src/soc: change "unsigned" to "unsigned int"

Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I9c1228d3f9e7a12fe30c48e3b1f143520fed875c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36332
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>

7 files changed, 56 insertions, 56 deletions

diff --git a/src/soc/samsung/exynos5250/clock.c b/src/soc/samsung/exynos5250/clock.c
index 7e7fe97d18..efb0de31f3 100644
--- a/src/soc/samsung/exynos5250/clock.c
+++ b/src/soc/samsung/exynos5250/clock.c
@@ -385,10 +385,10 @@ void set_mmc_clk(int dev_index, unsigned int div)
 	write32(addr, val);
 }
 
-void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned divisor)
+void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned int divisor)
 {
-	unsigned shift;
-	unsigned mask = 0xff;
+	unsigned int shift;
+	unsigned int mask = 0xff;
 	u32 *reg;
 
 	/*
@@ -428,10 +428,10 @@ void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned divisor)
 	clrsetbits_le32(reg, mask << shift, (divisor & mask) << shift);
 }
 
-void clock_ll_set_ratio(enum periph_id periph_id, unsigned divisor)
+void clock_ll_set_ratio(enum periph_id periph_id, unsigned int divisor)
 {
-	unsigned shift;
-	unsigned mask = 0xff;
+	unsigned int shift;
+	unsigned int mask = 0xff;
 	u32 *reg;
 
 	switch (periph_id) {
diff --git a/src/soc/samsung/exynos5250/gpio.c b/src/soc/samsung/exynos5250/gpio.c
index 96cfef6528..0ae2d2a87a 100644
--- a/src/soc/samsung/exynos5250/gpio.c
+++ b/src/soc/samsung/exynos5250/gpio.c
@@ -154,14 +154,14 @@ void gpio_set_rate(int gpio, int mode)
 	write32(&bank->drv, value);
 }
 
-int gpio_direction_input(unsigned gpio)
+int gpio_direction_input(unsigned int gpio)
 {
 	gpio_cfg_pin(gpio, GPIO_INPUT);
 
 	return 0;
 }
 
-int gpio_direction_output(unsigned gpio, int value)
+int gpio_direction_output(unsigned int gpio, int value)
 {
 	unsigned int val;
 	struct gpio_bank *bank = gpio_get_bank(gpio);
@@ -177,7 +177,7 @@ int gpio_direction_output(unsigned gpio, int value)
 	return 0;
 }
 
-int gpio_get_value(unsigned gpio)
+int gpio_get_value(unsigned int gpio)
 {
 	unsigned int value;
 	struct gpio_bank *bank = gpio_get_bank(gpio);
@@ -186,7 +186,7 @@ int gpio_get_value(unsigned gpio)
 	return !!(value & DAT_MASK(GPIO_BIT(gpio)));
 }
 
-int gpio_set_value(unsigned gpio, int value)
+int gpio_set_value(unsigned int gpio, int value)
 {
 	unsigned int val;
 	struct gpio_bank *bank = gpio_get_bank(gpio);
@@ -207,7 +207,7 @@ int gpio_set_value(unsigned gpio, int value)
  */
 #define GPIO_DELAY_US 5
 
-int gpio_read_mvl3(unsigned gpio)
+int gpio_read_mvl3(unsigned int gpio)
 {
 	int high, low;
 	enum mvl3 value;
@@ -248,7 +248,7 @@ int gpio_read_mvl3(unsigned gpio)
  */
 void gpio_info(void)
 {
-	unsigned gpio;
+	unsigned int gpio;
 
 	for (gpio = 0; gpio < GPIO_MAX_PORT; gpio++) {
 		int cfg = gpio_get_cfg(gpio);
diff --git a/src/soc/samsung/exynos5250/i2c.c b/src/soc/samsung/exynos5250/i2c.c
index 0efd25c62d..e9aabf81bf 100644
--- a/src/soc/samsung/exynos5250/i2c.c
+++ b/src/soc/samsung/exynos5250/i2c.c
@@ -233,7 +233,7 @@ static int i2c_recv_buf(struct i2c_regs *regs, uint8_t *data, int len)
 	return 0;
 }
 
-int platform_i2c_transfer(unsigned bus, struct i2c_msg *segments,
+int platform_i2c_transfer(unsigned int bus, struct i2c_msg *segments,
 			  int seg_count)
 {
 	struct s3c24x0_i2c_bus *i2c = &i2c_busses[bus];
@@ -263,7 +263,7 @@ int platform_i2c_transfer(unsigned bus, struct i2c_msg *segments,
 	return i2c_send_stop(regs) || res;
 }
 
-void i2c_init(unsigned bus, int speed, int slaveadd)
+void i2c_init(unsigned int bus, int speed, int slaveadd)
 {
 	struct s3c24x0_i2c_bus *i2c = &i2c_busses[bus];
 
diff --git a/src/soc/samsung/exynos5250/include/soc/clk.h b/src/soc/samsung/exynos5250/include/soc/clk.h
index 971bfc291c..fab0444e11 100644
--- a/src/soc/samsung/exynos5250/include/soc/clk.h
+++ b/src/soc/samsung/exynos5250/include/soc/clk.h
@@ -561,7 +561,7 @@ struct st_epll_con_val {
  * @param periph_id	Peripheral ID of peripheral to change
  * @param divisor	New divisor for this peripheral's clock
  */
-void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned divisor);
+void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned int divisor);
 
 /**
  * Low-level function to set the clock ratio for a peripheral
@@ -569,7 +569,7 @@ void clock_ll_set_pre_ratio(enum periph_id periph_id, unsigned divisor);
  * @param periph_id	Peripheral ID of peripheral to change
  * @param divisor	New divisor for this peripheral's clock
  */
-void clock_ll_set_ratio(enum periph_id periph_id, unsigned divisor);
+void clock_ll_set_ratio(enum periph_id periph_id, unsigned int divisor);
 
 /**
  * Low-level function that selects the best clock scalars for a given rate and
diff --git a/src/soc/samsung/exynos5250/include/soc/gpio.h b/src/soc/samsung/exynos5250/include/soc/gpio.h
index 959fbd199d..a521bea791 100644
--- a/src/soc/samsung/exynos5250/include/soc/gpio.h
+++ b/src/soc/samsung/exynos5250/include/soc/gpio.h
@@ -482,7 +482,7 @@ void gpio_set_rate(int gpio, int mode);
  * @return -1 if the value cannot be determined. Otherwise returns
  *              the corresponding MVL3 enum value.
  */
-int gpio_read_mvl3(unsigned gpio);
+int gpio_read_mvl3(unsigned int gpio);
 
 void gpio_info(void);
 
@@ -510,7 +510,7 @@ void gpio_info(void);
  * @param gpio	GPIO number
  * @return 0 if ok, -1 on error
  */
-int gpio_direction_input(unsigned gpio);
+int gpio_direction_input(unsigned int gpio);
 
 /**
  * Make a GPIO an output, and set its value.
@@ -519,7 +519,7 @@ int gpio_direction_input(unsigned gpio);
  * @param value	GPIO value (0 for low or 1 for high)
  * @return 0 if ok, -1 on error
  */
-int gpio_direction_output(unsigned gpio, int value);
+int gpio_direction_output(unsigned int gpio, int value);
 
 /**
  * Get a GPIO's value. This will work whether the GPIO is an input
@@ -528,7 +528,7 @@ int gpio_direction_output(unsigned gpio, int value);
  * @param gpio	GPIO number
  * @return 0 if low, 1 if high, -1 on error
  */
-int gpio_get_value(unsigned gpio);
+int gpio_get_value(unsigned int gpio);
 
 /**
  * Set an output GPIO's value. The GPIO must already be an output or
@@ -538,7 +538,7 @@ int gpio_get_value(unsigned gpio);
  * @param value	GPIO value (0 for low or 1 for high)
  * @return 0 if ok, -1 on error
  */
-int gpio_set_value(unsigned gpio, int value);
+int gpio_set_value(unsigned int gpio, int value);
 
 /*
  * Many-value logic (3 states). This can be used for inputs whereby presence
diff --git a/src/soc/samsung/exynos5250/include/soc/i2c.h b/src/soc/samsung/exynos5250/include/soc/i2c.h
index d58237c039..aa458838c4 100644
--- a/src/soc/samsung/exynos5250/include/soc/i2c.h
+++ b/src/soc/samsung/exynos5250/include/soc/i2c.h
@@ -16,6 +16,6 @@
 #ifndef CPU_SAMSUNG_EXYNOS5250_I2C_H
 #define CPU_SAMSUNG_EXYNOS5250_I2C_H
 
-void i2c_init(unsigned bus, int speed, int slaveadd);
+void i2c_init(unsigned int bus, int speed, int slaveadd);
 
 #endif /* CPU_SAMSUNG_EXYNOS5250_I2C_H */
diff --git a/src/soc/samsung/exynos5250/include/soc/tmu.h b/src/soc/samsung/exynos5250/include/soc/tmu.h
index bd15a209a5..cb92c16e48 100644
--- a/src/soc/samsung/exynos5250/include/soc/tmu.h
+++ b/src/soc/samsung/exynos5250/include/soc/tmu.h
@@ -19,39 +19,39 @@
 #define CPU_SAMSUNG_EXYNOS5250_TMU_H
 
 struct tmu_reg {
-	unsigned triminfo;
-	unsigned rsvd1;
-	unsigned rsvd2;
-	unsigned rsvd3;
-	unsigned rsvd4;
-	unsigned triminfo_control;
-	unsigned rsvd5;
-	unsigned rsvd6;
-	unsigned tmu_control;
-	unsigned rsvd7;
-	unsigned tmu_status;
-	unsigned sampling_internal;
-	unsigned counter_value0;
-	unsigned counter_value1;
-	unsigned rsvd8;
-	unsigned rsvd9;
-	unsigned current_temp;
-	unsigned rsvd10;
-	unsigned rsvd11;
-	unsigned rsvd12;
-	unsigned threshold_temp_rise;
-	unsigned threshold_temp_fall;
-	unsigned rsvd13;
-	unsigned rsvd14;
-	unsigned past_temp3_0;
-	unsigned past_temp7_4;
-	unsigned past_temp11_8;
-	unsigned past_temp15_12;
-	unsigned inten;
-	unsigned intstat;
-	unsigned intclear;
-	unsigned rsvd15;
-	unsigned emul_con;
+	unsigned int triminfo;
+	unsigned int rsvd1;
+	unsigned int rsvd2;
+	unsigned int rsvd3;
+	unsigned int rsvd4;
+	unsigned int triminfo_control;
+	unsigned int rsvd5;
+	unsigned int rsvd6;
+	unsigned int tmu_control;
+	unsigned int rsvd7;
+	unsigned int tmu_status;
+	unsigned int sampling_internal;
+	unsigned int counter_value0;
+	unsigned int counter_value1;
+	unsigned int rsvd8;
+	unsigned int rsvd9;
+	unsigned int current_temp;
+	unsigned int rsvd10;
+	unsigned int rsvd11;
+	unsigned int rsvd12;
+	unsigned int threshold_temp_rise;
+	unsigned int threshold_temp_fall;
+	unsigned int rsvd13;
+	unsigned int rsvd14;
+	unsigned int past_temp3_0;
+	unsigned int past_temp7_4;
+	unsigned int past_temp11_8;
+	unsigned int past_temp15_12;
+	unsigned int inten;
+	unsigned int intstat;
+	unsigned int intclear;
+	unsigned int rsvd15;
+	unsigned int emul_con;
 };
 check_member(tmu_reg, emul_con, 0x80);
 
@@ -93,7 +93,7 @@ struct tmu_data {
 /* TMU device specific details and status */
 struct tmu_info {
 	/* base Address for the TMU */
-	unsigned tmu_base;
+	unsigned int tmu_base;
 	/* mux Address for the TMU */
 	int tmu_mux;
 	/* pre-defined values for calibration and thresholds */