Move baytrail & fsp_baytrail to the common IFD interface.

- Add the common/firmware subdir to the baytrail & fsp_baytrail
makefiles and remove the code it replaces.
- Update baytrail & fsp_baytrail Kconfigs to use the common code.
- Update the IFD Kconfig help and prompts for the TXE vs ME.
- Whittle away at the CBFS_SIZE defaults.  All the fsp_baytrail
platforms have their own defaults.

Change-Id: I96a9d4acd6578225698dba28d132d203b8fb71a0
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: http://review.coreboot.org/10647
Tested-by: build bot (Jenkins)
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

4 files changed, 4 insertions, 150 deletions

diff --git a/src/soc/intel/baytrail/Kconfig b/src/soc/intel/baytrail/Kconfig
index 2764efb015..5754c15968 100644
--- a/src/soc/intel/baytrail/Kconfig
+++ b/src/soc/intel/baytrail/Kconfig
@@ -35,6 +35,7 @@ config CPU_SPECIFIC_OPTIONS
 	select TSC_SYNC_MFENCE
 	select UDELAY_TSC
 	select SOC_INTEL_COMMON
+	select HAVE_INTEL_FIRMWARE
 
 config BOOTBLOCK_CPU_INIT
 	string
@@ -153,63 +154,6 @@ config ENABLE_BUILTIN_COM1
 	  configure the pads and enable it. This serial port can be used for
 	  the debug console.
 
-config HAVE_ME_BIN
-	bool "Add Intel Management Engine firmware"
-	default y
-	help
-	  The Intel processor in the selected system requires a special firmware
-	  for an integrated controller called Management Engine (ME). The ME
-	  firmware might be provided in coreboot's 3rdparty/blobs repository. If
-	  not and if you don't have the firmware elsewhere, you can still
-	  build coreboot without it. In this case however, you'll have to make
-	  sure that you don't overwrite your ME firmware on your flash ROM.
-
-config ME_BIN_PATH
-	string "Path to management engine firmware"
-	depends on HAVE_ME_BIN
-	default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin"
-
-config HAVE_IFD_BIN
-	bool
-	default y
-
-config BUILD_WITH_FAKE_IFD
-	bool "Build with a fake IFD"
-	default y if !HAVE_IFD_BIN
-	help
-	  If you don't have an Intel Firmware Descriptor (ifd.bin) for your
-	  board, you can select this option and coreboot will build without it.
-	  Though, the resulting coreboot.rom will not contain all parts required
-	  to get coreboot running on your board. You can however write only the
-	  BIOS section to your board's flash ROM and keep the other sections
-	  untouched. Unfortunately the current version of flashrom doesn't
-	  support this yet. But there is a patch pending [1].
-
-	  WARNING: Never write a complete coreboot.rom to your flash ROM if it
-		   was built with a fake IFD. It just won't work.
-
-	  [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html
-
-config IFD_BIOS_SECTION
-	depends on BUILD_WITH_FAKE_IFD
-	string
-	default ""
-
-config IFD_ME_SECTION
-	depends on BUILD_WITH_FAKE_IFD
-	string
-	default ""
-
-config IFD_PLATFORM_SECTION
-	depends on BUILD_WITH_FAKE_IFD
-	string
-	default ""
-
-config IFD_BIN_PATH
-	string "Path to intel firmware descriptor"
-	depends on !BUILD_WITH_FAKE_IFD
-	default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin"
-
 config HAVE_REFCODE_BLOB
 	depends on ARCH_X86
 	bool "An external reference code blob should be put into cbfs."
diff --git a/src/soc/intel/baytrail/Makefile.inc b/src/soc/intel/baytrail/Makefile.inc
index 78e2da6556..741752603b 100644
--- a/src/soc/intel/baytrail/Makefile.inc
+++ b/src/soc/intel/baytrail/Makefile.inc
@@ -9,6 +9,7 @@ subdirs-y += ../../../cpu/x86/smm
 subdirs-y += ../../../cpu/x86/tsc
 subdirs-y += ../../../cpu/intel/microcode
 subdirs-y += ../../../cpu/intel/turbo
+subdirs-y += ../../../southbridge/intel/common/firmware
 
 ramstage-y += memmap.c
 romstage-y += memmap.c
@@ -56,40 +57,6 @@ ramstage-y += placeholders.c
 
 CPPFLAGS_common += -Isrc/soc/intel/baytrail/include
 
-# Run an intermediate step when producing coreboot.rom
-# that adds additional components to the final firmware
-# image outside of CBFS
-INTERMEDIATE:=baytrail_add_me
-
-ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y)
-IFD_BIN_PATH := $(objgenerated)/ifdfake.bin
-IFD_SECTIONS := $(addprefix -b ,$(CONFIG_IFD_BIOS_SECTION:"%"=%)) \
-		$(addprefix -m ,$(CONFIG_IFD_ME_SECTION:"%"=%)) \
-		$(addprefix -p ,$(CONFIG_IFD_PLATFORM_SECTION:"%"=%))
-else
-IFD_BIN_PATH := $(CONFIG_IFD_BIN_PATH)
-endif
-
-baytrail_add_me: $(obj)/coreboot.pre $(IFDTOOL) $(IFDFAKE)
-ifeq ($(CONFIG_BUILD_WITH_FAKE_IFD),y)
-	printf "\n** WARNING **\n"
-	printf "Coreboot will be built with a fake Intel Firmware Descriptor (IFD).\n"
-	printf "Never write a complete coreboot.rom with a fake IFD to your board's\n"
-	printf "flash ROM! Make sure that you only write valid flash regions.\n\n"
-	printf "    IFDFAKE    Building a fake Intel Firmware Descriptor\n"
-	$(IFDFAKE) $(IFD_SECTIONS) $(IFD_BIN_PATH)
-endif
-	printf "    DD         Adding Intel Firmware Descriptor\n"
-	dd if=$(IFD_BIN_PATH) \
-		of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1
-ifeq ($(CONFIG_HAVE_ME_BIN),y)
-	printf "    IFDTOOL    me.bin -> coreboot.pre\n"
-	$(objutil)/ifdtool/ifdtool \
-		-i ME:$(CONFIG_ME_BIN_PATH) \
-		$(obj)/coreboot.pre
-	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-endif
-
 # If an MRC file is an ELF file determine the entry address and first loadable
 # section offset in the file. Subtract the offset from the entry address to
 # determine the final location.
@@ -102,6 +69,4 @@ mrc.bin-file := $(call strip_quotes,$(CONFIG_MRC_FILE))
 mrc.bin-position := $(if $(findstring elf,$(CONFIG_MRC_FILE)),$(shell printf "0x%x" $$(( $(mrcelfentry) - $(mrcelfoffset) )) ),$(CONFIG_MRC_BIN_ADDRESS))
 mrc.bin-type := mrc
 
-PHONY += baytrail_add_me
-
 endif
diff --git a/src/soc/intel/fsp_baytrail/Kconfig b/src/soc/intel/fsp_baytrail/Kconfig
index 95d45da657..d51a238f0d 100644
--- a/src/soc/intel/fsp_baytrail/Kconfig
+++ b/src/soc/intel/fsp_baytrail/Kconfig
@@ -47,6 +47,7 @@ config CPU_SPECIFIC_OPTIONS
 	select TSC_SYNC_MFENCE
 	select UDELAY_TSC
 	select SUPPORT_CPU_UCODE_IN_CBFS
+	select HAVE_INTEL_FIRMWARE
 
 config SOC_INTEL_FSP_BAYTRAIL_MD
 	bool
@@ -94,34 +95,6 @@ config CPU_MICROCODE_CBFS_LOC
 	hex
 	default 0xfff10040
 
-config INCLUDE_ME
-	bool "Include the TXE"
-	default n
-	help
-	  Build the TXE and descriptor.bin into the ROM image.  If you want to use a
-	  descriptor.bin and TXE file from the previous ROM image, you may not want
-	  to build it in here.
-
-config ME_PATH
-	string "Path to ME"
-	depends on INCLUDE_ME
-	help
-	  The path of the TXE and Descriptor files.
-
-config LOCK_MANAGEMENT_ENGINE
-	bool "Lock TXE section"
-	default n
-	depends on INCLUDE_ME
-	help
-	  The Intel Trusted Execution Engine supports preventing write accesses
-	  from the host to the Management Engine section in the firmware
-	  descriptor. If the ME section is locked, it can only be overwritten
-	  with an external SPI flash programmer. You will want this if you
-	  want to increase security of your ROM image once you are sure
-	  that the ME firmware is no longer going to change.
-
-	  If unsure, say N.
-
 config ENABLE_BUILTIN_COM1
 	bool "Enable built-in legacy Serial Port"
 	help
diff --git a/src/soc/intel/fsp_baytrail/Makefile.inc b/src/soc/intel/fsp_baytrail/Makefile.inc
index 92a1fbd988..45ea3e418d 100644
--- a/src/soc/intel/fsp_baytrail/Makefile.inc
+++ b/src/soc/intel/fsp_baytrail/Makefile.inc
@@ -30,6 +30,7 @@ subdirs-y += ../../../cpu/x86/cache
 subdirs-y += ../../../cpu/intel/turbo
 subdirs-y += ../../../lib/fsp
 subdirs-y += fsp
+subdirs-y += ../../../southbridge/intel/common/firmware
 
 ramstage-y += memmap.c
 romstage-y += memmap.c
@@ -62,33 +63,4 @@ ramstage-y += i2c.c
 CPPFLAGS_common += -I$(src)/soc/intel/fsp_baytrail/
 CPPFLAGS_common += -I$(src)/soc/intel/fsp_baytrail/fsp
 
-# Run an intermediate step when producing coreboot.rom
-# that adds additional components to the final firmware
-# image outside of CBFS
-ifeq ($(CONFIG_INCLUDE_ME),y)
-ifneq ($(CONFIG_ME_PATH),)
-INTERMEDIATE:=baytrail_add_txe
-
-baytrail_add_txe: $(obj)/coreboot.pre $(IFDTOOL)
-	printf "    DD         Adding Intel Firmware Descriptor\n"
-	dd if=$(call strip_quotes,$(CONFIG_ME_PATH))/descriptor.bin \
-		of=$(obj)/coreboot.pre conv=notrunc >/dev/null 2>&1
-	printf "    IFDTOOL    txe.bin -> coreboot.pre\n"
-	$(objutil)/ifdtool/ifdtool \
-		-i ME:$(call strip_quotes,$(CONFIG_ME_PATH))/txe.bin \
-		$(obj)/coreboot.pre
-	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-ifeq ($(CONFIG_LOCK_MANAGEMENT_ENGINE),y)
-	printf "    IFDTOOL    Locking Management Engine\n"
-	$(objutil)/ifdtool/ifdtool -l $(obj)/coreboot.pre
-	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-else
-	printf "    IFDTOOL    Unlocking Management Engine\n"
-	$(objutil)/ifdtool/ifdtool -u $(obj)/coreboot.pre
-	mv $(obj)/coreboot.pre.new $(obj)/coreboot.pre
-endif
-
-endif
-endif
-
 endif