soc/intel/tigerlake: Do initial SoC commit till ramstage

Clone entirely from Icelake

List of changes on top off initial icelake clone
1. Replace "Icelake" with "Tigerlake"
2. Replace "icl" with "tgl"
3. Replace "icp" with "tgp"
4. Rename structure based on Icelake with Tigerlake
5. Remove and clean below files
   5.a Clean up upd override in fsp_params.c,
	will be added once FSP available.
   5.b Remove __weak functions from fsp_params.c
   5.c Remove dGPU over PCIE enable Kconfig option
6. Add CPU/PCH/SA EDS document number and chapter number
7. Remove unnecessary headers from .c files based on review

Tiger Lake specific changes will follow in subsequent patches.
1. Include GPIO controller delta over ICL
2. FSP-S related UPD overrides as applicable

Change-Id: Id95e2fa9b7a7c6b3b9233d2c438b25a6c4904bbb
Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com>
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36087
Reviewed-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 268 insertions, 0 deletions

diff --git a/src/soc/intel/tigerlake/cpu.c b/src/soc/intel/tigerlake/cpu.c
new file mode 100644
index 0000000000..4174cd2d24
--- /dev/null
+++ b/src/soc/intel/tigerlake/cpu.c
@@ -0,0 +1,268 @@
+/*
+ * This file is part of the coreboot project.
+ *
+ * Copyright (C) 2019 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * This file is created based on Intel Tiger Lake Processor CPU Datasheet
+ * Document number: 575683
+ * Chapter number: 15
+ */
+
+#include <arch/cpu.h>
+#include <console/console.h>
+#include <device/pci.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/x86/mp.h>
+#include <cpu/x86/msr.h>
+#include <cpu/intel/smm_reloc.h>
+#include <cpu/intel/turbo.h>
+#include <fsp/api.h>
+#include <intelblocks/cpulib.h>
+#include <intelblocks/mp_init.h>
+#include <intelblocks/msr.h>
+#include <romstage_handoff.h>
+#include <soc/cpu.h>
+#include <soc/msr.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/smm.h>
+#include <soc/soc_chip.h>
+
+static void soc_fsp_load(void)
+{
+	fsps_load(romstage_handoff_is_resume());
+}
+
+static void configure_isst(void)
+{
+	config_t *conf = config_of_soc();
+	msr_t msr;
+
+	if (conf->speed_shift_enable) {
+		/*
+		 * Kernel driver checks CPUID.06h:EAX[Bit 7] to determine if HWP
+		 * is supported or not. coreboot needs to configure MSR 0x1AA
+		 * which is then reflected in the CPUID register.
+		 */
+		msr = rdmsr(MSR_MISC_PWR_MGMT);
+		msr.lo |= MISC_PWR_MGMT_ISST_EN; /* Enable Speed Shift */
+		msr.lo |= MISC_PWR_MGMT_ISST_EN_INT; /* Enable Interrupt */
+		msr.lo |= MISC_PWR_MGMT_ISST_EN_EPP; /* Enable EPP */
+		wrmsr(MSR_MISC_PWR_MGMT, msr);
+	} else {
+		msr = rdmsr(MSR_MISC_PWR_MGMT);
+		msr.lo &= ~MISC_PWR_MGMT_ISST_EN; /* Disable Speed Shift */
+		msr.lo &= ~MISC_PWR_MGMT_ISST_EN_INT; /* Disable Interrupt */
+		msr.lo &= ~MISC_PWR_MGMT_ISST_EN_EPP; /* Disable EPP */
+		wrmsr(MSR_MISC_PWR_MGMT, msr);
+	}
+}
+
+static void configure_misc(void)
+{
+	msr_t msr;
+
+	config_t *conf = config_of_soc();
+
+	msr = rdmsr(IA32_MISC_ENABLE);
+	msr.lo |= (1 << 0);	/* Fast String enable */
+	msr.lo |= (1 << 3);	/* TM1/TM2/EMTTM enable */
+	/* Set EIST status */
+	cpu_set_eist(conf->eist_enable);
+	wrmsr(IA32_MISC_ENABLE, msr);
+
+	/* Disable Thermal interrupts */
+	msr.lo = 0;
+	msr.hi = 0;
+	wrmsr(IA32_THERM_INTERRUPT, msr);
+
+	/* Enable package critical interrupt only */
+	msr.lo = 1 << 4;
+	msr.hi = 0;
+	wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
+
+	/* Enable PROCHOT */
+	msr = rdmsr(MSR_POWER_CTL);
+	msr.lo |= (1 << 0);	/* Enable Bi-directional PROCHOT as an input*/
+	msr.lo |= (1 << 23);	/* Lock it */
+	wrmsr(MSR_POWER_CTL, msr);
+}
+
+static void enable_lapic_tpr(void)
+{
+	msr_t msr;
+
+	msr = rdmsr(MSR_PIC_MSG_CONTROL);
+	msr.lo &= ~(1 << 10);	/* Enable APIC TPR updates */
+	wrmsr(MSR_PIC_MSG_CONTROL, msr);
+}
+
+static void configure_dca_cap(void)
+{
+	uint32_t feature_flag;
+	msr_t msr;
+
+	/* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */
+	feature_flag = cpu_get_feature_flags_ecx();
+	if (feature_flag & CPUID_DCA) {
+		msr = rdmsr(IA32_PLATFORM_DCA_CAP);
+		msr.lo |= 1;
+		wrmsr(IA32_PLATFORM_DCA_CAP, msr);
+	}
+}
+
+static void enable_pm_timer_emulation(void)
+{
+	/* ACPI PM timer emulation */
+	msr_t msr;
+	/*
+	 * The derived frequency is calculated as follows:
+	 * (CTC_FREQ * msr[63:32]) >> 32 = target frequency.
+	 * Back solve the multiplier so the 3.579545MHz ACPI timer
+	 * frequency is used.
+	 */
+	msr.hi = (3579545ULL << 32) / CTC_FREQ;
+	/* Set PM1 timer IO port and enable */
+	msr.lo = (EMULATE_DELAY_VALUE << EMULATE_DELAY_OFFSET_VALUE) |
+			EMULATE_PM_TMR_EN | (ACPI_BASE_ADDRESS + PM1_TMR);
+	wrmsr(MSR_EMULATE_PM_TIMER, msr);
+}
+
+static void set_energy_perf_bias(u8 policy)
+{
+	msr_t msr;
+	int ecx;
+
+	/* Determine if energy efficient policy is supported. */
+	ecx = cpuid_ecx(0x6);
+	if (!(ecx & (1 << 3)))
+		return;
+
+	/* Energy Policy is bits 3:0 */
+	msr = rdmsr(IA32_ENERGY_PERF_BIAS);
+	msr.lo &= ~0xf;
+	msr.lo |= policy & 0xf;
+	wrmsr(IA32_ENERGY_PERF_BIAS, msr);
+}
+
+static void configure_c_states(void)
+{
+	msr_t msr;
+
+	/* C-state Interrupt Response Latency Control 1 - package C6/C7 short */
+	msr.hi = 0;
+	msr.lo = IRTL_VALID | IRTL_32768_NS | C_STATE_LATENCY_CONTROL_1_LIMIT;
+	wrmsr(MSR_C_STATE_LATENCY_CONTROL_1, msr);
+
+	/* C-state Interrupt Response Latency Control 2 - package C6/C7 long */
+	msr.hi = 0;
+	msr.lo = IRTL_VALID | IRTL_32768_NS | C_STATE_LATENCY_CONTROL_2_LIMIT;
+	wrmsr(MSR_C_STATE_LATENCY_CONTROL_2, msr);
+
+	/* C-state Interrupt Response Latency Control 3 - package C8 */
+	msr.hi = 0;
+	msr.lo = IRTL_VALID | IRTL_32768_NS |
+		C_STATE_LATENCY_CONTROL_3_LIMIT;
+	wrmsr(MSR_C_STATE_LATENCY_CONTROL_3, msr);
+
+	/* C-state Interrupt Response Latency Control 4 - package C9 */
+	msr.hi = 0;
+	msr.lo = IRTL_VALID | IRTL_32768_NS |
+		C_STATE_LATENCY_CONTROL_4_LIMIT;
+	wrmsr(MSR_C_STATE_LATENCY_CONTROL_4, msr);
+
+	/* C-state Interrupt Response Latency Control 5 - package C10 */
+	msr.hi = 0;
+	msr.lo = IRTL_VALID | IRTL_32768_NS |
+		C_STATE_LATENCY_CONTROL_5_LIMIT;
+	wrmsr(MSR_C_STATE_LATENCY_CONTROL_5, msr);
+}
+
+/* All CPUs including BSP will run the following function. */
+void soc_core_init(struct device *cpu)
+{
+	/* Clear out pending MCEs */
+	/* TODO(adurbin): This should only be done on a cold boot. Also, some
+	 * of these banks are core vs package scope. For now every CPU clears
+	 * every bank. */
+	mca_configure();
+
+	/* Enable the local CPU apics */
+	enable_lapic_tpr();
+	setup_lapic();
+
+	/* Configure c-state interrupt response time */
+	configure_c_states();
+
+	/* Configure Enhanced SpeedStep and Thermal Sensors */
+	configure_misc();
+
+	/* Configure Intel Speed Shift */
+	configure_isst();
+
+	/* Enable PM timer emulation */
+	enable_pm_timer_emulation();
+
+	/* Enable Direct Cache Access */
+	configure_dca_cap();
+
+	/* Set energy policy */
+	set_energy_perf_bias(ENERGY_POLICY_NORMAL);
+
+	/* Enable Turbo */
+	enable_turbo();
+}
+
+static void per_cpu_smm_trigger(void)
+{
+	/* Relocate the SMM handler. */
+	smm_relocate();
+}
+
+static void post_mp_init(void)
+{
+	/* Set Max Ratio */
+	cpu_set_max_ratio();
+
+	/*
+	 * Now that all APs have been relocated as well as the BSP let SMIs
+	 * start flowing.
+	 */
+	smm_southbridge_enable(PWRBTN_EN | GBL_EN);
+
+	/* Lock down the SMRAM space. */
+	smm_lock();
+}
+
+static const struct mp_ops mp_ops = {
+	/*
+	 * Skip Pre MP init MTRR programming as MTRRs are mirrored from BSP,
+	 * that are set prior to ramstage.
+	 * Real MTRRs programming are being done after resource allocation.
+	 */
+	.pre_mp_init = soc_fsp_load,
+	.get_cpu_count = get_cpu_count,
+	.get_smm_info = smm_info,
+	.get_microcode_info = get_microcode_info,
+	.pre_mp_smm_init = smm_initialize,
+	.per_cpu_smm_trigger = per_cpu_smm_trigger,
+	.relocation_handler = smm_relocation_handler,
+	.post_mp_init = post_mp_init,
+};
+
+void soc_init_cpus(struct bus *cpu_bus)
+{
+	if (mp_init_with_smm(cpu_bus, &mp_ops))
+		printk(BIOS_ERR, "MP initialization failure.\n");
+}