soc/intel/common/block: Move common uart function to block/uart

This patch moves uart functions which are common across multiple soc to
block/uart. This will remove redundant code copy from soc
{skylake/apollolake/cannonlake}.

BUG=b:78109109
BRANCH=none
TEST=Build and boot on KBL/APL/CNL platform.

Change-Id: I109d0e5c942e499cb763bde47cb7d53dfbf5cef6
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/26164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>

23 files changed, 332 insertions, 324 deletions

diff --git a/src/soc/intel/apollolake/Kconfig b/src/soc/intel/apollolake/Kconfig
index 4577e76a72..3e84a50cc6 100644
--- a/src/soc/intel/apollolake/Kconfig
+++ b/src/soc/intel/apollolake/Kconfig
@@ -170,12 +170,7 @@ config DRIVERS_I2C_DESIGNWARE_CLOCK_MHZ
 	int
 	default 133
 
-config CONSOLE_UART_BASE_ADDRESS
-	depends on CONSOLE_SERIAL
-	hex
-	default 0xde000000
-
-config SOC_UART_DEBUG
+config UART_DEBUG
 	bool "Enable SoC UART debug port selected by UART_FOR_CONSOLE."
 	default n
 	select CONSOLE_SERIAL
diff --git a/src/soc/intel/apollolake/Makefile.inc b/src/soc/intel/apollolake/Makefile.inc
index 8a37ae41e6..08a5037683 100644
--- a/src/soc/intel/apollolake/Makefile.inc
+++ b/src/soc/intel/apollolake/Makefile.inc
@@ -17,7 +17,7 @@ bootblock-y += lpc.c
 bootblock-y += mmap_boot.c
 bootblock-y += pmutil.c
 bootblock-y += spi.c
-bootblock-$(CONFIG_SOC_UART_DEBUG) += uart.c
+bootblock-$(CONFIG_UART_DEBUG) += uart.c
 bootblock-$(CONFIG_FSP_CAR) += bootblock/cache_as_ram_fsp.S
 
 romstage-y += car.c
@@ -25,7 +25,7 @@ romstage-$(CONFIG_PLATFORM_USES_FSP2_0) += romstage.c
 romstage-y += gspi.c
 romstage-y += heci.c
 romstage-y += i2c.c
-romstage-$(CONFIG_SOC_UART_DEBUG) += uart.c
+romstage-$(CONFIG_UART_DEBUG) += uart.c
 romstage-y += memmap.c
 romstage-y += meminit.c
 ifeq ($(CONFIG_SOC_INTEL_GLK),y)
@@ -42,7 +42,7 @@ smm-y += mmap_boot.c
 smm-y += pmutil.c
 smm-y += smihandler.c
 smm-y += spi.c
-smm-$(CONFIG_SOC_UART_DEBUG) += uart.c
+smm-$(CONFIG_UART_DEBUG) += uart.c
 smm-y += elog.c
 
 ramstage-$(CONFIG_HAVE_ACPI_TABLES) += acpi.c
@@ -57,7 +57,7 @@ ramstage-y += i2c.c
 ramstage-y += lpc.c
 ramstage-y += memmap.c
 ramstage-y += mmap_boot.c
-ramstage-$(CONFIG_SOC_UART_DEBUG) += uart.c
+ramstage-$(CONFIG_UART_DEBUG) += uart.c
 ramstage-y += nhlt.c
 ramstage-y += spi.c
 ramstage-y += systemagent.c
@@ -72,7 +72,7 @@ postcar-y += memmap.c
 postcar-y += mmap_boot.c
 postcar-y += spi.c
 postcar-y += i2c.c
-postcar-$(CONFIG_SOC_UART_DEBUG) += uart.c
+postcar-$(CONFIG_UART_DEBUG) += uart.c
 
 postcar-$(CONFIG_FSP_CAR) += exit_car_fsp.S
 
@@ -82,7 +82,7 @@ verstage-y += gspi.c
 verstage-y += heci.c
 verstage-y += memmap.c
 verstage-y += mmap_boot.c
-verstage-$(CONFIG_SOC_UART_DEBUG) += uart.c
+verstage-$(CONFIG_UART_DEBUG) += uart.c
 verstage-y += pmutil.c
 verstage-y += reset.c
 verstage-y += spi.c
diff --git a/src/soc/intel/apollolake/bootblock/bootblock.c b/src/soc/intel/apollolake/bootblock/bootblock.c
index f9c62282ff..bc5c1709fc 100644
--- a/src/soc/intel/apollolake/bootblock/bootblock.c
+++ b/src/soc/intel/apollolake/bootblock/bootblock.c
@@ -25,13 +25,13 @@
 #include <intelblocks/rtc.h>
 #include <intelblocks/systemagent.h>
 #include <intelblocks/pmclib.h>
+#include <intelblocks/uart.h>
 #include <soc/iomap.h>
 #include <soc/cpu.h>
 #include <soc/gpio.h>
 #include <soc/systemagent.h>
 #include <soc/pci_devs.h>
 #include <soc/pm.h>
-#include <soc/uart.h>
 #include <spi-generic.h>
 #include <timestamp.h>
 
@@ -95,8 +95,8 @@ void bootblock_soc_early_init(void)
 	pmc_global_reset_enable(0);
 
 	/* Prepare UART for serial console. */
-	if (IS_ENABLED(CONFIG_SOC_UART_DEBUG))
-		pch_uart_init();
+	if (IS_ENABLED(CONFIG_UART_DEBUG))
+		uart_bootblock_init();
 
 	if (IS_ENABLED(CONFIG_TPM_ON_FAST_SPI))
 		tpm_enable();
diff --git a/src/soc/intel/apollolake/include/soc/iomap.h b/src/soc/intel/apollolake/include/soc/iomap.h
index 479882f47c..eea1e6199b 100644
--- a/src/soc/intel/apollolake/include/soc/iomap.h
+++ b/src/soc/intel/apollolake/include/soc/iomap.h
@@ -54,4 +54,12 @@
 #define EARLY_I2C_BASE_ADDRESS		0xfe020000
 #define EARLY_I2C_BASE(x)	(EARLY_I2C_BASE_ADDRESS + (0x1000 * (x)))
 
+#define UART_BASE_SIZE			0x1000
+
+#define UART_BASE_0_ADDRESS		0xddffc000
+/* UART BARs are 4KB in size */
+#define UART_BASE_0_ADDR(x)	(UART_BASE_0_ADDRESS + (2 * \
+					UART_BASE_SIZE * (x)))
+#define UART_BASE(x)		UART_BASE_0_ADDR(x)
+
 #endif /* _SOC_APOLLOLAKE_IOMAP_H_ */
diff --git a/src/soc/intel/apollolake/include/soc/uart.h b/src/soc/intel/apollolake/include/soc/uart.h
deleted file mode 100644
index bf8b9d74e3..0000000000
--- a/src/soc/intel/apollolake/include/soc/uart.h
+++ /dev/null
@@ -1,24 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2015 Intel Corp.
- * (Written by Alexandru Gagniuc <alexandrux.gagniuc@intel.com> for Intel Corp.)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#ifndef _SOC_APOLLOLAKE_UART_H_
-#define _SOC_APOLLOLAKE_UART_H_
-
-/* Initialize the console UART including the pads for the configured UART. */
-void pch_uart_init(void);
-
-#endif /* _SOC_APOLLOLAKE_UART_H_ */
diff --git a/src/soc/intel/apollolake/romstage.c b/src/soc/intel/apollolake/romstage.c
index d2353f1743..416877103c 100644
--- a/src/soc/intel/apollolake/romstage.c
+++ b/src/soc/intel/apollolake/romstage.c
@@ -47,7 +47,6 @@
 #include <soc/pci_devs.h>
 #include <soc/pm.h>
 #include <soc/romstage.h>
-#include <soc/uart.h>
 #include <spi_flash.h>
 #include <string.h>
 #include <timestamp.h>
@@ -252,7 +251,7 @@ asmlinkage void car_stage_entry(void)
 static void fill_console_params(FSPM_UPD *mupd)
 {
 	if (IS_ENABLED(CONFIG_CONSOLE_SERIAL)) {
-		if (IS_ENABLED(CONFIG_SOC_UART_DEBUG)) {
+		if (IS_ENABLED(CONFIG_UART_DEBUG)) {
 			mupd->FspmConfig.SerialDebugPortDevice =
 					CONFIG_UART_FOR_CONSOLE;
 			/* use MMIO port type */
diff --git a/src/soc/intel/apollolake/uart.c b/src/soc/intel/apollolake/uart.c
index a59b567e56..875bc49575 100644
--- a/src/soc/intel/apollolake/uart.c
+++ b/src/soc/intel/apollolake/uart.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2015-2017 Intel Corp.
+ * Copyright (C) 2015-2018 Intel Corp.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,96 +20,71 @@
  * shouldn't cause any fragmentation.
  */
 
-#include <cbmem.h>
-#include <console/uart.h>
-#include <device/device.h>
-#include <device/pci.h>
+#include <assert.h>
 #include <intelblocks/uart.h>
 #include <soc/gpio.h>
-#include <soc/nvs.h>
 #include <soc/pci_devs.h>
-#include <soc/uart.h>
+#include <string.h>
 
-static const struct pad_config uart_gpios[] = {
+/* UART pad configuration. Support RXD and TXD for now. */
+const struct uart_gpio_pad_config uart_gpio_pads[] = {
 #if IS_ENABLED(CONFIG_SOC_INTEL_GLK)
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_60, NATIVE, DEEP, NF1, HIZCRx1,
-		DISPUPD), /* LPSS_UART0_RXD */
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_61, NATIVE, DEEP, NF1, HIZCRx1,
-		DISPUPD), /* LPSS_UART0_TXD */
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_64, NATIVE, DEEP, NF1, HIZCRx1,
-		DISPUPD), /* LPSS_UART2_RXD */
-	PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_65, NATIVE, DEEP, NF1, HIZCRx1,
-		DISPUPD), /* LPSS_UART2_TXD */
+	{
+		.console_index = 0,
+		.gpios = {
+			PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_60, NATIVE, DEEP, NF1,
+				HIZCRx1, DISPUPD), /* LPSS_UART0_RXD */
+			PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_61, NATIVE, DEEP, NF1,
+				HIZCRx1, DISPUPD), /* LPSS_UART0_TXD */
+
+		},
+	},
+	{
+		.console_index = 2,
+		.gpios = {
+			PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_64, NATIVE, DEEP, NF1,
+				HIZCRx1, DISPUPD), /* LPSS_UART2_RXD */
+			PAD_CFG_NF_IOSSTATE_IOSTERM(GPIO_65, NATIVE, DEEP, NF1,
+				HIZCRx1, DISPUPD), /* LPSS_UART2_TXD */
+		},
+	},
 #else
-	PAD_CFG_NF(GPIO_42, NATIVE, DEEP, NF1),		/* UART1 RX */
-	PAD_CFG_NF(GPIO_43, NATIVE, DEEP, NF1),		/* UART1 TX */
-	PAD_CFG_NF(GPIO_46, NATIVE, DEEP, NF1),		/* UART2 RX */
-	PAD_CFG_NF(GPIO_47, NATIVE, DEEP, NF1),		/* UART2 TX */
+	{
+		.console_index = 1,
+		.gpios = {
+			PAD_CFG_NF(GPIO_42, NATIVE, DEEP, NF1), /* UART1 RX */
+			PAD_CFG_NF(GPIO_43, NATIVE, DEEP, NF1), /* UART1 TX */
+		},
+	},
+	{
+		.console_index = 2,
+		.gpios = {
+			PAD_CFG_NF(GPIO_46, NATIVE, DEEP, NF1), /* UART2 RX */
+			PAD_CFG_NF(GPIO_47, NATIVE, DEEP, NF1), /* UART2 TX */
+		},
+	},
 #endif
 };
 
-static inline int invalid_uart_for_console(void)
-{
-	/* There are actually only 2 UARTS, and they are named UART1 and
-	 * UART2. They live at pci functions 1 and 2 respectively. */
-	if (CONFIG_UART_FOR_CONSOLE > 2 || CONFIG_UART_FOR_CONSOLE < 1)
-		return 1;
-	return 0;
-}
+const int uart_max_index = ARRAY_SIZE(uart_gpio_pads);
 
-void pch_uart_init(void)
+struct device *soc_uart_console_to_device(int uart_console)
 {
-	uintptr_t base = CONFIG_CONSOLE_UART_BASE_ADDRESS;
-#if defined(__SIMPLE_DEVICE__)
-	pci_devfn_t uart = _PCH_DEV(UART, CONFIG_UART_FOR_CONSOLE & 3);
-#else
-	struct device *uart = _PCH_DEV(UART, CONFIG_UART_FOR_CONSOLE & 3);
-#endif
-
-	/* Get a 0-based pad index. See invalid_uart_for_console() above. */
-	const int pad_index = CONFIG_UART_FOR_CONSOLE - 1;
-
-	if (invalid_uart_for_console())
-		return;
-
-	/* Configure the 2 pads per UART. */
-	gpio_configure_pads(&uart_gpios[pad_index * 2], 2);
-
-	/* Program UART2 BAR0, command, reset and clock register */
-	uart_common_init(uart, base);
-
-}
-
-#if !ENV_SMM
-void pch_uart_read_resources(struct device *dev)
-{
-	pci_dev_read_resources(dev);
-
-	if (IS_ENABLED(CONFIG_SOC_UART_DEBUG) &&
-		uart_is_debug_controller(dev)) {
-		/* will override existing resource. */
-		fixed_mem_resource(dev, PCI_BASE_ADDRESS_0,
-				CONFIG_CONSOLE_UART_BASE_ADDRESS >> 10, 4, 0);
+	/*
+	 * if index is valid, this function will return corresponding structure
+	 * for uart console else will return NULL.
+	 */
+	switch (uart_console) {
+	case 0:
+		return (struct device *)PCH_DEV_UART0;
+	case 1:
+		return (struct device *)PCH_DEV_UART1;
+	case 2:
+		return (struct device *)PCH_DEV_UART2;
+	case 3:
+		return (struct device *)PCH_DEV_UART3;
+	default:
+		printk(BIOS_ERR, "Invalid UART console index\n");
+		return NULL;
 	}
 }
-#endif
-
-bool pch_uart_init_debug_controller_on_resume(void)
-{
-	global_nvs_t *gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS);
-
-	if (gnvs)
-		return !!gnvs->uior;
-
-	return false;
-}
-
-device_t pch_uart_get_debug_controller(void)
-{
-	return _PCH_DEV(UART, CONFIG_UART_FOR_CONSOLE);
-}
-
-uintptr_t uart_platform_base(int idx)
-{
-	return CONFIG_CONSOLE_UART_BASE_ADDRESS;
-}
diff --git a/src/soc/intel/cannonlake/bootblock/bootblock.c b/src/soc/intel/cannonlake/bootblock/bootblock.c
index b7e77976b0..0aac186b42 100644
--- a/src/soc/intel/cannonlake/bootblock/bootblock.c
+++ b/src/soc/intel/cannonlake/bootblock/bootblock.c
@@ -15,6 +15,7 @@
 
 #include <bootblock_common.h>
 #include <intelblocks/gspi.h>
+#include <intelblocks/uart.h>
 #include <soc/bootblock.h>
 #include <soc/iomap.h>
 #include <soc/pch.h>
@@ -31,8 +32,8 @@ void bootblock_soc_early_init(void)
 	bootblock_pch_early_init();
 	bootblock_cpu_init();
 	pch_early_iorange_init();
-	if (IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM))
-		pch_uart_init();
+	if (IS_ENABLED(CONFIG_UART_DEBUG))
+		uart_bootblock_init();
 }
 
 void bootblock_soc_init(void)
diff --git a/src/soc/intel/cannonlake/bootblock/pch.c b/src/soc/intel/cannonlake/bootblock/pch.c
index eb67012781..033f69aaf5 100644
--- a/src/soc/intel/cannonlake/bootblock/pch.c
+++ b/src/soc/intel/cannonlake/bootblock/pch.c
@@ -80,6 +80,7 @@ void bootblock_pch_early_init(void)
 	gspi_early_bar_init();
 	p2sb_enable_bar();
 	p2sb_configure_hpet();
+
 	/*
 	 * Enabling PWRM Base for accessing
 	 * Global Reset Cause Register.
diff --git a/src/soc/intel/cannonlake/include/soc/iomap.h b/src/soc/intel/cannonlake/include/soc/iomap.h
index 75f11c0eee..ed9b29ffee 100644
--- a/src/soc/intel/cannonlake/include/soc/iomap.h
+++ b/src/soc/intel/cannonlake/include/soc/iomap.h
@@ -29,11 +29,13 @@
 #define PCH_TRACE_HUB_BASE_ADDRESS	0xfc800000
 #define PCH_TRACE_HUB_BASE_SIZE	0x00800000
 
-#define UART_DEBUG_BASE_0_SIZE	0x1000
+#define UART_BASE_SIZE		0x1000
+
 #define UART_BASE_0_ADDRESS	0xfe032000
 /* Both UART BAR 0 and 1 are 4KB in size */
 #define UART_BASE_0_ADDR(x)	(UART_BASE_0_ADDRESS + (2 * \
-					UART_DEBUG_BASE_0_SIZE * (x)))
+					UART_BASE_SIZE * (x)))
+#define UART_BASE(x)		UART_BASE_0_ADDR(x)
 
 #define EARLY_I2C_BASE_ADDRESS	0xfe040000
 #define EARLY_I2C_BASE(x)	(EARLY_I2C_BASE_ADDRESS + (0x1000 * (x)))
diff --git a/src/soc/intel/cannonlake/include/soc/pch.h b/src/soc/intel/cannonlake/include/soc/pch.h
index 53dd66a908..da64a7a88f 100644
--- a/src/soc/intel/cannonlake/include/soc/pch.h
+++ b/src/soc/intel/cannonlake/include/soc/pch.h
@@ -29,6 +29,5 @@
 #define PCIE_CLK_FREE			0x80
 
 void pch_log_state(void);
-void pch_uart_init(void);
 
 #endif
diff --git a/src/soc/intel/cannonlake/uart.c b/src/soc/intel/cannonlake/uart.c
index 80404100fe..d03d21e3c1 100644
--- a/src/soc/intel/cannonlake/uart.c
+++ b/src/soc/intel/cannonlake/uart.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2017 Intel Corporation
+ * Copyright (C) 2017-2018 Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,116 +14,73 @@
  */
 
 #include <assert.h>
-#include <cbmem.h>
-#include <console/uart.h>
-#include <device/pci.h>
 #include <device/pci_def.h>
 #include <intelblocks/gpio.h>
 #include <intelblocks/lpss.h>
 #include <intelblocks/pcr.h>
 #include <intelblocks/uart.h>
 #include <soc/iomap.h>
-#include <soc/nvs.h>
 #include <soc/pch.h>
 #include <soc/pci_devs.h>
 #include <soc/pcr_ids.h>
+#include <string.h>
 
-#if !ENV_RAMSTAGE
 /* Serial IO UART controller legacy mode */
 #define PCR_SERIAL_IO_GPPRVRW7		0x618
 #define PCR_SIO_PCH_LEGACY_UART(idx)	(1 << (idx))
 
-static const struct port {
-	struct pad_config pads[2]; /* just TX and RX */
-#if defined(__SIMPLE_DEVICE__)
-	pci_devfn_t dev;
-#else
-	struct device *dev;
-#endif
-} uart_ports[] = {
-	{.dev = PCH_DEV_UART0,
-	 .pads = { PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), /* RX */
-		   PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1)} /* TX */
+const struct uart_gpio_pad_config uart_gpio_pads[] = {
+	{
+		.console_index = 0,
+		.gpios = {
+			PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), /* UART0 RX */
+			PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), /* UART0 TX */
+		},
 	},
-	{.dev = PCH_DEV_UART1,
-	 .pads = { PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), /* RX */
-		   PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1)} /* TX */
+	{
+		.console_index = 1,
+		.gpios = {
+			PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), /* UART1 RX */
+			PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1), /* UART1 TX */
+		},
 	},
-	{.dev = PCH_DEV_UART2,
-	 .pads = { PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* RX */
-		   PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1)} /* TX */
+	{
+		.console_index = 2,
+		.gpios = {
+			PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* UART2 RX */
+			PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* UART2 TX */
+		},
 	}
 };
 
-void pch_uart_init(void)
-{
-	uintptr_t base;
-	const struct port *p;
-
-	assert(CONFIG_UART_FOR_CONSOLE < ARRAY_SIZE(uart_ports));
-	p = &uart_ports[CONFIG_UART_FOR_CONSOLE];
-	base = uart_platform_base(CONFIG_UART_FOR_CONSOLE);
-
-	uart_common_init(p->dev, base);
+const int uart_max_index = ARRAY_SIZE(uart_gpio_pads);
 
-	/* Put UART2 in byte access mode for 16550 compatibility */
-	if (!IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM_32)) {
-		pcr_write32(PID_SERIALIO, PCR_SERIAL_IO_GPPRVRW7,
-			PCR_SIO_PCH_LEGACY_UART(CONFIG_UART_FOR_CONSOLE));
-
-		/*
-		 * Dummy read after setting any of GPPRVRW7.
-		 * Required for UART 16550 8-bit Legacy mode to become active
-		 */
-		lpss_clk_read(base);
-	}
-
-	gpio_configure_pads(p->pads, ARRAY_SIZE(p->pads));
-}
-#endif
-
-#if IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM)
-uintptr_t uart_platform_base(int idx)
+void soc_uart_set_legacy_mode(void)
 {
-	/* We can only have one serial console at a time */
-	return UART_BASE_0_ADDR(idx);
+	pcr_write32(PID_SERIALIO, PCR_SERIAL_IO_GPPRVRW7,
+		PCR_SIO_PCH_LEGACY_UART(CONFIG_UART_FOR_CONSOLE));
+	/*
+	 * Dummy read after setting any of GPPRVRW7.
+	 * Required for UART 16550 8-bit Legacy mode to become active
+	 */
+	lpss_clk_read(UART_BASE(CONFIG_UART_FOR_CONSOLE));
 }
-#endif
 
-device_t pch_uart_get_debug_controller(void)
+struct device *soc_uart_console_to_device(int uart_console)
 {
-	switch (CONFIG_UART_FOR_CONSOLE) {
+	/*
+	 * if index is valid, this function will return corresponding structure
+	 * for uart console else will return NULL.
+	 */
+	switch (uart_console) {
 	case 0:
-		return PCH_DEV_UART0;
+		return (struct device *)PCH_DEV_UART0;
 	case 1:
-		return PCH_DEV_UART1;
+		return (struct device *)PCH_DEV_UART1;
 	case 2:
+		return (struct device *)PCH_DEV_UART2;
 	default:
-		return PCH_DEV_UART2;
-	}
-}
-
-void pch_uart_read_resources(struct device *dev)
-{
-	pci_dev_read_resources(dev);
-
-	/* Set the configured UART base address for the debug port */
-	if (IS_ENABLED(CONFIG_UART_DEBUG) && uart_is_debug_controller(dev)) {
-		struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
-		/* Need to set the base and size for the resource allocator. */
-		res->base = UART_BASE_0_ADDR(CONFIG_UART_FOR_CONSOLE);
-		res->size = UART_DEBUG_BASE_0_SIZE;
-		res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED |
-			IORESOURCE_FIXED;
+		printk(BIOS_ERR, "Invalid UART console index\n");
+		return NULL;
 	}
 }
-
-bool pch_uart_init_debug_controller_on_resume(void)
-{
-	global_nvs_t *gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS);
-
-	if (gnvs)
-		return !!gnvs->uior;
-
-	return false;
-}
diff --git a/src/soc/intel/common/block/acpi/acpi.c b/src/soc/intel/common/block/acpi/acpi.c
index 01a4928b14..dd42f76d33 100644
--- a/src/soc/intel/common/block/acpi/acpi.c
+++ b/src/soc/intel/common/block/acpi/acpi.c
@@ -169,7 +169,7 @@ unsigned long southbridge_write_acpi_tables(struct device *device,
 					    struct acpi_rsdp *rsdp)
 {
 	current = acpi_write_dbg2_pci_uart(rsdp, current,
-					   pch_uart_get_debug_controller(),
+					   uart_get_device(),
 					   ACPI_ACCESS_SIZE_DWORD_ACCESS);
 	return acpi_write_hpet(device, current, rsdp);
 }
diff --git a/src/soc/intel/common/block/include/intelblocks/uart.h b/src/soc/intel/common/block/include/intelblocks/uart.h
index 78feb3e246..545e158b61 100644
--- a/src/soc/intel/common/block/include/intelblocks/uart.h
+++ b/src/soc/intel/common/block/include/intelblocks/uart.h
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2017 Intel Corporation.
+ * Copyright (C) 2017-2018 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -17,14 +17,31 @@
 #define SOC_INTEL_COMMON_BLOCK_UART_H
 
 #include <arch/io.h>
+#include <console/uart.h>
 #include <device/device.h>
+#include <intelblocks/gpio.h>
 #include <stdint.h>
 
+#define MAX_GPIO_PAD_PER_UART		2
+
+struct uart_gpio_pad_config {
+	int console_index;
+	struct pad_config gpios[MAX_GPIO_PAD_PER_UART];
+};
+
+/*
+ * While using this common UART block for any SOC following is expected from soc
+ * 1. SOC will define proper UART_BASE which is base address for UART console.
+ * 2. SOC will return correct device pointer based on console index
+ * 3. SOC will provide appropriate GPIO pad configuration for UART console
+ * 4. SOC will allow common code to set UART into legacy mode if supported.
+ */
+
 /*
  * Common routine to initialize UART controller PCI config space, take it out of
  * reset and configure M/N dividers.
  */
-void uart_common_init(device_t dev, uintptr_t baseaddr);
+void uart_common_init(struct device *dev, uintptr_t baseaddr);
 
 /*
  * Check if UART debug controller is initialized
@@ -33,7 +50,7 @@ void uart_common_init(device_t dev, uintptr_t baseaddr);
  *        out of reset
  * false = otherwise
  */
-bool uart_debug_controller_is_initialized(void);
+bool uart_is_controller_initialized(void);
 
 /*
  * Check if dev corresponds to UART debug port controller.
@@ -44,26 +61,41 @@ bool uart_debug_controller_is_initialized(void);
  */
 bool uart_is_debug_controller(struct device *dev);
 
-/**************************** SoC callbacks ***********************************/
-
-void pch_uart_read_resources(struct device *dev);
+/*
+ * BootBlock pre initialization of UART console
+ */
+void uart_bootblock_init(void);
 
 /*
- * Check if UART debug port controller needs to be initialized on resume.
+ * Get UART debug controller device structure
  *
  * Returns:
- * true = when SoC wants common code to do the UART debug port initialization
- * false = otherwise
+ * Pointer to device structure = If device has a UART debug controller.
+ * NULL = otherwise
  */
-bool pch_uart_init_debug_controller_on_resume(void);
+struct device *uart_get_device(void);
+
+/**************************** SoC callbacks ***********************************/
 
 /*
- * Get UART debug controller device structure
+ * SoC should implement soc_uart_console_to_device() function to
+ * get UART debug controller device structure based on console number
+ * Caller needs to check proper UART console index supported by SoC.
+ * If wrong UART console index is passed to function, it'll return NULL.
+ *
+ * Input:
+ * UART console index selected in config
  *
  * Returns:
  * Pointer to device structure = If device has a UART debug controller.
  * NULL = otherwise
  */
-device_t pch_uart_get_debug_controller(void);
+struct device *soc_uart_console_to_device(int uart_console);
+
+/*
+ * Set UART to legacy mode
+ * Put UART in byte access mode for 16550 compatibility
+ */
+void soc_uart_set_legacy_mode(void);
 
 #endif	/* SOC_INTEL_COMMON_BLOCK_UART_H */
diff --git a/src/soc/intel/common/block/smm/smihandler.c b/src/soc/intel/common/block/smm/smihandler.c
index b49f2a3f3b..c6f9692d81 100644
--- a/src/soc/intel/common/block/smm/smihandler.c
+++ b/src/soc/intel/common/block/smm/smihandler.c
@@ -208,7 +208,7 @@ void smihandler_southbridge_sleep(
 	case ACPI_S3:
 		printk(BIOS_DEBUG, "SMI#: Entering S3 (Suspend-To-RAM)\n");
 
-		gnvs->uior = uart_debug_controller_is_initialized();
+		gnvs->uior = uart_is_controller_initialized();
 
 		/* Invalidate the cache before going to S3 */
 		wbinvd();
diff --git a/src/soc/intel/common/block/uart/Makefile.inc b/src/soc/intel/common/block/uart/Makefile.inc
index 348b153907..d7a770258f 100644
--- a/src/soc/intel/common/block/uart/Makefile.inc
+++ b/src/soc/intel/common/block/uart/Makefile.inc
@@ -1,3 +1,6 @@
 bootblock-$(CONFIG_SOC_INTEL_COMMON_BLOCK_UART) += uart.c
+romstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_UART) += uart.c
 ramstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_UART) += uart.c
 smm-$(CONFIG_SOC_INTEL_COMMON_BLOCK_UART) += uart.c
+postcar-$(CONFIG_SOC_INTEL_COMMON_BLOCK_UART) += uart.c
+verstage-$(CONFIG_SOC_INTEL_COMMON_BLOCK_UART) += uart.c
diff --git a/src/soc/intel/common/block/uart/uart.c b/src/soc/intel/common/block/uart/uart.c
index b84a7ec534..12b99e737e 100644
--- a/src/soc/intel/common/block/uart/uart.c
+++ b/src/soc/intel/common/block/uart/uart.c
@@ -1,7 +1,7 @@
 /*
  * This file is part of the coreboot project.
  *
- * Copyright (C) 2017 Intel Corporation.
+ * Copyright (C) 2017-2018 Intel Corporation.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,7 +14,10 @@
  */
 
 #include <arch/acpi.h>
+#include <assert.h>
 #include <compiler.h>
+#include <cbmem.h>
+#include <console/uart.h>
 #include <device/device.h>
 #include <device/pci.h>
 #include <device/pci_def.h>
@@ -22,8 +25,16 @@
 #include <device/pci_ops.h>
 #include <intelblocks/lpss.h>
 #include <intelblocks/uart.h>
+#include <soc/pci_devs.h>
+#include <soc/iomap.h>
+#include <soc/nvs.h>
+#include <string.h>
 
 #define UART_PCI_ENABLE	(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER)
+#define UART_CONSOLE_INVALID_INDEX	0xFF
+
+extern const struct uart_gpio_pad_config uart_gpio_pads[];
+extern const int uart_max_index;
 
 static void uart_lpss_init(uintptr_t baseaddr)
 {
@@ -35,8 +46,37 @@ static void uart_lpss_init(uintptr_t baseaddr)
 			CONFIG_SOC_INTEL_COMMON_LPSS_UART_CLK_N_VAL);
 }
 
-void uart_common_init(device_t dev, uintptr_t baseaddr)
+#if IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM)
+uintptr_t uart_platform_base(int idx)
+{
+	/* return Base address for UART console index */
+	return UART_BASE_0_ADDR(idx);
+}
+#endif
+
+static int uart_get_valid_index(void)
+{
+	int index;
+
+	for (index = 0; index < uart_max_index; index++) {
+		if (uart_gpio_pads[index].console_index ==
+				CONFIG_UART_FOR_CONSOLE)
+			return index;
+	}
+	/* For valid index, code should not reach here */
+	return UART_CONSOLE_INVALID_INDEX;
+}
+
+void uart_common_init(struct device *device, uintptr_t baseaddr)
 {
+#if defined(__SIMPLE_DEVICE__)
+	pci_devfn_t dev = (pci_devfn_t)(uintptr_t)device;
+#else
+	struct device *dev = device;
+#endif
+	if (!dev)
+		return;
+
 	/* Set UART base address */
 	pci_write_config32(dev, PCI_BASE_ADDRESS_0, baseaddr);
 
@@ -46,27 +86,34 @@ void uart_common_init(device_t dev, uintptr_t baseaddr)
 	uart_lpss_init(baseaddr);
 }
 
-__weak device_t pch_uart_get_debug_controller(void)
+struct device *uart_get_device(void)
 {
 	/*
-	 * device_t can either be a pointer to struct device (e.g. ramstage) or
-	 * a simple integer (e.g. SMM) depending upon whether __SIMPLE_DEVICE__
-	 * is defined for the stage. Thus, the return requires additional
-	 * casting to uintptr_t.
+	 * This function will get called even if UART_DEBUG config options is
+	 * not selected.
+	 * By default returning NULL in case CONFIG_UART_DEBUG option is not
+	 * selected to avoid compilation errors.
 	 */
-	return (device_t)(uintptr_t)NULL;
+	if (!IS_ENABLED(CONFIG_UART_DEBUG))
+		return NULL;
+
+	int console_index = uart_get_valid_index();
+
+	if (console_index != UART_CONSOLE_INVALID_INDEX)
+		return soc_uart_console_to_device(CONFIG_UART_FOR_CONSOLE);
+	else
+		return NULL;
 }
 
-bool uart_debug_controller_is_initialized(void)
+bool uart_is_controller_initialized(void)
 {
+	uintptr_t base;
+
 #if defined(__SIMPLE_DEVICE__)
-	pci_devfn_t dev;
+	pci_devfn_t dev = (pci_devfn_t)(uintptr_t)uart_get_device();
 #else
-	struct device *dev;
+	struct device *dev = uart_get_device();
 #endif
-	uintptr_t base;
-
-	dev = pch_uart_get_debug_controller();
 	if (!dev)
 		return false;
 
@@ -81,22 +128,66 @@ bool uart_debug_controller_is_initialized(void)
 	return !lpss_is_controller_in_reset(base);
 }
 
+static void uart_configure_gpio_pads(void)
+{
+	int index = uart_get_valid_index();
+
+	if (index != UART_CONSOLE_INVALID_INDEX)
+		gpio_configure_pads(uart_gpio_pads[index].gpios,
+				MAX_GPIO_PAD_PER_UART);
+}
+
+void uart_bootblock_init(void)
+{
+	/* Program UART BAR0, command, reset and clock register */
+	uart_common_init(uart_get_device(),
+		UART_BASE(CONFIG_UART_FOR_CONSOLE));
+
+	if (!IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM_32))
+		/* Put UART in byte access mode for 16550 compatibility */
+		soc_uart_set_legacy_mode();
+
+	/* Configure the 2 pads per UART. */
+	uart_configure_gpio_pads();
+}
+
 #if ENV_RAMSTAGE
 
-__weak void pch_uart_read_resources(struct device *dev)
+static void uart_read_resources(struct device *dev)
 {
 	pci_dev_read_resources(dev);
+
+	/* Set the configured UART base address for the debug port */
+	if (IS_ENABLED(CONFIG_UART_DEBUG) && uart_is_debug_controller(dev)) {
+		struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
+		/* Need to set the base and size for the resource allocator. */
+		res->base = UART_BASE(CONFIG_UART_FOR_CONSOLE);
+		res->size = UART_BASE_SIZE;
+		res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED |
+				IORESOURCE_FIXED;
+	}
 }
 
-__weak bool pch_uart_init_debug_controller_on_resume(void)
+/*
+ * Check if UART debug port controller needs to be initialized on resume.
+ *
+ * Returns:
+ * true = when SoC wants debug port initialization on resume
+ * false = otherwise
+ */
+static bool pch_uart_init_debug_controller_on_resume(void)
 {
-	/* By default, do not initialize controller. */
+	global_nvs_t *gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS);
+
+	if (gnvs)
+		return !!gnvs->uior;
+
 	return false;
 }
 
 bool uart_is_debug_controller(struct device *dev)
 {
-	return dev == pch_uart_get_debug_controller();
+	return dev == uart_get_device();
 }
 
 /*
@@ -126,8 +217,7 @@ static bool uart_controller_needs_init(struct device *dev)
 		return false;
 
 	/*
-	 * Call SoC specific routine to confirm it wants to initialize
-	 * controller.
+	 * check if SOC wants to initialize UART on resume
 	 */
 	return pch_uart_init_debug_controller_on_resume();
 }
@@ -146,7 +236,7 @@ static void uart_common_enable_resources(struct device *dev)
 }
 
 static struct device_operations device_ops = {
-	.read_resources		= &pch_uart_read_resources,
+	.read_resources		= &uart_read_resources,
 	.set_resources		= &pci_dev_set_resources,
 	.enable_resources	= &uart_common_enable_resources,
 	.ops_pci		= &pci_dev_ops_pci,
@@ -177,8 +267,8 @@ static const unsigned short pci_device_ids[] = {
 };
 
 static const struct pci_driver pch_uart __pci_driver = {
-	.ops	= &device_ops,
-	.vendor	= PCI_VENDOR_ID_INTEL,
+	.ops		= &device_ops,
+	.vendor		= PCI_VENDOR_ID_INTEL,
 	.devices	= pci_device_ids,
 };
 #endif /* ENV_RAMSTAGE */
diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
index 3e0158bbab..9412b03eb9 100644
--- a/src/soc/intel/skylake/Kconfig
+++ b/src/soc/intel/skylake/Kconfig
@@ -64,6 +64,7 @@ config CPU_SPECIFIC_OPTIONS
 	select SOC_INTEL_COMMON_BLOCK_SGX
 	select SOC_INTEL_COMMON_BLOCK_SMM
 	select SOC_INTEL_COMMON_BLOCK_SMM_IO_TRAP
+	select SOC_INTEL_COMMON_BLOCK_UART
 	select SOC_INTEL_COMMON_BLOCK_VMX
 	select SOC_INTEL_COMMON_PCH_BASE
 	select SOC_INTEL_COMMON_NHLT
diff --git a/src/soc/intel/skylake/acpi.c b/src/soc/intel/skylake/acpi.c
index 5bed11878c..2c06b4bea1 100644
--- a/src/soc/intel/skylake/acpi.c
+++ b/src/soc/intel/skylake/acpi.c
@@ -648,7 +648,7 @@ unsigned long southbridge_write_acpi_tables(struct device *device,
 					     struct acpi_rsdp *rsdp)
 {
 	current = acpi_write_dbg2_pci_uart(rsdp, current,
-					   pch_uart_get_debug_controller(),
+					   uart_get_device(),
 					   ACPI_ACCESS_SIZE_DWORD_ACCESS);
 	current = acpi_write_hpet(device, current, rsdp);
 	return acpi_align_current(current);
diff --git a/src/soc/intel/skylake/bootblock/bootblock.c b/src/soc/intel/skylake/bootblock/bootblock.c
index 1803694132..a2bcaaf9af 100644
--- a/src/soc/intel/skylake/bootblock/bootblock.c
+++ b/src/soc/intel/skylake/bootblock/bootblock.c
@@ -16,6 +16,7 @@
 #include <bootblock_common.h>
 #include <drivers/i2c/designware/dw_i2c.h>
 #include <intelblocks/gspi.h>
+#include <intelblocks/uart.h>
 #include <soc/bootblock.h>
 
 asmlinkage void bootblock_c_entry(uint64_t base_timestamp)
@@ -32,7 +33,7 @@ void bootblock_soc_early_init(void)
 	pch_early_iorange_init();
 
 	if (IS_ENABLED(CONFIG_UART_DEBUG))
-		pch_uart_init();
+		uart_bootblock_init();
 }
 
 void bootblock_soc_init(void)
diff --git a/src/soc/intel/skylake/include/soc/bootblock.h b/src/soc/intel/skylake/include/soc/bootblock.h
index 59ce92a58d..f5065148d3 100644
--- a/src/soc/intel/skylake/include/soc/bootblock.h
+++ b/src/soc/intel/skylake/include/soc/bootblock.h
@@ -27,7 +27,6 @@ static inline void bootblock_fsp_temp_ram_init(void) {}
 /* Bootblock pre console init programming */
 void bootblock_cpu_init(void);
 void bootblock_pch_early_init(void);
-void pch_uart_init(void);
 
 /* Bootblock post console init programming */
 void i2c_early_init(void);
diff --git a/src/soc/intel/skylake/include/soc/iomap.h b/src/soc/intel/skylake/include/soc/iomap.h
index 475d79db71..628a272a54 100644
--- a/src/soc/intel/skylake/include/soc/iomap.h
+++ b/src/soc/intel/skylake/include/soc/iomap.h
@@ -25,11 +25,12 @@
 #define PCH_PRESERVED_BASE_ADDRESS      0xfc800000
 #define PCH_PRESERVED_BASE_SIZE 0x02000000
 
-#define UART_DEBUG_BASE_0_SIZE	0x1000
+#define UART_BASE_SIZE		0x1000
 #define UART_BASE_0_ADDRESS	0xfe030000
 /* Both UART BAR 0 and 1 are 4KB in size */
 #define UART_BASE_0_ADDR(x)	(UART_BASE_0_ADDRESS + (2 * \
-					UART_DEBUG_BASE_0_SIZE * (x)))
+					UART_BASE_SIZE * (x)))
+#define UART_BASE(x)		UART_BASE_0_ADDR(x)
 
 #define EARLY_I2C_BASE_ADDRESS	0xfe040000
 #define EARLY_I2C_BASE(x)	(EARLY_I2C_BASE_ADDRESS + (0x1000 * (x)))
diff --git a/src/soc/intel/skylake/uart.c b/src/soc/intel/skylake/uart.c
index 1b4e96eb60..53d408aebc 100644
--- a/src/soc/intel/skylake/uart.c
+++ b/src/soc/intel/skylake/uart.c
@@ -2,7 +2,7 @@
  * This file is part of the coreboot project.
  *
  * Copyright (C) 2015 Google Inc.
- * Copyright (C) 2015-2017 Intel Corporation
+ * Copyright (C) 2015-2018 Intel Corporation
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -14,106 +14,74 @@
  * GNU General Public License for more details.
  */
 
-#include <cbmem.h>
-#include <console/uart.h>
-#include <device/pci.h>
+#include <console/console.h>
 #include <device/pci_def.h>
 #include <gpio.h>
 #include <intelblocks/lpss.h>
 #include <intelblocks/pcr.h>
 #include <intelblocks/uart.h>
 #include <soc/bootblock.h>
-#include <soc/nvs.h>
 #include <soc/pci_devs.h>
 #include <soc/pcr_ids.h>
+#include <string.h>
 
 /* Serial IO UART controller legacy mode */
 #define PCR_SERIAL_IO_GPPRVRW7		0x618
 #define PCR_SIO_PCH_LEGACY_UART(idx)	(1 << (idx))
 
 /* UART pad configuration. Support RXD and TXD for now. */
-static const struct pad_config uart_pads[][2] = {
+const struct uart_gpio_pad_config uart_gpio_pads[] = {
 	{
-		PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), /* UART0_RXD */
-		PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), /* UART0_TXD */
+		.console_index = 0,
+		.gpios = {
+			PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), /* UART0 RX */
+			PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), /* UART0 TX */
+		},
 	},
 	{
-		PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), /* UART1_RXD */
-		PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1), /* UART1_TXD */
+		.console_index = 1,
+		.gpios = {
+			PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), /* UART1 RX */
+			PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1), /* UART1 TX */
+		},
 	},
 	{
-		PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* UART2_RXD */
-		PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* UART2_TXD */
+		.console_index = 2,
+		.gpios = {
+			PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* UART2 RX */
+			PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* UART2 TX */
+		},
 	}
 };
 
-#if IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM)
-uintptr_t uart_platform_base(int idx)
-{
-	/* Same base address for all debug port usage. In reality UART2
-	 * is currently only supported. */
-	return UART_BASE_0_ADDR(idx);
-}
-#endif
+const int uart_max_index = ARRAY_SIZE(uart_gpio_pads);
 
-void pch_uart_init(void)
+void soc_uart_set_legacy_mode(void)
 {
-	uintptr_t base = uart_platform_base(CONFIG_UART_FOR_CONSOLE);
-
-	uart_common_init(pch_uart_get_debug_controller(), base);
-
-	/* Put UART in byte access mode for 16550 compatibility */
-	if (!IS_ENABLED(CONFIG_DRIVERS_UART_8250MEM_32)) {
-		pcr_write32(PID_SERIALIO, PCR_SERIAL_IO_GPPRVRW7,
-			PCR_SIO_PCH_LEGACY_UART(CONFIG_UART_FOR_CONSOLE));
-
-		/*
-		 * Dummy read after setting any of GPPRVRW7.
-		 * Required for UART 16550 8-bit Legacy mode to become active
-		 */
-		lpss_clk_read(base);
-	}
-
-	gpio_configure_pads(uart_pads[CONFIG_UART_FOR_CONSOLE],
-			    ARRAY_SIZE(uart_pads[CONFIG_UART_FOR_CONSOLE]));
-}
-
-#if !ENV_SMM
-void pch_uart_read_resources(struct device *dev)
-{
-	pci_dev_read_resources(dev);
-
-	/* Set the configured UART base address for the debug port */
-	if (IS_ENABLED(CONFIG_UART_DEBUG) && uart_is_debug_controller(dev)) {
-		struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
-		/* Need to set the base and size for the resource allocator. */
-		res->base = UART_BASE_0_ADDR(CONFIG_UART_FOR_CONSOLE);
-		res->size = UART_DEBUG_BASE_0_SIZE;
-		res->flags = IORESOURCE_MEM | IORESOURCE_ASSIGNED |
-			IORESOURCE_FIXED;
-	}
-}
-#endif
-
-bool pch_uart_init_debug_controller_on_resume(void)
-{
-	global_nvs_t *gnvs = cbmem_find(CBMEM_ID_ACPI_GNVS);
-
-	if (gnvs)
-		return !!gnvs->uior;
-
-	return false;
+	pcr_write32(PID_SERIALIO, PCR_SERIAL_IO_GPPRVRW7,
+		PCR_SIO_PCH_LEGACY_UART(CONFIG_UART_FOR_CONSOLE));
+	/*
+	 * Dummy read after setting any of GPPRVRW7.
+	 * Required for UART 16550 8-bit Legacy mode to become active
+	 */
+	lpss_clk_read(UART_BASE(CONFIG_UART_FOR_CONSOLE));
 }
 
-device_t pch_uart_get_debug_controller(void)
+struct device *soc_uart_console_to_device(int uart_console)
 {
-	switch (CONFIG_UART_FOR_CONSOLE) {
+	/*
+	 * if index is valid, this function will return corresponding structure
+	 * for uart console else will return NULL.
+	 */
+	switch (uart_console) {
 	case 0:
-		return PCH_DEV_UART0;
+		return (struct device *)PCH_DEV_UART0;
 	case 1:
-		return PCH_DEV_UART1;
+		return (struct device *)PCH_DEV_UART1;
 	case 2:
+		return (struct device *)PCH_DEV_UART2;
 	default:
-		return PCH_DEV_UART2;
+		printk(BIOS_ERR, "Invalid UART console index\n");
+		return NULL;
 	}
 }