amd/stoneyridge: Transfer functions from early_setup.c to southbridge.c

In preparation to deleting early_setup,c, transfer all functions except
those related to wide IO to southbridge.c.

BUG=b:64033893
TEST=Build and boot to OS.

Change-Id: Ibe1d87cb3e0eb3e8ed4d2dc2adbddf2e13557c9e
Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-on: https://review.coreboot.org/22568
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>

1 files changed, 247 insertions, 0 deletions

diff --git a/src/soc/amd/stoneyridge/southbridge.c b/src/soc/amd/stoneyridge/southbridge.c
index 600b064f2d..dbf27bc6b8 100644
--- a/src/soc/amd/stoneyridge/southbridge.c
+++ b/src/soc/amd/stoneyridge/southbridge.c
@@ -28,7 +28,254 @@
 #include <soc/southbridge.h>
 #include <soc/smi.h>
 #include <fchec.h>
+#include <delay.h>
+#include <soc/pci_devs.h>
 
+void configure_stoneyridge_uart(void)
+{
+	u8 byte, byte2;
+
+	if (CONFIG_UART_FOR_CONSOLE < 0 || CONFIG_UART_FOR_CONSOLE > 1)
+		return;
+
+	/* Power on the UART and AMBA devices */
+	byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56
+					+ CONFIG_UART_FOR_CONSOLE * 2);
+	byte |= AOAC_PWR_ON_DEV;
+	write8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG56
+					+ CONFIG_UART_FOR_CONSOLE * 2, byte);
+
+	byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62);
+	byte |= AOAC_PWR_ON_DEV;
+	write8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG62, byte);
+
+	/* Set the GPIO mux to UART */
+	write8((void *)FCH_IOMUXx89_UART0_RTS_L_EGPIO137, 0);
+	write8((void *)FCH_IOMUXx8A_UART0_TXD_EGPIO138, 0);
+	write8((void *)FCH_IOMUXx8E_UART1_RTS_L_EGPIO142, 0);
+	write8((void *)FCH_IOMUXx8F_UART1_TXD_EGPIO143, 0);
+
+	/* Wait for the UART and AMBA devices to indicate power and clock OK */
+	do {
+		udelay(100);
+		byte = read8((void *)ACPI_MMIO_BASE + AOAC_BASE + FCH_AOAC_REG57
+					+ CONFIG_UART_FOR_CONSOLE * 2);
+		byte &= (A0AC_PWR_RST_STATE | AOAC_RST_CLK_OK_STATE);
+		byte2 = read8((void *)ACPI_MMIO_BASE + AOAC_BASE
+					+ FCH_AOAC_REG63);
+		byte2 &= (A0AC_PWR_RST_STATE | AOAC_RST_CLK_OK_STATE);
+	} while (!((byte == (A0AC_PWR_RST_STATE | AOAC_RST_CLK_OK_STATE)) &&
+		   (byte2 == (A0AC_PWR_RST_STATE | AOAC_RST_CLK_OK_STATE))));
+
+}
+
+void sb_pci_port80(void)
+{
+	u8 byte;
+
+	byte = pci_read_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH);
+	byte &= ~DECODE_IO_PORT_ENABLE4_H; /* disable lpc port 80 */
+	pci_write_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH, byte);
+}
+
+void sb_lpc_port80(void)
+{
+	u8 byte;
+
+	/* Enable LPC controller */
+	outb(PM_LPC_GATING, PM_INDEX);
+	byte = inb(PM_DATA);
+	byte |= PM_LPC_ENABLE;
+	outb(PM_LPC_GATING, PM_INDEX);
+	outb(byte, PM_DATA);
+
+	/* Enable port 80 LPC decode in pci function 3 configuration space. */
+	byte = pci_read_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH);
+	byte |= DECODE_IO_PORT_ENABLE4_H; /* enable port 80 */
+	pci_write_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DEC_EN_HIGH, byte);
+}
+
+void sb_lpc_decode(void)
+{
+	u32 tmp = 0;
+
+	/* Enable I/O decode to LPC bus */
+	tmp = DECODE_ENABLE_PARALLEL_PORT0 | DECODE_ENABLE_PARALLEL_PORT2
+		| DECODE_ENABLE_PARALLEL_PORT4 | DECODE_ENABLE_SERIAL_PORT0
+		| DECODE_ENABLE_SERIAL_PORT1 | DECODE_ENABLE_SERIAL_PORT2
+		| DECODE_ENABLE_SERIAL_PORT3 | DECODE_ENABLE_SERIAL_PORT4
+		| DECODE_ENABLE_SERIAL_PORT5 | DECODE_ENABLE_SERIAL_PORT6
+		| DECODE_ENABLE_SERIAL_PORT7 | DECODE_ENABLE_AUDIO_PORT0
+		| DECODE_ENABLE_AUDIO_PORT1 | DECODE_ENABLE_AUDIO_PORT2
+		| DECODE_ENABLE_AUDIO_PORT3 | DECODE_ENABLE_MSS_PORT2
+		| DECODE_ENABLE_MSS_PORT3 | DECODE_ENABLE_FDC_PORT0
+		| DECODE_ENABLE_FDC_PORT1 | DECODE_ENABLE_GAME_PORT
+		| DECODE_ENABLE_KBC_PORT | DECODE_ENABLE_ACPIUC_PORT
+		| DECODE_ENABLE_ADLIB_PORT;
+
+	pci_write_config32(SOC_LPC_DEV, LPC_IO_PORT_DECODE_ENABLE, tmp);
+}
+
+void sb_clk_output_48Mhz(void)
+{
+	u32 ctrl;
+
+	/*
+	 * Enable the X14M_25M_48M_OSC pin and leaving it at it's default so
+	 * 48Mhz will be on ball AP13 (FT3b package)
+	 */
+	ctrl = read32((void *)(ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40));
+
+	/* clear the OSCOUT1_ClkOutputEnb to enable the 48 Mhz clock */
+	ctrl &= ~FCH_MISC_REG40_OSCOUT1_EN;
+	write32((void *)(ACPI_MMIO_BASE + MISC_BASE + FCH_MISC_REG40), ctrl);
+}
+
+static uintptr_t sb_spibase(void)
+{
+	u32 base, enables;
+
+	/* Make sure the base address is predictable */
+	base = pci_read_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER);
+	enables = base & 0xf;
+	base &= ~0x3f;
+
+	if (!base) {
+		base = SPI_BASE_ADDRESS;
+		pci_write_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER,
+					base | enables | SPI_ROM_ENABLE);
+		/* PCI_COMMAND_MEMORY is read-only and enabled. */
+	}
+	return (uintptr_t)base;
+}
+
+void sb_set_spi100(u16 norm, u16 fast, u16 alt, u16 tpm)
+{
+	uintptr_t base = sb_spibase();
+	write16((void *)base + SPI100_SPEED_CONFIG,
+				(norm << SPI_NORM_SPEED_NEW_SH) |
+				(fast << SPI_FAST_SPEED_NEW_SH) |
+				(alt << SPI_ALT_SPEED_NEW_SH) |
+				(tpm << SPI_TPM_SPEED_NEW_SH));
+	write16((void *)base + SPI100_ENABLE, SPI_USE_SPI100);
+}
+
+void sb_disable_4dw_burst(void)
+{
+	uintptr_t base = sb_spibase();
+	write16((void *)base + SPI100_HOST_PREF_CONFIG,
+			read16((void *)base + SPI100_HOST_PREF_CONFIG)
+					& ~SPI_RD4DW_EN_HOST);
+}
+
+void sb_set_readspeed(u16 norm, u16 fast)
+{
+	uintptr_t base = sb_spibase();
+	write16((void *)base + SPI_CNTRL1, (read16((void *)base + SPI_CNTRL1)
+					& ~SPI_CNTRL1_SPEED_MASK)
+					| (norm << SPI_NORM_SPEED_SH)
+					| (fast << SPI_FAST_SPEED_SH));
+}
+
+void sb_read_mode(u32 mode)
+{
+	uintptr_t base = sb_spibase();
+	write32((void *)base + SPI_CNTRL0,
+			(read32((void *)base + SPI_CNTRL0)
+					& ~SPI_READ_MODE_MASK) | mode);
+}
+
+void sb_tpm_decode_spi(void)
+{
+	u32 spibase = pci_read_config32(SOC_LPC_DEV,
+					SPIROM_BASE_ADDRESS_REGISTER);
+	pci_write_config32(SOC_LPC_DEV, SPIROM_BASE_ADDRESS_REGISTER, spibase
+					| ROUTE_TPM_2_SPI);
+}
+
+/*
+ * Enable 4MB (LPC) ROM access at 0xFFC00000 - 0xFFFFFFFF.
+ *
+ * Hardware should enable LPC ROM by pin straps. This function does not
+ * handle the theoretically possible PCI ROM, FWH, or SPI ROM configurations.
+ *
+ * The southbridge power-on default is to map 512K ROM space.
+ *
+ */
+void sb_enable_rom(void)
+{
+	u8 reg8;
+
+	/*
+	 * Decode variable LPC ROM address ranges 1 and 2.
+	 * Bits 3-4 are not defined in any publicly available datasheet
+	 */
+	reg8 = pci_read_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DECODE_ENABLE);
+	reg8 |= (1 << 3) | (1 << 4);
+	pci_write_config8(SOC_LPC_DEV, LPC_IO_OR_MEM_DECODE_ENABLE, reg8);
+
+	/*
+	 * LPC ROM address range 1:
+	 * Enable LPC ROM range mirroring start at 0x000e(0000).
+	 */
+	pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE1_START, 0x000e);
+
+	/* Enable LPC ROM range mirroring end at 0x000f(ffff). */
+	pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE1_END, 0x000f);
+
+	/*
+	 * LPC ROM address range 2:
+	 *
+	 * Enable LPC ROM range start at:
+	 * 0xfff8(0000): 512KB
+	 * 0xfff0(0000): 1MB
+	 * 0xffe0(0000): 2MB
+	 * 0xffc0(0000): 4MB
+	 */
+	pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE2_START, 0x10000
+					- (CONFIG_COREBOOT_ROMSIZE_KB >> 6));
+
+	/* Enable LPC ROM range end at 0xffff(ffff). */
+	pci_write_config16(SOC_LPC_DEV, ROM_ADDRESS_RANGE2_END, 0xffff);
+}
+
+void bootblock_fch_early_init(void)
+{
+	sb_enable_rom();
+	sb_lpc_port80();
+	sb_lpc_decode();
+}
+
+int s3_save_nvram_early(u32 dword, int size, int  nvram_pos)
+{
+	int i;
+	printk(BIOS_DEBUG, "Writing %x of size %d to nvram pos: %d\n",
+					dword, size, nvram_pos);
+
+	for (i = 0; i < size; i++) {
+		outb(nvram_pos, BIOSRAM_INDEX);
+		outb((dword >> (8 * i)) & 0xff, BIOSRAM_DATA);
+		nvram_pos++;
+	}
+
+	return nvram_pos;
+}
+
+int s3_load_nvram_early(int size, u32 *old_dword, int nvram_pos)
+{
+	u32 data = *old_dword;
+	int i;
+	for (i = 0; i < size; i++) {
+		outb(nvram_pos, BIOSRAM_INDEX);
+		data &= ~(0xff << (i * 8));
+		data |= inb(BIOSRAM_DATA) << (i * 8);
+		nvram_pos++;
+	}
+	*old_dword = data;
+	printk(BIOS_DEBUG, "Loading %x of size %d to nvram pos:%d\n",
+					*old_dword, size, nvram_pos-size);
+	return nvram_pos;
+}
 
 int acpi_get_sleep_type(void)
 {