soc/intel: Factor out common smmrelocate.c

There are seven identical copies of the same file. One is enough.

Change-Id: I68c023029ec45ecfaab0e756fce774674bb02871
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50937
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

3 files changed, 1 insertions, 251 deletions

diff --git a/src/soc/intel/icelake/Kconfig b/src/soc/intel/icelake/Kconfig
index f28209f581..cb4ef496cf 100644
--- a/src/soc/intel/icelake/Kconfig
+++ b/src/soc/intel/icelake/Kconfig
@@ -46,6 +46,7 @@ config CPU_SPECIFIC_OPTIONS
 	select SOC_INTEL_COMMON_BLOCK_CNVI
 	select SOC_INTEL_COMMON_BLOCK_CPU
 	select SOC_INTEL_COMMON_BLOCK_CPU_MPINIT
+	select SOC_INTEL_COMMON_BLOCK_CPU_SMMRELOCATE
 	select SOC_INTEL_COMMON_BLOCK_GSPI_VERSION_2
 	select SOC_INTEL_COMMON_BLOCK_HDA
 	select SOC_INTEL_COMMON_BLOCK_SA
diff --git a/src/soc/intel/icelake/Makefile.inc b/src/soc/intel/icelake/Makefile.inc
index 05e11f2e32..a48dbbb0b4 100644
--- a/src/soc/intel/icelake/Makefile.inc
+++ b/src/soc/intel/icelake/Makefile.inc
@@ -38,7 +38,6 @@ ramstage-y += lockdown.c
 ramstage-y += p2sb.c
 ramstage-y += pmc.c
 ramstage-y += reset.c
-ramstage-y += smmrelocate.c
 ramstage-y += systemagent.c
 ramstage-y += sd.c
 ramstage-y += me.c
diff --git a/src/soc/intel/icelake/smmrelocate.c b/src/soc/intel/icelake/smmrelocate.c
deleted file mode 100644
index 4df90fd7ce..0000000000
--- a/src/soc/intel/icelake/smmrelocate.c
+++ /dev/null
@@ -1,250 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <console/console.h>
-#include <cpu/intel/common/common.h>
-#include <cpu/intel/em64t101_save_state.h>
-#include <cpu/intel/smm_reloc.h>
-#include <cpu/x86/mp.h>
-#include <cpu/x86/msr.h>
-#include <cpu/x86/mtrr.h>
-#include <cpu/x86/smm.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ops.h>
-#include <smp/node.h>
-#include <soc/cpu.h>
-#include <soc/msr.h>
-#include <soc/pci_devs.h>
-#include <soc/soc_chip.h>
-#include <string.h>
-#include <types.h>
-
-static void update_save_state(int cpu, uintptr_t curr_smbase,
-				uintptr_t staggered_smbase,
-				struct smm_relocation_params *relo_params)
-{
-	u32 smbase;
-	u32 iedbase;
-
-	/*
-	 * The relocated handler runs with all CPUs concurrently. Therefore
-	 * stagger the entry points adjusting SMBASE downwards by save state
-	 * size * CPU num.
-	 */
-	smbase = staggered_smbase;
-	iedbase = relo_params->ied_base;
-
-	printk(BIOS_DEBUG, "New SMBASE=0x%08x IEDBASE=0x%08x\n",
-	       smbase, iedbase);
-
-	/*
-	 * All threads need to set IEDBASE and SMBASE to the relocated
-	 * handler region. However, the save state location depends on the
-	 * smm_save_state_in_msrs field in the relocation parameters. If
-	 * smm_save_state_in_msrs is non-zero then the CPUs are relocating
-	 * the SMM handler in parallel, and each CPUs save state area is
-	 * located in their respective MSR space. If smm_save_state_in_msrs
-	 * is zero then the SMM relocation is happening serially so the
-	 * save state is at the same default location for all CPUs.
-	 */
-	if (relo_params->smm_save_state_in_msrs) {
-		msr_t smbase_msr;
-		msr_t iedbase_msr;
-
-		smbase_msr.lo = smbase;
-		smbase_msr.hi = 0;
-
-		/*
-		 * According the BWG the IEDBASE MSR is in bits 63:32. It's
-		 * not clear why it differs from the SMBASE MSR.
-		 */
-		iedbase_msr.lo = 0;
-		iedbase_msr.hi = iedbase;
-
-		wrmsr(SMBASE_MSR, smbase_msr);
-		wrmsr(IEDBASE_MSR, iedbase_msr);
-	} else {
-		em64t101_smm_state_save_area_t *save_state;
-
-		save_state = (void *)(curr_smbase + SMM_DEFAULT_SIZE -
-				      sizeof(*save_state));
-
-		save_state->smbase = smbase;
-		save_state->iedbase = iedbase;
-	}
-}
-
-/* Returns 1 if SMM MSR save state was set. */
-static int bsp_setup_msr_save_state(struct smm_relocation_params *relo_params)
-{
-	msr_t smm_mca_cap;
-
-	smm_mca_cap = rdmsr(SMM_MCA_CAP_MSR);
-	if (smm_mca_cap.hi & SMM_CPU_SVRSTR_MASK) {
-		msr_t smm_feature_control;
-
-		smm_feature_control = rdmsr(SMM_FEATURE_CONTROL_MSR);
-		smm_feature_control.hi = 0;
-		smm_feature_control.lo |= SMM_CPU_SAVE_EN;
-		wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control);
-		relo_params->smm_save_state_in_msrs = 1;
-	}
-	return relo_params->smm_save_state_in_msrs;
-}
-
-/*
- * The relocation work is actually performed in SMM context, but the code
- * resides in the ramstage module. This occurs by trampolining from the default
- * SMRAM entry point to here.
- */
-void smm_relocation_handler(int cpu, uintptr_t curr_smbase,
-				uintptr_t staggered_smbase)
-{
-	msr_t mtrr_cap;
-	struct smm_relocation_params *relo_params = &smm_reloc_params;
-
-	printk(BIOS_DEBUG, "In relocation handler: CPU %d\n", cpu);
-
-	/*
-	 * Determine if the processor supports saving state in MSRs. If so,
-	 * enable it before the non-BSPs run so that SMM relocation can occur
-	 * in parallel in the non-BSP CPUs.
-	 */
-	if (cpu == 0) {
-		/*
-		 * If smm_save_state_in_msrs is 1 then that means this is the
-		 * 2nd time through the relocation handler for the BSP.
-		 * Parallel SMM handler relocation is taking place. However,
-		 * it is desired to access other CPUs save state in the real
-		 * SMM handler. Therefore, disable the SMM save state in MSRs
-		 * feature.
-		 */
-		if (relo_params->smm_save_state_in_msrs) {
-			msr_t smm_feature_control;
-
-			smm_feature_control = rdmsr(SMM_FEATURE_CONTROL_MSR);
-			smm_feature_control.lo &= ~SMM_CPU_SAVE_EN;
-			wrmsr(SMM_FEATURE_CONTROL_MSR, smm_feature_control);
-		} else if (bsp_setup_msr_save_state(relo_params))
-			/*
-			 * Just return from relocation handler if MSR save
-			 * state is enabled. In that case the BSP will come
-			 * back into the relocation handler to setup the new
-			 * SMBASE as well disabling SMM save state in MSRs.
-			 */
-			return;
-	}
-
-	/* Make appropriate changes to the save state map. */
-	update_save_state(cpu, curr_smbase, staggered_smbase, relo_params);
-
-	/*
-	 * The SMRR MSRs are core-level registers, so if two threads that share
-	 * a core try to both set the lock bit (in the same physical register),
-	 * a #GP will be raised on the second write to that register (which is
-	 * exactly what the lock is supposed to do), therefore secondary threads
-	 * should exit here.
-	 */
-	if (intel_ht_sibling())
-		return;
-
-	/* Write SMRR MSRs based on indicated support. */
-	mtrr_cap = rdmsr(MTRR_CAP_MSR);
-
-	/* Set Lock bit if supported */
-	if (mtrr_cap.lo & SMRR_LOCK_SUPPORTED)
-		relo_params->smrr_mask.lo |= SMRR_PHYS_MASK_LOCK;
-
-	/* Write SMRRs if supported */
-	if (mtrr_cap.lo & SMRR_SUPPORTED)
-		write_smrr(relo_params);
-}
-
-static void fill_in_relocation_params(struct smm_relocation_params *params)
-{
-	uintptr_t tseg_base;
-	size_t tseg_size;
-	/* All range registers are aligned to 4KiB */
-	const u32 rmask = ~(4 * KiB - 1);
-
-	smm_region(&tseg_base, &tseg_size);
-
-	if (!IS_ALIGNED(tseg_base, tseg_size)) {
-		printk(BIOS_WARNING, "TSEG base not aligned with TSEG size! Not setting SMRR\n");
-		return;
-	}
-
-	smm_subregion(SMM_SUBREGION_CHIPSET, &params->ied_base, &params->ied_size);
-
-	/* SMRR has 32-bits of valid address aligned to 4KiB. */
-	params->smrr_base.lo = (tseg_base & rmask) | MTRR_TYPE_WRBACK;
-	params->smrr_base.hi = 0;
-	params->smrr_mask.lo = (~(tseg_size - 1) & rmask) | MTRR_PHYS_MASK_VALID;
-	params->smrr_mask.hi = 0;
-}
-
-static void setup_ied_area(struct smm_relocation_params *params)
-{
-	char *ied_base;
-
-	struct ied_header ied = {
-		.signature = "INTEL RSVD",
-		.size = params->ied_size,
-		.reserved = {0},
-	};
-
-	ied_base = (void *)params->ied_base;
-
-	printk(BIOS_DEBUG, "IED base = 0x%08x\n", (u32)params->ied_base);
-	printk(BIOS_DEBUG, "IED size = 0x%08x\n", (u32)params->ied_size);
-
-	/* Place IED header at IEDBASE. */
-	memcpy(ied_base, &ied, sizeof(ied));
-
-	/* Zero out 32KiB at IEDBASE + 1MiB */
-	memset(ied_base + 1 * MiB, 0, 32 * KiB);
-}
-
-void smm_info(uintptr_t *perm_smbase, size_t *perm_smsize,
-				size_t *smm_save_state_size)
-{
-	printk(BIOS_DEBUG, "Setting up SMI for CPU\n");
-
-	fill_in_relocation_params(&smm_reloc_params);
-
-	smm_subregion(SMM_SUBREGION_HANDLER, perm_smbase, perm_smsize);
-
-	if (smm_reloc_params.ied_size)
-		setup_ied_area(&smm_reloc_params);
-
-	*smm_save_state_size = sizeof(em64t101_smm_state_save_area_t);
-}
-
-void smm_initialize(void)
-{
-	/* Clear the SMM state in the southbridge. */
-	smm_southbridge_clear_state();
-
-	/*
-	 * Run the relocation handler for on the BSP to check and set up
-	 * parallel SMM relocation.
-	 */
-	smm_initiate_relocation();
-
-	if (smm_reloc_params.smm_save_state_in_msrs)
-		printk(BIOS_DEBUG, "Doing parallel SMM relocation.\n");
-}
-
-void smm_relocate(void)
-{
-	/*
-	 * If smm_save_state_in_msrs is non-zero then parallel SMM relocation
-	 * shall take place. Run the relocation handler a second time on the
-	 * BSP to do * the final move. For APs, a relocation handler always
-	 * needs to be run.
-	 */
-	if (smm_reloc_params.smm_save_state_in_msrs)
-		smm_initiate_relocation_parallel();
-	else if (!boot_cpu())
-		smm_initiate_relocation();
-}