diff options
| author | Nico Huber <nico.h@gmx.de> | 2019-02-23 19:24:51 +0100 |
|---|---|---|
| committer | Patrick Georgi <pgeorgi@google.com> | 2019-03-01 10:07:10 +0000 |
| commit | 44e89af6e609874f2f18d30f1e66dce8b5a98eff (patch) | |
| tree | 2df8c24b9d6d5695e52257cd5211e6df3af3e46b /src/soc/intel/skylake/lpc.c | |
| parent | ff79341a807d1754dadeb2001ccd9769ef11a34b (diff) | |
soc/intel/skylake: Unify serial IRQ options
We had two ways to configure the serial IRQ mode. One time in the
devicetree for FSP and one time through Kconfig for coreboot. We'll
use `enum serirq_mode` from soc/intel/common/ as a devicetree option
instead. As the default is `quiet mode` here and that is the most
common mode, this saves us a lot of lines.
In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting
settings in devicetree and Kconfig. We'll maintain the `continuous`
selection, although it might be that coreboot overrode this earlier
on the kblrvps.
Note: A lot of Google boards have serial IRQ enabled, while the pin
seems to be unconnected?
Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/31596
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Diffstat (limited to 'src/soc/intel/skylake/lpc.c')
| -rw-r--r-- | src/soc/intel/skylake/lpc.c | 7 |
1 files changed, 3 insertions, 4 deletions
diff --git a/src/soc/intel/skylake/lpc.c b/src/soc/intel/skylake/lpc.c index 8d978222a2..ae6c144346 100644 --- a/src/soc/intel/skylake/lpc.c +++ b/src/soc/intel/skylake/lpc.c @@ -109,6 +109,8 @@ static void clock_gate_8254(struct device *dev) void lpc_soc_init(struct device *dev) { + const config_t *const config = dev->chip_info; + /* Legacy initialization */ isa_dma_init(); reg_script_run_on_dev(PCH_DEV_LPC, pch_misc_init_script); @@ -117,10 +119,7 @@ void lpc_soc_init(struct device *dev) lpc_enable_pci_clk_cntl(); /* Set LPC Serial IRQ mode */ - if (IS_ENABLED(CONFIG_SERIRQ_CONTINUOUS_MODE)) - lpc_set_serirq_mode(SERIRQ_CONTINUOUS); - else - lpc_set_serirq_mode(SERIRQ_QUIET); + lpc_set_serirq_mode(config->serirq_mode); /* Interrupt configuration */ pch_enable_ioapic(dev); |