drop setup_ics code that was blatantly copied from cx700 and

was mainboard specific and unused there already.

some more minor warning fixes.

Signed-off-by: Stefan Reinauer <stepan@coresystems.de>
Acked-by: Stefan Reinauer <stepan@coresystems.de>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@5433 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

4 files changed, 7 insertions, 74 deletions

diff --git a/src/northbridge/via/cn400/vgabios.c b/src/northbridge/via/cn400/vgabios.c
index 83ae77c4bb..5519b309cd 100644
--- a/src/northbridge/via/cn400/vgabios.c
+++ b/src/northbridge/via/cn400/vgabios.c
@@ -336,7 +336,7 @@ void do_vgabios(void)
 {
 	device_t dev;
 	unsigned long busdevfn;
-	unsigned int rom = 0;
+	u32 rom;
 	unsigned char *buf;
 	unsigned int size = 64*1024;
 	int i;
@@ -357,7 +357,7 @@ void do_vgabios(void)
 	/* declare rom address here - keep any config data out of the way
 	 * of core LXB stuff */
 
-        rom = cbfs_load_optionrom(dev->vendor, dev->device, 0);
+        rom = (u32)cbfs_load_optionrom(dev->vendor, dev->device, 0);
 	pci_write_config32(dev, PCI_ROM_ADDRESS, rom|1);
 	printk(BIOS_DEBUG, "VGA BIOS ROM base address: %x\n", rom);
 
diff --git a/src/northbridge/via/vx800/rank_map.c b/src/northbridge/via/vx800/rank_map.c
index df39ce5899..6c88c68953 100644
--- a/src/northbridge/via/vx800/rank_map.c
+++ b/src/northbridge/via/vx800/rank_map.c
@@ -17,12 +17,6 @@
  * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
  */
 
-extern void DRAMSetVRNum(DRAM_SYS_ATTR * DramAttr,
-			 u8 PhyRank, u8 VirRank, BOOLEAN Enable);
-
-extern void SetEndingAddr(DRAM_SYS_ATTR * DramAttr, u8 VirRank,	// Ending address register      number indicator (INDEX
-			  INT8 Value);	// (value) add or subtract value to this and after banks
-
 void DRAMClearEndingAddress(DRAM_SYS_ATTR * DramAttr);
 
 void DRAMSizingEachRank(DRAM_SYS_ATTR * DramAttr);
diff --git a/src/northbridge/via/vx800/vgabios.c b/src/northbridge/via/vx800/vgabios.c
index 9690170d1e..9425403afd 100644
--- a/src/northbridge/via/vx800/vgabios.c
+++ b/src/northbridge/via/vx800/vgabios.c
@@ -158,6 +158,7 @@ static void real_mode_switch_call_vga(unsigned long devfn)
 				    /* put the stack at the end of page zero. 
 				     * that way we can easily share it between real and protected, 
 				     * since the 16-bit ESP at segment 0 will work for any case. 
+				     */
 				     /* Setup a stack */
 				    "	mov	$0x0, %ax	\n"
 				    "	mov	%ax, %ss	\n"
@@ -240,6 +241,7 @@ void vga_enable_console()
 				    /* put the stack at the end of page zero. 
 				     * that way we can easily share it between real and protected, 
 				     * since the 16-bit ESP at segment 0 will work for any case. 
+				     */
 				     /* Setup a stack */
 				    "	mov	$0x0, %ax	\n"
 				    "	mov	%ax, %ss	\n"
@@ -295,7 +297,7 @@ void do_vgabios(void)
 {
 	device_t dev;
 	unsigned long busdevfn;
-	unsigned int rom = 0;
+	u32 rom;
 	unsigned char *buf;
 	unsigned int size = 64 * 1024;
 	int i;
@@ -318,7 +320,7 @@ void do_vgabios(void)
 	/* declare rom address here - keep any config data out of the way
 	 * of core LXB stuff */
 
-        rom = cbfs_load_optionrom(dev->vendor, dev->device, 0);
+        rom = (u32)cbfs_load_optionrom(dev->vendor, dev->device, 0);
 	pci_write_config32(dev, PCI_ROM_ADDRESS, rom | 1);
 	printk(BIOS_DEBUG, "rom base: %x\n", rom);
 	buf = (unsigned char *)rom;
@@ -617,7 +619,7 @@ void setup_realmode_idt(void)
 	   TF bit is set upon call to real mode */
 	idts[1].cs = 0;
 	idts[1].offset = 16384;
-	memcpy(16384, &debughandle, &end_debughandle - &debughandle);
+	memcpy((void *)16384, &debughandle, &end_debughandle - &debughandle);
 
 }
 
diff --git a/src/northbridge/via/vx800/vx800_early_smbus.c b/src/northbridge/via/vx800/vx800_early_smbus.c
index 53ede31cf8..7ba9b41acb 100644
--- a/src/northbridge/via/vx800/vx800_early_smbus.c
+++ b/src/northbridge/via/vx800/vx800_early_smbus.c
@@ -108,62 +108,6 @@ static void smbus_reset(void)
 }
 
 /* Public functions */
-static unsigned int set_ics_data(unsigned char dev, int data, char len)
-{
-	smbus_reset();
-	/* clear host data port */
-	outb(0x00, SMBHSTDAT0);
-	SMBUS_DELAY();
-	smbus_wait_until_ready();
-
-	/* read to reset block transfer counter */
-	inb(SMBHSTCTL);
-
-	/* fill blocktransfer array */
-	if (dev == 0xd2) {
-		//char d2_data[] = {0x0d,0x00,0x3f,0xcd,0x7f,0xbf,0x1a,0x2a,0x01,0x0f,0x0b,0x00,0x8d,0x9b};
-		outb(0x0d, SMBBLKDAT);
-		outb(0x00, SMBBLKDAT);
-		outb(0x3f, SMBBLKDAT);
-		outb(0xcd, SMBBLKDAT);
-		outb(0x7f, SMBBLKDAT);
-		outb(0xbf, SMBBLKDAT);
-		outb(0x1a, SMBBLKDAT);
-		outb(0x2a, SMBBLKDAT);
-		outb(0x01, SMBBLKDAT);
-		outb(0x0f, SMBBLKDAT);
-		outb(0x0b, SMBBLKDAT);
-		outb(0x80, SMBBLKDAT);
-		outb(0x8d, SMBBLKDAT);
-		outb(0x9b, SMBBLKDAT);
-	} else {
-		//char d4_data[] = {0x08,0xff,0x3f,0x00,0x00,0xff,0xff,0xff,0xff};
-		outb(0x08, SMBBLKDAT);
-		outb(0xff, SMBBLKDAT);
-		outb(0x3f, SMBBLKDAT);
-		outb(0x00, SMBBLKDAT);
-		outb(0x00, SMBBLKDAT);
-		outb(0xff, SMBBLKDAT);
-		outb(0xff, SMBBLKDAT);
-		outb(0xff, SMBBLKDAT);
-		outb(0xff, SMBBLKDAT);
-	}
-
-	//for (i=0; i < len; i++)
-	//      outb(data[i],SMBBLKDAT);
-
-	outb(dev, SMBXMITADD);
-	outb(0, SMBHSTCMD);
-	outb(len, SMBHSTDAT0);
-	outb(0x74, SMBHSTCTL);
-
-	SMBUS_DELAY();
-
-	smbus_wait_until_ready();
-
-	smbus_reset();
-	return 0;
-}
 
 static unsigned int get_spd_data(unsigned int dimm, unsigned int offset)
 {
@@ -219,13 +163,6 @@ static void enable_smbus(void)
 	/* Make it work for I/O ... */
 	pci_write_config16(dev, 0x04, 0x0003);
 
-	/*
-	   coreboot hangs at this two lines after os reboot(this even happen after I change os 
-	   reboot to cold reboot, this also interfere S3 wakeup) */
-	/* Setup clock chips */
-	//set_ics_data(0xd2, 0, 14);
-	//set_ics_data(0xd4, 0, 9);
-
 	smbus_reset();
 	/* clear host data port */
 	outb(0x00, SMBHSTDAT0);