soc/intel/elkhartlake: Do initial SoC commit till ramstage

Clone entirely from Jasperlake

List of changes on top off initial jasperlake clone
1. Replace "Jasperlake" with "Elkhartlake"
2. Replace "jsl" with "ehl"
3. Replace "jsp" with "mcc"
4. Rename structure based on Jasperlake with Elkhartlake
5. Clean up upd override in fsp_params.c will be added later
6. Sort #include files alphabetically as per comment
7. Remove doc details from espi.c until it is ready
8. Remove pch_isclk & camera clocks related codes
9. Add new #define NMI_STS_CNT & NMI_EN as per comment

Signed-off-by: Tan, Lean Sheng <lean.sheng.tan@intel.com>
Change-Id: I372b0bb5912e013445ed8df7c58d0a9ee9a7cf35
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44802
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>

1 files changed, 192 insertions, 0 deletions

diff --git a/src/soc/intel/elkhartlake/espi.c b/src/soc/intel/elkhartlake/espi.c
new file mode 100644
index 0000000000..71339971fa
--- /dev/null
+++ b/src/soc/intel/elkhartlake/espi.c
@@ -0,0 +1,192 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <arch/io.h>
+#include <arch/ioapic.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <intelblocks/itss.h>
+#include <intelblocks/lpc_lib.h>
+#include <intelblocks/pcr.h>
+#include <pc80/isa-dma.h>
+#include <pc80/i8259.h>
+#include <soc/espi.h>
+#include <soc/iomap.h>
+#include <soc/irq.h>
+#include <soc/pci_devs.h>
+#include <soc/pcr_ids.h>
+#include <soc/soc_chip.h>
+
+/*
+* To reserve certain memory range as reserved range for BIOS usage.
+* For this SOC, the range will be from 0FC800000h till FE7FFFFFh"
+*/
+static const struct lpc_mmio_range ehl_lpc_fixed_mmio_ranges[] = {
+	{ PCH_PRESERVED_BASE_ADDRESS, PCH_PRESERVED_BASE_SIZE },
+	{ 0, 0 }
+};
+
+const struct lpc_mmio_range *soc_get_fixed_mmio_ranges()
+{
+	return ehl_lpc_fixed_mmio_ranges;
+}
+
+void soc_get_gen_io_dec_range(const struct device *dev, uint32_t *gen_io_dec)
+{
+	const config_t *config = config_of(dev);
+
+	gen_io_dec[0] = config->gen1_dec;
+	gen_io_dec[1] = config->gen2_dec;
+	gen_io_dec[2] = config->gen3_dec;
+	gen_io_dec[3] = config->gen4_dec;
+}
+
+void soc_setup_dmi_pcr_io_dec(uint32_t *gen_io_dec)
+{
+	/* Mirror these same settings in DMI PCR */
+	pcr_write32(PID_DMI, PCR_DMI_LPCLGIR1, gen_io_dec[0]);
+	pcr_write32(PID_DMI, PCR_DMI_LPCLGIR2, gen_io_dec[1]);
+	pcr_write32(PID_DMI, PCR_DMI_LPCLGIR3, gen_io_dec[2]);
+	pcr_write32(PID_DMI, PCR_DMI_LPCLGIR4, gen_io_dec[3]);
+}
+
+#if ENV_RAMSTAGE
+static void soc_mirror_dmi_pcr_io_dec(void)
+{
+	struct device *dev = pcidev_on_root(PCH_DEV_SLOT_ESPI, 0);
+	uint32_t io_dec_arr[] = {
+		pci_read_config32(dev, ESPI_GEN1_DEC),
+		pci_read_config32(dev, ESPI_GEN2_DEC),
+		pci_read_config32(dev, ESPI_GEN3_DEC),
+		pci_read_config32(dev, ESPI_GEN4_DEC),
+	};
+	/* Mirror these same settings in DMI PCR */
+	soc_setup_dmi_pcr_io_dec(&io_dec_arr[0]);
+}
+
+static void pch_enable_ioapic(const struct device *dev)
+{
+	uint32_t reg32;
+	/* PCH-LP has 120 redirection entries */
+	const int redir_entries = 120;
+
+	set_ioapic_id((void *)IO_APIC_ADDR, 0x02);
+
+	/* affirm full set of redirection table entries ("write once") */
+	reg32 = io_apic_read((void *)IO_APIC_ADDR, 0x01);
+
+	reg32 &= ~0x00ff0000;
+	reg32 |= (redir_entries - 1) << 16;
+
+	io_apic_write((void *)IO_APIC_ADDR, 0x01, reg32);
+
+	/*
+	 * Select Boot Configuration register (0x03) and
+	 * use Processor System Bus (0x01) to deliver interrupts.
+	 */
+	io_apic_write((void *)IO_APIC_ADDR, 0x03, 0x01);
+}
+/*
+ * PIRQ[n]_ROUT[3:0] - PIRQ Routing Control
+ * 0x00 - 0000 = Reserved
+ * 0x01 - 0001 = Reserved
+ * 0x02 - 0010 = Reserved
+ * 0x03 - 0011 = IRQ3
+ * 0x04 - 0100 = IRQ4
+ * 0x05 - 0101 = IRQ5
+ * 0x06 - 0110 = IRQ6
+ * 0x07 - 0111 = IRQ7
+ * 0x08 - 1000 = Reserved
+ * 0x09 - 1001 = IRQ9
+ * 0x0A - 1010 = IRQ10
+ * 0x0B - 1011 = IRQ11
+ * 0x0C - 1100 = IRQ12
+ * 0x0D - 1101 = Reserved
+ * 0x0E - 1110 = IRQ14
+ * 0x0F - 1111 = IRQ15
+ * PIRQ[n]_ROUT[7] - PIRQ Routing Control
+ * 0x80 - The PIRQ is not routed.
+ */
+
+void soc_pch_pirq_init(const struct device *dev)
+{
+	struct device *irq_dev;
+	uint8_t pch_interrupt_routing[MAX_PXRC_CONFIG];
+
+	pch_interrupt_routing[0] = PCH_IRQ11;
+	pch_interrupt_routing[1] = PCH_IRQ10;
+	pch_interrupt_routing[2] = PCH_IRQ11;
+	pch_interrupt_routing[3] = PCH_IRQ11;
+	pch_interrupt_routing[4] = PCH_IRQ11;
+	pch_interrupt_routing[5] = PCH_IRQ11;
+	pch_interrupt_routing[6] = PCH_IRQ11;
+	pch_interrupt_routing[7] = PCH_IRQ11;
+
+	itss_irq_init(pch_interrupt_routing);
+
+	for (irq_dev = all_devices; irq_dev; irq_dev = irq_dev->next) {
+		uint8_t int_pin = 0, int_line = 0;
+
+		if (!irq_dev->enabled || irq_dev->path.type != DEVICE_PATH_PCI)
+			continue;
+
+		int_pin = pci_read_config8(irq_dev, PCI_INTERRUPT_PIN);
+
+		switch (int_pin) {
+		case 1: /* INTA# */
+			int_line = PCH_IRQ11;
+			break;
+		case 2: /* INTB# */
+			int_line = PCH_IRQ10;
+			break;
+		case 3: /* INTC# */
+			int_line = PCH_IRQ11;
+			break;
+		case 4: /* INTD# */
+			int_line = PCH_IRQ11;
+			break;
+		}
+
+		if (!int_line)
+			continue;
+
+		pci_write_config8(irq_dev, PCI_INTERRUPT_LINE, int_line);
+	}
+}
+
+static void pch_misc_init(void)
+{
+	uint8_t reg8;
+
+	/* Setup NMI on errors, disable SERR */
+	reg8 = (inb(NMI_STS_CNT) & 0xf0);
+	outb((reg8 | (1 << 2)), NMI_STS_CNT);
+
+	/* Disable NMI sources */
+	outb((1 << 7), NMI_EN);
+};
+
+void lpc_soc_init(struct device *dev)
+{
+	/* Legacy initialization */
+	isa_dma_init();
+	pch_misc_init();
+
+	/* Enable CLKRUN_EN for power gating ESPI */
+	lpc_enable_pci_clk_cntl();
+
+	/* Set ESPI Serial IRQ mode */
+	if (CONFIG(SERIRQ_CONTINUOUS_MODE))
+		lpc_set_serirq_mode(SERIRQ_CONTINUOUS);
+	else
+		lpc_set_serirq_mode(SERIRQ_QUIET);
+
+	/* Interrupt configuration */
+	pch_enable_ioapic(dev);
+	soc_pch_pirq_init(dev);
+	setup_i8259();
+	i8259_configure_irq_trigger(9, 1);
+	soc_mirror_dmi_pcr_io_dec();
+}
+
+#endif