soc/intel/fsp_baytrail: Get rid of device_t

Use of device_t has been abandoned in ramstage.

Change-Id: I52534b67cd3cd8489925941f45a756b3d430e072
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/26588
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>

1 files changed, 13 insertions, 13 deletions

diff --git a/src/soc/intel/fsp_baytrail/southcluster.c b/src/soc/intel/fsp_baytrail/southcluster.c
index a547152b5c..6fa2192c52 100644
--- a/src/soc/intel/fsp_baytrail/southcluster.c
+++ b/src/soc/intel/fsp_baytrail/southcluster.c
@@ -50,12 +50,12 @@
 typedef struct soc_intel_fsp_baytrail_config config_t;
 
 static inline void
-add_mmio_resource(device_t dev, int i, unsigned long addr, unsigned long size)
+add_mmio_resource(struct device *dev, int i, unsigned long addr, unsigned long size)
 {
 	mmio_resource(dev, i, addr >> 10, size >> 10);
 }
 
-static void sc_add_mmio_resources(device_t dev)
+static void sc_add_mmio_resources(struct device *dev)
 {
 	add_mmio_resource(dev, 0xfeb, ABORT_BASE_ADDRESS, ABORT_BASE_SIZE);
 	add_mmio_resource(dev, PBASE, PMC_BASE_ADDRESS, PMC_BASE_SIZE);
@@ -167,8 +167,8 @@ static void sc_enable_serial_irqs(struct device *dev)
  */
 static void write_pci_config_irqs(void)
 {
-	device_t irq_dev;
-	device_t targ_dev;
+	struct device *irq_dev;
+	struct device *targ_dev;
 	uint8_t int_line = 0;
 	uint8_t original_int_pin = 0;
 	uint8_t new_int_pin = 0;
@@ -261,7 +261,7 @@ static void write_pci_config_irqs(void)
 	printk(BIOS_DEBUG, "PCI_CFG IRQ: Finished writing PCI config space IRQ assignments\n");
 }
 
-static void sc_pirq_init(device_t dev)
+static void sc_pirq_init(struct device *dev)
 {
 	int i, j;
 	int pirq;
@@ -324,7 +324,7 @@ static inline int io_range_in_default(int base, int size)
  * Note: this function assumes there is no overlap with the default LPC device's
  * claimed range: LPC_DEFAULT_IO_RANGE_LOWER -> LPC_DEFAULT_IO_RANGE_UPPER.
  */
-static void sc_add_io_resource(device_t dev, int base, int size, int index)
+static void sc_add_io_resource(struct device *dev, int base, int size, int index)
 {
 	struct resource *res;
 
@@ -338,7 +338,7 @@ static void sc_add_io_resource(device_t dev, int base, int size, int index)
 	             IORESOURCE_FIXED;
 }
 
-static void sc_add_io_resources(device_t dev)
+static void sc_add_io_resources(struct device *dev)
 {
 	struct resource *res;
 	u8 io_index = 0;
@@ -360,7 +360,7 @@ static void sc_add_io_resources(device_t dev)
 	sc_add_io_resource(dev, ACPI_BASE_ADDRESS, ACPI_BASE_SIZE, ABASE);
 }
 
-static void sc_read_resources(device_t dev)
+static void sc_read_resources(struct device *dev)
 {
 	/* Get the normal PCI resources of this device. */
 	pci_dev_read_resources(dev);
@@ -415,7 +415,7 @@ static void sc_init(struct device *dev)
  */
 
 /* Set bit in function disable register to hide this device. */
-static void sc_disable_devfn(device_t dev)
+static void sc_disable_devfn(struct device *dev)
 {
 	u32 *func_dis = (u32 *)(PMC_BASE_ADDRESS + FUNC_DIS);
 	u32 *func_dis2 = (u32 *)(PMC_BASE_ADDRESS + FUNC_DIS2);
@@ -463,7 +463,7 @@ static void sc_disable_devfn(device_t dev)
 	}
 }
 
-static inline void set_d3hot_bits(device_t dev, int offset)
+static inline void set_d3hot_bits(struct device *dev, int offset)
 {
 	uint32_t reg8;
 	printk(BIOS_DEBUG, "Power management CAP offset 0x%x.\n", offset);
@@ -475,7 +475,7 @@ static inline void set_d3hot_bits(device_t dev, int offset)
 /* Parts of the audio subsystem are powered by the HDA device. Therefore, one
  * cannot put HDA into D3Hot. Instead perform this workaround to make some of
  * the audio paths work for LPE audio. */
-static void hda_work_around(device_t dev)
+static void hda_work_around(struct device *dev)
 {
 	u32 *gctl = (u32 *)(TEMP_BASE_ADDRESS + 0x8);
 
@@ -492,7 +492,7 @@ static void hda_work_around(device_t dev)
 	pci_write_config32(dev, PCI_BASE_ADDRESS_0, 0);
 }
 
-static int place_device_in_d3hot(device_t dev)
+static int place_device_in_d3hot(struct device *dev)
 {
 	unsigned offset;
 
@@ -569,7 +569,7 @@ static int place_device_in_d3hot(device_t dev)
 }
 
 /* Common PCI device function disable. */
-void southcluster_enable_dev(device_t dev)
+void southcluster_enable_dev(struct device *dev)
 {
 	uint32_t reg32;