diff options
| author | Uwe Hermann <uwe@hermann-uwe.de> | 2010-11-20 20:23:08 +0000 |
|---|---|---|
| committer | Uwe Hermann <uwe@hermann-uwe.de> | 2010-11-20 20:23:08 +0000 |
| commit | d773fd370a92a6da2f7dbf91c085eb0df1f6f30d (patch) | |
| tree | fdaa9bd6278f4772c318d105e92a7cfdbc884521 /src/northbridge/via/vt8601 | |
| parent | 9bd9a90d6a0a47ede6286e2c5599ae7335e4b96a (diff) | |
Some more DIMM0 related cleanups and deduplication.
- VIA VT8235: Do the shift in smbus_read_byte() as all other chipsets do.
- spd.h: Move RC00-RC63 #defines here, they were duplicated in lots of
romstage.c files and lots of spd_addr.h files. Don't even bother for
those spd_addr.h which aren't even actually used, drop them right away.
- Replace various 0x50 hardcoded numbers with DIMM0, 0x51 with DIMM1,
and 0xa0 with (DIMM0 << 1) where appropriate.
- Various debug.c files: Replace SMBUS_MEM_DEVICE_START with DIMM0,
SMBUS_MEM_DEVICE_END with DIMM7, and drop useless SMBUS_MEM_DEVICE_INC.
- VIA VX800: Drop unused SMBUS_ADDR_CH* #defines.
- VIA VT8623: Do the shift in smbus_read_byte() as all other chipsets do.
Then, replace 0xa0 (which now becomes 0x50) with DIMM0.
- alix1c/romstage.c, alix2d/romstage.c: Adapt to recent bit shift changes.
- Various files: Drop DIMM_SPD_BASE and/or replace it with DIMM0.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Patrick Georgi <patrick@georgi-clan.de>
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6100 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/via/vt8601')
| -rw-r--r-- | src/northbridge/via/vt8601/raminit.c | 16 |
1 files changed, 9 insertions, 7 deletions
diff --git a/src/northbridge/via/vt8601/raminit.c b/src/northbridge/via/vt8601/raminit.c index f1ebbe5338..5e7611a3c0 100644 --- a/src/northbridge/via/vt8601/raminit.c +++ b/src/northbridge/via/vt8601/raminit.c @@ -34,6 +34,8 @@ it with the version available from LANL. */ /* converted to C 9/2003 Ron Minnich */ +#include <spd.h> + /* Set to 1 if your DIMMs are PC133 Note that I'm assuming CPU's FSB * frequency is 133MHz. If your CPU runs at another bus speed, you * might need to change some of register values. @@ -178,8 +180,8 @@ static unsigned long spd_module_size(unsigned char slot) /* we may run out of registers ... */ unsigned int banks, rows, cols; unsigned int value = 0; - /* unsigned int module = ((0x50 + slot) << 1) + 1; */ - unsigned int module = 0x50 + slot; + /* unsigned int module = ((DIMM0 + slot) << 1) + 1; */ + unsigned int module = DIMM0 + slot; /* is the module there? if byte 2 is not 4, then we'll assume it * is useless. @@ -220,7 +222,7 @@ static unsigned long spd_module_size(unsigned char slot) #if 0 static int spd_num_chips(unsigned char slot) { - unsigned int module = 0x50 + slot; + unsigned int module = DIMM0 + slot; unsigned int width; width = smbus_read_byte(module, 13); @@ -236,13 +238,13 @@ static void sdram_set_spd_registers(const struct mem_controller *ctrl) unsigned char Trp = 1, Tras = 1, casl = 2, val; unsigned char timing = 0xe4; /* read Trp */ - val = smbus_read_byte(0x50, 27); + val = smbus_read_byte(DIMM0, 27); if (val < 2 * T133) Trp = 1; - val = smbus_read_byte(0x50, 30); + val = smbus_read_byte(DIMM0, 30); if (val < 5 * T133) Tras = 0; - val = smbus_read_byte(0x50, 18); + val = smbus_read_byte(DIMM0, 18); if (val < 8) casl = 1; if (val < 4) @@ -366,7 +368,7 @@ static void sdram_enable(int controllers, const struct mem_controller *ctrl) continue; /* Read the row densities */ - size = smbus_read_byte(0x50+slot, 0x1f); + size = smbus_read_byte(DIMM0 + slot, 0x1f); /* Set the MA map type. * |