soc/amd/picasso: split southbridge into bootblock and ramstage code

The ramstage parts gets renamed to fch.c and the bootblock one to
early_fch.c. No functionality from the old southbridge file is used in
romstage, so don't link it there.

Change-Id: I7ca3b5238c3b841191dd0459996b691edd76fbf8
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>

1 files changed, 267 insertions, 0 deletions

diff --git a/src/soc/amd/picasso/fch.c b/src/soc/amd/picasso/fch.c
new file mode 100644
index 0000000000..895a379c86
--- /dev/null
+++ b/src/soc/amd/picasso/fch.c
@@ -0,0 +1,267 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#include <console/console.h>
+#include <device/mmio.h>
+#include <bootstate.h>
+#include <cpu/amd/msr.h>
+#include <cpu/x86/smm.h>
+#include <cpu/x86/msr.h>
+#include <device/device.h>
+#include <device/pci.h>
+#include <device/pci_ops.h>
+#include <cbmem.h>
+#include <acpi/acpi_gnvs.h>
+#include <amdblocks/amd_pci_util.h>
+#include <amdblocks/reset.h>
+#include <amdblocks/acpimmio.h>
+#include <amdblocks/acpi.h>
+#include <amdblocks/smi.h>
+#include <soc/acpi.h>
+#include <soc/cpu.h>
+#include <soc/i2c.h>
+#include <soc/southbridge.h>
+#include <soc/smi.h>
+#include <soc/amd_pci_int_defs.h>
+#include <soc/pci_devs.h>
+#include <soc/nvs.h>
+#include <types.h>
+#include "chip.h"
+
+/*
+ * Table of APIC register index and associated IRQ name. Using IDX_XXX_NAME
+ * provides a visible association with the index, therefore helping
+ * maintainability of table. If a new index/name is defined in
+ * amd_pci_int_defs.h, just add the pair at the end of this table.
+ * Order is not important.
+ */
+const static struct irq_idx_name irq_association[] = {
+	{ PIRQ_A,	"INTA#" },
+	{ PIRQ_B,	"INTB#" },
+	{ PIRQ_C,	"INTC#" },
+	{ PIRQ_D,	"INTD#" },
+	{ PIRQ_E,	"INTE#" },
+	{ PIRQ_F,	"INTF#/GENINT2" },
+	{ PIRQ_G,	"INTG#" },
+	{ PIRQ_H,	"INTH#" },
+	{ PIRQ_MISC,	"Misc" },
+	{ PIRQ_MISC0,	"Misc0" },
+	{ PIRQ_MISC1,	"Misc1" },
+	{ PIRQ_MISC2,	"Misc2" },
+	{ PIRQ_SIRQA,	"Ser IRQ INTA" },
+	{ PIRQ_SIRQB,	"Ser IRQ INTB" },
+	{ PIRQ_SIRQC,	"Ser IRQ INTC" },
+	{ PIRQ_SIRQD,	"Ser IRQ INTD" },
+	{ PIRQ_SCI,	"SCI" },
+	{ PIRQ_SMBUS,	"SMBUS" },
+	{ PIRQ_ASF,	"ASF" },
+	{ PIRQ_PMON,	"PerMon" },
+	{ PIRQ_SD,	"SD" },
+	{ PIRQ_SDIO,	"SDIO" },
+	{ PIRQ_CIR,	"CIR" },
+	{ PIRQ_GPIOA,	"GPIOa" },
+	{ PIRQ_GPIOB,	"GPIOb" },
+	{ PIRQ_GPIOC,	"GPIOc" },
+	{ PIRQ_SATA,	"SATA" },
+	{ PIRQ_EMMC,	"eMMC" },
+	{ PIRQ_GPP0,	"GPP0" },
+	{ PIRQ_GPP1,	"GPP1" },
+	{ PIRQ_GPP2,	"GPP2" },
+	{ PIRQ_GPP3,	"GPP3" },
+	{ PIRQ_GPIO,	"GPIO" },
+	{ PIRQ_I2C0,	"I2C0" },
+	{ PIRQ_I2C1,	"I2C1" },
+	{ PIRQ_I2C2,	"I2C2" },
+	{ PIRQ_I2C3,	"I2C3" },
+	{ PIRQ_UART0,	"UART0" },
+	{ PIRQ_UART1,	"UART1" },
+	{ PIRQ_I2C4,	"I2C4" },
+	{ PIRQ_I2C5,	"I2C5" },
+	{ PIRQ_UART2,	"UART2" },
+	{ PIRQ_UART3,	"UART3" },
+};
+
+const struct irq_idx_name *sb_get_apic_reg_association(size_t *size)
+{
+	*size = ARRAY_SIZE(irq_association);
+	return irq_association;
+}
+
+void sb_clk_output_48Mhz(void)
+{
+	u32 ctrl;
+
+	ctrl = misc_read32(MISC_CLK_CNTL1);
+	ctrl |= BP_X48M0_OUTPUT_EN;
+	misc_write32(MISC_CLK_CNTL1, ctrl);
+}
+
+void sb_enable(struct device *dev)
+{
+	printk(BIOS_DEBUG, "%s\n", __func__);
+}
+
+static void sb_init_acpi_ports(void)
+{
+	u32 reg;
+
+	/* We use some of these ports in SMM regardless of whether or not
+	 * ACPI tables are generated. Enable these ports indiscriminately.
+	 */
+
+	pm_write16(PM_EVT_BLK, ACPI_PM_EVT_BLK);
+	pm_write16(PM1_CNT_BLK, ACPI_PM1_CNT_BLK);
+	pm_write16(PM_TMR_BLK, ACPI_PM_TMR_BLK);
+	pm_write16(PM_GPE0_BLK, ACPI_GPE0_BLK);
+
+	if (CONFIG(HAVE_SMI_HANDLER)) {
+		/* APMC - SMI Command Port */
+		pm_write16(PM_ACPI_SMI_CMD, APM_CNT);
+		configure_smi(SMITYPE_SMI_CMD_PORT, SMI_MODE_SMI);
+
+		/* SMI on SlpTyp requires sending SMI before completion
+		 * response of the I/O write.  The BKDG also specifies
+		 * clearing ForceStpClkRetry for SMI trapping.
+		 */
+		reg = pm_read32(PM_PCI_CTRL);
+		reg |= FORCE_SLPSTATE_RETRY;
+		pm_write32(PM_PCI_CTRL, reg);
+
+		/* Disable SlpTyp feature */
+		reg = pm_read8(PM_RST_CTRL1);
+		reg &= ~SLPTYPE_CONTROL_EN;
+		pm_write8(PM_RST_CTRL1, reg);
+
+		configure_smi(SMITYPE_SLP_TYP, SMI_MODE_SMI);
+	} else {
+		pm_write16(PM_ACPI_SMI_CMD, 0);
+	}
+
+	/* Decode ACPI registers and enable standard features */
+	pm_write8(PM_ACPI_CONF, PM_ACPI_DECODE_STD |
+				PM_ACPI_GLOBAL_EN |
+				PM_ACPI_RTC_EN_EN |
+				PM_ACPI_TIMER_EN_EN);
+}
+
+static void set_nvs_sws(void *unused)
+{
+	struct chipset_state *state;
+	struct global_nvs *gnvs;
+
+	state = cbmem_find(CBMEM_ID_POWER_STATE);
+	if (state == NULL)
+		return;
+	gnvs = acpi_get_gnvs();
+	if (gnvs == NULL)
+		return;
+
+	acpi_fill_gnvs(gnvs, &state->gpe_state);
+}
+
+BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, set_nvs_sws, NULL);
+
+/*
+ * A-Link to AHB bridge, part of the AMBA fabric. These are internal clocks
+ * and unneeded for Raven/Picasso so gate them to save power.
+ */
+static void al2ahb_clock_gate(void)
+{
+	uint8_t al2ahb_val;
+	uintptr_t al2ahb_base = ALINK_AHB_ADDRESS;
+
+	al2ahb_val = read8((void *)(al2ahb_base + AL2AHB_CONTROL_CLK_OFFSET));
+	al2ahb_val |= AL2AHB_CLK_GATE_EN;
+	write8((void *)(al2ahb_base + AL2AHB_CONTROL_CLK_OFFSET), al2ahb_val);
+	al2ahb_val = read8((void *)(al2ahb_base + AL2AHB_CONTROL_HCLK_OFFSET));
+	al2ahb_val |= AL2AHB_HCLK_GATE_EN;
+	write8((void *)(al2ahb_base + AL2AHB_CONTROL_HCLK_OFFSET), al2ahb_val);
+}
+
+/* configure the genral purpose PCIe clock outputs according to the devicetree settings */
+static void gpp_clk_setup(void)
+{
+	const struct soc_amd_picasso_config *cfg = config_of_soc();
+
+	/* look-up table to be able to iterate over the PCIe clock output settings */
+	const uint8_t gpp_clk_shift_lut[GPP_CLK_OUTPUT_COUNT] = {
+		GPP_CLK0_REQ_SHIFT,
+		GPP_CLK1_REQ_SHIFT,
+		GPP_CLK2_REQ_SHIFT,
+		GPP_CLK3_REQ_SHIFT,
+		GPP_CLK4_REQ_SHIFT,
+		GPP_CLK5_REQ_SHIFT,
+		GPP_CLK6_REQ_SHIFT,
+	};
+
+	uint32_t gpp_clk_ctl = misc_read32(GPP_CLK_CNTRL);
+
+	for (int i = 0; i < GPP_CLK_OUTPUT_COUNT; i++) {
+		gpp_clk_ctl &= ~GPP_CLK_REQ_MASK(gpp_clk_shift_lut[i]);
+		/*
+		 * The remapping of values is done so that the default of the enum used for the
+		 * devicetree settings is the clock being enabled, so that a missing devicetree
+		 * configuration for this will result in an always active clock and not an
+		 * inactive PCIe clock output.
+		 */
+		switch (cfg->gpp_clk_config[i]) {
+		case GPP_CLK_REQ:
+			gpp_clk_ctl |= GPP_CLK_REQ_EXT(gpp_clk_shift_lut[i]);
+			break;
+		case GPP_CLK_OFF:
+			gpp_clk_ctl |= GPP_CLK_REQ_OFF(gpp_clk_shift_lut[i]);
+			break;
+		case GPP_CLK_ON:
+		default:
+			gpp_clk_ctl |= GPP_CLK_REQ_ON(gpp_clk_shift_lut[i]);
+		}
+	}
+
+	misc_write32(GPP_CLK_CNTRL, gpp_clk_ctl);
+}
+
+void southbridge_init(void *chip_info)
+{
+	struct chipset_state *state;
+
+	i2c_soc_init();
+	sb_init_acpi_ports();
+
+	state = cbmem_find(CBMEM_ID_POWER_STATE);
+	if (state) {
+		acpi_pm_gpe_add_events_print_events(&state->gpe_state);
+		gpio_add_events(&state->gpio_state);
+	}
+	acpi_clear_pm_gpe_status();
+
+	al2ahb_clock_gate();
+
+	gpp_clk_setup();
+}
+
+void southbridge_final(void *chip_info)
+{
+	uint8_t restored_power = PM_S5_AT_POWER_RECOVERY;
+
+	if (CONFIG(MAINBOARD_POWER_RESTORE))
+		restored_power = PM_RESTORE_S0_IF_PREV_S0;
+	pm_write8(PM_RTC_SHADOW, restored_power);
+}
+
+/*
+ * Update the PCI devices with a valid IRQ number
+ * that is set in the mainboard PCI_IRQ structures.
+ */
+static void set_pci_irqs(void *unused)
+{
+	/* Write PCI_INTR regs 0xC00/0xC01 */
+	write_pci_int_table();
+
+	/* Write IRQs for all devicetree enabled devices */
+	write_pci_cfg_irqs();
+}
+
+/*
+ * Hook this function into the PCI state machine
+ * on entry into BS_DEV_ENABLE.
+ */
+BOOT_STATE_INIT_ENTRY(BS_DEV_ENABLE, BS_ON_ENTRY, set_pci_irqs, NULL);