diff options
| author | Duncan Laurie <dlaurie@chromium.org> | 2013-03-08 17:00:37 -0800 |
|---|---|---|
| committer | Ronald G. Minnich <rminnich@gmail.com> | 2013-03-21 23:11:25 +0100 |
| commit | 467f31de92ca2ed9df1530270e9aabdd69fe8f88 (patch) | |
| tree | 61092ad464c81d2f69cc66fc27e2db1ccb2df710 /src/northbridge/intel | |
| parent | 7922b468b51eea58c7238f11b21820b8d3747d6b (diff) | |
haswell/lynxpoint: Use new PCH/PM helper functions
This makes use of the new functions from pmutil.c that take
care of the differences between -H and -LP chipsets.
It also adds support for the LynxPoint-LP GPE0 register block
and the SMI/SCI routing differences.
The FADT is updated to report the new 256 byte GPE0 block on
wtm2/wtm2 boards which is too big for the 64bit X_GPE0 address
block so that part is zeroed to prevent IASL and the kernel
from complaining about a mismatch.
This was tested on WTM2. Unfortunately I am still unable to get an
SCI delivered from the EC but I suspect that is due to a magic
command needed to put the EC in ACPI mode. Instead I verified that
all of the power management and GPIO registers were set to expected
values.
I also tested transitions into S3 and S5 from both the kernel and
by pressing the power button at the developer mode screen and they
all function as expected.
Change-Id: Ice9e798ea5144db228349ce90540745c0780b20a
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: http://review.coreboot.org/2816
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Diffstat (limited to 'src/northbridge/intel')
| -rw-r--r-- | src/northbridge/intel/haswell/acpi.c | 13 |
1 files changed, 4 insertions, 9 deletions
diff --git a/src/northbridge/intel/haswell/acpi.c b/src/northbridge/intel/haswell/acpi.c index e4d86be27f..81da086e01 100644 --- a/src/northbridge/intel/haswell/acpi.c +++ b/src/northbridge/intel/haswell/acpi.c @@ -182,17 +182,12 @@ int init_igd_opregion(igd_opregion_t *opregion) pci_write_config16(igd, SWSCI, reg16); /* clear dmisci status */ - reg16 = inw(DEFAULT_PMBASE + TCO1_STS); + reg16 = inw(get_pmbase() + TCO1_STS); reg16 |= DMISCI_STS; // reference code does an &= - outw(DEFAULT_PMBASE + TCO1_STS, reg16); + outw(get_pmbase() + TCO1_STS, reg16); - /* clear acpi tco status */ - outl(DEFAULT_PMBASE + GPE0_STS, TCOSCI_STS); - - /* enable acpi tco scis */ - reg16 = inw(DEFAULT_PMBASE + GPE0_EN); - reg16 |= TCOSCI_EN; - outw(DEFAULT_PMBASE + GPE0_EN, reg16); + /* clear and enable ACPI TCO SCI */ + enable_tco_sci(); return 0; } |