soc/amd: drop unneeded data_fabric_set_mmio_np

Drop the unneeded data_fabric_set_mmio_np function and the corresponding
SOC_AMD_COMMON_BLOCK_DATA_FABRIC_NP_REGION Kconfig symbol. In systems
with only one FCH, its MMIO region will be subtractively decoded and
there's no need to add a non-posted data fabric MMIO region after the
FSP/openSIL has already configured the data fabric decode windows. In
systems with more than one FCH, openSIL will already take care of
initializing everything for the additional FCH, so we also won't need to
do anything in that case. Since dropping this function also removes both
data_fabric_print_mmio_conf calls before and after adding the unneeded
non-posted MMIO region, replace the data_fabric_set_mmio_np call with a
data_fabric_print_mmio_conf call to still print the data fabric MMIO
decode regions set up by the FSP/openSIL.

TEST=Mandolin still boots successfully

Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I474b6e066060abb3fe5b78505521c7782cc192ee
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>

4 files changed, 0 insertions, 129 deletions

diff --git a/src/soc/amd/common/block/data_fabric/Kconfig b/src/soc/amd/common/block/data_fabric/Kconfig
index da35daecd8..add2374b18 100644
--- a/src/soc/amd/common/block/data_fabric/Kconfig
+++ b/src/soc/amd/common/block/data_fabric/Kconfig
@@ -4,14 +4,6 @@ config SOC_AMD_COMMON_BLOCK_DATA_FABRIC
 	  Select this option to add data fabric configuration related
 	  functionality to the build.
 
-config SOC_AMD_COMMON_BLOCK_DATA_FABRIC_NP_REGION
-	bool
-	depends on SOC_AMD_COMMON_BLOCK_DATA_FABRIC
-	help
-	  Select this option to include the code to make sure that there's a
-	  non-posted MMIO region configured in the data fabric registers that
-	  covers the FCH MMIO from the HPET up to right below the LAPIC.
-
 config SOC_AMD_COMMON_BLOCK_DATA_FABRIC_DOMAIN
 	bool
 	depends on SOC_AMD_COMMON_BLOCK_DATA_FABRIC
diff --git a/src/soc/amd/common/block/data_fabric/Makefile.mk b/src/soc/amd/common/block/data_fabric/Makefile.mk
index b0684f4e75..55a4d3f311 100644
--- a/src/soc/amd/common/block/data_fabric/Makefile.mk
+++ b/src/soc/amd/common/block/data_fabric/Makefile.mk
@@ -2,7 +2,6 @@
 
 ramstage-$(CONFIG_SOC_AMD_COMMON_BLOCK_DATA_FABRIC) += data_fabric_helper.c
 ramstage-$(CONFIG_SOC_AMD_COMMON_BLOCK_DATA_FABRIC_DOMAIN) += domain.c
-ramstage-$(CONFIG_SOC_AMD_COMMON_BLOCK_DATA_FABRIC_NP_REGION) += np_region.c
 
 ifeq ($(CONFIG_SOC_AMD_COMMON_BLOCK_DATA_FABRIC_MULTI_PCI_SEGMENT),y)
 ramstage-$(CONFIG_SOC_AMD_COMMON_BLOCK_DATA_FABRIC_DOMAIN) += pci_segment_multi.c
diff --git a/src/soc/amd/common/block/data_fabric/np_region.c b/src/soc/amd/common/block/data_fabric/np_region.c
deleted file mode 100644
index dd82e5ebcc..0000000000
--- a/src/soc/amd/common/block/data_fabric/np_region.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-
-#include <amdblocks/data_fabric.h>
-#include <arch/hpet.h>
-#include <console/console.h>
-#include <cpu/x86/lapic_def.h>
-#include <soc/data_fabric.h>
-#include <types.h>
-
-static void data_fabric_disable_mmio_reg(unsigned int reg)
-{
-	union df_mmio_control ctrl = { .dst_fabric_id = IOMS0_FABRIC_ID };
-	data_fabric_broadcast_write32(DF_MMIO_CONTROL(reg), ctrl.raw);
-	data_fabric_broadcast_write32(DF_MMIO_BASE(reg), 0);
-	data_fabric_broadcast_write32(DF_MMIO_LIMIT(reg), 0);
-}
-
-static bool is_mmio_reg_disabled(unsigned int reg)
-{
-	union df_mmio_control ctrl;
-	ctrl.raw = data_fabric_broadcast_read32(DF_MMIO_CONTROL(reg));
-	return !(ctrl.we || ctrl.re);
-}
-
-static int data_fabric_find_unused_mmio_reg(void)
-{
-	for (unsigned int i = 0; i < DF_MMIO_REG_SET_COUNT; i++) {
-		if (is_mmio_reg_disabled(i))
-			return i;
-	}
-	return -1;
-}
-
-void data_fabric_set_mmio_np(void)
-{
-	/*
-	 * Mark region from HPET-LAPIC or 0xfed00000-0xfee00000-1 as NP.
-	 *
-	 * AGESA has already programmed the NB MMIO routing, however nothing
-	 * is yet marked as non-posted.
-	 *
-	 * If there exists an overlapping routing base/limit pair, trim its
-	 * base or limit to avoid the new NP region.  If any pair exists
-	 * completely within HPET-LAPIC range, remove it.  If any pair surrounds
-	 * HPET-LAPIC, it must be split into two regions.
-	 *
-	 * TODO(b/156296146): Remove the settings from AGESA and allow coreboot
-	 * to own everything.  If not practical, consider erasing all settings
-	 * and have coreboot reprogram them.  At that time, make the source
-	 * below more flexible.
-	 *   * Note that the code relies on the granularity of the HPET and
-	 *     LAPIC addresses being sufficiently large that the shifted limits
-	 *     +/-1 are always equivalent to the non-shifted values +/-1.
-	 */
-
-	unsigned int i;
-	int reg;
-	uint32_t base, limit;
-	union df_mmio_control ctrl;
-	const uint32_t np_bot = HPET_BASE_ADDRESS >> DF_MMIO_SHIFT;
-	const uint32_t np_top = (LAPIC_DEFAULT_BASE - 1) >> DF_MMIO_SHIFT;
-
-	data_fabric_print_mmio_conf();
-
-	for (i = 0; i < DF_MMIO_REG_SET_COUNT; i++) {
-		/* Adjust all registers that overlap */
-		ctrl.raw = data_fabric_broadcast_read32(DF_MMIO_CONTROL(i));
-		if (!(ctrl.we || ctrl.re))
-			continue; /* not enabled */
-
-		base = data_fabric_broadcast_read32(DF_MMIO_BASE(i));
-		limit = data_fabric_broadcast_read32(DF_MMIO_LIMIT(i));
-
-		if (base > np_top || limit < np_bot)
-			continue; /* no overlap at all */
-
-		if (base >= np_bot && limit <= np_top) {
-			data_fabric_disable_mmio_reg(i); /* 100% within, so remove */
-			continue;
-		}
-
-		if (base < np_bot && limit > np_top) {
-			/* Split the configured region */
-			data_fabric_broadcast_write32(DF_MMIO_LIMIT(i), np_bot - 1);
-			reg = data_fabric_find_unused_mmio_reg();
-			if (reg < 0) {
-				/* Although a pair could be freed later, this condition is
-				 * very unusual and deserves analysis.  Flag an error and
-				 * leave the topmost part unconfigured. */
-				printk(BIOS_ERR, "Not enough NB MMIO routing registers\n");
-				continue;
-			}
-			data_fabric_broadcast_write32(DF_MMIO_BASE(reg), np_top + 1);
-			data_fabric_broadcast_write32(DF_MMIO_LIMIT(reg), limit);
-			data_fabric_broadcast_write32(DF_MMIO_CONTROL(reg), ctrl.raw);
-			continue;
-		}
-
-		/* If still here, adjust only the base or limit */
-		if (base <= np_bot)
-			data_fabric_broadcast_write32(DF_MMIO_LIMIT(i), np_bot - 1);
-		else
-			data_fabric_broadcast_write32(DF_MMIO_BASE(i), np_top + 1);
-	}
-
-	reg = data_fabric_find_unused_mmio_reg();
-	if (reg < 0) {
-		printk(BIOS_ERR, "cannot configure region as NP\n");
-		return;
-	}
-
-	union df_mmio_control np_ctrl = { .dst_fabric_id = IOMS0_FABRIC_ID,
-					  .np = 1, .we = 1, .re = 1 };
-	data_fabric_broadcast_write32(DF_MMIO_BASE(reg), np_bot);
-	data_fabric_broadcast_write32(DF_MMIO_LIMIT(reg), np_top);
-	data_fabric_broadcast_write32(DF_MMIO_CONTROL(reg), np_ctrl.raw);
-
-	data_fabric_print_mmio_conf();
-}
diff --git a/src/soc/amd/common/block/include/amdblocks/data_fabric.h b/src/soc/amd/common/block/include/amdblocks/data_fabric.h
index 9dbf5dac35..f0073dfb4e 100644
--- a/src/soc/amd/common/block/include/amdblocks/data_fabric.h
+++ b/src/soc/amd/common/block/include/amdblocks/data_fabric.h
@@ -44,7 +44,6 @@ void data_fabric_broadcast_write32(uint16_t fn_reg, uint32_t data)
 }
 
 void data_fabric_print_mmio_conf(void);
-void data_fabric_set_mmio_np(void);
 
 enum cb_err data_fabric_get_pci_bus_numbers(struct device *domain, uint8_t *segment_group,
 					    uint8_t *first_bus, uint8_t *last_bus);