soc/intel/meteorlake: Enable `DEFAULT_X2APIC_LATE_WORKAROUND`

This patch ensures Intel Meteor Lake can enable the X2APIC feature.

While debugging Intel Meteor Lake (MTL) based platforms it seems like
enabling `DEFAULT_X2APIC` runs into a hang while coreboot tries to
bring the application processors (APs) from reset using X2APIC mode.

[INFO ] LAPIC 0x10 switched to X2APIC mode.
...
[DEBUG] Attempting to start 3 APs
[DEBUG] Waiting for 10ms after sending INIT.
[DEBUG] Waiting for SIPI to complete...
[DEBUG] done.
[DEBUG] Waiting for SIPI to complete...
[DEBUG] done.
[ERROR] Not all APs checked in: 0/3.
[DEBUG] 0/3 eventually checked in?
[ERROR] MP initialization failure.
[ERROR] MP initialization failure.

Note: The AP bring up flow between XAPIC and X2APIC are the same
except the way to access those LAPIC registers. X2APIC expects to
access all LAPIC registers using MSR (base with 0x800).

The correct flow to enable X2APIC on MTL would be as follows:
1. Let BSP bring all APs in XAPIC mode.

[INFO ]  LAPIC 0x10 in XAPIC mode.
...
[DEBUG]  Attempting to start 3 APs
[DEBUG]  Waiting for 10ms after sending INIT.
[DEBUG]  Waiting for SIPI to complete...
[DEBUG]  done.
[DEBUG]  Waiting for SIPI to complete...
[DEBUG]  done.
[INFO ]  LAPIC 0x11 in XAPIC mode.
[INFO ]  LAPIC 0x0 in XAPIC mode.
[INFO ]  LAPIC 0x80 in XAPIC mode.

2. Call enable_x2apic() function on all CPUs (BSP and APs)

And at the end of #2 above, all cores will now switch to X2APIC
from XAPIC.

[INFO ]  Initializing CPU #0
[DEBUG]  CPU: vendor Intel device a06a0
[DEBUG]  Clearing out pending MCEs
[INFO ]  LAPIC 0x10 switched to X2APIC mode.
...
[INFO ]  CPU #0 initialized
[INFO ]  Initializing CPU #1
[DEBUG]  CPU: vendor Intel device a06a0
[DEBUG]  Clearing out pending MCEs
[INFO ]  LAPIC 0x11 switched to X2APIC mode.

Note: Intel MTL FSP also follow the same steps for x2APIC enablement
while coreboot selects USE_INTEL_FSP_MP_INIT config instead
MP_SERVICES_PPI_V2.

BUG=b:219061518, b:219053812
TEST=Able to perform coreboot doing AP init with
DEFAULT_X2APIC_LATE_WORKAROUND config enabled without running into
any hang issue.

Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ie9c8fad6c46b15b5b08c9cc4ef53f2a6872bd0ea
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65741
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

0 files changed, 0 insertions, 0 deletions