0 */
+#define QUP_SERIAL0_BASE		0x00880000
+#define QUP_SERIAL1_BASE		0x00884000
+#define QUP_SERIAL2_BASE		0x00888000
+#define QUP_SERIAL3_BASE		0x0088C000
+#define QUP_SERIAL4_BASE		0x00890000
+#define QUP_SERIAL5_BASE		0x00894000
+#define QUP_WRAP0_BASE			0x008C0000
+
+/* QUPV3_1 */
+#define QUP_SERIAL6_BASE		0x00A80000
+#define QUP_SERIAL7_BASE		0x00A84000
+#define QUP_SERIAL8_BASE		0x00A88000
+#define QUP_SERIAL9_BASE		0x00A8C000
+#define QUP_SERIAL10_BASE		0x00A90000
+#define QUP_SERIAL11_BASE		0x00A94000
+#define QUP_WRAP1_BASE			0x00AC0000
+
+/*
  * USB BASE ADDRESSES
  */
 #define QFPROM_BASE			0x00780000
diff --git a/src/soc/qualcomm/sc7180/include/soc/qcom_qup_se.h b/src/soc/qualcomm/sc7180/include/soc/qcom_qup_se.h
new file mode 100644
index 0000000000..051af9c0b0
--- /dev/null
+++ b/src/soc/qualcomm/sc7180/include/soc/qcom_qup_se.h
@@ -0,0 +1,467 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (c) 2018-2019 Qualcomm Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __SOC_QCOM_QUP_SE_H__
+#define __SOC_QCOM_QUP_SE_H__
+
+#include <console/console.h>
+#include <device/mmio.h>
+#include <gpio.h>
+#include <soc/addressmap.h>
+#include <stdint.h>
+#include <timer.h>
+
+#define GENMASK(h, l)	(BIT(h + 1) - BIT(l))
+
+/* GENI_OUTPUT_CTRL fields */
+#define DEFAULT_IO_OUTPUT_CTRL_MSK	GENMASK(6, 0)
+
+/* GENI_FORCE_DEFAULT_REG fields */
+#define FORCE_DEFAULT	BIT(0)
+
+#define GENI_FW_REVISION_RO_PROTOCOL_MASK	0x0000FF00
+#define GENI_FW_REVISION_RO_PROTOCOL_SHIFT	0x00000008
+
+/* GENI_CGC_CTRL fields */
+#define CFG_AHB_CLK_CGC_ON		BIT(0)
+#define CFG_AHB_WR_ACLK_CGC_ON		BIT(1)
+#define DATA_AHB_CLK_CGC_ON		BIT(2)
+#define SCLK_CGC_ON			BIT(3)
+#define TX_CLK_CGC_ON			BIT(4)
+#define RX_CLK_CGC_ON			BIT(5)
+#define EXT_CLK_CGC_ON			BIT(6)
+#define PROG_RAM_HCLK_OFF		BIT(8)
+#define PROG_RAM_SCLK_OFF		BIT(9)
+#define DEFAULT_CGC_EN		(CFG_AHB_CLK_CGC_ON | CFG_AHB_WR_ACLK_CGC_ON \
+			| DATA_AHB_CLK_CGC_ON | SCLK_CGC_ON \
+			| TX_CLK_CGC_ON | RX_CLK_CGC_ON | EXT_CLK_CGC_ON)
+
+/* GENI_SER_M_CLK_CFG/GENI_SER_S_CLK_CFG */
+#define SER_CLK_EN			BIT(0)
+#define CLK_DIV_SHFT			4
+#define CLK_DIV_MSK			(0xFFF << CLK_DIV_SHFT)
+
+/* FIFO_IF_DISABLE_RO fields */
+#define FIFO_IF_DISABLE			BIT(0)
+
+/* FW_REVISION_RO fields */
+#define FW_REV_PROTOCOL_MSK	GENMASK(15, 8)
+#define FW_REV_PROTOCOL_SHFT	8
+#define FW_REV_VERSION_SHFT		0
+
+/* GENI_CLK_SEL fields */
+#define CLK_SEL_MSK		GENMASK(2, 0)
+
+/* SE_GENI_DMA_MODE_EN */
+#define GENI_DMA_MODE_EN	BIT(0)
+
+/* GENI_M_CMD0 fields */
+#define M_OPCODE_MSK		GENMASK(31, 27)
+#define M_OPCODE_SHFT		27
+#define M_PARAMS_MSK		GENMASK(26, 0)
+
+/* GENI_M_CMD_CTRL_REG */
+#define M_GENI_CMD_CANCEL	BIT(2)
+#define M_GENI_CMD_ABORT	BIT(1)
+#define M_GENI_DISABLE		BIT(0)
+
+/* GENI_S_CMD0 fields */
+#define S_OPCODE_MSK		GENMASK(31, 27)
+#define S_OPCODE_SHFT		27
+#define S_PARAMS_MSK		GENMASK(26, 0)
+
+/* GENI_S_CMD_CTRL_REG */
+#define S_GENI_CMD_CANCEL	BIT(2)
+#define S_GENI_CMD_ABORT	BIT(1)
+#define S_GENI_DISABLE		BIT(0)
+
+/* GENI_M_IRQ_EN fields */
+#define M_CMD_DONE_EN		BIT(0)
+#define M_CMD_OVERRUN_EN	BIT(1)
+#define M_ILLEGAL_CMD_EN	BIT(2)
+#define M_CMD_FAILURE_EN	BIT(3)
+#define M_CMD_CANCEL_EN		BIT(4)
+#define M_CMD_ABORT_EN		BIT(5)
+#define M_TIMESTAMP_EN		BIT(6)
+#define M_RX_IRQ_EN		BIT(7)
+#define M_GP_SYNC_IRQ_0_EN	BIT(8)
+#define M_GP_IRQ_0_EN		BIT(9)
+#define M_GP_IRQ_1_EN		BIT(10)
+#define M_GP_IRQ_2_EN		BIT(11)
+#define M_GP_IRQ_3_EN		BIT(12)
+#define M_GP_IRQ_4_EN		BIT(13)
+#define M_GP_IRQ_5_EN		BIT(14)
+#define M_IO_DATA_DEASSERT_EN	BIT(22)
+#define M_IO_DATA_ASSERT_EN	BIT(23)
+#define M_RX_FIFO_RD_ERR_EN	BIT(24)
+#define M_RX_FIFO_WR_ERR_EN	BIT(25)
+#define M_RX_FIFO_WATERMARK_EN	BIT(26)
+#define M_RX_FIFO_LAST_EN	BIT(27)
+#define M_TX_FIFO_RD_ERR_EN	BIT(28)
+#define M_TX_FIFO_WR_ERR_EN	BIT(29)
+#define M_TX_FIFO_WATERMARK_EN	BIT(30)
+#define M_SEC_IRQ_EN		BIT(31)
+#define M_COMMON_GENI_M_IRQ_EN	(GENMASK(6, 1) | \
+				M_IO_DATA_DEASSERT_EN | \
+				M_IO_DATA_ASSERT_EN | M_RX_FIFO_RD_ERR_EN | \
+				M_RX_FIFO_WR_ERR_EN | M_TX_FIFO_RD_ERR_EN | \
+				M_TX_FIFO_WR_ERR_EN)
+
+/* GENI_S_IRQ_EN fields */
+#define S_CMD_DONE_EN		BIT(0)
+#define S_CMD_OVERRUN_EN	BIT(1)
+#define S_ILLEGAL_CMD_EN	BIT(2)
+#define S_CMD_FAILURE_EN	BIT(3)
+#define S_CMD_CANCEL_EN		BIT(4)
+#define S_CMD_ABORT_EN		BIT(5)
+#define S_GP_SYNC_IRQ_0_EN	BIT(8)
+#define S_GP_IRQ_0_EN		BIT(9)
+#define S_GP_IRQ_1_EN		BIT(10)
+#define S_GP_IRQ_2_EN		BIT(11)
+#define S_GP_IRQ_3_EN		BIT(12)
+#define S_GP_IRQ_4_EN		BIT(13)
+#define S_GP_IRQ_5_EN		BIT(14)
+#define S_IO_DATA_DEASSERT_EN	BIT(22)
+#define S_IO_DATA_ASSERT_EN	BIT(23)
+#define S_RX_FIFO_RD_ERR_EN	BIT(24)
+#define S_RX_FIFO_WR_ERR_EN	BIT(25)
+#define S_RX_FIFO_WATERMARK_EN	BIT(26)
+#define S_RX_FIFO_LAST_EN	BIT(27)
+#define S_COMMON_GENI_S_IRQ_EN	(GENMASK(5, 1) | GENMASK(13, 9) | \
+				 S_RX_FIFO_RD_ERR_EN | S_RX_FIFO_WR_ERR_EN)
+
+/*  GENI_/TX/RX/RX_RFR/_WATERMARK_REG fields */
+#define WATERMARK_MSK		GENMASK(5, 0)
+
+/* GENI_TX_FIFO_STATUS fields */
+#define TX_FIFO_WC		GENMASK(27, 0)
+
+/*  GENI_RX_FIFO_STATUS fields */
+#define RX_LAST			BIT(31)
+#define RX_LAST_BYTE_VALID_MSK	GENMASK(30, 28)
+#define RX_LAST_BYTE_VALID_SHFT	28
+#define RX_FIFO_WC_MSK		GENMASK(24, 0)
+
+/* SE_IRQ_EN fields */
+#define DMA_RX_IRQ_EN		BIT(0)
+#define DMA_TX_IRQ_EN		BIT(1)
+#define GENI_M_IRQ_EN		BIT(2)
+#define GENI_S_IRQ_EN		BIT(3)
+
+/* SE_DMA_GENERAL_CFG */
+#define DMA_RX_CLK_CGC_ON	BIT(0)
+#define DMA_TX_CLK_CGC_ON	BIT(1)
+#define DMA_AHB_SLV_CFG_ON	BIT(2)
+#define AHB_SEC_SLV_CLK_CGC_ON	BIT(3)
+#define DUMMY_RX_NON_BUFFERABLE	BIT(4)
+#define RX_DMA_ZERO_PADDING_EN	BIT(5)
+#define RX_DMA_IRQ_DELAY_MSK	GENMASK(8, 6)
+#define RX_DMA_IRQ_DELAY_SHFT	6
+
+#define DEFAULT_SE_CLK		(19200 * KHz)
+#define GENI_DFS_IF_CFG_DFS_IF_EN_BMSK			BIT(0)
+
+/* FIFO BUFFER PARAMETERS */
+#define BYTES_PER_FIFO_WORD	4
+#define FIFO_WIDTH		32
+#define FIFO_DEPTH		16
+#define BITS_PER_WORD	8
+#define TX_WATERMARK	1
+
+/* PACKING CONFIGURATION VECTOR */
+
+/* start_idx:x: Bit position to move
+ * direction:1: MSB to LSB
+ * len:7: Represents bits-per-word = 8
+ * stop:0: Till it's 1, FIFO bit shift continues
+ */
+
+/* Start_idx:7, direction:1, len:7, stop:0 */
+#define PACK_VECTOR0	0x0FE
+/* Start_idx:15, direction:1, len:7, stop:0 */
+#define PACK_VECTOR1	0x1FE
+/* Start_idx:23, direction:1, len:7, stop:0 */
+#define PACK_VECTOR2	0x2FE
+/* Start_idx:31, direction:1, len:7, stop:1 */
+#define PACK_VECTOR3	0x3FF
+
+enum qup_se {
+	QUPV3_0_SE0,
+	QUPV3_0_SE1,
+	QUPV3_0_SE2,
+	QUPV3_0_SE3,
+	QUPV3_0_SE4,
+	QUPV3_0_SE5,
+	QUPV3_1_SE0,
+	QUPV3_1_SE1,
+	QUPV3_1_SE2,
+	QUPV3_1_SE3,
+	QUPV3_1_SE4,
+	QUPV3_1_SE5,
+	QUPV3_SE_MAX,
+};
+
+enum se_protocol {
+	SE_PROTOCOL_SPI  = 1,
+	SE_PROTOCOL_UART = 2,
+	SE_PROTOCOL_I2C  = 3,
+	SE_PROTOCOL_I3C  = 4,
+	SE_PROTOCOL_MAX  = 5
+};
+
+enum se_mode {
+	NONE,
+	GSI,
+	FIFO,
+	CPU_DMA,
+	MIXED
+};
+
+struct qup_regs {
+	u32 geni_init_cfg_revision;
+	u32 geni_s_init_cfg_revision;
+	u8  _reserved1[0x10 - 0x08];
+	u32 geni_general_cfg;
+	u32 geni_rx_fifo_ctrl;
+	u8  _reserved2[0x20 - 0x18];
+	u32 geni_force_default_reg;
+	u32 geni_output_ctrl;
+	u32 geni_cgc_ctrl;
+	u32 geni_char_cfg;
+	u32 geni_char_data_n;
+	u8  _reserved3[0x40 - 0x34];
+	u32 geni_status;
+	u32 geni_test_bus_ctrl;
+	u32 geni_ser_m_clk_cfg;
+	u32 geni_ser_s_clk_cfg;
+	u32 geni_prog_rom_ctrl_reg;
+	u8  _reserved4[0x60 - 0x54];
+	u32 geni_clk_ctrl_ro;
+	u32 fifo_if_disable_ro;
+	u32 geni_fw_revision_ro;
+	u32 geni_s_fw_revision_ro;
+	u32 geni_fw_multilock_protns_ro;
+	u32 geni_fw_multilock_msa_ro;
+	u32 geni_fw_multilock_sp_ro;
+	u32 geni_clk_sel;
+	u32 geni_dfs_if_cfg;
+	u8 _reserved5[0x100 - 0x084];
+	u32 geni_cfg_reg0;
+	u32 geni_cfg_reg1;
+	u32 geni_cfg_reg2;
+	u32 geni_cfg_reg3;
+	u32 geni_cfg_reg4;
+	u32 geni_cfg_reg5;
+	u32 geni_cfg_reg6;
+	u32 geni_cfg_reg7;
+	u32 geni_cfg_reg8;
+	u32 geni_cfg_reg9;
+	u32 geni_cfg_reg10;
+	u32 geni_cfg_reg11;
+	u32 geni_cfg_reg12;
+	u32 geni_cfg_reg13;
+	u32 geni_cfg_reg14;
+	u32 geni_cfg_reg15;
+	u32 geni_cfg_reg16;
+	u32 geni_cfg_reg17;
+	u32 geni_cfg_reg18;
+	u8  _reserved6[0x200 - 0x14C];
+	u32 geni_cfg_reg64;
+	u32 geni_cfg_reg65;
+	u32 geni_cfg_reg66;
+	u32 geni_cfg_reg67;
+	u32 geni_cfg_reg68;
+	u32 geni_cfg_reg69;
+	u32 geni_cfg_reg70;
+	u32 geni_cfg_reg71;
+	u32 geni_cfg_reg72;
+	u32 spi_cpha;
+	u32 geni_cfg_reg74;
+	u32 proto_loopback_cfg;
+	u32 spi_cpol;
+	u32 i2c_noise_cancellation_ctl;
+	u32 i2c_monitor_ctl;
+	u32 geni_cfg_reg79;
+	u32 geni_cfg_reg80;
+	u32 geni_cfg_reg81;
+	u32 geni_cfg_reg82;
+	u32 spi_demux_output_inv;
+	u32 spi_demux_sel;
+	u32 geni_byte_granularity;
+	u32 geni_dma_mode_en;
+	u32 uart_tx_trans_cfg_reg;
+	u32 geni_tx_packing_cfg0;
+	u32 geni_tx_packing_cfg1;
+	union {
+		u32 uart_tx_word_len;
+		u32 spi_word_len;
+	};
+	union {
+		u32 uart_tx_stop_bit_len;
+		u32 i2c_tx_trans_len;
+		u32 spi_tx_trans_len;
+	};
+	union {
+		u32 uart_tx_trans_len;
+		u32 i2c_rx_trans_len;
+		u32 spi_rx_trans_len;
+	};
+	u32 spi_pre_post_cmd_dly;
+	u32 i2c_scl_counters;
+	u32 geni_cfg_reg95;
+	u32 uart_rx_trans_cfg;
+	u32 geni_rx_packing_cfg0;
+	u32 geni_rx_packing_cfg1;
+	u32 uart_rx_word_len;
+	u32 geni_cfg_reg100;
+	u32 uart_rx_stale_cnt;
+	u32 geni_cfg_reg102;
+	u32 geni_cfg_reg103;
+	u32 geni_cfg_reg104;
+	u32 uart_tx_parity_cfg;
+	u32 uart_rx_parity_cfg;
+	u32 uart_manual_rfr;
+	u32 geni_cfg_reg108;
+	u32 geni_cfg_reg109;
+	u32 geni_cfg_reg110;
+	u8 _reserved7[0x600 - 0x2BC];
+	u32 geni_m_cmd0;
+	u32 geni_m_cmd_ctrl_reg;
+	u8  _reserved8[0x10 - 0x08];
+	u32 geni_m_irq_status;
+	u32 geni_m_irq_enable;
+	u32 geni_m_irq_clear;
+	u32 geni_m_irq_en_set;
+	u32 geni_m_irq_en_clear;
+	u32 geni_m_cmd_err_status;
+	u32 geni_m_fw_err_status;
+	u8  _reserved9[0x30 - 0x2C];
+	u32 geni_s_cmd0;
+	u32 geni_s_cmd_ctrl_reg;
+	u8  _reserved10[0x40 - 0x38];
+	u32 geni_s_irq_status;
+	u32 geni_s_irq_enable;
+	u32 geni_s_irq_clear;
+	u32 geni_s_irq_en_set;
+	u32 geni_s_irq_en_clear;
+	u8  _reserved11[0x700 - 0x654];
+	u32 geni_tx_fifon;
+	u8  _reserved12[0x780 - 0x704];
+	u32 geni_rx_fifon;
+	u8  _reserved13[0x800 - 0x784];
+	u32 geni_tx_fifo_status;
+	u32 geni_rx_fifo_status;
+	u32 geni_tx_fifo_threshold;
+	u32 geni_tx_watermark_reg;
+	u32 geni_rx_watermark_reg;
+	u32 geni_rx_rfr_watermark_reg;
+	u8  _reserved14[0x900 - 0x818];
+	u32 geni_gp_output_reg;
+	u8  _reserved15[0x908 - 0x904];
+	u32 geni_ios;
+	u32 geni_timestamp;
+	u32 geni_m_gp_length;
+	u32 geni_s_gp_length;
+	u8  _reserved16[0x920 - 0x918];
+	u32 geni_hw_irq_en;
+	u32 geni_hw_irq_ignore_on_active;
+	u8  _reserved17[0x930 - 0x928];
+	u32 geni_hw_irq_cmd_param_0;
+	u8  _reserved18[0xA00 - 0x934];
+	u32 geni_i3c_ibi_cfg_tablen;
+	u8  _reserved19[0xA80 - 0xA04];
+	u32 geni_i3c_ibi_status;
+	u32 geni_i3c_ibi_rd_data;
+	u32 geni_i3c_ibi_search_pattern;
+	u32 geni_i3c_ibi_search_data;
+	u32 geni_i3c_sw_ibi_en;
+	u32 geni_i3c_sw_ibi_en_recover;
+	u8 _reserved20[0xC30 - 0xA98];
+	u32 dma_tx_ptr_l;
+	u32 dma_tx_ptr_h;
+	u32 dma_tx_attr;
+	u32 dma_tx_length;
+	u32 dma_tx_irq_stat;
+	u32 dma_tx_irq_clr;
+	u32 dma_tx_irq_en;
+	u32 dma_tx_irq_en_set;
+	u32 dma_tx_irq_en_clr;
+	u32 dma_tx_length_in;
+	u32 dma_tx_fsm_rst;
+	u32 dma_tx_max_burst_size;
+	u8  _reserved21[0xD30 - 0xC60];
+	u32 dma_rx_ptr_l;
+	u32 dma_rx_ptr_h;
+	u32 dma_rx_attr;
+	u32 dma_rx_length;
+	u32 dma_rx_irq_stat;
+	u32 dma_rx_irq_clr;
+	u32 dma_rx_irq_en;
+	u32 dma_rx_irq_en_set;
+	u32 dma_rx_irq_en_clr;
+	u32 dma_rx_length_in;
+	u32 dma_rx_fsm_rst;
+	u32 dma_rx_max_burst_size;
+	u32 dma_rx_flush;
+	u8  _reserved22[0xE14 - 0xD64];
+	u32 se_irq_high_priority;
+	u32 se_gsi_event_en;
+	u32 se_irq_en;
+	u32 dma_if_en_ro;
+	u32 se_hw_param_0;
+	u32 se_hw_param_1;
+	u32 se_hw_param_2;
+	u32 dma_general_cfg;
+	u8  _reserved23[0x40 - 0x34];
+	u32 dma_debug_reg0;
+	u32 dma_test_bus_ctrl;
+	u32 se_top_test_bus_ctrl;
+	u8 _reserved24[0x1000 - 0x0E4C];
+	u32 se_geni_fw_revision;
+	u32 se_s_fw_revision;
+	u8 _reserved25[0x10-0x08];
+	u32 se_geni_cfg_ramn;
+	u8 _reserved26[0x2000 - 0x1014];
+	u32 se_geni_clk_ctrl;
+	u32 se_dma_if_en;
+	u32 se_fifo_if_disable;
+	u32 se_geni_fw_multilock_protns;
+	u32 se_geni_fw_multilock_msa;
+	u32 se_geni_fw_multilock_sp;
+};
+check_member(qup_regs, geni_clk_sel, 0x7C);
+check_member(qup_regs, geni_cfg_reg108, 0x2B0);
+check_member(qup_regs, geni_dma_mode_en, 0x258);
+check_member(qup_regs, geni_i3c_ibi_rd_data, 0xA84);
+check_member(qup_regs, dma_test_bus_ctrl, 0xE44);
+check_member(qup_regs, se_geni_cfg_ramn, 0x1010);
+check_member(qup_regs, se_geni_fw_multilock_sp, 0x2014);
+
+struct qup {
+	struct qup_regs *regs;
+	gpio_t pin[6];
+	u8 func[6];
+};
+
+extern struct qup qup[12];
+
+u32 qup_wait_for_m_irq(unsigned int bus);
+u32 qup_wait_for_s_irq(unsigned int bus);
+void qup_m_cancel_and_abort(unsigned int bus);
+void qup_s_cancel_and_abort(unsigned int bus);
+int qup_handle_transfer(unsigned int bus, const void *dout, void *din,
+	int size);
+
+#endif /* __SOC_QCOM_QUP_SE_H__ */
diff --git a/src/soc/qualcomm/sc7180/include/soc/qupv3_config.h b/src/soc/qualcomm/sc7180/include/soc/qupv3_config.h
new file mode 100644
index 0000000000..b2a89a53c0
--- /dev/null
+++ b/src/soc/qualcomm/sc7180/include/soc/qupv3_config.h
@@ -0,0 +1,80 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019, The Linux Foundation.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _SC7180_QUPV3_CONFIG_H_
+#define _SC7180_QUPV3_CONFIG_H_
+
+#include <assert.h>
+#include <cbfs.h>
+#include <soc/clock.h>
+#include <soc/qcom_qup_se.h>
+
+#define QUPV3_COMMON_CFG_FAST_SWITCH_TO_HIGH_DISABLE_BMSK	0x00000001
+#define QUPV3_SE_AHB_M_CFG_AHB_M_CLK_CGC_ON_BMSK		0x00000001
+
+#define GENI_CGC_CTRL_PROG_RAM_SCLK_OFF_BMSK			0x00000200
+#define GENI_CGC_CTRL_PROG_RAM_HCLK_OFF_BMSK			0x00000100
+
+#define GENI_DMA_MODE_EN_GENI_DMA_MODE_EN_BMSK			0x00000001
+
+#define DMA_TX_IRQ_EN_SET_RESET_DONE_EN_SET_BMSK		0x00000008
+#define DMA_TX_IRQ_EN_SET_SBE_EN_SET_BMSK			0x00000004
+#define DMA_TX_IRQ_EN_SET_DMA_DONE_EN_SET_BMSK			0x00000001
+
+#define DMA_RX_IRQ_EN_SET_FLUSH_DONE_EN_SET_BMSK		0x00000010
+#define DMA_RX_IRQ_EN_SET_RESET_DONE_EN_SET_BMSK		0x00000008
+#define DMA_RX_IRQ_EN_SET_SBE_EN_SET_BMSK			0x00000004
+#define DMA_RX_IRQ_EN_SET_DMA_DONE_EN_SET_BMSK			0x00000001
+
+#define DMA_GENERAL_CFG_AHB_SEC_SLV_CLK_CGC_ON_BMSK		0x00000008
+#define DMA_GENERAL_CFG_DMA_AHB_SLV_CLK_CGC_ON_BMSK		0x00000004
+#define DMA_GENERAL_CFG_DMA_TX_CLK_CGC_ON_BMSK			0x00000002
+#define DMA_GENERAL_CFG_DMA_RX_CLK_CGC_ON_BMSK			0x00000001
+
+#define GENI_CLK_CTRL_SER_CLK_SEL_BMSK				0x00000001
+#define DMA_IF_EN_DMA_IF_EN_BMSK				0x00000001
+#define SE_GSI_EVENT_EN_BMSK					0x0000000f
+#define SE_IRQ_EN_RMSK						0x0000000f
+
+#define SIZE_GENI_FW_RAM					0x00000200
+#define MAX_OFFSET_CFG_REG					0x000001c0
+#define SEFW_MAGIC_HEADER					0x57464553
+
+struct elf_se_hdr {
+	uint32_t magic;		   /* = 'SEFW' */
+	uint32_t version;	   /* Structure version number */
+	uint32_t core_version;	   /* QUPV3_HW_VERSION */
+	uint16_t serial_protocol;  /* Programmed into GENI_FW_REVISION */
+	uint16_t fw_version;	   /* Programmed into GENI_FW_REVISION */
+	uint16_t cfg_version;	   /* Programmed into GENI_INIT_CFG_REVISION */
+	uint16_t fw_size_in_items; /* Number of (uint32_t) GENI_FW_RAM words */
+	uint16_t fw_offset;	   /* Byte offset of GENI_FW_RAM array */
+	uint16_t cfg_size_in_items;/* Number of GENI_FW_CFG index/value pairs */
+	uint16_t cfg_idx_offset;   /* Byte offset of GENI_FW_CFG index array */
+	uint16_t cfg_val_offset;   /* Byte offset of GENI_FW_CFG values array */
+};
+
+struct qupv3_common_reg {
+	u8 reserved_1[0x118];
+	u32 qupv3_se_ahb_m_cfg_reg;
+	u8 reserved_2[0x4];
+	u32 qupv3_common_cfg_reg;
+};
+
+void qupv3_fw_init(void);
+void qupv3_se_fw_load_and_init(unsigned int bus, unsigned int protocol,
+				unsigned int mode);
+
+#endif /* _SC7180_QUPV3_CONFIG_H_ */
diff --git a/src/soc/qualcomm/sc7180/qcom_qup_se.c b/src/soc/qualcomm/sc7180/qcom_qup_se.c
new file mode 100644
index 0000000000..b6540a88cf
--- /dev/null
+++ b/src/soc/qualcomm/sc7180/qcom_qup_se.c
@@ -0,0 +1,258 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (c) 2018-2019 Qualcomm Technologies
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <soc/qcom_qup_se.h>
+
+struct qup qup[12] = {
+	[0] = { .regs = (void *)QUP_SERIAL0_BASE,
+		.pin = { GPIO(34), GPIO(35), GPIO(36), GPIO(37) },
+		.func = { GPIO34_FUNC_QUP0_L0, GPIO35_FUNC_QUP0_L1,
+			GPIO36_FUNC_QUP0_L2, GPIO37_FUNC_QUP0_L3 }
+		},
+	[1] = { .regs = (void *)QUP_SERIAL1_BASE,
+		.pin = { GPIO(0), GPIO(1), GPIO(2), GPIO(3),
+			GPIO(12), GPIO(94) },
+		.func = { GPIO0_FUNC_QUP0_L0, GPIO1_FUNC_QUP0_L1,
+			GPIO2_FUNC_QUP0_L2, GPIO3_FUNC_QUP0_L3,
+			GPIO12_FUNC_QUP0_L4, GPIO94_FUNC_QUP0_L5 }
+		},
+	[2] = { .regs = (void *)QUP_SERIAL2_BASE,
+		.pin = { GPIO(15), GPIO(16) },
+		.func = { GPIO15_FUNC_QUP0_L0, GPIO16_FUNC_QUP0_L1 }
+		},
+	[3] = { .regs = (void *)QUP_SERIAL3_BASE,
+		.pin = { GPIO(38), GPIO(39), GPIO(40), GPIO(41) },
+		.func = { GPIO38_FUNC_QUP0_L0, GPIO39_FUNC_QUP0_L1,
+			GPIO40_FUNC_QUP0_L2, GPIO41_FUNC_QUP0_L3 }
+		},
+	[4] = { .regs = (void *)QUP_SERIAL4_BASE,
+		.pin = { GPIO(115), GPIO(116) },
+		.func = { GPIO115_FUNC_QUP0_L0, GPIO116_FUNC_QUP0_L1 }
+		},
+	[5] = { .regs = (void *)QUP_SERIAL5_BASE,
+		.pin = { GPIO(25), GPIO(26), GPIO(27), GPIO(28) },
+		.func = { GPIO25_FUNC_QUP0_L0, GPIO26_FUNC_QUP0_L1,
+			GPIO27_FUNC_QUP0_L2, GPIO28_FUNC_QUP0_L3 }
+		},
+	[6] = { .regs = (void *)QUP_SERIAL6_BASE,
+		.pin = { GPIO(59), GPIO(60), GPIO(61), GPIO(62),
+			GPIO(68), GPIO(72) },
+		.func = { GPIO59_FUNC_QUP1_L0, GPIO60_FUNC_QUP1_L1,
+			GPIO61_FUNC_QUP1_L2, GPIO62_FUNC_QUP1_L3,
+			GPIO68_FUNC_QUP1_L4, GPIO72_FUNC_QUP1_L5 }
+		},
+	[7] = { .regs = (void *)QUP_SERIAL7_BASE,
+		.pin = { GPIO(6), GPIO(7) },
+		.func = { GPIO6_FUNC_QUP1_L0, GPIO7_FUNC_QUP1_L1 }
+		},
+	[8] = { .regs = (void *)QUP_SERIAL8_BASE,
+		.pin = { GPIO(42), GPIO(43), GPIO(44), GPIO(45) },
+		.func = { GPIO42_FUNC_QUP1_L0, GPIO43_FUNC_QUP1_L1,
+			GPIO44_FUNC_QUP1_L2, GPIO45_FUNC_QUP1_L3 }
+		},
+	[9] = { .regs = (void *)QUP_SERIAL9_BASE,
+		.pin = { GPIO(46), GPIO(47) },
+		.func = { GPIO46_FUNC_QUP1_L0, GPIO47_FUNC_QUP1_L1 }
+		},
+	[10] = { .regs = (void *)QUP_SERIAL10_BASE,
+		.pin = { GPIO(86), GPIO(87), GPIO(88), GPIO(89),
+			GPIO(90), GPIO(91) },
+		.func = { GPIO86_FUNC_QUP1_L0, GPIO87_FUNC_QUP1_L1,
+			GPIO88_FUNC_QUP1_L2, GPIO89_FUNC_QUP1_L3,
+			GPIO90_FUNC_QUP1_L4, GPIO91_FUNC_QUP1_L5 }
+		},
+	[11] = { .regs = (void *)QUP_SERIAL11_BASE,
+		.pin = { GPIO(53), GPIO(54), GPIO(55), GPIO(56) },
+		.func = { GPIO53_FUNC_QUP1_L0, GPIO54_FUNC_QUP1_L1,
+			GPIO55_FUNC_QUP1_L2, GPIO56_FUNC_QUP1_L3 }
+		},
+};
+
+u32 qup_wait_for_m_irq(unsigned int bus)
+{
+	struct stopwatch sw;
+	unsigned int m_irq = 0;
+	struct qup_regs *regs = qup[bus].regs;
+
+	stopwatch_init_usecs_expire(&sw, 25);
+	while (!stopwatch_expired(&sw)) {
+		m_irq = read32(&regs->geni_m_irq_status);
+		if (m_irq)
+			break;
+	}
+	return m_irq;
+}
+
+u32 qup_wait_for_s_irq(unsigned int bus)
+{
+	struct stopwatch sw;
+	unsigned int s_irq = 0;
+	struct qup_regs *regs = qup[bus].regs;
+
+	stopwatch_init_usecs_expire(&sw, 25);
+	while (!stopwatch_expired(&sw)) {
+		s_irq = read32(&regs->geni_s_irq_status);
+		if (s_irq)
+			break;
+	}
+	return s_irq;
+}
+
+static int handle_tx(unsigned int bus, const u8 *dout,
+	unsigned int tx_rem_bytes)
+{
+	int max_bytes = 0;
+	struct qup_regs *regs = qup[bus].regs;
+
+	max_bytes = (FIFO_DEPTH - TX_WATERMARK) * BYTES_PER_FIFO_WORD;
+	max_bytes = MIN(tx_rem_bytes, max_bytes);
+
+	buffer_to_fifo32((void *)dout, max_bytes, &regs->geni_tx_fifon,
+					0, BYTES_PER_FIFO_WORD);
+
+	if (tx_rem_bytes == max_bytes)
+		write32(&regs->geni_tx_watermark_reg, 0);
+	return max_bytes;
+}
+
+static int handle_rx(unsigned int bus, u8 *din, unsigned int rx_rem_bytes)
+{
+	struct qup_regs *regs = qup[bus].regs;
+	u32 rx_fifo_status = read32(&regs->geni_rx_fifo_status);
+	int rx_bytes = 0;
+
+	rx_bytes = (rx_fifo_status & RX_FIFO_WC_MSK) * BYTES_PER_FIFO_WORD;
+	rx_bytes = MIN(rx_rem_bytes, rx_bytes);
+
+	buffer_from_fifo32(din, rx_bytes, &regs->geni_rx_fifon,
+					0, BYTES_PER_FIFO_WORD);
+	return rx_bytes;
+}
+
+void qup_m_cancel_and_abort(unsigned int bus)
+{
+	struct qup_regs *regs = qup[bus].regs;
+	struct stopwatch sw;
+	unsigned int m_irq;
+
+	write32(&regs->geni_tx_watermark_reg, 0);
+	write32(&regs->geni_m_cmd_ctrl_reg, M_GENI_CMD_CANCEL);
+
+	stopwatch_init_msecs_expire(&sw, 100);
+	do {
+		m_irq = qup_wait_for_m_irq(bus);
+		if (m_irq & M_CMD_CANCEL_EN) {
+			write32(&regs->geni_m_irq_clear, m_irq);
+			break;
+		}
+		write32(&regs->geni_m_irq_clear, m_irq);
+	} while (!stopwatch_expired(&sw));
+
+	if (!(m_irq & M_CMD_CANCEL_EN)) {
+		printk(BIOS_INFO, "%s:Cancel failed, Abort the operation\n",
+								__func__);
+
+		write32(&regs->geni_m_cmd_ctrl_reg, M_GENI_CMD_ABORT);
+		stopwatch_init_msecs_expire(&sw, 100);
+		do {
+			m_irq = qup_wait_for_m_irq(bus);
+			if (m_irq & M_CMD_ABORT_EN) {
+				write32(&regs->geni_m_irq_clear, m_irq);
+				break;
+			}
+			write32(&regs->geni_m_irq_clear, m_irq);
+		} while (!stopwatch_expired(&sw));
+
+		if (!(m_irq & M_CMD_ABORT_EN))
+			printk(BIOS_INFO, "%s:Abort failed\n", __func__);
+	}
+}
+
+void qup_s_cancel_and_abort(unsigned int bus)
+{
+	struct qup_regs *regs = qup[bus].regs;
+	struct stopwatch sw;
+	unsigned int s_irq;
+	u32 rx_fifo_status;
+	u8 buf[64]; /* FIFO size */
+
+	write32(&regs->geni_tx_watermark_reg, 0);
+	write32(&regs->geni_s_cmd_ctrl_reg, S_GENI_CMD_CANCEL);
+
+	stopwatch_init_msecs_expire(&sw, 100);
+	do {
+		s_irq = qup_wait_for_s_irq(bus);
+		rx_fifo_status  = read32(&regs->geni_rx_fifo_status);
+		if (rx_fifo_status & RX_LAST)
+			handle_rx(bus, buf, 64); /* Read whatever data available in FIFO */
+		if (s_irq & S_CMD_CANCEL_EN) {
+			write32(&regs->geni_s_irq_clear, s_irq);
+			break;
+		}
+		write32(&regs->geni_s_irq_clear, s_irq);
+	} while (!stopwatch_expired(&sw));
+
+	if (!(s_irq & S_CMD_CANCEL_EN)) {
+		printk(BIOS_INFO, "%s:Cancel failed, Abort the operation\n",
+								__func__);
+
+		write32(&regs->geni_s_cmd_ctrl_reg, S_GENI_CMD_ABORT);
+		stopwatch_init_msecs_expire(&sw, 100);
+		do {
+			s_irq = qup_wait_for_s_irq(bus);
+			if (s_irq & S_CMD_ABORT_EN) {
+				write32(&regs->geni_s_irq_clear, s_irq);
+				break;
+			}
+			write32(&regs->geni_s_irq_clear, s_irq);
+		} while (!stopwatch_expired(&sw));
+
+		if (!(s_irq & S_CMD_ABORT_EN))
+			printk(BIOS_INFO, "%s:Abort failed\n", __func__);
+	}
+}
+
+int qup_handle_transfer(unsigned int bus, const void *dout, void *din, int size)
+{
+	unsigned int m_irq;
+	struct stopwatch sw;
+	unsigned int rx_rem_bytes = din ? size : 0;
+	unsigned int tx_rem_bytes = dout ? size : 0;
+	struct qup_regs *regs = qup[bus].regs;
+
+	stopwatch_init_msecs_expire(&sw, 1000);
+	do {
+		m_irq = qup_wait_for_m_irq(bus);
+		if ((m_irq & M_RX_FIFO_WATERMARK_EN) ||
+					(m_irq & M_RX_FIFO_LAST_EN))
+			rx_rem_bytes -= handle_rx(bus, din + size
+						- rx_rem_bytes, rx_rem_bytes);
+		if (m_irq & M_TX_FIFO_WATERMARK_EN)
+			tx_rem_bytes -= handle_tx(bus, dout + size
+						- tx_rem_bytes, tx_rem_bytes);
+		if (m_irq & M_CMD_DONE_EN) {
+			write32(&regs->geni_m_irq_clear, m_irq);
+			break;
+		}
+		write32(&regs->geni_m_irq_clear, m_irq);
+	} while (!stopwatch_expired(&sw));
+
+	if (!(m_irq & M_CMD_DONE_EN) || tx_rem_bytes || rx_rem_bytes) {
+		printk(BIOS_INFO, "%s:Error: Transfer failed\n", __func__);
+		qup_m_cancel_and_abort(bus);
+		return -1;
+	}
+	return 0;
+}
diff --git a/src/soc/qualcomm/sc7180/qupv3_config.c b/src/soc/qualcomm/sc7180/qupv3_config.c
new file mode 100644
index 0000000000..14df187886
--- /dev/null
+++ b/src/soc/qualcomm/sc7180/qupv3_config.c
@@ -0,0 +1,219 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2020, The Linux Foundation.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <soc/qupv3_config.h>
+
+static struct elf_se_hdr *fw_list[SE_PROTOCOL_MAX];
+
+void qupv3_se_fw_load_and_init(unsigned int bus, unsigned int protocol,
+							unsigned int mode)
+{
+	uint32_t i;
+	uint32_t reg_value;
+	const uint8_t *cfg_idx_arr;
+	const uint32_t *cfg_val_arr;
+	const uint32_t *fw_val_arr;
+	struct elf_se_hdr *hdr;
+	struct qup_regs *regs = qup[bus].regs;
+	static const char * const filename[] = {
+		[SE_PROTOCOL_SPI] = "fallback/spi_fw",
+		[SE_PROTOCOL_UART] = "fallback/uart_fw",
+		[SE_PROTOCOL_I2C] = "fallback/i2c_fw",
+	};
+
+	if (protocol >= SE_PROTOCOL_MAX || !filename[protocol])
+		die("*ERROR*  * INVALID PROTOCOL ***\n");
+
+	if (!fw_list[protocol]) {
+		fw_list[protocol] = cbfs_boot_map_with_leak(filename[protocol],
+					CBFS_TYPE_RAW, NULL);
+		if (!fw_list[protocol])
+			die("*ERROR*  * cbfs_boot_map_with_leak failed ***\n");
+	}
+
+	hdr = fw_list[protocol];
+	assert(hdr->magic == SEFW_MAGIC_HEADER)
+
+	cfg_idx_arr = (const uint8_t *)hdr + hdr->cfg_idx_offset;
+	cfg_val_arr = (const uint32_t *)((uint8_t *)hdr + hdr->cfg_val_offset);
+	fw_val_arr = (const uint32_t *)((uint8_t *)hdr + hdr->fw_offset);
+
+	/* Unlock SE for FW loading */
+	write32(&regs->se_geni_fw_multilock_protns, 0x0);
+	write32(&regs->se_geni_fw_multilock_msa, 0x0);
+
+	/* First, ensure GENI FW is disabled */
+	write32(&regs->geni_output_ctrl, 0x0);
+	clrbits_le32(&regs->geni_dfs_if_cfg, GENI_DFS_IF_CFG_DFS_IF_EN_BMSK);
+	setbits_le32(&regs->geni_cgc_ctrl, GENI_CGC_CTRL_PROG_RAM_SCLK_OFF_BMSK
+			| GENI_CGC_CTRL_PROG_RAM_HCLK_OFF_BMSK);
+	write32(&regs->se_geni_clk_ctrl, 0x0);
+	clrbits_le32(&regs->geni_cgc_ctrl, GENI_CGC_CTRL_PROG_RAM_SCLK_OFF_BMSK
+			| GENI_CGC_CTRL_PROG_RAM_HCLK_OFF_BMSK);
+
+
+	/* HPG section 3.1.7.1 */
+	if (protocol == SE_PROTOCOL_UART) {
+		/* To maintain Div=4 for QcLib, configure clock to 7372800Hz for sc7180 */
+		clock_configure_qup(bus, QUPV3_UART_SRC_HZ);
+	} else {
+		setbits_le32(&regs->geni_dfs_if_cfg,
+				GENI_DFS_IF_CFG_DFS_IF_EN_BMSK);
+		/* configure clock dfsr */
+		clock_configure_dfsr(bus);
+	}
+
+	/* HPG section 3.1.7.2 */
+	/* No Init Required */
+
+	/* HPG section 3.1.7.3 */
+	write32(&regs->dma_general_cfg,
+			DMA_GENERAL_CFG_AHB_SEC_SLV_CLK_CGC_ON_BMSK |
+		    DMA_GENERAL_CFG_DMA_AHB_SLV_CLK_CGC_ON_BMSK |
+		    DMA_GENERAL_CFG_DMA_TX_CLK_CGC_ON_BMSK |
+		    DMA_GENERAL_CFG_DMA_RX_CLK_CGC_ON_BMSK);
+	write32(&regs->geni_cgc_ctrl, DEFAULT_CGC_EN);
+
+	/* HPG section 3.1.7.4 */
+	write32(&regs->geni_init_cfg_revision, hdr->cfg_version);
+	write32(&regs->geni_s_init_cfg_revision, hdr->cfg_version);
+
+	assert(cfg_idx_arr[hdr->cfg_size_in_items - 1] * sizeof(uint32_t) <=
+		MAX_OFFSET_CFG_REG);
+
+	for (i = 0; i < hdr->cfg_size_in_items; i++) {
+		write32(&regs->geni_cfg_reg0 + cfg_idx_arr[i],
+						cfg_val_arr[i]);
+	}
+
+	/* HPG section 3.1.7.9 */
+	/* non-UART configuration, UART driver can configure as desired for UART
+	 */
+	write32(&regs->geni_rx_rfr_watermark_reg, FIFO_DEPTH - 2);
+
+	/* HPG section 3.1.7.5 */
+	/* Don't change any SPI polarity, client driver will handle this */
+	setbits_le32(&regs->geni_output_ctrl, DEFAULT_IO_OUTPUT_CTRL_MSK);
+
+	/* HPG section 3.1.7.6 */
+	reg_value = read32(&regs->geni_dma_mode_en);
+	if (mode == GSI) {
+		reg_value |= GENI_DMA_MODE_EN_GENI_DMA_MODE_EN_BMSK;
+		write32(&regs->geni_dma_mode_en, reg_value);
+		write32(&regs->se_irq_en, 0x0);
+		write32(&regs->se_gsi_event_en, SE_GSI_EVENT_EN_BMSK);
+	} else if (mode == FIFO) {
+		reg_value &= ~GENI_DMA_MODE_EN_GENI_DMA_MODE_EN_BMSK;
+		write32(&regs->geni_dma_mode_en, reg_value);
+		write32(&regs->se_irq_en, SE_IRQ_EN_RMSK);
+		write32(&regs->se_gsi_event_en, 0x0);
+	} else if (mode == CPU_DMA) {
+		reg_value |= GENI_DMA_MODE_EN_GENI_DMA_MODE_EN_BMSK;
+		write32(&regs->geni_dma_mode_en, reg_value);
+		write32(&regs->se_irq_en, SE_IRQ_EN_RMSK);
+		write32(&regs->se_gsi_event_en, 0x0);
+	}
+
+	/* HPG section 3.1.7.7 */
+	write32(&regs->geni_m_irq_enable,
+				M_COMMON_GENI_M_IRQ_EN);
+	reg_value = S_CMD_OVERRUN_EN | S_ILLEGAL_CMD_EN |
+				S_CMD_CANCEL_EN | S_CMD_ABORT_EN |
+				S_GP_IRQ_0_EN | S_GP_IRQ_1_EN |
+				S_GP_IRQ_2_EN | S_GP_IRQ_3_EN |
+				S_RX_FIFO_WR_ERR_EN | S_RX_FIFO_RD_ERR_EN;
+	write32(&regs->geni_s_irq_enable, reg_value);
+
+	/* HPG section 3.1.7.8 */
+	/* GPI/DMA mode */
+	reg_value = DMA_TX_IRQ_EN_SET_RESET_DONE_EN_SET_BMSK |
+		    DMA_TX_IRQ_EN_SET_SBE_EN_SET_BMSK |
+		    DMA_TX_IRQ_EN_SET_DMA_DONE_EN_SET_BMSK;
+	write32(&regs->dma_tx_irq_en_set, reg_value);
+
+	reg_value = DMA_RX_IRQ_EN_SET_FLUSH_DONE_EN_SET_BMSK |
+		    DMA_RX_IRQ_EN_SET_RESET_DONE_EN_SET_BMSK |
+		    DMA_RX_IRQ_EN_SET_SBE_EN_SET_BMSK |
+		    DMA_RX_IRQ_EN_SET_DMA_DONE_EN_SET_BMSK;
+	write32(&regs->dma_rx_irq_en_set, reg_value);
+
+	/* HPG section 3.1.7.10 */
+	reg_value = (hdr->serial_protocol << FW_REV_PROTOCOL_SHFT) |
+		    (hdr->fw_version & 0xFF <<
+				FW_REV_VERSION_SHFT);
+	write32(&regs->se_geni_fw_revision, reg_value);
+
+	reg_value =
+	    (hdr->serial_protocol << FW_REV_PROTOCOL_SHFT) |
+	    (hdr->fw_version & 0xFF <<
+		FW_REV_VERSION_SHFT);
+	write32(&regs->se_s_fw_revision, reg_value);
+
+	assert(hdr->fw_size_in_items <= SIZE_GENI_FW_RAM);
+
+	memcpy((&regs->se_geni_cfg_ramn), fw_val_arr,
+	       hdr->fw_size_in_items * sizeof(uint32_t));
+
+	/* HPG section 3.1.7.12 */
+	write32(&regs->geni_force_default_reg, 0x1);
+	setbits_le32(&regs->geni_cgc_ctrl, GENI_CGC_CTRL_PROG_RAM_SCLK_OFF_BMSK
+				|GENI_CGC_CTRL_PROG_RAM_HCLK_OFF_BMSK);
+	setbits_le32(&regs->se_geni_clk_ctrl, GENI_CLK_CTRL_SER_CLK_SEL_BMSK);
+	clrbits_le32(&regs->geni_cgc_ctrl,
+		(GENI_CGC_CTRL_PROG_RAM_SCLK_OFF_BMSK |
+		GENI_CGC_CTRL_PROG_RAM_HCLK_OFF_BMSK));
+
+	/* HPG section 3.1.7.13 */
+	/* GSI/DMA mode */
+	setbits_le32(&regs->se_dma_if_en, DMA_IF_EN_DMA_IF_EN_BMSK);
+
+	/* HPG section 3.1.7.14 */
+	reg_value = read32(&regs->se_fifo_if_disable);
+	if ((mode == MIXED) || (mode == FIFO))
+		reg_value &= ~FIFO_IF_DISABLE;
+	else
+		reg_value |= FIFO_IF_DISABLE;
+	write32(&regs->se_fifo_if_disable, reg_value);
+	write32(&regs->se_geni_clk_ctrl, 0x1);
+
+	/* Lock SE from FW loading */
+	write32(&regs->se_geni_fw_multilock_protns, 0x1);
+	write32(&regs->se_geni_fw_multilock_msa, 0x1);
+}
+
+static void qup_common_init(int addr)
+{
+	struct qupv3_common_reg *qupv3_common;
+	/* HPG section 3.1.2 */
+	qupv3_common = (struct qupv3_common_reg *)(uintptr_t) addr;
+	setbits32(&qupv3_common->qupv3_common_cfg_reg,
+			QUPV3_COMMON_CFG_FAST_SWITCH_TO_HIGH_DISABLE_BMSK);
+
+	/* HPG section 3.1.7.3 */
+	setbits32(&qupv3_common->qupv3_se_ahb_m_cfg_reg,
+			QUPV3_SE_AHB_M_CFG_AHB_M_CLK_CGC_ON_BMSK);
+}
+
+void qupv3_fw_init(void)
+{
+	uint8_t i;
+
+	/* Turn on all QUP clocks */
+	for (i = 0; i < QUPV3_SE_MAX; i++)
+		clock_enable_qup(i);
+
+	qup_common_init(QUP_WRAP0_BASE);
+	qup_common_init(QUP_WRAP1_BASE);
+}