soc/intel/elkhartlake: Do initial SoC commit till ramstage

Clone entirely from Jasperlake

List of changes on top off initial jasperlake clone
1. Replace "Jasperlake" with "Elkhartlake"
2. Replace "jsl" with "ehl"
3. Replace "jsp" with "mcc"
4. Rename structure based on Jasperlake with Elkhartlake
5. Clean up upd override in fsp_params.c will be added later
6. Sort #include files alphabetically as per comment
7. Remove doc details from espi.c until it is ready
8. Remove pch_isclk & camera clocks related codes
9. Add new #define NMI_STS_CNT & NMI_EN as per comment

Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com>
Change-Id: I372b0bb5912e013445ed8df7c58d0a9ee9a7cf35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>

1 files changed, 57 insertions, 0 deletions

diff --git a/src/soc/intel/elkhartlake/uart.c b/src/soc/intel/elkhartlake/uart.c
new file mode 100644
index 0000000000..cc0e3a848b
--- /dev/null
+++ b/src/soc/intel/elkhartlake/uart.c
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/console.h>
+#include <device/pci_def.h>
+#include <intelblocks/gpio.h>
+#include <intelblocks/lpss.h>
+#include <intelblocks/pcr.h>
+#include <intelblocks/uart.h>
+#include <soc/iomap.h>
+#include <soc/pch.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+
+const struct uart_gpio_pad_config uart_gpio_pads[] = {
+	{
+		.console_index = 0,
+		.gpios = {
+			PAD_CFG_NF(GPP_C8, NONE, DEEP, NF1), /* UART0 RX */
+			PAD_CFG_NF(GPP_C9, NONE, DEEP, NF1), /* UART0 TX */
+		},
+	},
+	{
+		.console_index = 1,
+		.gpios = {
+			PAD_CFG_NF(GPP_C12, NONE, DEEP, NF1), /* UART1 RX */
+			PAD_CFG_NF(GPP_C13, NONE, DEEP, NF1), /* UART1 TX */
+		},
+	},
+	{
+		.console_index = 2,
+		.gpios = {
+			PAD_CFG_NF(GPP_C20, NONE, DEEP, NF1), /* UART2 RX */
+			PAD_CFG_NF(GPP_C21, NONE, DEEP, NF1), /* UART2 TX */
+		},
+	}
+};
+
+const int uart_max_index = ARRAY_SIZE(uart_gpio_pads);
+
+DEVTREE_CONST struct device *soc_uart_console_to_device(int uart_console)
+{
+	/*
+	 * if index is valid, this function will return corresponding structure
+	 * for uart console else will return NULL.
+	 */
+	switch (uart_console) {
+	case 0:
+		return pcidev_path_on_root(PCH_DEVFN_UART0);
+	case 1:
+		return pcidev_path_on_root(PCH_DEVFN_UART1);
+	case 2:
+		return pcidev_path_on_root(PCH_DEVFN_UART2);
+	default:
+		printk(BIOS_ERR, "Invalid UART console index\n");
+		return NULL;
+	}
+}