summaryrefslogtreecommitdiff
path: root/src/northbridge/intel
diff options
context:
space:
mode:
authorElia Yehuda <z4ziggy@gmail.com>2008-11-21 17:14:40 +0000
committerUwe Hermann <uwe@hermann-uwe.de>2008-11-21 17:14:40 +0000
commitd24fe7e80ede60847afaa2ae30692b072ea06eda (patch)
tree51bf0082424ac42d16dda34739e2ea815348e639 /src/northbridge/intel
parent4cf5ecf39d58751cbddbbeb3133886acaecc9550 (diff)
i810: Add support for multiple DIMMs, both single-sided and double-sided,
as well as most (all?) combinations thereof. Drop some unused code, the unused row_offset variable, and obsolete comments. Also, fix a typo (thanks to Stefan Reinauer for noticing). This is tested on the MSI MS-6178 with a number of different DIMM combinations and so far all of them worked fine. Signed-off-by: Elia Yehuda <z4ziggy@gmail.com> Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@3765 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/intel')
-rw-r--r--src/northbridge/intel/i82810/raminit.c186
1 files changed, 103 insertions, 83 deletions
diff --git a/src/northbridge/intel/i82810/raminit.c b/src/northbridge/intel/i82810/raminit.c
index ecfa7c311f..0b3e965192 100644
--- a/src/northbridge/intel/i82810/raminit.c
+++ b/src/northbridge/intel/i82810/raminit.c
@@ -1,8 +1,9 @@
/*
* This file is part of the coreboot project.
*
- * Copyright (C) 2007 Uwe Hermann <uwe@hermann-uwe.de>
+ * Copyright (C) 2007-2008 Uwe Hermann <uwe@hermann-uwe.de>
* Copyright (C) 2007 Corey Osgood <corey@slightlyhackish.com>
+ * Copyright (C) 2008 Elia Yehuda <z4ziggy@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -55,6 +56,22 @@ Macros and definitions.
#define RAM_COMMAND_MRS 0x6 /* Mode register set */
#define RAM_COMMAND_CBR 0x7 /* CBR */
+/*
+ * Table which returns the RAM size in MB when fed the DRP[7:4] or [3:0] value.
+ * Note that 2 is a value which the DRP should never be programmed to.
+ * Some size values appear twice, due to single-sided vs dual-sided banks.
+ */
+static const u16 translate_i82810_to_mb[] = {
+/* DRP 0 1 (2) 3 4 5 6 7 8 9 A B C D E F */
+/* MB */0, 8, 0, 16, 16, 24, 32, 32, 48, 64, 64, 96, 128, 128, 192, 256,
+};
+
+/* Size of bank#0 for dual-sided DIMMs */
+static const u8 translate_i82810_to_bank[] = {
+/* DRP 0 1 (2) 3 4 5 6 7 8 9 A B C D E F */
+/* MB */0, 0, 0, 8, 0, 16, 16, 0, 32, 32, 0, 64, 64, 0, 128, 128,
+};
+
/*-----------------------------------------------------------------------------
SDRAM configuration functions.
-----------------------------------------------------------------------------*/
@@ -62,35 +79,87 @@ SDRAM configuration functions.
/**
* Send the specified RAM command to all DIMMs.
*
- * @param TODO
- * @param TODO
+ * @param The RAM command to send to the DIMM(s).
*/
-static void do_ram_command(uint32_t command, uint32_t addr_offset,
- uint32_t row_offset)
+static void do_ram_command(u8 command)
{
- uint8_t reg;
-
- /* TODO: Support for multiple DIMMs. */
+ u32 addr, addr_offset;
+ u16 dimm_size, dimm_start, dimm_bank;
+ u8 reg8, drp;
+ int i, caslatency;
/* Configure the RAM command. */
- reg = pci_read_config8(PCI_DEV(0, 0, 0), DRAMT);
- reg &= 0x1f; /* Clear bits 7-5. */
- reg |= command << 5;
- pci_write_config8(PCI_DEV(0, 0, 0), DRAMT, reg);
-
- /* RAM_COMMAND_NORMAL affects only the memory controller and
- doesn't need to be "sent" to the DIMMs. */
- /* if (command == RAM_COMMAND_NORMAL) return; */
-
- PRINT_DEBUG(" Sending RAM command 0x");
- PRINT_DEBUG_HEX8(reg);
- PRINT_DEBUG(" to 0x");
- PRINT_DEBUG_HEX32(0 + addr_offset); // FIXME
- PRINT_DEBUG("\r\n");
-
- /* Read from (DIMM start address + addr_offset). */
- read32(0 + addr_offset); //first offset is always 0
- read32(row_offset + addr_offset);
+ reg8 = pci_read_config8(PCI_DEV(0, 0, 0), DRAMT);
+ reg8 &= 0x1f; /* Clear bits 7-5. */
+ reg8 |= command << 5;
+ pci_write_config8(PCI_DEV(0, 0, 0), DRAMT, reg8);
+
+ /*
+ * RAM_COMMAND_NORMAL affects only the memory controller and
+ * doesn't need to be "sent" to the DIMMs.
+ */
+ if (command == RAM_COMMAND_NORMAL)
+ return;
+
+ dimm_start = 0;
+ for (i = 0; i < DIMM_SOCKETS; i++) {
+ /*
+ * Calculate the address offset where we need to "send" the
+ * DIMM command to. For most commands the offset is 0, only
+ * RAM_COMMAND_MRS needs special values, see below.
+ * The final address offset bits depend on three things:
+ *
+ * (1) Some hardcoded values specified in the datasheet.
+ * (2) Which CAS latency we will use/set. This is the SMAA[4]
+ * bit, which is 1 for CL3, and 0 for CL2. The bitstring
+ * so far has the form '00000001X1010', X being SMAA[4].
+ * (3) The DIMM to which we want to send the command. For
+ * DIMM0 no special handling is needed, but for DIMM1 we
+ * must invert the four bits SMAA[7:4] (see datasheet).
+ *
+ * Finally, the bitstring has to be shifted 3 bits to the left.
+ * See i810 datasheet pages 43, 85, and 86 for details.
+ */
+ addr_offset = 0;
+ caslatency = 3; /* TODO: Dynamically get CAS latency later. */
+ if (i == 0 && command == RAM_COMMAND_MRS && caslatency == 3)
+ addr_offset = 0x1d0; /* DIMM0, CL3, 0000111010000 */
+ if (i == 1 && command == RAM_COMMAND_MRS && caslatency == 3)
+ addr_offset = 0x650; /* DIMM1, CL3, 0011001010000 */
+ if (i == 0 && command == RAM_COMMAND_MRS && caslatency == 2)
+ addr_offset = 0x150; /* DIMM0, CL2, 0000101010000 */
+ if (i == 1 && command == RAM_COMMAND_MRS && caslatency == 2)
+ addr_offset = 0x1a0; /* DIMM1, CL2, 0000110100000 */
+
+ drp = pci_read_config8(PCI_DEV(0, 0, 0), DRP);
+ drp = (drp >> (i * 4)) & 0x0f;
+
+ dimm_size = translate_i82810_to_mb[drp];
+ addr = (dimm_start * 1024 * 1024) + addr_offset;
+ if (dimm_size) {
+ PRINT_DEBUG(" Sending RAM command 0x");
+ PRINT_DEBUG_HEX8(reg8);
+ PRINT_DEBUG(" to 0x");
+ PRINT_DEBUG_HEX32(addr);
+ PRINT_DEBUG("\r\n");
+
+ read32(addr);
+ }
+
+ dimm_bank = translate_i82810_to_bank[drp];
+ addr = ((dimm_start + dimm_bank) * 1024 * 1024) + addr_offset;
+ if (dimm_bank) {
+ PRINT_DEBUG(" Sending RAM command 0x");
+ PRINT_DEBUG_HEX8(reg8);
+ PRINT_DEBUG(" to 0x");
+ PRINT_DEBUG_HEX32(addr);
+ PRINT_DEBUG("\r\n");
+
+ read32(addr);
+ }
+
+ dimm_start += dimm_size;
+ }
}
/*-----------------------------------------------------------------------------
@@ -100,7 +169,7 @@ DIMM-independant configuration functions.
/*
* Set DRP - DRAM Row Population Register (Device 0).
*/
-static void spd_set_dram_size(uint32_t row_offset)
+static void spd_set_dram_size(void)
{
/* The variables drp and dimm_size have to be ints since all the
* SMBus-related functions return ints, and its just easier this way.
@@ -137,36 +206,6 @@ static void spd_set_dram_size(uint32_t row_offset)
dimm_size = 32;
}
- /* Set the row offset, in KBytes (should this be
- * Kbits?). Note that this offset is the start of the
- * next row.
- */
- row_offset = (dimm_size * 4 * 1024);
-
- /* This is the way I was doing this, it's provided
- * mainly as an alternative to the "new" way.
- */
-
-#if 0
- /* 8MB */
- if (dimm_size == 0x2)
- dimm_size = 0x1;
- /* 16MB */
- else if (dimm_size == 0x4)
- dimm_size = 0x4;
- /* 32MB */
- else if (dimm_size == 0x8)
- dimm_size = 0x7;
- /* 64 MB */
- else if (dimm_size == 0x10)
- dimm_size = 0xa;
- /* 128 MB */
- else if (dimm_size == 0x20)
- dimm_size = 0xd;
- else
- print_debug("Ram Size not supported\r\n");
-#endif
-
/* This array is provided in raminit.h, because it got
* extremely messy. The above way is cleaner, but
* doesn't support any asymetrical/odd configurations.
@@ -212,7 +251,7 @@ static void set_dram_timing(void)
/*
* TODO: BUFF_SC needs to be set according to the DRAM tech (x8, x16,
- * or x32), but the datasheet doesn't list all the detaisl. Currently, it
+ * or x32), but the datasheet doesn't list all the details. Currently, it
* needs to be pulled from the output of 'lspci -xxx Rx92'.
*
* Common results (tested on actual hardware) are:
@@ -246,9 +285,6 @@ static void set_dram_buffer_strength(void)
Public interface.
-----------------------------------------------------------------------------*/
-/**
- * TODO.
- */
static void sdram_set_registers(void)
{
unsigned long val;
@@ -292,16 +328,10 @@ static void sdram_set_registers(void)
//pci_write_config8(PCI_DEV(0, 0, 0), MISSC2, val);
}
-/**
- * TODO.
- */
static void sdram_set_spd_registers(void)
{
- /* spd_set_dram_size() moved into sdram_enable() to prevent having
- * to pass a variable between here and there.
- */
+ spd_set_dram_size();
set_dram_buffer_strength();
-
set_dram_timing();
}
@@ -312,41 +342,31 @@ static void sdram_enable(void)
{
int i;
- /* Todo: this will currently work with either one dual sided or two
- * single sided DIMMs. Needs to work with 2 dual sided DIMMs in the
- * long run.
- */
- uint32_t row_offset;
-
- spd_set_dram_size(row_offset);
-
/* 1. Apply NOP. */
PRINT_DEBUG("RAM Enable 1: Apply NOP\r\n");
- do_ram_command(RAM_COMMAND_NOP, 0, row_offset);
+ do_ram_command(RAM_COMMAND_NOP);
udelay(200);
/* 2. Precharge all. Wait tRP. */
PRINT_DEBUG("RAM Enable 2: Precharge all\r\n");
- do_ram_command(RAM_COMMAND_PRECHARGE, 0, row_offset);
+ do_ram_command(RAM_COMMAND_PRECHARGE);
udelay(1);
/* 3. Perform 8 refresh cycles. Wait tRC each time. */
PRINT_DEBUG("RAM Enable 3: CBR\r\n");
- do_ram_command(RAM_COMMAND_CBR, 0, row_offset);
for (i = 0; i < 8; i++) {
- read32(0);
- read32(row_offset);
+ do_ram_command(RAM_COMMAND_CBR);
udelay(1);
}
/* 4. Mode register set. Wait two memory cycles. */
PRINT_DEBUG("RAM Enable 4: Mode register set\r\n");
- do_ram_command(RAM_COMMAND_MRS, 0x1d0, row_offset);
+ do_ram_command(RAM_COMMAND_MRS);
udelay(2);
/* 5. Normal operation (enables refresh) */
PRINT_DEBUG("RAM Enable 5: Normal operation\r\n");
- do_ram_command(RAM_COMMAND_NORMAL, 0, row_offset);
+ do_ram_command(RAM_COMMAND_NORMAL);
udelay(1);
PRINT_DEBUG("Northbridge following SDRAM init:\r\n");