soc/amd/picasso: Separate GPIO define into gpio_defs.h

Separate GPIO define into gpio_defs.h, then we can use it in asl include.

Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com>
Change-Id: If2a779eae228f621e77610889205853de2fb179a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49216
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>

2 files changed, 249 insertions, 239 deletions

diff --git a/src/soc/amd/common/block/include/amdblocks/gpio_banks.h b/src/soc/amd/common/block/include/amdblocks/gpio_banks.h
index b6162d7e7f..6524d05a54 100644
--- a/src/soc/amd/common/block/include/amdblocks/gpio_banks.h
+++ b/src/soc/amd/common/block/include/amdblocks/gpio_banks.h
@@ -4,6 +4,7 @@
 #define AMD_BLOCK_GPIO_BANKS_H
 
 #include <types.h>
+#include "gpio_defs.h"
 
 struct soc_amd_gpio {
 	uint8_t gpio;
@@ -17,13 +18,6 @@ struct soc_amd_event {
 	uint8_t event;
 };
 
-#define GPIO_MASTER_SWITCH	0xFC
-#define   GPIO_MASK_STS_EN	BIT(28)
-#define   GPIO_INTERRUPT_EN	BIT(30)
-#define   GPIO_WAKE_EN		BIT(31)
-
-#define GPIO_WAKE_STAT_0	0x2F0
-#define GPIO_WAKE_STAT_1	0x2F4
 struct gpio_wake_state {
 	uint32_t control_switch;
 	uint32_t wake_stat[2];
@@ -38,59 +32,6 @@ void gpio_fill_wake_state(struct gpio_wake_state *state);
 /* Add gpio events to the eventlog. */
 void gpio_add_events(const struct gpio_wake_state *state);
 
-#define GPIO_PIN_IN		(1 << 0)	/* for byte access */
-#define GPIO_PIN_OUT		(1 << 6)	/* for byte access */
-
-/* Pad trigger type - Level or Edge */
-#define GPIO_TRIGGER_EDGE	(0 << 8)
-#define GPIO_TRIGGER_LEVEL	(1 << 8)
-#define GPIO_TRIGGER_MASK	(1 << 8)
-
-/*
- * Pad polarity:
- * Level trigger - High or Low
- * Edge trigger - High (Rising), Low (Falling), Both
- */
-#define GPIO_ACTIVE_HIGH	(0 << 9)
-#define GPIO_ACTIVE_LOW		(1 << 9)
-#define GPIO_ACTIVE_BOTH	(2 << 9)
-#define GPIO_ACTIVE_MASK	(3 << 9)
-
-/*
- * Pad trigger and polarity configuration.
- * This determines the filtering applied on the input signal at the pad.
- */
-#define GPIO_TRIGGER_EDGE_HIGH		(GPIO_ACTIVE_HIGH | GPIO_TRIGGER_EDGE)
-#define GPIO_TRIGGER_EDGE_LOW		(GPIO_ACTIVE_LOW | GPIO_TRIGGER_EDGE)
-#define GPIO_TRIGGER_BOTH_EDGES		(GPIO_ACTIVE_BOTH | GPIO_TRIGGER_EDGE)
-#define GPIO_TRIGGER_LEVEL_HIGH		(GPIO_ACTIVE_HIGH | GPIO_TRIGGER_LEVEL)
-#define GPIO_TRIGGER_LEVEL_LOW		(GPIO_ACTIVE_LOW | GPIO_TRIGGER_LEVEL)
-
-#define GPIO_INT_ENABLE_STATUS		(1 << 11)
-#define GPIO_INT_ENABLE_DELIVERY	(1 << 12)
-#define GPIO_INT_ENABLE_STATUS_DELIVERY	\
-				(GPIO_INT_ENABLE_STATUS | GPIO_INT_ENABLE_DELIVERY)
-#define GPIO_INT_ENABLE_MASK		(3 << 11)
-
-#define GPIO_S0I3_WAKE_EN	(1 << 13)
-#define GPIO_S3_WAKE_EN		(1 << 14)
-#define GPIO_S4_S5_WAKE_EN	(1 << 15)
-
-#define GPIO_PIN_STS		(1 << 16)
-#define GPIO_8KPULLUP_SELECT	(1 << 19)
-#define GPIO_PULLUP_ENABLE	(1 << 20)
-#define GPIO_PULLDOWN_ENABLE	(1 << 21)
-#define GPIO_PULL_MASK		(7 << 19)
-
-#define GPIO_OUTPUT_SHIFT	22
-#define GPIO_OUTPUT_VALUE	(1 << GPIO_OUTPUT_SHIFT)
-#define GPIO_OUTPUT_ENABLE	(1 << 23)
-#define GPIO_OUTPUT_MASK	(3 << GPIO_OUTPUT_SHIFT)
-
-#define GPIO_INT_STATUS		(1 << 28)
-#define GPIO_WAKE_STATUS	(1 << 29)
-#define GPIO_STATUS_MASK	(3 << 28)
-
 enum {
 	GEVENT_0,
 	GEVENT_1,
@@ -126,39 +67,6 @@ enum {
 	GEVENT_31,
 };
 
-#define GPIO_OUTPUT_OUT_HIGH (GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE)
-#define GPIO_OUTPUT_OUT_LOW GPIO_OUTPUT_ENABLE
-
-#define GPIO_PULL_PULL_UP_8K (GPIO_PULLUP_ENABLE | GPIO_8KPULLUP_SELECT)
-#define GPIO_PULL_PULL_UP GPIO_PULLUP_ENABLE
-#define GPIO_PULL_PULL_DOWN GPIO_PULLDOWN_ENABLE
-#define GPIO_PULL_PULL_NONE 0
-
-#define AMD_GPIO_MUX_MASK			0x03
-
-/*
- * Flags used for GPIO configuration. These provide additional information that does not go
- * directly into GPIO control register. These are stored in `flags` field in soc_amd_gpio.
- */
-#define GPIO_FLAG_EVENT_TRIGGER_LEVEL	(1 << 0)
-#define GPIO_FLAG_EVENT_TRIGGER_EDGE	(0 << 0)
-#define GPIO_FLAG_EVENT_TRIGGER_MASK	(1 << 0)
-#define GPIO_FLAG_EVENT_ACTIVE_HIGH	(1 << 1)
-#define GPIO_FLAG_EVENT_ACTIVE_LOW	(0 << 1)
-#define GPIO_FLAG_EVENT_ACTIVE_MASK	(1 << 1)
-#define GPIO_FLAG_SCI			(1 << 2)
-#define GPIO_FLAG_SMI			(1 << 3)
-
-/* Trigger configuration for GPIO SCI/SMI events. */
-#define GPIO_FLAG_EVENT_TRIGGER_LEVEL_HIGH	(GPIO_FLAG_EVENT_TRIGGER_LEVEL | \
-						 GPIO_FLAG_EVENT_ACTIVE_HIGH)
-#define GPIO_FLAG_EVENT_TRIGGER_LEVEL_LOW	(GPIO_FLAG_EVENT_TRIGGER_LEVEL | \
-						 GPIO_FLAG_EVENT_ACTIVE_LOW)
-#define GPIO_FLAG_EVENT_TRIGGER_EDGE_HIGH	(GPIO_FLAG_EVENT_TRIGGER_EDGE | \
-						 GPIO_FLAG_EVENT_ACTIVE_HIGH)
-#define GPIO_FLAG_EVENT_TRIGGER_EDGE_LOW	(GPIO_FLAG_EVENT_TRIGGER_EDGE | \
-						 GPIO_FLAG_EVENT_ACTIVE_LOW)
-
 static inline bool is_gpio_event_level_triggered(uint32_t flags)
 {
 	return (flags & GPIO_FLAG_EVENT_TRIGGER_MASK) == GPIO_FLAG_EVENT_TRIGGER_LEVEL;
@@ -179,152 +87,6 @@ static inline bool is_gpio_event_active_low(uint32_t flags)
 	return (flags & GPIO_FLAG_EVENT_ACTIVE_MASK) == GPIO_FLAG_EVENT_ACTIVE_LOW;
 }
 
-#define DEB_GLITCH_SHIFT		5
-#define DEB_GLITCH_LOW			1
-#define DEB_GLITCH_HIGH			2
-#define DEB_GLITCH_NONE			3
-#define GPIO_DEB_PRESERVE_LOW_GLITCH	(DEB_GLITCH_LOW << DEB_GLITCH_SHIFT)
-#define GPIO_DEB_PRESERVE_HIGH_GLITCH	(DEB_GLITCH_HIGH << DEB_GLITCH_SHIFT)
-#define GPIO_DEB_REMOVE_GLITCH		(DEB_GLITCH_NONE << DEB_GLITCH_SHIFT)
-
-#define GPIO_TIMEBASE_61uS		0
-#define GPIO_TIMEBASE_183uS		(1 << 4)
-#define GPIO_TIMEBASE_15560uS		(1 << 7)
-#define GPIO_TIMEBASE_62440uS		(GPIO_TIMEBASE_183uS | \
-					GPIO_TIMEBASE_15560uS)
-#define GPIO_DEB_DEBOUNCE_DISABLED	(0 | GPIO_TIMEBASE_61uS)
-#define GPIO_DEB_60uS			(1 | GPIO_TIMEBASE_61uS)
-#define GPIO_DEB_120uS			(2 | GPIO_TIMEBASE_61uS)
-#define GPIO_DEB_200uS			(3 | GPIO_TIMEBASE_61uS)
-#define GPIO_DEB_500uS			(8 | GPIO_TIMEBASE_61uS)
-#define GPIO_DEB_1mS			(5 | GPIO_TIMEBASE_183uS)
-#define GPIO_DEB_2mS			(11 | GPIO_TIMEBASE_183uS)
-#define GPIO_DEB_15mS			(1 | GPIO_TIMEBASE_15560uS)
-#define GPIO_DEB_50mS			(3 | GPIO_TIMEBASE_15560uS)
-#define GPIO_DEB_100mS			(6 | GPIO_TIMEBASE_15560uS)
-#define GPIO_DEB_200mS			(13 | GPIO_TIMEBASE_15560uS)
-#define GPIO_DEB_500mS			(8 | GPIO_TIMEBASE_62440uS)
-
-#define GPIO_DEB_MASK			0xff
-
-#define GPIO_WAKE_S0i3			(1 << 13)
-#define GPIO_WAKE_S3			(1 << 14)
-#define GPIO_WAKE_S4_S5			(1 << 15)
-#define GPIO_WAKE_S0i3_S4_S5		(GPIO_WAKE_S0i3 | GPIO_WAKE_S4_S5)
-#define GPIO_WAKE_S3_S4_S5		(GPIO_WAKE_S3 | GPIO_WAKE_S4_S5)
-#define GPIO_WAKE_MASK			(7 << 13)
-
-/*
- * Mask used to reset bits in GPIO control register when configuring pad using `program_gpios()`
- * Bits that are preserved/untouched:
- * - Reserved bits
- * - Drive strength bits
- * - Read only bits
- */
-#define PAD_CFG_MASK		(GPIO_DEB_MASK | GPIO_TRIGGER_MASK | GPIO_ACTIVE_MASK | \
-				 GPIO_INT_ENABLE_MASK | GPIO_WAKE_MASK | GPIO_PULL_MASK | \
-				 GPIO_OUTPUT_MASK | GPIO_STATUS_MASK)
-
-/*
- * Several macros are available to declare programming of GPIO pins. The defined macros and
- * their parameters are:
- * PAD_NF		Define native alternate function for the pin.
- *	pin		the pin to be programmed
- *	function	the native function
- *	pull		pull up, pull down or no pull
- * PAD_GPI		The pin is a GPIO input
- *	pin		the pin to be programmed
- *	pull		pull up, pull down or no pull
- * PAD_GPO		The pin is a GPIO output
- *	pin		the pin to be programmed
- *	direction	high or low
- * PAD_INT		The pin is regular interrupt that works while booting
- *	pin		the pin to be programmed
- *	pull		pull up, pull down or no pull
- *	trigger		LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH, BOTH_EDGES
- *	action		STATUS, DELIVER, STATUS_DELIVER
- * PAD_SCI		The pin is a SCI source
- *	pin		the pin to be programmed
- *	pull		pull up, pull down or no pull
- *	event trigger		LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH
- * PAD_SMI		The pin is a SMI source
- *	pin		the pin to be programmed
- *	pull		pull up, pull down or no pull
- *	event trigger		LEVEL_LOW, LEVEL_HIGH
- * PAD_WAKE		The pin can wake, use after PAD_INT or PAD_SCI
- *	pin		the pin to be programmed
- *	pull		pull up, pull down or no pull
- *	trigger		LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH, BOTH_EDGES
- *	type		S0i3, S3, S4_S5 or S4_S5 combinations (S0i3_S3 invalid)
- * PAD_DEBOUNCE		The input or interrupt will be debounced
- *	pin		the pin to be programmed
- *	pull		pull up, pull down or no pull
- *	debounce_type	preserve low glitch, preserve high glitch, no glitch
- *	debounce_time	the debounce time
- */
-
-#define PAD_CFG_STRUCT_FLAGS(__pin, __function, __control, __flags)	\
-	{								\
-		.gpio = __pin,						\
-		.function = __function,					\
-		.control = __control,					\
-		.flags = __flags,					\
-	}
-
-#define PAD_CFG_STRUCT(__pin, __function, __control)	\
-	PAD_CFG_STRUCT_FLAGS(__pin, __function, __control, 0)
-
-#define PAD_PULL(__pull)		GPIO_PULL_ ## __pull
-#define PAD_OUTPUT(__dir)		GPIO_OUTPUT_OUT_ ## __dir
-#define PAD_TRIGGER(__trig)		GPIO_TRIGGER_ ## __trig
-#define PAD_INT_ENABLE(__action)	GPIO_INT_ENABLE_ ## __action
-#define PAD_FLAG_EVENT_TRIGGER(__trig)	GPIO_FLAG_EVENT_TRIGGER_ ## __trig
-#define PAD_WAKE_ENABLE(__wake)		GPIO_WAKE_ ## __wake
-#define PAD_DEBOUNCE_CONFIG(__deb)	GPIO_DEB_ ## __deb
-
-/* Native function pad configuration */
-#define PAD_NF(pin, func, pull)						\
-	PAD_CFG_STRUCT(pin, pin ## _IOMUX_ ## func, PAD_PULL(pull))
-
-/* General purpose input pad configuration */
-#define PAD_GPI(pin, pull)							\
-	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_PULL(pull))
-
-/* General purpose output pad configuration */
-#define PAD_GPO(pin, direction)			\
-	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_OUTPUT(direction))
-
-/* Legacy interrupt pad configuration */
-#define PAD_INT(pin, pull, trigger, action)				\
-	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx,			\
-		PAD_PULL(pull) | PAD_TRIGGER(trigger) | PAD_INT_ENABLE(action))
-
-/* SCI pad configuration */
-#define PAD_SCI(pin, pull, trigger)					\
-	PAD_CFG_STRUCT_FLAGS(pin, pin ## _IOMUX_GPIOxx,		\
-		PAD_PULL(pull) | PAD_TRIGGER(LEVEL_HIGH),		\
-		PAD_FLAG_EVENT_TRIGGER(trigger) | GPIO_FLAG_SCI)
-
-/* SMI pad configuration */
-#define PAD_SMI(pin, pull, trigger)					\
-	PAD_CFG_STRUCT_FLAGS(pin, pin ## _IOMUX_GPIOxx,		\
-		PAD_PULL(pull) | PAD_TRIGGER(LEVEL_HIGH),		\
-		PAD_FLAG_EVENT_TRIGGER(trigger) | GPIO_FLAG_SMI)
-
-/* WAKE pad configuration */
-#define PAD_WAKE(pin, pull, trigger, type)				\
-	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx,			\
-		PAD_PULL(pull) | PAD_TRIGGER(trigger) | PAD_WAKE_ENABLE(type))
-
-/* pin debounce configuration */
-#define PAD_DEBOUNCE(pin, pull, type, time)				\
-	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx,			\
-		PAD_PULL(pull) | PAD_DEBOUNCE_CONFIG(type) | PAD_DEBOUNCE_CONFIG(time))
-
-/* No-connect pad - configured as input with PULL_DOWN */
-#define PAD_NC(pin)							\
-	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_PULL(PULL_DOWN))
-
 typedef uint32_t gpio_t;
 
 /*
diff --git a/src/soc/amd/common/block/include/amdblocks/gpio_defs.h b/src/soc/amd/common/block/include/amdblocks/gpio_defs.h
new file mode 100644
index 0000000000..f0c6f660d0
--- /dev/null
+++ b/src/soc/amd/common/block/include/amdblocks/gpio_defs.h
@@ -0,0 +1,248 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef AMD_BLOCK_GPIO_DEFS_H
+#define AMD_BLOCK_GPIO_DEFS_H
+
+#define GPIO_MASTER_SWITCH	0xFC
+#define   GPIO_MASK_STS_EN	BIT(28)
+#define   GPIO_INTERRUPT_EN	BIT(30)
+#define   GPIO_WAKE_EN		BIT(31)
+
+#define GPIO_WAKE_STAT_0	0x2F0
+#define GPIO_WAKE_STAT_1	0x2F4
+
+#define GPIO_PIN_IN		(1 << 0)	/* for byte access */
+#define GPIO_PIN_OUT		(1 << 6)	/* for byte access */
+
+/* Pad trigger type - Level or Edge */
+#define GPIO_TRIGGER_EDGE	(0 << 8)
+#define GPIO_TRIGGER_LEVEL	(1 << 8)
+#define GPIO_TRIGGER_MASK	(1 << 8)
+
+/*
+ * Pad polarity:
+ * Level trigger - High or Low
+ * Edge trigger - High (Rising), Low (Falling), Both
+ */
+#define GPIO_ACTIVE_HIGH	(0 << 9)
+#define GPIO_ACTIVE_LOW		(1 << 9)
+#define GPIO_ACTIVE_BOTH	(2 << 9)
+#define GPIO_ACTIVE_MASK	(3 << 9)
+
+/*
+ * Pad trigger and polarity configuration.
+ * This determines the filtering applied on the input signal at the pad.
+ */
+#define GPIO_TRIGGER_EDGE_HIGH		(GPIO_ACTIVE_HIGH | GPIO_TRIGGER_EDGE)
+#define GPIO_TRIGGER_EDGE_LOW		(GPIO_ACTIVE_LOW | GPIO_TRIGGER_EDGE)
+#define GPIO_TRIGGER_BOTH_EDGES		(GPIO_ACTIVE_BOTH | GPIO_TRIGGER_EDGE)
+#define GPIO_TRIGGER_LEVEL_HIGH		(GPIO_ACTIVE_HIGH | GPIO_TRIGGER_LEVEL)
+#define GPIO_TRIGGER_LEVEL_LOW		(GPIO_ACTIVE_LOW | GPIO_TRIGGER_LEVEL)
+
+#define GPIO_INT_ENABLE_STATUS		(1 << 11)
+#define GPIO_INT_ENABLE_DELIVERY	(1 << 12)
+#define GPIO_INT_ENABLE_STATUS_DELIVERY	\
+				(GPIO_INT_ENABLE_STATUS | GPIO_INT_ENABLE_DELIVERY)
+#define GPIO_INT_ENABLE_MASK		(3 << 11)
+
+#define GPIO_S0I3_WAKE_EN	(1 << 13)
+#define GPIO_S3_WAKE_EN		(1 << 14)
+#define GPIO_S4_S5_WAKE_EN	(1 << 15)
+
+#define GPIO_PIN_STS		(1 << 16)
+#define GPIO_8KPULLUP_SELECT	(1 << 19)
+#define GPIO_PULLUP_ENABLE	(1 << 20)
+#define GPIO_PULLDOWN_ENABLE	(1 << 21)
+#define GPIO_PULL_MASK		(7 << 19)
+
+#define GPIO_INPUT_SHIFT	16
+#define GPIO_INPUT_VALUE	(1 << GPIO_INPUT_SHIFT)
+
+#define GPIO_OUTPUT_SHIFT	22
+#define GPIO_OUTPUT_VALUE	(1 << GPIO_OUTPUT_SHIFT)
+#define GPIO_OUTPUT_ENABLE	(1 << 23)
+#define GPIO_OUTPUT_MASK	(3 << GPIO_OUTPUT_SHIFT)
+
+#define GPIO_INT_STATUS		(1 << 28)
+#define GPIO_WAKE_STATUS	(1 << 29)
+#define GPIO_STATUS_MASK	(3 << 28)
+
+#define GPIO_OUTPUT_OUT_HIGH (GPIO_OUTPUT_ENABLE | GPIO_OUTPUT_VALUE)
+#define GPIO_OUTPUT_OUT_LOW GPIO_OUTPUT_ENABLE
+
+#define GPIO_PULL_PULL_UP_8K (GPIO_PULLUP_ENABLE | GPIO_8KPULLUP_SELECT)
+#define GPIO_PULL_PULL_UP GPIO_PULLUP_ENABLE
+#define GPIO_PULL_PULL_DOWN GPIO_PULLDOWN_ENABLE
+#define GPIO_PULL_PULL_NONE 0
+
+#define AMD_GPIO_MUX_MASK			0x03
+
+/*
+ * Flags used for GPIO configuration. These provide additional information that does not go
+ * directly into GPIO control register. These are stored in `flags` field in soc_amd_gpio.
+ */
+#define GPIO_FLAG_EVENT_TRIGGER_LEVEL	(1 << 0)
+#define GPIO_FLAG_EVENT_TRIGGER_EDGE	(0 << 0)
+#define GPIO_FLAG_EVENT_TRIGGER_MASK	(1 << 0)
+#define GPIO_FLAG_EVENT_ACTIVE_HIGH	(1 << 1)
+#define GPIO_FLAG_EVENT_ACTIVE_LOW	(0 << 1)
+#define GPIO_FLAG_EVENT_ACTIVE_MASK	(1 << 1)
+#define GPIO_FLAG_SCI			(1 << 2)
+#define GPIO_FLAG_SMI			(1 << 3)
+
+/* Trigger configuration for GPIO SCI/SMI events. */
+#define GPIO_FLAG_EVENT_TRIGGER_LEVEL_HIGH	(GPIO_FLAG_EVENT_TRIGGER_LEVEL | \
+						 GPIO_FLAG_EVENT_ACTIVE_HIGH)
+#define GPIO_FLAG_EVENT_TRIGGER_LEVEL_LOW	(GPIO_FLAG_EVENT_TRIGGER_LEVEL | \
+						 GPIO_FLAG_EVENT_ACTIVE_LOW)
+#define GPIO_FLAG_EVENT_TRIGGER_EDGE_HIGH	(GPIO_FLAG_EVENT_TRIGGER_EDGE | \
+						 GPIO_FLAG_EVENT_ACTIVE_HIGH)
+#define GPIO_FLAG_EVENT_TRIGGER_EDGE_LOW	(GPIO_FLAG_EVENT_TRIGGER_EDGE | \
+						 GPIO_FLAG_EVENT_ACTIVE_LOW)
+#define DEB_GLITCH_SHIFT		5
+#define DEB_GLITCH_LOW			1
+#define DEB_GLITCH_HIGH			2
+#define DEB_GLITCH_NONE			3
+#define GPIO_DEB_PRESERVE_LOW_GLITCH	(DEB_GLITCH_LOW << DEB_GLITCH_SHIFT)
+#define GPIO_DEB_PRESERVE_HIGH_GLITCH	(DEB_GLITCH_HIGH << DEB_GLITCH_SHIFT)
+#define GPIO_DEB_REMOVE_GLITCH		(DEB_GLITCH_NONE << DEB_GLITCH_SHIFT)
+
+#define GPIO_TIMEBASE_61uS		0
+#define GPIO_TIMEBASE_183uS		(1 << 4)
+#define GPIO_TIMEBASE_15560uS		(1 << 7)
+#define GPIO_TIMEBASE_62440uS		(GPIO_TIMEBASE_183uS | \
+					GPIO_TIMEBASE_15560uS)
+#define GPIO_DEB_DEBOUNCE_DISABLED	(0 | GPIO_TIMEBASE_61uS)
+#define GPIO_DEB_60uS			(1 | GPIO_TIMEBASE_61uS)
+#define GPIO_DEB_120uS			(2 | GPIO_TIMEBASE_61uS)
+#define GPIO_DEB_200uS			(3 | GPIO_TIMEBASE_61uS)
+#define GPIO_DEB_500uS			(8 | GPIO_TIMEBASE_61uS)
+#define GPIO_DEB_1mS			(5 | GPIO_TIMEBASE_183uS)
+#define GPIO_DEB_2mS			(11 | GPIO_TIMEBASE_183uS)
+#define GPIO_DEB_15mS			(1 | GPIO_TIMEBASE_15560uS)
+#define GPIO_DEB_50mS			(3 | GPIO_TIMEBASE_15560uS)
+#define GPIO_DEB_100mS			(6 | GPIO_TIMEBASE_15560uS)
+#define GPIO_DEB_200mS			(13 | GPIO_TIMEBASE_15560uS)
+#define GPIO_DEB_500mS			(8 | GPIO_TIMEBASE_62440uS)
+
+#define GPIO_DEB_MASK			0xff
+
+#define GPIO_WAKE_S0i3			(1 << 13)
+#define GPIO_WAKE_S3			(1 << 14)
+#define GPIO_WAKE_S4_S5			(1 << 15)
+#define GPIO_WAKE_S0i3_S4_S5		(GPIO_WAKE_S0i3 | GPIO_WAKE_S4_S5)
+#define GPIO_WAKE_S3_S4_S5		(GPIO_WAKE_S3 | GPIO_WAKE_S4_S5)
+#define GPIO_WAKE_MASK			(7 << 13)
+
+/*
+ * Mask used to reset bits in GPIO control register when configuring pad using `program_gpios()`
+ * Bits that are preserved/untouched:
+ * - Reserved bits
+ * - Drive strength bits
+ * - Read only bits
+ */
+#define PAD_CFG_MASK		(GPIO_DEB_MASK | GPIO_TRIGGER_MASK | GPIO_ACTIVE_MASK | \
+				 GPIO_INT_ENABLE_MASK | GPIO_WAKE_MASK | GPIO_PULL_MASK | \
+				 GPIO_OUTPUT_MASK | GPIO_STATUS_MASK)
+
+/*
+ * Several macros are available to declare programming of GPIO pins. The defined macros and
+ * their parameters are:
+ * PAD_NF		Define native alternate function for the pin.
+ *	pin		the pin to be programmed
+ *	function	the native function
+ *	pull		pull up, pull down or no pull
+ * PAD_GPI		The pin is a GPIO input
+ *	pin		the pin to be programmed
+ *	pull		pull up, pull down or no pull
+ * PAD_GPO		The pin is a GPIO output
+ *	pin		the pin to be programmed
+ *	direction	high or low
+ * PAD_INT		The pin is regular interrupt that works while booting
+ *	pin		the pin to be programmed
+ *	pull		pull up, pull down or no pull
+ *	trigger		LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH, BOTH_EDGES
+ *	action		STATUS, DELIVER, STATUS_DELIVER
+ * PAD_SCI		The pin is a SCI source
+ *	pin		the pin to be programmed
+ *	pull		pull up, pull down or no pull
+ *	event trigger		LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH
+ * PAD_SMI		The pin is a SMI source
+ *	pin		the pin to be programmed
+ *	pull		pull up, pull down or no pull
+ *	event trigger		LEVEL_LOW, LEVEL_HIGH
+ * PAD_WAKE		The pin can wake, use after PAD_INT or PAD_SCI
+ *	pin		the pin to be programmed
+ *	pull		pull up, pull down or no pull
+ *	trigger		LEVEL_LOW, LEVEL_HIGH, EDGE_LOW, EDGE_HIGH, BOTH_EDGES
+ *	type		S0i3, S3, S4_S5 or S4_S5 combinations (S0i3_S3 invalid)
+ * PAD_DEBOUNCE		The input or interrupt will be debounced
+ *	pin		the pin to be programmed
+ *	pull		pull up, pull down or no pull
+ *	debounce_type	preserve low glitch, preserve high glitch, no glitch
+ *	debounce_time	the debounce time
+ */
+
+#define PAD_CFG_STRUCT_FLAGS(__pin, __function, __control, __flags)	\
+	{								\
+		.gpio = __pin,						\
+		.function = __function,					\
+		.control = __control,					\
+		.flags = __flags,					\
+	}
+
+#define PAD_CFG_STRUCT(__pin, __function, __control)	\
+	PAD_CFG_STRUCT_FLAGS(__pin, __function, __control, 0)
+
+#define PAD_PULL(__pull)		GPIO_PULL_ ## __pull
+#define PAD_OUTPUT(__dir)		GPIO_OUTPUT_OUT_ ## __dir
+#define PAD_TRIGGER(__trig)		GPIO_TRIGGER_ ## __trig
+#define PAD_INT_ENABLE(__action)	GPIO_INT_ENABLE_ ## __action
+#define PAD_FLAG_EVENT_TRIGGER(__trig)	GPIO_FLAG_EVENT_TRIGGER_ ## __trig
+#define PAD_WAKE_ENABLE(__wake)		GPIO_WAKE_ ## __wake
+#define PAD_DEBOUNCE_CONFIG(__deb)	GPIO_DEB_ ## __deb
+
+/* Native function pad configuration */
+#define PAD_NF(pin, func, pull)						\
+	PAD_CFG_STRUCT(pin, pin ## _IOMUX_ ## func, PAD_PULL(pull))
+
+/* General purpose input pad configuration */
+#define PAD_GPI(pin, pull)							\
+	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_PULL(pull))
+
+/* General purpose output pad configuration */
+#define PAD_GPO(pin, direction)			\
+	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_OUTPUT(direction))
+
+/* Legacy interrupt pad configuration */
+#define PAD_INT(pin, pull, trigger, action)				\
+	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx,			\
+		PAD_PULL(pull) | PAD_TRIGGER(trigger) | PAD_INT_ENABLE(action))
+
+/* SCI pad configuration */
+#define PAD_SCI(pin, pull, trigger)					\
+	PAD_CFG_STRUCT_FLAGS(pin, pin ## _IOMUX_GPIOxx,		\
+		PAD_PULL(pull) | PAD_TRIGGER(LEVEL_HIGH),		\
+		PAD_FLAG_EVENT_TRIGGER(trigger) | GPIO_FLAG_SCI)
+
+/* SMI pad configuration */
+#define PAD_SMI(pin, pull, trigger)					\
+	PAD_CFG_STRUCT_FLAGS(pin, pin ## _IOMUX_GPIOxx,		\
+		PAD_PULL(pull) | PAD_TRIGGER(LEVEL_HIGH),		\
+		PAD_FLAG_EVENT_TRIGGER(trigger) | GPIO_FLAG_SMI)
+
+/* WAKE pad configuration */
+#define PAD_WAKE(pin, pull, trigger, type)				\
+	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx,			\
+		PAD_PULL(pull) | PAD_TRIGGER(trigger) | PAD_WAKE_ENABLE(type))
+
+/* pin debounce configuration */
+#define PAD_DEBOUNCE(pin, pull, type, time)				\
+	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx,			\
+		PAD_PULL(pull) | PAD_DEBOUNCE_CONFIG(type) | PAD_DEBOUNCE_CONFIG(time))
+
+/* No-connect pad - configured as input with PULL_DOWN */
+#define PAD_NC(pin)							\
+	PAD_CFG_STRUCT(pin, pin ## _IOMUX_GPIOxx, PAD_PULL(PULL_DOWN))
+
+#endif /* AMD_BLOCK_GPIO_DEFS_H */