soc/intel/quark: Move UART init into romstage.c

Move UART initialization into romstage.c and eliminate uart.c.

TEST=Build and run on Galileo Gen2

Change-Id: I5f2c9b4c566008000c2201c422a0bba63da64487
Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com>
Reviewed-on: https://review.coreboot.org/15009
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <martinroth@google.com>

3 files changed, 8 insertions, 45 deletions

diff --git a/src/soc/intel/quark/romstage/Makefile.inc b/src/soc/intel/quark/romstage/Makefile.inc
index 2f29b06a70..6c92ac4474 100644
--- a/src/soc/intel/quark/romstage/Makefile.inc
+++ b/src/soc/intel/quark/romstage/Makefile.inc
@@ -20,4 +20,3 @@ romstage-y += mtrr.c
 romstage-y += pcie.c
 romstage-y += report_platform.c
 romstage-y += romstage.c
-romstage-$(CONFIG_ENABLE_BUILTIN_HSUART1) += uart.c
diff --git a/src/soc/intel/quark/romstage/romstage.c b/src/soc/intel/quark/romstage/romstage.c
index c86c2eae3d..5be022a8d6 100644
--- a/src/soc/intel/quark/romstage/romstage.c
+++ b/src/soc/intel/quark/romstage/romstage.c
@@ -58,11 +58,17 @@ static const struct reg_script i2c_gpio_controller_init[] = {
 	REG_SCRIPT_END
 };
 
+static const struct reg_script hsuart_init[] = {
+	/* Enable the HSUART */
+	REG_PCI_WRITE32(PCI_BASE_ADDRESS_0, UART_BASE_ADDRESS),
+	REG_PCI_OR8(PCI_COMMAND, PCI_COMMAND_MEMORY),
+	REG_SCRIPT_END
+};
+
 void car_soc_pre_console_init(void)
 {
 	if (IS_ENABLED(CONFIG_ENABLE_BUILTIN_HSUART1))
-		set_base_address_and_enable_uart(0, HSUART1_DEV, HSUART1_FUNC,
-			UART_BASE_ADDRESS);
+		reg_script_run_on_dev(HSUART1_BDF, hsuart_init);
 }
 
 void car_soc_post_console_init(void)
diff --git a/src/soc/intel/quark/romstage/uart.c b/src/soc/intel/quark/romstage/uart.c
deleted file mode 100644
index 9e8f6c529b..0000000000
--- a/src/soc/intel/quark/romstage/uart.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * This file is part of the coreboot project.
- *
- * Copyright (C) 2003 Eric Biederman
- * Copyright (C) 2006-2010 coresystems GmbH
- * Copyright (C) 2015-2016 Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-// Use simple device model for this file even in ramstage
-#define __SIMPLE_DEVICE__
-
-#include <device/pci.h>
-#include <device/pci_def.h>
-#include <rules.h>
-#include <soc/romstage.h>
-
-int set_base_address_and_enable_uart(u8 bus, u8 dev, u8 func, u32 mmio_base)
-{
-	uint16_t reg16;
-
-	/* HSUART controller #1 (B0:D20:F5). */
-	pci_devfn_t uart_bdf = PCI_DEV(bus, dev, func);
-
-	/* Decode BAR0(offset 0x10). */
-	pci_write_config32(uart_bdf, PCI_BASE_ADDRESS_0, mmio_base);
-
-	/* Enable MEMBASE at CMD(offset 0x04). */
-	reg16 = pci_read_config16(uart_bdf, PCI_COMMAND);
-	reg16 |= PCI_COMMAND_MEMORY;
-	pci_write_config16(uart_bdf, PCI_COMMAND, reg16);
-
-	return 0;
-}