summaryrefslogtreecommitdiff
path: root/src/northbridge/via
diff options
context:
space:
mode:
authorEric Biederman <ebiederm@xmission.com>2003-10-03 02:53:02 +0000
committerEric Biederman <ebiederm@xmission.com>2003-10-03 02:53:02 +0000
commit5ebf4d343147743c2c856f62fa5953046efa7483 (patch)
tree67159c7d76f0ba77aeaeeebf34125f14da7b3a11 /src/northbridge/via
parentfae510cd84dcf175d27c7cf2a5662afcab2cc76d (diff)
- Modify the code to C style indenting.
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1180 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/via')
-rw-r--r--src/northbridge/via/vt8601/raminit.c754
-rw-r--r--src/northbridge/via/vt8601/raminit.h2
2 files changed, 384 insertions, 372 deletions
diff --git a/src/northbridge/via/vt8601/raminit.c b/src/northbridge/via/vt8601/raminit.c
index ec52d6e7da..57738e336e 100644
--- a/src/northbridge/via/vt8601/raminit.c
+++ b/src/northbridge/via/vt8601/raminit.c
@@ -47,424 +47,436 @@ it with the version available from LANL.
#define DIMM_CL2 0
#endif
-void dimms_read(unsigned long x) {
- uint8_t c;
- unsigned long eax;
- volatile unsigned long y;
- eax = x;
- for(c = 0; c < 6; c++) {
-
- print_err("dimms_read: ");
- print_err_hex32(eax);
- print_err("\r\n");
- y = * (volatile unsigned long *) eax;
- eax += 0x10000000;
- }
+void dimms_read(unsigned long x)
+{
+ uint8_t c;
+ unsigned long eax;
+ volatile unsigned long y;
+ eax = x;
+ for(c = 0; c < 6; c++) {
+
+ print_err("dimms_read: ");
+ print_err_hex32(eax);
+ print_err("\r\n");
+ y = * (volatile unsigned long *) eax;
+ eax += 0x10000000;
+ }
}
-void dimms_write(int x) {
- uint8_t c;
- unsigned long eax = x;
- for(c = 0; c < 6; c++) {
- print_err("dimms_write: ");
- print_err_hex32(eax);
- print_err("\r\n");
- *(volatile unsigned long *) eax = 0;
- eax += 0x10000000;
- }
+void dimms_write(int x)
+{
+ uint8_t c;
+ unsigned long eax = x;
+ for(c = 0; c < 6; c++) {
+ print_err("dimms_write: ");
+ print_err_hex32(eax);
+ print_err("\r\n");
+ *(volatile unsigned long *) eax = 0;
+ eax += 0x10000000;
+ }
}
#ifdef DEBUG_SETNORTHB
-void setnorthb(device_t north, uint8_t reg, uint8_t val) {
- print_err("setnorth: reg ");
- print_err_hex8(reg);
- print_err(" to ");
- print_err_hex8(val);
- print_err("\r\n");
- pci_write_config8(north, reg, val);
+void setnorthb(device_t north, uint8_t reg, uint8_t val)
+{
+ print_err("setnorth: reg ");
+ print_err_hex8(reg);
+ print_err(" to ");
+ print_err_hex8(val);
+ print_err("\r\n");
+ pci_write_config8(north, reg, val);
}
#else
#define setnorthb pci_write_config8
#endif
void
-dumpnorth(device_t north) {
- uint8_t r, c;
- for(r = 0; r < 256; r += 16) {
- print_err_hex8(r);
- print_err(":");
- for(c = 0; c < 16; c++) {
- print_err_hex8(pci_read_config8(north, r+c));
- print_err(" ");
- }
- print_err("\r\n");
+dumpnorth(device_t north)
+{
+ uint8_t r, c;
+ for(r = 0; r < 256; r += 16) {
+ print_err_hex8(r);
+ print_err(":");
+ for(c = 0; c < 16; c++) {
+ print_err_hex8(pci_read_config8(north, r+c));
+ print_err(" ");
+ }
+ print_err("\r\n");
}
}
-static void sdram_set_registers(const struct mem_controller *ctrl) {
- static const uint16_t raminit_ma_reg_table[] = {
- /* Values for MA type register to try */
- 0x0000, 0x8088, 0xe0ee,
- 0xffff // end mark
- };
- static const unsigned char ramregs[] = {0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
- 0x56, 0x57};
-
- device_t north = (device_t) 0;
- uint8_t c, r;
- print_err("vt8601 init starting\n");
- north = pci_locate_device(PCI_ID(0x1106, 0x8601), 0);
- north = 0;
- print_err_hex32(north);
- print_err(" is the north\n");
- print_err_hex16(pci_read_config16(north, 0));
- print_err(" ");
- print_err_hex16(pci_read_config16(north, 2));
- print_err("\r\n");
+static void sdram_set_registers(const struct mem_controller *ctrl)
+{
+ static const uint16_t raminit_ma_reg_table[] = {
+ /* Values for MA type register to try */
+ 0x0000, 0x8088, 0xe0ee,
+ 0xffff // end mark
+ };
+ static const unsigned char ramregs[] = {0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
+ 0x56, 0x57};
- /* All we are doing now is setting initial known-good values that will
- * be revised later as we read SPD
- */
- // memory clk enable. We are not using ECC
- pci_write_config8(north,0x78, 0x01);
- print_err_hex8(pci_read_config8(north, 0x78));
- // dram control, see the book.
+ device_t north = (device_t) 0;
+ uint8_t c, r;
+
+ print_err("vt8601 init starting\n");
+ north = pci_locate_device(PCI_ID(0x1106, 0x8601), 0);
+ north = 0;
+ print_err_hex32(north);
+ print_err(" is the north\n");
+ print_err_hex16(pci_read_config16(north, 0));
+ print_err(" ");
+ print_err_hex16(pci_read_config16(north, 2));
+ print_err("\r\n");
+
+ /* All we are doing now is setting initial known-good values that will
+ * be revised later as we read SPD
+ */
+ // memory clk enable. We are not using ECC
+ pci_write_config8(north,0x78, 0x01);
+ print_err_hex8(pci_read_config8(north, 0x78));
+ // dram control, see the book.
#if DIMM_PC133
- pci_write_config8(north,0x68, 0x52);
+ pci_write_config8(north,0x68, 0x52);
#else
- pci_write_config8(north,0x68, 0x42);
+ pci_write_config8(north,0x68, 0x42);
#endif
- // dram control, see the book.
- pci_write_config8(north,0x6B, 0x0c);
- // Initial setting, 256MB in each bank, will be rewritten later.
- pci_write_config8(north,0x5A, 0x20);
- print_err_hex8(pci_read_config8(north, 0x5a));
- pci_write_config8(north,0x5B, 0x40);
- pci_write_config8(north,0x5C, 0x60);
- pci_write_config8(north,0x5D, 0x80);
- pci_write_config8(north,0x5E, 0xA0);
- pci_write_config8(north,0x5F, 0xC0);
- // It seems we have to take care of these 2 registers as if
- // they are bank 6 and 7.
- pci_write_config8(north,0x56, 0xC0);
- pci_write_config8(north,0x57, 0xC0);
-
- // SDRAM in all banks
- pci_write_config8(north,0x60, 0x3F);
- // DRAM timing. I'm suspicious of this
- // This is for all banks, 64 is 0,1. 65 is 2,3. 66 is 4,5.
- // ras precharge 4T, RAS pulse 5T
- // cas2 is 0xd6, cas3 is 0xe6
- // we're also backing off write pulse width to 2T, so result is 0xee
+ // dram control, see the book.
+ pci_write_config8(north,0x6B, 0x0c);
+ // Initial setting, 256MB in each bank, will be rewritten later.
+ pci_write_config8(north,0x5A, 0x20);
+ print_err_hex8(pci_read_config8(north, 0x5a));
+ pci_write_config8(north,0x5B, 0x40);
+ pci_write_config8(north,0x5C, 0x60);
+ pci_write_config8(north,0x5D, 0x80);
+ pci_write_config8(north,0x5E, 0xA0);
+ pci_write_config8(north,0x5F, 0xC0);
+ // It seems we have to take care of these 2 registers as if
+ // they are bank 6 and 7.
+ pci_write_config8(north,0x56, 0xC0);
+ pci_write_config8(north,0x57, 0xC0);
+
+ // SDRAM in all banks
+ pci_write_config8(north,0x60, 0x3F);
+ // DRAM timing. I'm suspicious of this
+ // This is for all banks, 64 is 0,1. 65 is 2,3. 66 is 4,5.
+ // ras precharge 4T, RAS pulse 5T
+ // cas2 is 0xd6, cas3 is 0xe6
+ // we're also backing off write pulse width to 2T, so result is 0xee
#if DIMM_CL2
- pci_write_config8(north,0x64, 0xd4);
- pci_write_config8(north,0x65, 0xd4);
- pci_write_config8(north,0x66, 0xd4);
+ pci_write_config8(north,0x64, 0xd4);
+ pci_write_config8(north,0x65, 0xd4);
+ pci_write_config8(north,0x66, 0xd4);
#else // CL=3
- pci_write_config8(north,0x64, 0xe4);
- pci_write_config8(north,0x65, 0xe4);
- pci_write_config8(north,0x66, 0xe4);
+ pci_write_config8(north,0x64, 0xe4);
+ pci_write_config8(north,0x65, 0xe4);
+ pci_write_config8(north,0x66, 0xe4);
#endif
- // dram frequency select.
- // enable 4K pages for 64M dram.
+ // dram frequency select.
+ // enable 4K pages for 64M dram.
#if DIMM_PC133
- pci_write_config8(north,0x69, 0x3c);
+ pci_write_config8(north,0x69, 0x3c);
#else
- pci_write_config8(north,0x69, 0xac);
+ pci_write_config8(north,0x69, 0xac);
#endif
- /* IMPORTANT -- disable refresh counter */
- // refresh counter, disabled.
- pci_write_config8(north,0x6A, 0x00);
-
+ /* IMPORTANT -- disable refresh counter */
+ // refresh counter, disabled.
+ pci_write_config8(north,0x6A, 0x00);
+
- // clkenable configuration. kevinh FIXME - add precharge
- pci_write_config8(north,0x6C, 0x00);
- // dram read latch delay of 1 ns, MD drive 8 mA,
- // high drive strength on MA[2: 13], we#, cas#, ras#
- // As per Cindy Lee, set to 0x37, not 0x57
- pci_write_config8(north,0x6D, 0x7f);
+ // clkenable configuration. kevinh FIXME - add precharge
+ pci_write_config8(north,0x6C, 0x00);
+ // dram read latch delay of 1 ns, MD drive 8 mA,
+ // high drive strength on MA[2: 13], we#, cas#, ras#
+ // As per Cindy Lee, set to 0x37, not 0x57
+ pci_write_config8(north,0x6D, 0x7f);
- /* Initialize all banks at once */
+ /* Initialize all banks at once */
}
/* slot is the dram slot. Base is the *8M base. */
static unsigned char
-do_module_size(unsigned char slot) { /*, unsigned char base) */
- static const unsigned char log2[256] = {[1] = 0, [2] = 1, [4] = 2, [8] = 3,
- [16]=4, [32]=5, [64]=6,
- [128]=7};
- static const uint8_t ramregs[] = {0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
- 0x56, 0x57};
- device_t north = 0;
- /* for all the DRAMS, see if they are there and get the size of each
- * module. This is just a very early first cut at sizing.
- */
- /* we may run out of registers ... */
- unsigned char width, banks, rows, cols, reg;
- unsigned char value = 0;
- unsigned char module = 0xa1 | (slot << 1);
- /* is the module there? if byte 2 is not 4, then we'll assume it
- * is useless.
- */
- if (smbus_read_byte(module, 2) != 4)
- goto done;
-
- //print_err_hex8(slot);
- // print_err(" is SDRAM\n");
- width = smbus_read_byte(module, 6) | (smbus_read_byte(module,7)<<0);
- banks = smbus_read_byte(module, 17);
- /* we're going to assume symmetric banks. Sorry. */
- cols = smbus_read_byte(module, 4) & 0xf;
- rows = smbus_read_byte(module, 3) & 0xf;
- /* grand total. You have rows+cols addressing, * times of banks, times
- * width of data in bytes*/
- /* do this in terms of address bits. Then subtract 23 from it.
- * That might do it.
- */
- value = cols + rows + log2[banks] + log2[width];
- value -= 23;
- /* now subtract 3 more bits as these are 8-bit bytes */
- value -= 3;
- // print_err_hex8(value);
- // print_err(" is the # bits for this bank\n");
- /* now put that size into the correct register */
- value = (1 << value);
+do_module_size(unsigned char slot /*, unsigned char base) */)
+{
+ static const unsigned char log2[256] = {
+ [1] = 0, [2] = 1, [4] = 2, [8] = 3,
+ [16]=4, [32]=5, [64]=6,
+ [128]=7
+ };
+ static const uint8_t ramregs[] = {0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
+ 0x56, 0x57};
+ device_t north = 0;
+ /* for all the DRAMS, see if they are there and get the size of each
+ * module. This is just a very early first cut at sizing.
+ */
+ /* we may run out of registers ... */
+ unsigned char width, banks, rows, cols, reg;
+ unsigned char value = 0;
+ unsigned char module = 0xa1 | (slot << 1);
+ /* is the module there? if byte 2 is not 4, then we'll assume it
+ * is useless.
+ */
+ if (smbus_read_byte(module, 2) != 4)
+ goto done;
+
+ //print_err_hex8(slot);
+ // print_err(" is SDRAM\n");
+ width = smbus_read_byte(module, 6) | (smbus_read_byte(module,7)<<0);
+ banks = smbus_read_byte(module, 17);
+ /* we're going to assume symmetric banks. Sorry. */
+ cols = smbus_read_byte(module, 4) & 0xf;
+ rows = smbus_read_byte(module, 3) & 0xf;
+ /* grand total. You have rows+cols addressing, * times of banks, times
+ * width of data in bytes*/
+ /* do this in terms of address bits. Then subtract 23 from it.
+ * That might do it.
+ */
+ value = cols + rows + log2[banks] + log2[width];
+ value -= 23;
+ /* now subtract 3 more bits as these are 8-bit bytes */
+ value -= 3;
+ // print_err_hex8(value);
+ // print_err(" is the # bits for this bank\n");
+ /* now put that size into the correct register */
+ value = (1 << value);
done:
- reg = ramregs[slot];
-
- // print_err_hex8(value); print_err(" would go into ");
- // print_err_hex8(ramregs[reg]); print_err("\n");
- // pci_write_config8(north, ramregs[reg], value);
- return value;
+ reg = ramregs[slot];
+
+ // print_err_hex8(value); print_err(" would go into ");
+ // print_err_hex8(ramregs[reg]); print_err("\n");
+ // pci_write_config8(north, ramregs[reg], value);
+ return value;
}
-static void sdram_set_spd_registers(const struct mem_controller *ctrl) {
- #define T133 7
- unsigned char Trp = 1, Tras = 1, casl = 2, val;
- unsigned char timing = 0xe4;
- /* read Trp */
- val = smbus_read_byte(0xa0, 27);
- if (val < 2*T133)
- Trp = 1;
- val = smbus_read_byte(0xa0, 30);
- if (val < 5*T133)
- Tras = 0;
- val = smbus_read_byte(0xa0, 18);
- if (val < 8)
- casl = 1;
- if (val < 4)
- casl = 0;
-
- val = (Trp << 7) | (Tras << 6) | (casl << 4) | 4;
-
- print_err_hex8(val); print_err(" is the computed timing\n");
- /* don't set it. Experience shows that this screwy chipset should just
- * be run with the most conservative timing.
- * pci_write_config8(0, 0x64, val);
- */
+static void sdram_set_spd_registers(const struct mem_controller *ctrl)
+{
+#define T133 7
+ unsigned char Trp = 1, Tras = 1, casl = 2, val;
+ unsigned char timing = 0xe4;
+ /* read Trp */
+ val = smbus_read_byte(0xa0, 27);
+ if (val < 2*T133)
+ Trp = 1;
+ val = smbus_read_byte(0xa0, 30);
+ if (val < 5*T133)
+ Tras = 0;
+ val = smbus_read_byte(0xa0, 18);
+ if (val < 8)
+ casl = 1;
+ if (val < 4)
+ casl = 0;
+
+ val = (Trp << 7) | (Tras << 6) | (casl << 4) | 4;
+
+ print_err_hex8(val); print_err(" is the computed timing\n");
+ /* don't set it. Experience shows that this screwy chipset should just
+ * be run with the most conservative timing.
+ * pci_write_config8(0, 0x64, val);
+ */
}
-static void sdram_enable(int controllers, const struct mem_controller *ctrl) {
- unsigned char i;
- static const uint16_t raminit_ma_reg_table[] = {
- /* Values for MA type register to try */
- 0x0000, 0x8088, 0xe0ee,
- 0xffff // end mark
- };
- static const uint8_t ramregs[] = {0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
- 0x56, 0x57};
-
- device_t north = 0;
- uint8_t c, r, base;
- /* begin to initialize*/
- // I forget why we need this, but we do
- dimms_write(0xa55a5aa5);
-
- /* set NOP*/
- pci_write_config8(north,0x6C, 0x01);
- print_err("NOP\r\n");
- /* wait 200us*/
- // You need to do the memory reference. That causes the nop cycle.
- dimms_read(0);
- udelay(400);
- print_err("PRECHARGE\r\n");
- /* set precharge */
- pci_write_config8(north,0x6C, 0x02);
- print_err("DUMMY READS\r\n");
- /* dummy reads*/
- dimms_read(0);
- udelay(200);
- print_err("CBR\r\n");
- /* set CBR*/
- pci_write_config8(north,0x6C, 0x04);
+static void sdram_enable(int controllers, const struct mem_controller *ctrl)
+{
+ unsigned char i;
+ static const uint16_t raminit_ma_reg_table[] = {
+ /* Values for MA type register to try */
+ 0x0000, 0x8088, 0xe0ee,
+ 0xffff // end mark
+ };
+ static const uint8_t ramregs[] = {
+ 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f, 0x56, 0x57
+ };
+
+ device_t north = 0;
+ uint8_t c, r, base;
+ /* begin to initialize*/
+ // I forget why we need this, but we do
+ dimms_write(0xa55a5aa5);
- /* do 8 reads and wait >100us between each - from via*/
- dimms_read(0);
- udelay(200);
- dimms_read(0);
- udelay(200);
- dimms_read(0);
- udelay(200);
- dimms_read(0);
- udelay(200);
- dimms_read(0);
- udelay(200);
- dimms_read(0);
- udelay(200);
- dimms_read(0);
- udelay(200);
- dimms_read(0);
- udelay(200);
- print_err("MRS\r\n");
- /* set MRS*/
- pci_write_config8(north,0x6c, 0x03);
+ /* set NOP*/
+ pci_write_config8(north,0x6C, 0x01);
+ print_err("NOP\r\n");
+ /* wait 200us*/
+ // You need to do the memory reference. That causes the nop cycle.
+ dimms_read(0);
+ udelay(400);
+ print_err("PRECHARGE\r\n");
+ /* set precharge */
+ pci_write_config8(north,0x6C, 0x02);
+ print_err("DUMMY READS\r\n");
+ /* dummy reads*/
+ dimms_read(0);
+ udelay(200);
+ print_err("CBR\r\n");
+ /* set CBR*/
+ pci_write_config8(north,0x6C, 0x04);
+
+ /* do 8 reads and wait >100us between each - from via*/
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ dimms_read(0);
+ udelay(200);
+ print_err("MRS\r\n");
+ /* set MRS*/
+ pci_write_config8(north,0x6c, 0x03);
#if DIMM_CL2
- dimms_read(0x150);
+ dimms_read(0x150);
#else // CL=3
- dimms_read(0x1d0);
+ dimms_read(0x1d0);
#endif
- udelay(200);
- print_err("NORMAL\r\n");
- /* set to normal mode */
- pci_write_config8(north,0x6C, 0x08);
-
- dimms_write(0x55aa55aa);
- dimms_read(0);
- udelay(200);
- print_err("set ref. rate\r\n");
- // Set the refresh rate.
+ udelay(200);
+ print_err("NORMAL\r\n");
+ /* set to normal mode */
+ pci_write_config8(north,0x6C, 0x08);
+
+ dimms_write(0x55aa55aa);
+ dimms_read(0);
+ udelay(200);
+ print_err("set ref. rate\r\n");
+ // Set the refresh rate.
#if DIMM_PC133
- pci_write_config8(north,0x6A, 0x86);
+ pci_write_config8(north,0x6A, 0x86);
#else
- pci_write_config8(north,0x6A, 0x65);
+ pci_write_config8(north,0x6A, 0x65);
#endif
- print_err("enable multi-page open\r\n");
- // enable multi-page open
- pci_write_config8(north,0x6B, 0x0d);
-
- /* Begin auto-detection
- * Find the first bank with DIMM equipped. */
-
- /* Maximum possible memory in bank 0, none in other banks.
- * Starting from bank 0, we fill 0 in these registers
- * until memory is found. */
- pci_write_config8(north,0x5A, 0xff);
- pci_write_config8(north,0x5B, 0xff);
- pci_write_config8(north,0x5C, 0xff);
- pci_write_config8(north,0x5D, 0xff);
- pci_write_config8(north,0x5E, 0xff);
- pci_write_config8(north,0x5F, 0xff);
- pci_write_config8(north,0x56, 0xff);
- pci_write_config8(north,0x57, 0xff);
- dumpnorth(north);
- print_err("MA\r\n");
- for(c = 0; c < 8; c++) {
- /* Write different values to 0 and 8, then read from 0.
- * If values of address 0 match, we have something there. */
- print_err("write to 0\r\n");
- *(volatile unsigned long *) 0 = 0x12345678;
-
- /* LEAVE THIS HERE. IT IS ESSENTIAL. OTHERWISE BUFFERING
- * WILL FOOL YOU!
- */
- print_err("write to 8\r\n");
- *(volatile unsigned long *) 8 = 0x87654321;
-
- if (*(volatile unsigned long *) 0 != 0x12345678) {
- print_err("no memory in this bank\r\n");
- /* No memory in this bank. Tell it to the bridge. */
- pci_write_config8(north,ramregs[c], 0);
- }
- /* found something */
- {
- uint8_t best = 0;
-
- /* Detect MA mapping type of the bank. */
-
- for(r = 0; r < 3; r++) {
- volatile unsigned long esi = 0;
- volatile unsigned long eax = 0;
- pci_write_config8(north,0x58, raminit_ma_reg_table[r]);
-
- * (volatile unsigned long *) eax = 0;
- print_err(" done write to eax\r\n");
- // Write to addresses with only one address bit
- // on, from 0x80000000 to 0x00000008 (lower 3 bits
- // are ignored, assuming 64-bit bus). Then what
- // is read at address 0 is the value written to
- // the lowest address where it gets
- // wrap-around. That address is either the size of
- // the bank, or a missing bit due to incorrect MA
- // mapping.
- eax = 0x80000000;
- while (eax != 4) {
- * (volatile unsigned long *) eax = eax;
- //print_err_hex32(eax);
- outb(eax&0xff, 0x80);
- eax >>= 1;
+ print_err("enable multi-page open\r\n");
+ // enable multi-page open
+ pci_write_config8(north,0x6B, 0x0d);
+
+ /* Begin auto-detection
+ * Find the first bank with DIMM equipped. */
+
+ /* Maximum possible memory in bank 0, none in other banks.
+ * Starting from bank 0, we fill 0 in these registers
+ * until memory is found. */
+ pci_write_config8(north,0x5A, 0xff);
+ pci_write_config8(north,0x5B, 0xff);
+ pci_write_config8(north,0x5C, 0xff);
+ pci_write_config8(north,0x5D, 0xff);
+ pci_write_config8(north,0x5E, 0xff);
+ pci_write_config8(north,0x5F, 0xff);
+ pci_write_config8(north,0x56, 0xff);
+ pci_write_config8(north,0x57, 0xff);
+ dumpnorth(north);
+ print_err("MA\r\n");
+ for(c = 0; c < 8; c++) {
+ /* Write different values to 0 and 8, then read from 0.
+ * If values of address 0 match, we have something there. */
+ print_err("write to 0\r\n");
+ *(volatile unsigned long *) 0 = 0x12345678;
+
+ /* LEAVE THIS HERE. IT IS ESSENTIAL. OTHERWISE BUFFERING
+ * WILL FOOL YOU!
+ */
+ print_err("write to 8\r\n");
+ *(volatile unsigned long *) 8 = 0x87654321;
+
+ if (*(volatile unsigned long *) 0 != 0x12345678) {
+ print_err("no memory in this bank\r\n");
+ /* No memory in this bank. Tell it to the bridge. */
+ pci_write_config8(north,ramregs[c], 0);
+ }
+ /* found something */
+ {
+ uint8_t best = 0;
+
+ /* Detect MA mapping type of the bank. */
+
+ for(r = 0; r < 3; r++) {
+ volatile unsigned long esi = 0;
+ volatile unsigned long eax = 0;
+ pci_write_config8(north,0x58, raminit_ma_reg_table[r]);
+
+ * (volatile unsigned long *) eax = 0;
+ print_err(" done write to eax\r\n");
+ // Write to addresses with only one address bit
+ // on, from 0x80000000 to 0x00000008 (lower 3 bits
+ // are ignored, assuming 64-bit bus). Then what
+ // is read at address 0 is the value written to
+ // the lowest address where it gets
+ // wrap-around. That address is either the size of
+ // the bank, or a missing bit due to incorrect MA
+ // mapping.
+ eax = 0x80000000;
+ while (eax != 4) {
+ * (volatile unsigned long *) eax = eax;
+ //print_err_hex32(eax);
+ outb(eax&0xff, 0x80);
+ eax >>= 1;
+ }
+ print_err(" done read to eax\r\n");
+ eax = * (unsigned long *)0;
+ /* oh boy ... what is this.
+ movl 0, %eax
+ cmpl %eax, %esi
+ jnc 3f
+ */
+ print_err("eax and esi: ");
+ print_err_hex32(eax); print_err(" ");
+ print_err_hex32(esi); print_err("\r\n");
+
+ if (eax > esi) { /* ??*/
+
+ // This is the current best MA mapping.
+ // Save the address and its MA mapping value.
+ best = r;
+ esi = eax;
+ }
+ }
+
+ pci_write_config8(north,0x58, raminit_ma_reg_table[best]);
+ print_err("enabled first bank of ram ... ma is ");
+ print_err_hex8(pci_read_config8(north, 0x58));
+ print_err("\r\n");
+ }
}
- print_err(" done read to eax\r\n");
- eax = * (unsigned long *)0;
- /* oh boy ... what is this.
- movl 0, %eax
- cmpl %eax, %esi
- jnc 3f
- */
- print_err("eax and esi: ");
- print_err_hex32(eax); print_err(" ");
- print_err_hex32(esi); print_err("\r\n");
-
- if (eax > esi) { /* ??*/
-
- // This is the current best MA mapping.
- // Save the address and its MA mapping value.
- best = r;
- esi = eax;
+ base = 0;
+ /* runs out of variable space. */
+ /* this is unrolled and constants used as much as possible to help
+ * us not run out of registers.
+ * we'll run out of code space instead :-)
+ */
+ // for(i = 0; i < 8; i++)
+ base = do_module_size(0); /*, base);*/
+ pci_write_config8(north, ramregs[0], base);
+ base = do_module_size(1); /*, base);*/
+ base += pci_read_config8(north, ramregs[0]);
+ pci_write_config8(north, ramregs[1], base);
+ /* runs out of code space. */
+ for(i = 0; i < 8; i++){
+ pci_write_config8(north, ramregs[i], base);
+ /*
+ pci_write_config8(north, ramregs[3], base);
+ pci_write_config8(north, ramregs[4], base);
+ pci_write_config8(north, ramregs[5], base);
+ pci_write_config8(north, ramregs[6], base);
+ pci_write_config8(north, ramregs[7], base);
+ */
}
- }
-
- pci_write_config8(north,0x58, raminit_ma_reg_table[best]);
- print_err("enabled first bank of ram ... ma is ");
- print_err_hex8(pci_read_config8(north, 0x58));
- print_err("\r\n");
- }
- }
- base = 0;
- /* runs out of variable space. */
- /* this is unrolled and constants used as much as possible to help
- * us not run out of registers.
- * we'll run out of code space instead :-)
- */
- // for(i = 0; i < 8; i++)
- base = do_module_size(0); /*, base);*/
- pci_write_config8(north, ramregs[0], base);
- base = do_module_size(1); /*, base);*/
- base += pci_read_config8(north, ramregs[0]);
- pci_write_config8(north, ramregs[1], base);
- /* runs out of code space. */
- for(i = 0; i < 8; i++){
- pci_write_config8(north, ramregs[i], base);
- /*
- pci_write_config8(north, ramregs[3], base);
- pci_write_config8(north, ramregs[4], base);
- pci_write_config8(north, ramregs[5], base);
- pci_write_config8(north, ramregs[6], base);
- pci_write_config8(north, ramregs[7], base);
- */
- }
- /*
- base = do_module_size(0xa0, base);
- base = do_module_size(0xa0, base);
- base = do_module_size(0xa0, base);
- base = do_module_size(0xa0, base);
- base = do_module_size(0xa0, base);
- base = do_module_size(0xa0, base);*/
- print_err("vt8601 done\n");
- dumpnorth(north);
- udelay(1000);
+ /*
+ base = do_module_size(0xa0, base);
+ base = do_module_size(0xa0, base);
+ base = do_module_size(0xa0, base);
+ base = do_module_size(0xa0, base);
+ base = do_module_size(0xa0, base);
+ base = do_module_size(0xa0, base);*/
+ print_err("vt8601 done\n");
+ dumpnorth(north);
+ udelay(1000);
}
diff --git a/src/northbridge/via/vt8601/raminit.h b/src/northbridge/via/vt8601/raminit.h
index a72535de1d..b6d2339df3 100644
--- a/src/northbridge/via/vt8601/raminit.h
+++ b/src/northbridge/via/vt8601/raminit.h
@@ -2,7 +2,7 @@
#define RAMINIT_H
struct mem_controller {
- int empty;
+ int empty;
};
#endif /* RAMINIT_H */