soc/intel/skylake: Use SCS common code

This patch uses common SCS library to setup
sd card.

Change-Id: I06898e30a9b39f169b35f581a3ee09238f0f40c4
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-on: https://review.coreboot.org/20217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>

1 files changed, 19 insertions, 66 deletions

diff --git a/src/soc/intel/skylake/sd.c b/src/soc/intel/skylake/sd.c
index a9469becf6..12c6abe4fd 100644
--- a/src/soc/intel/skylake/sd.c
+++ b/src/soc/intel/skylake/sd.c
@@ -13,76 +13,29 @@
  * GNU General Public License for more details.
  */
 
-#include <arch/acpi_device.h>
-#include <arch/acpigen.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <gpio.h>
-#include <soc/ramstage.h>
+#include <intelblocks/sd.h>
 #include "chip.h"
 
-#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES)
-static void sd_fill_ssdt(struct device *dev)
+int sd_fill_soc_gpio_info(struct acpi_gpio* gpio, struct device *dev)
 {
 	config_t *config = dev->chip_info;
-	const char *path;
-	struct acpi_gpio default_gpio = {
-		.type = ACPI_GPIO_TYPE_INTERRUPT,
-		.pull = ACPI_GPIO_PULL_NONE,
-		.irq.mode = ACPI_IRQ_EDGE_TRIGGERED,
-		.irq.polarity = ACPI_IRQ_ACTIVE_BOTH,
-		.irq.shared = ACPI_IRQ_SHARED,
-		.irq.wake = ACPI_IRQ_WAKE,
-		.interrupt_debounce_timeout = 10000, /* 100ms */
-		.pin_count = 1,
-		.pins = { config->sdcard_cd_gpio_default }
-	};
-	struct acpi_dp *dp;
-
-	if (!dev->enabled)
-		return;
 
 	/* Nothing to write if GPIO is not set in devicetree */
-	if (!config->sdcard_cd_gpio_default && !config->sdcard_cd_gpio.pins[0])
-		return;
-
-	/* Use device path as the Scope for the SSDT */
-	path = acpi_device_path(dev);
-	if (!path)
-		return;
-	acpigen_write_scope(path);
-	acpigen_write_name("_CRS");
-
-	/* Write GpioInt() as default (if set) or custom from devicetree */
-	acpigen_write_resourcetemplate_header();
-	if (config->sdcard_cd_gpio_default)
-		acpi_device_write_gpio(&default_gpio);
-	else
-		acpi_device_write_gpio(&config->sdcard_cd_gpio);
-	acpigen_write_resourcetemplate_footer();
-
-	/* Bind the cd-gpio name to the GpioInt() resource */
-	dp = acpi_dp_new_table("_DSD");
-	acpi_dp_add_gpio(dp, "cd-gpio", path, 0, 0, 1);
-	acpi_dp_write(dp);
-
-	acpigen_pop_len();
+	if(!config->sdcard_cd_gpio_default && !config->sdcard_cd_gpio.pins[0])
+		return -1;
+
+	if (config->sdcard_cd_gpio_default) {
+		gpio->type = ACPI_GPIO_TYPE_INTERRUPT;
+		gpio->pull = ACPI_GPIO_PULL_NONE;
+		gpio->irq.mode = ACPI_IRQ_EDGE_TRIGGERED;
+		gpio->irq.polarity = ACPI_IRQ_ACTIVE_BOTH;
+		gpio->irq.shared = ACPI_IRQ_SHARED;
+		gpio->irq.wake = ACPI_IRQ_WAKE;
+		gpio->interrupt_debounce_timeout = 10000; /* 100ms */
+		gpio->pin_count = 1;
+		gpio->pins[0] = config->sdcard_cd_gpio_default;
+	} else
+		gpio = &config->sdcard_cd_gpio;
+
+	return 0;
 }
-#endif
-
-static struct device_operations dev_ops = {
-	.read_resources		  = &pci_dev_read_resources,
-	.set_resources		  = &pci_dev_set_resources,
-	.enable_resources	  = &pci_dev_enable_resources,
-	.ops_pci		  = &soc_pci_ops,
-#if IS_ENABLED(CONFIG_HAVE_ACPI_TABLES)
-	.acpi_fill_ssdt_generator = &sd_fill_ssdt,
-#endif
-};
-
-static const struct pci_driver pch_sd __pci_driver = {
-	.ops	= &dev_ops,
-	.vendor	= PCI_VENDOR_ID_INTEL,
-	.device	= 0x9d2d
-};