summaryrefslogtreecommitdiff
path: root/src/northbridge
diff options
context:
space:
mode:
authorDuncan Laurie <dlaurie@chromium.org>2013-03-08 17:00:37 -0800
committerRonald G. Minnich <rminnich@gmail.com>2013-03-21 23:11:25 +0100
commit467f31de92ca2ed9df1530270e9aabdd69fe8f88 (patch)
tree61092ad464c81d2f69cc66fc27e2db1ccb2df710 /src/northbridge
parent7922b468b51eea58c7238f11b21820b8d3747d6b (diff)
haswell/lynxpoint: Use new PCH/PM helper functions
This makes use of the new functions from pmutil.c that take care of the differences between -H and -LP chipsets. It also adds support for the LynxPoint-LP GPE0 register block and the SMI/SCI routing differences. The FADT is updated to report the new 256 byte GPE0 block on wtm2/wtm2 boards which is too big for the 64bit X_GPE0 address block so that part is zeroed to prevent IASL and the kernel from complaining about a mismatch. This was tested on WTM2. Unfortunately I am still unable to get an SCI delivered from the EC but I suspect that is due to a magic command needed to put the EC in ACPI mode. Instead I verified that all of the power management and GPIO registers were set to expected values. I also tested transitions into S3 and S5 from both the kernel and by pressing the power button at the developer mode screen and they all function as expected. Change-Id: Ice9e798ea5144db228349ce90540745c0780b20a Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/2816 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Diffstat (limited to 'src/northbridge')
-rw-r--r--src/northbridge/intel/haswell/acpi.c13
1 files changed, 4 insertions, 9 deletions
diff --git a/src/northbridge/intel/haswell/acpi.c b/src/northbridge/intel/haswell/acpi.c
index e4d86be27f..81da086e01 100644
--- a/src/northbridge/intel/haswell/acpi.c
+++ b/src/northbridge/intel/haswell/acpi.c
@@ -182,17 +182,12 @@ int init_igd_opregion(igd_opregion_t *opregion)
pci_write_config16(igd, SWSCI, reg16);
/* clear dmisci status */
- reg16 = inw(DEFAULT_PMBASE + TCO1_STS);
+ reg16 = inw(get_pmbase() + TCO1_STS);
reg16 |= DMISCI_STS; // reference code does an &=
- outw(DEFAULT_PMBASE + TCO1_STS, reg16);
+ outw(get_pmbase() + TCO1_STS, reg16);
- /* clear acpi tco status */
- outl(DEFAULT_PMBASE + GPE0_STS, TCOSCI_STS);
-
- /* enable acpi tco scis */
- reg16 = inw(DEFAULT_PMBASE + GPE0_EN);
- reg16 |= TCOSCI_EN;
- outw(DEFAULT_PMBASE + GPE0_EN, reg16);
+ /* clear and enable ACPI TCO SCI */
+ enable_tco_sci();
return 0;
}