summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
authorStefan Reinauer <stepan@openbios.org>2003-07-21 13:05:56 +0000
committerStefan Reinauer <stepan@openbios.org>2003-07-21 13:05:56 +0000
commit73a9cf4ccb58eccb4a1383088f7c86f325fdad7f (patch)
tree7617b4d10448e9576eb18a05e68efb8cfefff966 /src/northbridge
parent8275bad6f640d0da5ead72984f1efe32e6172d7d (diff)
* update quartet target to latest SMP changes.
* remove dead code from coherent_ht.c * add ldtstop code for link speed changes git-svn-id: svn://svn.coreboot.org/coreboot/trunk@991 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/amd/amdk8/coherent_ht.c395
1 files changed, 3 insertions, 392 deletions
diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c
index 23ebd60e81..471af5a415 100644
--- a/src/northbridge/amd/amdk8/coherent_ht.c
+++ b/src/northbridge/amd/amdk8/coherent_ht.c
@@ -1,333 +1,3 @@
-#if 0
-static void setup_coherent_ht_domain(void)
-{
- static const unsigned int register_values[] = {
- /* Routing Table Node i
- * F0:0x40 i = 0,
- * F0:0x44 i = 1,
- * F0:0x48 i = 2,
- * F0:0x4c i = 3,
- * F0:0x50 i = 4,
- * F0:0x54 i = 5,
- * F0:0x58 i = 6,
- * F0:0x5c i = 7
- * [ 0: 3] Request Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [11: 8] Response Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [19:16] Broadcast route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- */
- PCI_ADDR(0, 0x18, 0, 0x40), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x44), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x48), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x4c), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x50), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x54), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x58), 0xfff0f0f0, 0x00010101,
- PCI_ADDR(0, 0x18, 0, 0x5c), 0xfff0f0f0, 0x00010101,
-
- /* Hypetransport Transaction Control Register
- * F0:0x68
- * [ 0: 0] Disable read byte probe
- * 0 = Probes issues
- * 1 = Probes not issued
- * [ 1: 1] Disable Read Doubleword probe
- * 0 = Probes issued
- * 1 = Probes not issued
- * [ 2: 2] Disable write byte probes
- * 0 = Probes issued
- * 1 = Probes not issued
- * [ 3: 3] Disable Write Doubleword Probes
- * 0 = Probes issued
- * 1 = Probes not issued.
- * [ 4: 4] Disable Memroy Controller Target Start
- * 0 = TgtStart packets are generated
- * 1 = TgtStart packets are not generated.
- * [ 5: 5] CPU1 Enable
- * 0 = Second CPU disabled or not present
- * 1 = Second CPU enabled.
- * [ 6: 6] CPU Request PassPW
- * 0 = CPU requests do not pass posted writes
- * 1 = CPU requests pass posted writes.
- * [ 7: 7] CPU read Respons PassPW
- * 0 = CPU Responses do not pass posted writes
- * 1 = CPU responses pass posted writes.
- * [ 8: 8] Disable Probe Memory Cancel
- * 0 = Probes may generate MemCancels
- * 1 = Probes may not generate MemCancels
- * [ 9: 9] Disable Remote Probe Memory Cancel.
- * 0 = Probes hitting dirty blocks generate memory cancel packets
- * 1 = Only probed caches on the same node as the memory controller
- * generate cancel packets.
- * [10:10] Disable Fill Probe
- * 0 = Probes issued for cache fills
- * 1 = Probes not issued for cache fills.
- * [11:11] Response PassPw
- * 0 = Downstream response PassPW based on original request
- * 1 = Downstream response PassPW set to 1
- * [12:12] Change ISOC to Ordered
- * 0 = Bit 1 of coherent HT RdSz/WrSz command used for iosynchronous prioritization
- * 1 = Bit 1 of coherent HT RdSz/WrSz command used for ordering.
- * [14:13] Buffer Release Priority select
- * 00 = 64
- * 01 = 16
- * 10 = 8
- * 11 = 2
- * [15:15] Limit Coherent HT Configuration Space Range
- * 0 = No coherent HT configuration space restrictions
- * 1 = Limit coherent HT configuration space based on node count
- * [16:16] Local Interrupt Conversion Enable.
- * 0 = ExtInt/NMI interrups unaffected.
- * 1 = ExtInt/NMI broadcat interrupts converted to LINT0/1
- * [17:17] APIC Extended Broadcast Enable.
- * 0 = APIC broadcast is 0F
- * 1 = APIC broadcast is FF
- * [18:18] APIC Extended ID Enable
- * 0 = APIC ID is 4 bits.
- * 1 = APIC ID is 8 bits.
- * [19:19] APIC Extended Spurious Vector Enable
- * 0 = Lower 4 bits of spurious vector are read-only 1111
- * 1 = Lower 4 bits of spurious vecotr are writeable.
- * [20:20] Sequence ID Source Node Enable
- * 0 = Normal operation
- * 1 = Keep SeqID on routed packets for debugging.
- * [22:21] Downstream non-posted request limit
- * 00 = No limit
- * 01 = Limited to 1
- * 10 = Limited to 4
- * 11 = Limited to 8
- * [23:23] RESERVED
- * [25:24] Medium-Priority Bypass Count
- * - Maximum # of times a medium priority access can pass a low
- * priority access before Medium-Priority mode is disabled for one access.
- * [27:26] High-Priority Bypass Count
- * - Maximum # of times a high prioirty access can pass a medium or low
- * priority access before High-prioirty mode is disabled for one access.
- * [28:28] Enable High Priority CPU Reads
- * 0 = Cpu reads are medium prioirty
- * 1 = Cpu reads are high prioirty
- * [29:29] Disable Low Priority Writes
- * 0 = Non-isochronous writes are low priority
- * 1 = Non-isochronous writes are medium prioirty
- * [30:30] Disable High Priority Isochronous writes
- * 0 = Isochronous writes are high priority
- * 1 = Isochronous writes are medium priority
- * [31:31] Disable Medium Priority Isochronous writes
- * 0 = Isochronous writes are medium are high
- * 1 = With bit 30 set makes Isochrouns writes low priority.
- */
- PCI_ADDR(0, 0x18, 0, 0x68), 0x00800000, 0x0f00840f,
- /* HT Initialization Control Register
- * F0:0x6C ok...
- * [ 0: 0] Routing Table Disable
- * 0 = Packets are routed according to routing tables
- * 1 = Packets are routed according to the default link field
- * [ 1: 1] Request Disable (BSP should clear this)
- * 0 = Request packets may be generated
- * 1 = Request packets may not be generated.
- * [ 3: 2] Default Link (Read-only)
- * 00 = LDT0
- * 01 = LDT1
- * 10 = LDT2
- * 11 = CPU on same node
- * [ 4: 4] Cold Reset
- * - Scratch bit cleared by a cold reset
- * [ 5: 5] BIOS Reset Detect
- * - Scratch bit cleared by a cold reset
- * [ 6: 6] INIT Detect
- * - Scratch bit cleared by a warm or cold reset not by an INIT
- *
- */
- PCI_ADDR(0, 0x18, 0, 0x6C), 0xffffff8c, 0x00000000 | (1 << 6) |(1 << 5)| (1 << 4),
- /* LDTi Capabilities Registers
- * F0:0x80 i = 0,
- * F0:0xA0 i = 1,
- * F0:0xC0 i = 2,
- */
- /* LDTi Link Control Registrs
- * F0:0x84 i = 0,
- * F0:0xA4 i = 1,
- * F0:0xC4 i = 2,
- * [ 1: 1] CRC Flood Enable
- * 0 = Do not generate sync packets on CRC error
- * 1 = Generate sync packets on CRC error
- * [ 2: 2] CRC Start Test (Read-Only)
- * [ 3: 3] CRC Force Frame Error
- * 0 = Do not generate bad CRC
- * 1 = Generate bad CRC
- * [ 4: 4] Link Failure
- * 0 = No link failure detected
- * 1 = Link failure detected
- * [ 5: 5] Initialization Complete
- * 0 = Initialization not complete
- * 1 = Initialization complete
- * [ 6: 6] Receiver off
- * 0 = Recevier on
- * 1 = Receiver off
- * [ 7: 7] Transmitter Off
- * 0 = Transmitter on
- * 1 = Transmitter off
- * [ 9: 8] CRC_Error
- * 00 = No error
- * [0] = 1 Error on byte lane 0
- * [1] = 1 Error on byte lane 1
- * [12:12] Isochrnous Enable (Read-Only)
- * [13:13] HT Stop Tristate Enable
- * 0 = Driven during an LDTSTOP_L
- * 1 = Tristated during and LDTSTOP_L
- * [14:14] Extended CTL Time
- * 0 = CTL is asserted for 16 bit times during link initialization
- * 1 = CTL is asserted for 50us during link initialization
- * [18:16] Max Link Width In (Read-Only?)
- * 000 = 8 bit link
- * 001 = 16bit link
- * [19:19] Doubleword Flow Control in (Read-Only)
- * 0 = This link does not support doubleword flow control
- * 1 = This link supports doubleword flow control
- * [22:20] Max Link Width Out (Read-Only?)
- * 000 = 8 bit link
- * 001 = 16bit link
- * [23:23] Doubleworld Flow Control out (Read-Only)
- * 0 = This link does not support doubleword flow control
- * 1 = This link supports doubleworkd flow control
- * [26:24] Link Width In
- * 000 = Use 8 bits
- * 001 = Use 16 bits
- * 010 = reserved
- * 011 = Use 32 bits
- * 100 = Use 2 bits
- * 101 = Use 4 bits
- * 110 = reserved
- * 111 = Link physically not connected
- * [27:27] Doubleword Flow Control In Enable
- * 0 = Doubleword flow control disabled
- * 1 = Doubleword flow control enabled (Not currently supported)
- * [30:28] Link Width Out
- * 000 = Use 8 bits
- * 001 = Use 16 bits
- * 010 = reserved
- * 011 = Use 32 bits
- * 100 = Use 2 bits
- * 101 = Use 4 bits
- * 110 = reserved
- * 111 = Link physically not connected
- * [31:31] Doubleworld Flow Control Out Enable
- * 0 = Doubleworld flow control disabled
- * 1 = Doubleword flow control enabled (Not currently supported)
- */
- PCI_ADDR(0, 0x18, 0, 0x84), 0x00009c05, 0x11110020,
- /* LDTi Frequency/Revision Registers
- * F0:0x88 i = 0,
- * F0:0xA8 i = 1,
- * F0:0xC8 i = 2,
- * [ 4: 0] Minor Revision
- * Contains the HT Minor revision
- * [ 7: 5] Major Revision
- * Contains the HT Major revision
- * [11: 8] Link Frequency (Takes effect the next time the link is reconnected)
- * 0000 = 200Mhz
- * 0001 = reserved
- * 0010 = 400Mhz
- * 0011 = reserved
- * 0100 = 600Mhz
- * 0101 = 800Mhz
- * 0110 = 1000Mhz
- * 0111 = reserved
- * 1000 = reserved
- * 1001 = reserved
- * 1010 = reserved
- * 1011 = reserved
- * 1100 = reserved
- * 1101 = reserved
- * 1110 = reserved
- * 1111 = 100 Mhz
- * [15:12] Error (Not currently Implemented)
- * [31:16] Indicates the frequency capabilities of the link
- * [16] = 1 encoding 0000 of freq supported
- * [17] = 1 encoding 0001 of freq supported
- * [18] = 1 encoding 0010 of freq supported
- * [19] = 1 encoding 0011 of freq supported
- * [20] = 1 encoding 0100 of freq supported
- * [21] = 1 encoding 0101 of freq supported
- * [22] = 1 encoding 0110 of freq supported
- * [23] = 1 encoding 0111 of freq supported
- * [24] = 1 encoding 1000 of freq supported
- * [25] = 1 encoding 1001 of freq supported
- * [26] = 1 encoding 1010 of freq supported
- * [27] = 1 encoding 1011 of freq supported
- * [28] = 1 encoding 1100 of freq supported
- * [29] = 1 encoding 1101 of freq supported
- * [30] = 1 encoding 1110 of freq supported
- * [31] = 1 encoding 1111 of freq supported
- */
- PCI_ADDR(0, 0x18, 0, 0x88), 0xfffff0ff, 0x00000200,
- /* LDTi Feature Capability
- * F0:0x8C i = 0,
- * F0:0xAC i = 1,
- * F0:0xCC i = 2,
- */
- /* LDTi Buffer Count Registers
- * F0:0x90 i = 0,
- * F0:0xB0 i = 1,
- * F0:0xD0 i = 2,
- */
- /* LDTi Bus Number Registers
- * F0:0x94 i = 0,
- * F0:0xB4 i = 1,
- * F0:0xD4 i = 2,
- * For NonCoherent HT specifies the bus number downstream (behind the host bridge)
- * [ 0: 7] Primary Bus Number
- * [15: 8] Secondary Bus Number
- * [23:15] Subordiante Bus Number
- * [31:24] reserved
- */
- PCI_ADDR(0, 0x18, 0, 0x94), 0xff000000, 0x00ff0000,
- /* LDTi Type Registers
- * F0:0x98 i = 0,
- * F0:0xB8 i = 1,
- * F0:0xD8 i = 2,
- */
- };
- int i;
- int max;
- print_debug("setting up coherent ht domain....\r\n");
- max = sizeof(register_values)/sizeof(register_values[0]);
- for(i = 0; i < max; i += 3) {
- device_t dev;
- unsigned where;
- unsigned long reg;
-#if 0
- print_debug_hex32(register_values[i]);
- print_debug(" <-");
- print_debug_hex32(register_values[i+2]);
- print_debug("\r\n");
-#endif
- dev = register_values[i] & ~0xff;
- where = register_values[i] & 0xff;
- reg = pci_read_config32(dev, where);
- reg &= register_values[i+1];
- reg |= register_values[i+2];
- pci_write_config32(dev, where, reg);
-#if 0
- reg = pci_read_config32(register_values[i]);
- reg &= register_values[i+1];
- reg |= register_values[i+2] & ~register_values[i+1];
- pci_write_config32(register_values[i], reg);
-#endif
- }
- print_debug("done.\r\n");
-}
-#else
/* coherent hypertransport initialization for AMD64
* written by Stefan Reinauer <stepan@openbios.info>
* (c) 2003 by SuSE Linux AG
@@ -343,13 +13,12 @@ static void setup_coherent_ht_domain(void)
*
*/
-#if 0
-#include "compat.h"
-#endif
-
#include <device/pci_def.h>
#include "arch/romcc_io.h"
+/*
+ *
+ */
/* when generating a temporary row configuration we
* don't want broadcast to be enabled for that node.
@@ -493,62 +162,6 @@ static bool check_connection(u8 src, u8 dest, u8 link)
return 1;
}
-#if 0
-static unsigned int generate_row(u8 node, u8 row, u8 maxnodes)
-{
- /* Routing Table Node i
- *
- * F0: 0x40, 0x44, 0x48, 0x4c, 0x50, 0x54, 0x58, 0x5c
- * i: 0, 1, 2, 3, 4, 5, 6, 7
- *
- * [ 0: 3] Request Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [11: 8] Response Route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- * [19:16] Broadcast route
- * [0] Route to this node
- * [1] Route to Link 0
- * [2] Route to Link 1
- * [3] Route to Link 2
- */
-
- u32 ret=DEFAULT;
-
- static const unsigned int rows_2p[2][2] = {
- { 0x00050101, 0x00010404 },
- { 0x00010404, 0x00050101 }
- };
-
- static const unsigned int rows_4p[4][4] = {
- { 0x00070101, 0x00010404, 0x00050202, 0x00010402 },
- { 0x00010808, 0x000b0101, 0x00010802, 0x00090202 },
- { 0x00090202, 0x00010802, 0x000b0101, 0x00010808 },
- { 0x00010402, 0x00050202, 0x00010404, 0x00070101 }
- };
-
- if (!(node>=maxnodes || row>=maxnodes)) {
- if (maxnodes==2)
- ret=rows_2p[node][row];
- if (maxnodes==4)
- ret=rows_4p[node][row];
- }
-
-#if 0
- printk_spew("generating entry n=%d, r=%d, max=%d - row=%x\n",
- node,row,maxnodes,ret);
-#endif
-
- return ret;
-}
-#endif
-
-
static void fill_row(u8 node, u8 row, u32 value)
{
#if 0
@@ -835,5 +448,3 @@ static int setup_coherent_ht_domain(void)
return reset_needed;
}
-
-#endif