soc/intel/broadwell: Move PCH code into pch subdir

Change-Id: Icb57eb89b4f225298e43ae27970dc1e27fb6e222
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46706
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>

1 files changed, 0 insertions, 295 deletions

diff --git a/src/soc/intel/broadwell/serialio.c b/src/soc/intel/broadwell/serialio.c
deleted file mode 100644
index d32a27ddca..0000000000
--- a/src/soc/intel/broadwell/serialio.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <device/mmio.h>
-#include <device/pci_ops.h>
-#include <acpi/acpi_gnvs.h>
-#include <console/console.h>
-#include <device/device.h>
-#include <device/pci.h>
-#include <device/pci_ids.h>
-#include <soc/iobp.h>
-#include <soc/nvs.h>
-#include <soc/pci_devs.h>
-#include <soc/pch.h>
-#include <soc/ramstage.h>
-#include <soc/rcba.h>
-#include <soc/serialio.h>
-#include <soc/intel/broadwell/pch/chip.h>
-
-/* Set D3Hot Power State in ACPI mode */
-static void serialio_enable_d3hot(struct resource *res)
-{
-	u32 reg32 = read32(res2mmio(res, PCH_PCS, 0));
-	reg32 |= PCH_PCS_PS_D3HOT;
-	write32(res2mmio(res, PCH_PCS, 0), reg32);
-}
-
-static int serialio_uart_is_debug(struct device *dev)
-{
-#if CONFIG(INTEL_PCH_UART_CONSOLE)
-	switch (dev->path.pci.devfn) {
-	case PCH_DEVFN_UART0: /* UART0 */
-		return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 0);
-	case PCH_DEVFN_UART1: /* UART1 */
-		return !!(CONFIG_INTEL_PCH_UART_CONSOLE_NUMBER == 1);
-	}
-#endif
-	return 0;
-}
-
-/* Enable clock in PCI mode */
-static void serialio_enable_clock(struct resource *bar0)
-{
-	u32 reg32 = read32(res2mmio(bar0, SIO_REG_PPR_CLOCK, 0));
-	reg32 |= SIO_REG_PPR_CLOCK_EN;
-	write32(res2mmio(bar0, SIO_REG_PPR_CLOCK, 0), reg32);
-}
-
-/* Put Serial IO D21:F0-F6 device into desired mode. */
-static void serialio_d21_mode(int sio_index, int int_pin, int acpi_mode)
-{
-	u32 portctrl = SIO_IOBP_PORTCTRL_PM_CAP_PRSNT;
-
-	/* Snoop select 1. */
-	portctrl |= SIO_IOBP_PORTCTRL_SNOOP_SELECT(1);
-
-	/* Set interrupt pin. */
-	portctrl |= SIO_IOBP_PORTCTRL_INT_PIN(int_pin);
-
-	if (acpi_mode) {
-		/* Enable ACPI interrupt mode. */
-		portctrl |= SIO_IOBP_PORTCTRL_ACPI_IRQ_EN;
-
-		/* Disable PCI config space. */
-		portctrl |= SIO_IOBP_PORTCTRL_PCI_CONF_DIS;
-	}
-
-	pch_iobp_update(SIO_IOBP_PORTCTRLX(sio_index), 0, portctrl);
-}
-
-/* Put Serial IO D23:F0 device into desired mode. */
-static void serialio_d23_mode(int acpi_mode)
-{
-	u32 portctrl = 0;
-
-	/* Snoop select 1. */
-	pch_iobp_update(SIO_IOBP_PORTCTRL1, 0,
-			SIO_IOBP_PORTCTRL1_SNOOP_SELECT(1));
-
-	if (acpi_mode) {
-		/* Enable ACPI interrupt mode. */
-		portctrl |= SIO_IOBP_PORTCTRL0_ACPI_IRQ_EN;
-
-		/* Disable PCI config space. */
-		portctrl |= SIO_IOBP_PORTCTRL0_PCI_CONF_DIS;
-	}
-
-	pch_iobp_update(SIO_IOBP_PORTCTRL0, 0, portctrl);
-}
-
-/* Enable LTR Auto Mode for D21:F1-F6. */
-static void serialio_d21_ltr(struct resource *bar0)
-{
-	u32 reg;
-
-	/* 1. Program BAR0 + 808h[2] = 0b */
-	reg = read32(res2mmio(bar0, SIO_REG_PPR_GEN, 0));
-	reg &= ~SIO_REG_PPR_GEN_LTR_MODE_MASK;
-	write32(res2mmio(bar0, SIO_REG_PPR_GEN, 0), reg);
-
-	/* 2. Program BAR0 + 804h[1:0] = 00b */
-	reg = read32(res2mmio(bar0, SIO_REG_PPR_RST, 0));
-	reg &= ~SIO_REG_PPR_RST_ASSERT;
-	write32(res2mmio(bar0, SIO_REG_PPR_RST, 0), reg);
-
-	/* 3. Program BAR0 + 804h[1:0] = 11b */
-	reg = read32(res2mmio(bar0, SIO_REG_PPR_RST, 0));
-	reg |= SIO_REG_PPR_RST_ASSERT;
-	write32(res2mmio(bar0, SIO_REG_PPR_RST, 0), reg);
-
-	/* 4. Program BAR0 + 814h[31:0] = 00000000h */
-	write32(res2mmio(bar0, SIO_REG_AUTO_LTR, 0), 0);
-}
-
-/* Enable LTR Auto Mode for D23:F0. */
-static void serialio_d23_ltr(struct resource *bar0)
-{
-	u32 reg;
-
-	/* Program BAR0 + 1008h[2] = 1b */
-	reg = read32(res2mmio(bar0, SIO_REG_SDIO_PPR_GEN, 0));
-	reg |= SIO_REG_PPR_GEN_LTR_MODE_MASK;
-	write32(res2mmio(bar0, SIO_REG_SDIO_PPR_GEN, 0), reg);
-
-	/* Program BAR0 + 1010h = 0x00000000 */
-	write32(res2mmio(bar0, SIO_REG_SDIO_PPR_SW_LTR, 0), 0);
-
-	/* Program BAR0 + 3Ch[30] = 1b */
-	reg = read32(res2mmio(bar0, SIO_REG_SDIO_PPR_CMD12, 0));
-	reg |= SIO_REG_SDIO_PPR_CMD12_B30;
-	write32(res2mmio(bar0, SIO_REG_SDIO_PPR_CMD12, 0), reg);
-}
-
-/* Select I2C voltage of 1.8V or 3.3V. */
-static void serialio_i2c_voltage_sel(struct resource *bar0, u8 voltage)
-{
-	u32 reg32 = read32(res2mmio(bar0, SIO_REG_PPR_GEN, 0));
-	reg32 &= ~SIO_REG_PPR_GEN_VOLTAGE_MASK;
-	reg32 |= SIO_REG_PPR_GEN_VOLTAGE(voltage);
-	write32(res2mmio(bar0, SIO_REG_PPR_GEN, 0), reg32);
-}
-
-/* Init sequence to be run once, done as part of D21:F0 (SDMA) init. */
-static void serialio_init_once(int acpi_mode)
-{
-	if (acpi_mode) {
-		/* Enable ACPI IRQ for IRQ13, IRQ7, IRQ6, IRQ5 in RCBA. */
-		RCBA32_OR(ACPIIRQEN, (1 << 13)|(1 << 7)|(1 << 6)|(1 << 5));
-	}
-
-	/* Program IOBP CB000154h[12,9:8,4:0] = 1001100011111b. */
-	pch_iobp_update(SIO_IOBP_GPIODF, ~0x0000131f, 0x0000131f);
-
-	/* Program IOBP CB000180h[5:0] = 111111b (undefined register) */
-	pch_iobp_update(0xcb000180, ~0x0000003f, 0x0000003f);
-}
-
-static void serialio_init(struct device *dev)
-{
-	const struct soc_intel_broadwell_pch_config *config = config_of(dev);
-	struct resource *bar0, *bar1;
-	int sio_index = -1;
-
-	printk(BIOS_DEBUG, "Initializing Serial IO device\n");
-
-	/* Ensure memory and bus master are enabled */
-	pci_or_config16(dev, PCI_COMMAND, PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY);
-
-	/* Find BAR0 and BAR1 */
-	bar0 = find_resource(dev, PCI_BASE_ADDRESS_0);
-	if (!bar0)
-		return;
-	bar1 = find_resource(dev, PCI_BASE_ADDRESS_1);
-	if (!bar1)
-		return;
-
-	if (!config->sio_acpi_mode)
-		serialio_enable_clock(bar0);
-
-	switch (dev->path.pci.devfn) {
-	case PCH_DEVFN_SDMA: /* SDMA */
-		sio_index = SIO_ID_SDMA;
-		serialio_init_once(config->sio_acpi_mode);
-		serialio_d21_mode(sio_index, SIO_PIN_INTB,
-				  config->sio_acpi_mode);
-		break;
-	case PCH_DEVFN_I2C0: /* I2C0 */
-		sio_index = SIO_ID_I2C0;
-		serialio_d21_ltr(bar0);
-		serialio_i2c_voltage_sel(bar0, config->sio_i2c0_voltage);
-		serialio_d21_mode(sio_index, SIO_PIN_INTC,
-				  config->sio_acpi_mode);
-		break;
-	case PCH_DEVFN_I2C1: /* I2C1 */
-		sio_index = SIO_ID_I2C1;
-		serialio_d21_ltr(bar0);
-		serialio_i2c_voltage_sel(bar0, config->sio_i2c1_voltage);
-		serialio_d21_mode(sio_index, SIO_PIN_INTC,
-				  config->sio_acpi_mode);
-		break;
-	case PCH_DEVFN_SPI0: /* SPI0 */
-		sio_index = SIO_ID_SPI0;
-		serialio_d21_ltr(bar0);
-		serialio_d21_mode(sio_index, SIO_PIN_INTC,
-				  config->sio_acpi_mode);
-		break;
-	case PCH_DEVFN_SPI1: /* SPI1 */
-		sio_index = SIO_ID_SPI1;
-		serialio_d21_ltr(bar0);
-		serialio_d21_mode(sio_index, SIO_PIN_INTC,
-				  config->sio_acpi_mode);
-		break;
-	case PCH_DEVFN_UART0: /* UART0 */
-		sio_index = SIO_ID_UART0;
-		if (!serialio_uart_is_debug(dev))
-			serialio_d21_ltr(bar0);
-		serialio_d21_mode(sio_index, SIO_PIN_INTD,
-				  config->sio_acpi_mode);
-		break;
-	case PCH_DEVFN_UART1: /* UART1 */
-		sio_index = SIO_ID_UART1;
-		if (!serialio_uart_is_debug(dev))
-			serialio_d21_ltr(bar0);
-		serialio_d21_mode(sio_index, SIO_PIN_INTD,
-				  config->sio_acpi_mode);
-		break;
-	case PCH_DEVFN_SDIO: /* SDIO */
-		sio_index = SIO_ID_SDIO;
-		serialio_d23_ltr(bar0);
-		serialio_d23_mode(config->sio_acpi_mode);
-		break;
-	default:
-		return;
-	}
-
-	if (config->sio_acpi_mode) {
-		struct global_nvs *gnvs;
-
-		/* Find ACPI NVS to update BARs */
-		gnvs = acpi_get_gnvs();
-		if (!gnvs)
-			return;
-
-		/* Save BAR0 and BAR1 to ACPI NVS */
-		gnvs->dev.bar0[sio_index] = (u32)bar0->base;
-		gnvs->dev.bar1[sio_index] = (u32)bar1->base;
-
-		/* Do not enable UART if it is used as debug port */
-		if (!serialio_uart_is_debug(dev))
-			gnvs->dev.enable[sio_index] = 1;
-
-		/* Put device in D3hot state via BAR1 */
-		if (dev->path.pci.devfn != PCH_DEVFN_SDMA)
-			serialio_enable_d3hot(bar1); /* all but SDMA */
-	}
-}
-
-static void serialio_set_resources(struct device *dev)
-{
-	pci_dev_set_resources(dev);
-
-#if CONFIG(INTEL_PCH_UART_CONSOLE)
-	/* Update UART base address if used for debug */
-	if (serialio_uart_is_debug(dev)) {
-		struct resource *res = find_resource(dev, PCI_BASE_ADDRESS_0);
-		if (res)
-			uartmem_setbaseaddr(res->base);
-	}
-#endif
-}
-
-static struct device_operations device_ops = {
-	.read_resources		= &pci_dev_read_resources,
-	.set_resources		= &serialio_set_resources,
-	.enable_resources	= &pci_dev_enable_resources,
-	.init			= &serialio_init,
-	.ops_pci		= &pci_dev_ops_pci,
-};
-
-static const unsigned short pci_device_ids[] = {
-	0x9c60, 0x9ce0, /* 0:15.0 - SDMA */
-	0x9c61, 0x9ce1, /* 0:15.1 - I2C0 */
-	0x9c62, 0x9ce2, /* 0:15.2 - I2C1 */
-	0x9c65, 0x9ce5, /* 0:15.3 - SPI0 */
-	0x9c66, 0x9ce6, /* 0:15.4 - SPI1 */
-	0x9c63, 0x9ce3, /* 0:15.5 - UART0 */
-	0x9c64, 0x9ce4, /* 0:15.6 - UART1 */
-	0x9c35, 0x9cb5, /* 0:17.0 - SDIO */
-	0
-};
-
-static const struct pci_driver pch_pcie __pci_driver = {
-	.ops	 = &device_ops,
-	.vendor	 = PCI_VENDOR_ID_INTEL,
-	.devices = pci_device_ids,
-};