soc/intel/skylake: Use Broadwell as comparision base for Skylake SOC

Use the Broadwell implementation as the comparison base for Skylake.

BRANCH=none
BUG=None
TEST=None

Change-Id: I22eb55ea89eb0d6883f98e4c72a6d243e819e6d8
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: http://review.coreboot.org/10340
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>

1 files changed, 278 insertions, 0 deletions

diff --git a/src/soc/intel/skylake/Kconfig b/src/soc/intel/skylake/Kconfig
new file mode 100644
index 0000000000..0864e57cc9
--- /dev/null
+++ b/src/soc/intel/skylake/Kconfig
@@ -0,0 +1,278 @@
+config SOC_INTEL_SKYLAKE
+	bool
+	help
+	  Intel Skylake support
+
+if SOC_INTEL_SKYLAKE
+
+config CPU_SPECIFIC_OPTIONS
+	def_bool y
+	select ARCH_BOOTBLOCK_X86_32
+	select ARCH_VERSTAGE_X86_32
+	select ARCH_ROMSTAGE_X86_32
+	select ARCH_RAMSTAGE_X86_32
+	select ALT_CBFS_LOAD_PAYLOAD
+	select ALWAYS_LOAD_OPROM
+	select BACKUP_DEFAULT_SMM_REGION
+	select CACHE_MRC_BIN
+	select CACHE_MRC_SETTINGS
+	select MRC_SETTINGS_PROTECT
+	select CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM
+	select CACHE_ROM
+	select CAR_MIGRATION
+	select COLLECT_TIMESTAMPS
+	select CPU_INTEL_FIRMWARE_INTERFACE_TABLE
+	select SUPPORT_CPU_UCODE_IN_CBFS
+	select HAVE_MONOTONIC_TIMER
+	select HAVE_SMI_HANDLER
+	select HAVE_HARD_RESET
+	select HAVE_USBDEBUG
+	select IOAPIC
+	select MMCONF_SUPPORT
+	select MMCONF_SUPPORT_DEFAULT
+	select RELOCATABLE_MODULES
+	select RELOCATABLE_RAMSTAGE
+	select REG_SCRIPT
+	select PARALLEL_MP
+	select PCIEXP_ASPM
+	select PCIEXP_COMMON_CLOCK
+	select PCIEXP_CLK_PM
+	select PCIEXP_L1_SUB_STATE
+	select SMM_MODULES
+	select SMM_TSEG
+	select SMP
+	select SPI_FLASH
+	select SSE2
+	select SUPPORT_CPU_UCODE_IN_CBFS
+	select TSC_CONSTANT_RATE
+	select TSC_SYNC_MFENCE
+	select UDELAY_TSC
+	select PER_DEVICE_ACPI_TABLES
+	select SOC_INTEL_COMMON
+
+config BOOTBLOCK_CPU_INIT
+	string
+	default "soc/intel/skylake/bootblock/cpu.c"
+
+config BOOTBLOCK_NORTHBRIDGE_INIT
+	string
+	default "soc/intel/skylake/bootblock/systemagent.c"
+
+config BOOTBLOCK_SOUTHBRIDGE_INIT
+	string
+	default "soc/intel/skylake/bootblock/pch.c"
+
+
+config MMCONF_BASE_ADDRESS
+	hex
+	default 0xf0000000
+
+config SERIAL_CPU_INIT
+	bool
+	default n
+
+config SMM_TSEG_SIZE
+	hex
+	default 0x800000
+
+config IED_REGION_SIZE
+	hex
+	default 0x400000
+
+config SMM_RESERVED_SIZE
+	hex
+	default 0x100000
+
+config VGA_BIOS_ID
+	string
+	default "8086,0406"
+
+config CACHE_MRC_SIZE_KB
+	int
+	default 512
+
+config DCACHE_RAM_BASE
+	hex
+	default 0xff7c0000
+
+config DCACHE_RAM_SIZE
+	hex
+	default 0x10000
+	help
+	  The size of the cache-as-ram region required during bootblock
+	  and/or romstage. Note DCACHE_RAM_SIZE and DCACHE_RAM_MRC_VAR_SIZE
+	  must add up to a power of 2.
+
+config DCACHE_RAM_MRC_VAR_SIZE
+	hex
+	default 0x30000
+	help
+	  The amount of cache-as-ram region required by the reference code.
+
+config DCACHE_RAM_ROMSTAGE_STACK_SIZE
+	hex
+	default 0x2000
+	help
+	  The amount of anticipated stack usage from the data cache
+	  during pre-ram rom stage execution.
+
+config HAVE_MRC
+	bool "Add a Memory Reference Code binary"
+	help
+	  Select this option to add a Memory Reference Code binary to
+	  the resulting coreboot image.
+
+	  Note: Without this binary coreboot will not work
+
+if HAVE_MRC
+
+config MRC_FILE
+	string "Intel Memory Reference Code path and filename"
+	depends on HAVE_MRC
+	default "mrc.bin"
+	help
+	  The filename of the file to use as Memory Reference Code binary.
+
+config MRC_BIN_ADDRESS
+	hex
+	default 0xfffa0000
+
+config CACHE_MRC_SETTINGS
+	bool "Save cached MRC settings"
+	default y
+
+endif # HAVE_MRC
+
+config CBFS_SIZE
+	hex "Size of CBFS filesystem in ROM"
+	default 0x100000
+	help
+	  The firmware image has to store more than just coreboot, including:
+	   - a firmware descriptor
+	   - Intel Management Engine firmware
+	   - MRC cache information
+	  This option allows to limit the size of the CBFS portion in the
+	  firmware image.
+
+config PRE_GRAPHICS_DELAY
+	int "Graphics initialization delay in ms"
+	default 0
+	help
+	  On some systems, coreboot boots so fast that connected monitors
+	  (mostly TVs) won't be able to wake up fast enough to talk to the
+	  VBIOS. On those systems we need to wait for a bit before executing
+	  the VBIOS.
+
+config RESET_ON_INVALID_RAMSTAGE_CACHE
+	bool "Reset the system on S3 wake when ramstage cache invalid."
+	default n
+	depends on RELOCATABLE_RAMSTAGE
+	help
+	  The romstage code caches the loaded ramstage program in SMM space.
+	  On S3 wake the romstage will copy over a fresh ramstage that was
+	  cached in the SMM space. This option determines the action to take
+	  when the ramstage cache is invalid. If selected the system will
+	  reset otherwise the ramstage will be reloaded from cbfs.
+
+config INTEL_PCH_UART_CONSOLE
+	bool "Use Serial IO UART for console"
+	default n
+	select HAVE_UART_MEMORY_MAPPED
+	select CONSOLE_SERIAL8250MEM
+	depends on !CONFIG_DRIVERS_OXFORD_OXPCIE
+
+config INTEL_PCH_UART_CONSOLE_NUMBER
+	hex "Serial IO UART number to use for console"
+	default "0x0"
+	depends on INTEL_PCH_UART_CONSOLE
+
+config TTYS0_BASE
+	hex
+	default 0xd6000000
+	depends on INTEL_PCH_UART_CONSOLE
+
+config EHCI_BAR
+	hex
+	default 0xd8000000
+
+config EHCI_DEBUG_OFFSET
+	hex
+	default 0xa0
+
+config SERIRQ_CONTINUOUS_MODE
+	bool
+	default y
+	help
+	  If you set this option to y, the serial IRQ machine will be
+	  operated in continuous mode.
+config HAVE_ME_BIN
+	bool "Add Intel Management Engine firmware"
+	default y
+	help
+	  The Intel processor in the selected system requires a special firmware
+	  for an integrated controller called Management Engine (ME). The ME
+	  firmware might be provided in coreboot's 3rdparty/blobs repository. If
+	  not and if you don't have the firmware elsewhere, you can still
+	  build coreboot without it. In this case however, you'll have to make
+	  sure that you don't overwrite your ME firmware on your flash ROM.
+
+config ME_BIN_PATH
+	string "Path to management engine firmware"
+	depends on HAVE_ME_BIN
+	default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/me.bin"
+
+config HAVE_IFD_BIN
+	bool "Use Intel Firmware Descriptor from existing binary"
+	default n
+
+config BUILD_WITH_FAKE_IFD
+	bool "Build with a fake IFD"
+	default y if !HAVE_IFD_BIN
+	help
+	  If you don't have an Intel Firmware Descriptor (ifd.bin) for your
+	  board, you can select this option and coreboot will build without it.
+	  Though, the resulting coreboot.rom will not contain all parts required
+	  to get coreboot running on your board. You can however write only the
+	  BIOS section to your board's flash ROM and keep the other sections
+	  untouched. Unfortunately the current version of flashrom doesn't
+	  support this yet. But there is a patch pending [1].
+
+	  WARNING: Never write a complete coreboot.rom to your flash ROM if it
+		   was built with a fake IFD. It just won't work.
+
+	  [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html
+
+config IFD_BIOS_SECTION
+	depends on BUILD_WITH_FAKE_IFD
+	string
+	default ""
+
+config IFD_ME_SECTION
+	depends on BUILD_WITH_FAKE_IFD
+	string
+	default ""
+
+config IFD_PLATFORM_SECTION
+	depends on BUILD_WITH_FAKE_IFD
+	string
+	default ""
+
+config IFD_BIN_PATH
+	string "Path to intel firmware descriptor"
+	depends on !BUILD_WITH_FAKE_IFD
+	default "3rdparty/blobs/mainboard/$(MAINBOARDDIR)/descriptor.bin"
+
+config LOCK_MANAGEMENT_ENGINE
+	bool "Lock Management Engine section"
+	default n
+	help
+	  The Intel Management Engine supports preventing write accesses
+	  from the host to the Management Engine section in the firmware
+	  descriptor. If the ME section is locked, it can only be overwritten
+	  with an external SPI flash programmer. You will want this if you
+	  want to increase security of your ROM image once you are sure
+	  that the ME firmware is no longer going to change.
+
+	  If unsure, say N.
+
+endif