soc/intel/alderlake/ramstage: Do initial SoC commit till ramstage

List of changes:
1. Add required SoC programming till ramstage
2. Include only required headers into include/soc
3. Add CPU, PCH and SA EDS document number and chapter number
4. Fill required FSP-S UPD to call FSP-S API

Change-Id: I3394f585d66b14ece67cde9e45ffa1177406f35f
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45759
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>

1 files changed, 219 insertions, 0 deletions

diff --git a/src/soc/intel/alderlake/cpu.c b/src/soc/intel/alderlake/cpu.c
new file mode 100644
index 0000000000..ee8051d568
--- /dev/null
+++ b/src/soc/intel/alderlake/cpu.c
@@ -0,0 +1,219 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * This file is created based on Intel Alder Lake Processor CPU Datasheet
+ * Document number: 619501
+ * Chapter number: 14
+ */
+
+#include <arch/cpu.h>
+#include <console/console.h>
+#include <device/pci.h>
+#include <cpu/x86/lapic.h>
+#include <cpu/x86/mp.h>
+#include <cpu/x86/msr.h>
+#include <cpu/intel/smm_reloc.h>
+#include <cpu/intel/turbo.h>
+#include <fsp/api.h>
+#include <intelblocks/cpulib.h>
+#include <intelblocks/mp_init.h>
+#include <intelblocks/msr.h>
+#include <romstage_handoff.h>
+#include <soc/cpu.h>
+#include <soc/msr.h>
+#include <soc/pci_devs.h>
+#include <soc/pm.h>
+#include <soc/soc_chip.h>
+
+static void soc_fsp_load(void)
+{
+	fsps_load(romstage_handoff_is_resume());
+}
+
+static void configure_isst(void)
+{
+	config_t *conf = config_of_soc();
+	msr_t msr;
+
+	if (conf->speed_shift_enable) {
+		/*
+		 * Kernel driver checks CPUID.06h:EAX[Bit 7] to determine if HWP
+		 * is supported or not. coreboot needs to configure MSR 0x1AA
+		 * which is then reflected in the CPUID register.
+		 */
+		msr = rdmsr(MSR_MISC_PWR_MGMT);
+		msr.lo |= MISC_PWR_MGMT_ISST_EN; /* Enable Speed Shift */
+		msr.lo |= MISC_PWR_MGMT_ISST_EN_INT; /* Enable Interrupt */
+		msr.lo |= MISC_PWR_MGMT_ISST_EN_EPP; /* Enable EPP */
+		wrmsr(MSR_MISC_PWR_MGMT, msr);
+	} else {
+		msr = rdmsr(MSR_MISC_PWR_MGMT);
+		msr.lo &= ~MISC_PWR_MGMT_ISST_EN; /* Disable Speed Shift */
+		msr.lo &= ~MISC_PWR_MGMT_ISST_EN_INT; /* Disable Interrupt */
+		msr.lo &= ~MISC_PWR_MGMT_ISST_EN_EPP; /* Disable EPP */
+		wrmsr(MSR_MISC_PWR_MGMT, msr);
+	}
+}
+
+static void configure_misc(void)
+{
+	msr_t msr;
+
+	config_t *conf = config_of_soc();
+
+	msr = rdmsr(IA32_MISC_ENABLE);
+	msr.lo |= (1 << 0);	/* Fast String enable */
+	msr.lo |= (1 << 3);	/* TM1/TM2/EMTTM enable */
+	wrmsr(IA32_MISC_ENABLE, msr);
+
+	/* Set EIST status */
+	cpu_set_eist(conf->eist_enable);
+
+	/* Disable Thermal interrupts */
+	msr.lo = 0;
+	msr.hi = 0;
+	wrmsr(IA32_THERM_INTERRUPT, msr);
+
+	/* Enable package critical interrupt only */
+	msr.lo = 1 << 4;
+	msr.hi = 0;
+	wrmsr(IA32_PACKAGE_THERM_INTERRUPT, msr);
+
+	/* Enable PROCHOT */
+	msr = rdmsr(MSR_POWER_CTL);
+	msr.lo |= (1 << 0);	/* Enable Bi-directional PROCHOT as an input*/
+	msr.lo |= (1 << 23);	/* Lock it */
+	wrmsr(MSR_POWER_CTL, msr);
+}
+
+static void enable_lapic_tpr(void)
+{
+	msr_t msr;
+
+	msr = rdmsr(MSR_PIC_MSG_CONTROL);
+	msr.lo &= ~(1 << 10);	/* Enable APIC TPR updates */
+	wrmsr(MSR_PIC_MSG_CONTROL, msr);
+}
+
+static void configure_dca_cap(void)
+{
+	uint32_t feature_flag;
+	msr_t msr;
+
+	/* Check feature flag in CPUID.(EAX=1):ECX[18]==1 */
+	feature_flag = cpu_get_feature_flags_ecx();
+	if (feature_flag & CPUID_DCA) {
+		msr = rdmsr(IA32_PLATFORM_DCA_CAP);
+		msr.lo |= 1;
+		wrmsr(IA32_PLATFORM_DCA_CAP, msr);
+	}
+}
+
+static void enable_pm_timer_emulation(void)
+{
+	/* ACPI PM timer emulation */
+	msr_t msr;
+	/*
+	 * The derived frequency is calculated as follows:
+	 * (CTC_FREQ * msr[63:32]) >> 32 = target frequency.
+	 * Back solve the multiplier so the 3.579545MHz ACPI timer
+	 * frequency is used.
+	 */
+	msr.hi = (3579545ULL << 32) / CTC_FREQ;
+	/* Set PM1 timer IO port and enable */
+	msr.lo = (EMULATE_DELAY_VALUE << EMULATE_DELAY_OFFSET_VALUE) |
+			EMULATE_PM_TMR_EN | (ACPI_BASE_ADDRESS + PM1_TMR);
+	wrmsr(MSR_EMULATE_PM_TIMER, msr);
+}
+
+static void set_energy_perf_bias(u8 policy)
+{
+	msr_t msr;
+	int ecx;
+
+	/* Determine if energy efficient policy is supported. */
+	ecx = cpuid_ecx(0x6);
+	if (!(ecx & (1 << 3)))
+		return;
+
+	/* Energy Policy is bits 3:0 */
+	msr = rdmsr(IA32_ENERGY_PERF_BIAS);
+	msr.lo &= ~0xf;
+	msr.lo |= policy & 0xf;
+	wrmsr(IA32_ENERGY_PERF_BIAS, msr);
+}
+
+/* All CPUs including BSP will run the following function. */
+void soc_core_init(struct device *cpu)
+{
+	/* Clear out pending MCEs */
+	/* TODO(adurbin): This should only be done on a cold boot. Also, some
+	 * of these banks are core vs package scope. For now every CPU clears
+	 * every bank. */
+	mca_configure();
+
+	/* Enable the local CPU apics */
+	enable_lapic_tpr();
+	setup_lapic();
+
+	/* Configure Enhanced SpeedStep and Thermal Sensors */
+	configure_misc();
+
+	/* Configure Intel Speed Shift */
+	configure_isst();
+
+	/* Enable PM timer emulation */
+	enable_pm_timer_emulation();
+
+	/* Enable Direct Cache Access */
+	configure_dca_cap();
+
+	/* Set energy policy */
+	set_energy_perf_bias(ENERGY_POLICY_NORMAL);
+
+	/* Enable Turbo */
+	enable_turbo();
+}
+
+static void per_cpu_smm_trigger(void)
+{
+	/* Relocate the SMM handler. */
+	smm_relocate();
+}
+
+static void post_mp_init(void)
+{
+	/* Set Max Ratio */
+	cpu_set_max_ratio();
+
+	/*
+	 * Now that all APs have been relocated as well as the BSP let SMIs
+	 * start flowing.
+	 */
+	global_smi_enable();
+}
+
+static const struct mp_ops mp_ops = {
+	/*
+	 * Skip Pre MP init MTRR programming as MTRRs are mirrored from BSP,
+	 * that are set prior to ramstage.
+	 * Real MTRRs programming are being done after resource allocation.
+	 */
+	.pre_mp_init = soc_fsp_load,
+	.get_cpu_count = get_cpu_count,
+	.get_smm_info = smm_info,
+	.get_microcode_info = get_microcode_info,
+	.pre_mp_smm_init = smm_initialize,
+	.per_cpu_smm_trigger = per_cpu_smm_trigger,
+	.relocation_handler = smm_relocation_handler,
+	.post_mp_init = post_mp_init,
+};
+
+void soc_init_cpus(struct bus *cpu_bus)
+{
+	if (mp_init_with_smm(cpu_bus, &mp_ops))
+		printk(BIOS_ERR, "MP initialization failure.\n");
+
+	/* Thermal throttle activation offset */
+	configure_tcc_thermal_target();
+}