soc/mediatek/mt8192: add i2c driver support

Add I2C controller for MT8192, and revise the common I2C driver
to support I2C controller running in APDMA async mode. In that
case we have to initiate a different handshake protocol and reset
I2C differently.

BUG=b:155715435
TEST=Asurada boots up to shell

Signed-off-by: Qii Wang <qii.wang@mediatek.com>
Change-Id: I13835e00eb674a93aa5496a9870d1e601e263368
Reviewed-on: https://review.coreboot.org/c/coreboot/+/47800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>

1 files changed, 38 insertions, 13 deletions

diff --git a/src/soc/mediatek/common/i2c.c b/src/soc/mediatek/common/i2c.c
index 87925ba169..3c54b17738 100644
--- a/src/soc/mediatek/common/i2c.c
+++ b/src/soc/mediatek/common/i2c.c
@@ -10,14 +10,34 @@
 #include <soc/i2c.h>
 #include <device/i2c_simple.h>
 
-static inline void i2c_dma_reset(struct mt_i2c_dma_regs *dma_regs)
+static inline void i2c_hw_reset(uint8_t bus)
 {
-	write32(&dma_regs->dma_rst, 0x1);
-	udelay(50);
-	write32(&dma_regs->dma_rst, 0x2);
-	udelay(50);
-	write32(&dma_regs->dma_rst, 0x0);
-	udelay(50);
+	struct mt_i2c_regs *regs;
+	struct mt_i2c_dma_regs *dma_regs;
+
+	regs = mtk_i2c_bus_controller[bus].i2c_regs;
+	dma_regs = mtk_i2c_bus_controller[bus].i2c_dma_regs;
+
+	if (mtk_i2c_bus_controller[bus].mt_i2c_flag == I2C_APDMA_ASYNC) {
+		write32(&dma_regs->dma_rst, I2C_DMA_WARM_RST);
+		udelay(10);
+		write32(&dma_regs->dma_rst, I2C_DMA_CLR_FLAG);
+		udelay(10);
+		write32(&dma_regs->dma_rst,
+			I2C_DMA_HARD_RST | I2C_DMA_HANDSHAKE_RST);
+		write32(&regs->softreset, I2C_SOFT_RST | I2C_HANDSHAKE_RST);
+		udelay(10);
+		write32(&dma_regs->dma_rst, I2C_DMA_CLR_FLAG);
+		write32(&regs->softreset, I2C_CLR_FLAG);
+	} else {
+		write32(&regs->softreset, I2C_SOFT_RST);
+		write32(&dma_regs->dma_rst, I2C_DMA_WARM_RST);
+		udelay(50);
+		write32(&dma_regs->dma_rst, I2C_DMA_HARD_RST);
+		udelay(50);
+		write32(&dma_regs->dma_rst, I2C_DMA_CLR_FLAG);
+		udelay(50);
+	}
 }
 
 static inline void mtk_i2c_dump_info(struct mt_i2c_regs *regs)
@@ -47,6 +67,7 @@ static uint32_t mtk_i2c_transfer(uint8_t bus, struct i2c_msg *seg,
 {
 	uint32_t ret_code = I2C_OK;
 	uint16_t status;
+	uint16_t dma_sync = 0;
 	uint32_t time_out_val = 0;
 	uint8_t  addr;
 	uint32_t write_len = 0;
@@ -62,6 +83,12 @@ static uint32_t mtk_i2c_transfer(uint8_t bus, struct i2c_msg *seg,
 
 	addr = seg[0].slave;
 
+	if (mtk_i2c_bus_controller[bus].mt_i2c_flag == I2C_APDMA_ASYNC) {
+		dma_sync = I2C_DMA_SKIP_CONFIG | I2C_DMA_ASYNC_MODE;
+		if (mode == I2C_WRITE_READ_MODE)
+			dma_sync |= I2C_DMA_DIR_CHANGE;
+	}
+
 	switch (mode) {
 	case I2C_WRITE_MODE:
 		assert(seg[0].len > 0 && seg[0].len <= 255);
@@ -113,7 +140,7 @@ static uint32_t mtk_i2c_transfer(uint8_t bus, struct i2c_msg *seg,
 		write32(&regs->slave_addr, addr << 1);
 
 		/* Prepare buffer data to start transfer */
-		write32(&dma_regs->dma_con, I2C_DMA_CON_TX);
+		write32(&dma_regs->dma_con, I2C_DMA_CON_TX | dma_sync);
 		write32(&dma_regs->dma_tx_mem_addr, (uintptr_t)_dma_coherent);
 		write32(&dma_regs->dma_tx_len, write_len);
 		break;
@@ -132,7 +159,7 @@ static uint32_t mtk_i2c_transfer(uint8_t bus, struct i2c_msg *seg,
 		write32(&regs->slave_addr, (addr << 1 | 0x1));
 
 		/* Prepare buffer data to start transfer */
-		write32(&dma_regs->dma_con, I2C_DMA_CON_RX);
+		write32(&dma_regs->dma_con, I2C_DMA_CON_RX | dma_sync);
 		write32(&dma_regs->dma_rx_mem_addr, (uintptr_t)_dma_coherent);
 		write32(&dma_regs->dma_rx_len, read_len);
 		break;
@@ -154,7 +181,7 @@ static uint32_t mtk_i2c_transfer(uint8_t bus, struct i2c_msg *seg,
 		write32(&regs->slave_addr, addr << 1);
 
 		/* Prepare buffer data to start transfer */
-		write32(&dma_regs->dma_con, I2C_DMA_CLR_FLAG);
+		write32(&dma_regs->dma_con, I2C_DMA_CLR_FLAG | dma_sync);
 		write32(&dma_regs->dma_tx_mem_addr, (uintptr_t)_dma_coherent);
 		write32(&dma_regs->dma_tx_len, write_len);
 		write32(&dma_regs->dma_rx_mem_addr, (uintptr_t)_dma_coherent);
@@ -206,9 +233,7 @@ static uint32_t mtk_i2c_transfer(uint8_t bus, struct i2c_msg *seg,
 		I2C_TRANSAC_COMP);
 
 	/* reset the i2c controller for next i2c transfer. */
-	write32(&regs->softreset, 0x1);
-
-	i2c_dma_reset(dma_regs);
+	i2c_hw_reset(bus);
 
 	return ret_code;
 }