diff options
| author | Angel Pons <th3fanbus@gmail.com> | 2022-05-16 16:32:06 +0200 |
|---|---|---|
| committer | Felix Held <felix-coreboot@felixheld.de> | 2022-05-17 21:09:16 +0000 |
| commit | 035c6c8559b0e1849c89555803075c37cd6c11b2 (patch) | |
| tree | 89038f7d048b05458c0e001bbaabc83af6552cb7 /src/soc/intel/elkhartlake/chip.h | |
| parent | da541327d2ecfc9043205a7bd81c0ed71c4313fa (diff) | |
soc/intel/elkhartlake/chip.h: Drop unused members
Remove devicetree options that aren't used anywhere in the code.
Change-Id: I7eace61079e14423325332d277fdda4f986fd133
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64403
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Diffstat (limited to 'src/soc/intel/elkhartlake/chip.h')
| -rw-r--r-- | src/soc/intel/elkhartlake/chip.h | 82 |
1 files changed, 1 insertions, 81 deletions
diff --git a/src/soc/intel/elkhartlake/chip.h b/src/soc/intel/elkhartlake/chip.h index 8764657b19..618d00f2e8 100644 --- a/src/soc/intel/elkhartlake/chip.h +++ b/src/soc/intel/elkhartlake/chip.h @@ -234,21 +234,13 @@ struct soc_intel_elkhartlake_config { /* Enable if SD Card Power Enable Signal is Active High */ uint8_t SdCardPowerEnableActiveHigh; - /* Gfx related */ + /* HECI related */ uint8_t Heci2Enable; uint8_t Heci3Enable; - /* Gfx related */ - uint8_t SkipExtGfxScan; - - uint8_t Device4Enable; - /* Enable/Disable EIST. 1b:Enabled, 0b:Disabled */ uint8_t eist_enable; - /* Enable C6 DRAM */ - uint8_t enable_c6dram; - /* * SerialIO device mode selection: * PchSerialIoDisabled, @@ -308,9 +300,6 @@ struct soc_intel_elkhartlake_config { /* GPIO SD card detect pin */ unsigned int sdcard_cd_gpio; - /* CNVi BT Audio Offload: Enable/Disable BT Audio Offload. */ - bool CnviBtAudioOffload; - /* * Override GPIO PM configuration: * 0: Use FSP default GPIO PM program, @@ -356,22 +345,6 @@ struct soc_intel_elkhartlake_config { uint8_t DdiPort3Ddc; uint8_t DdiPort4Ddc; - /* Hybrid storage mode enable (1) / disable (0) - * This mode makes FSP detect Optane and NVME and set PCIe lane mode - * accordingly */ - uint8_t HybridStorageMode; - - /* - * Override CPU flex ratio value: - * CPU ratio value controls the maximum processor non-turbo ratio. - * Valid Range 0 to 63. - * In general descriptor provides option to set default cpu flex ratio. - * Default cpu flex ratio 0 ensures booting with non-turbo max frequency. - * That's the reason FSP skips cpu_ratio override if cpu_ratio is 0. - * Only override CPU flex ratio to not boot with non-turbo max. - */ - uint8_t cpu_ratio_override; - /* Skip CPU replacement check * 0: disable * 1: enable @@ -405,59 +378,6 @@ struct soc_intel_elkhartlake_config { } fivr; /* - * SLP_S3 Minimum Assertion Width Policy - * 1 = 60us - * 2 = 1ms - * 3 = 50ms (default) - * 4 = 2s - */ - uint8_t PchPmSlpS3MinAssert; - - /* - * SLP_S4 Minimum Assertion Width Policy - * 1 = 1s (default) - * 2 = 2s - * 3 = 3s - * 4 = 4s - */ - uint8_t PchPmSlpS4MinAssert; - - /* - * SLP_SUS Minimum Assertion Width Policy - * 1 = 0ms - * 2 = 500ms - * 3 = 1s - * 4 = 4s (default) - */ - uint8_t PchPmSlpSusMinAssert; - - /* - * SLP_A Minimum Assertion Width Policy - * 1 = 0ms - * 2 = 4s - * 3 = 98ms - * 4 = 2s (default) - */ - uint8_t PchPmSlpAMinAssert; - - /* - * PCH PM Reset Power Cycle Duration - * 0 = 4s (default) - * 1 = 1s - * 2 = 2s - * 3 = 3s - * 4 = 4s - * - * NOTE: Duration programmed in the PchPmPwrCycDur should never be smaller than the - * stretch duration programmed in the following registers: - * - GEN_PMCON_A.SLP_S3_MIN_ASST_WDTH (PchPmSlpS3MinAssert) - * - GEN_PMCON_A.S4MAW (PchPmSlpS4MinAssert) - * - PM_CFG.SLP_A_MIN_ASST_WDTH (PchPmSlpAMinAssert) - * - PM_CFG.SLP_LAN_MIN_ASST_WDTH - */ - uint8_t PchPmPwrCycDur; - - /* * PCH power button override period. * Values: 0x0 - 4s, 0x1 - 6s, 0x2 - 8s, 0x3 - 10s, 0x4 - 12s, 0x5 - 14s */ |