nb/i945/gma.c: Refactor panel setup

This reuses some of gm45 code to set up the panel.

Panel start and stop delays and pwm frequency can now be set in
devicetree.

Linux does not make the difference between 945gm and gm45
for panel delays, so it is safe to assume the semantics of those
registers are the same.

The core display clock is computed according to "Mobile Intel® 945
Express Chipset Family" Datasheet.

This selects Legacy backlight mode since most targets have some smm
code that rely on this.

This sets the same backlight frequency as vendor bios on Thinkpad X60
and T60.

A default of 180Hz is selected for the PWM frequency if it is not
defined in the devicetree, this might be annoying for displays that
are LED backlit, but is a safe value for CCFL backlit displays.

Change-Id: I1c47b68eecc19624ee534598c22da183bc89425d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/18141
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Nico Huber <nico.h@gmx.de>

1 files changed, 62 insertions, 5 deletions

diff --git a/src/northbridge/intel/i945/gma.c b/src/northbridge/intel/i945/gma.c
index eac8717cde..e3fe0973f7 100644
--- a/src/northbridge/intel/i945/gma.c
+++ b/src/northbridge/intel/i945/gma.c
@@ -47,6 +47,8 @@
 
 #define BASE_FREQUENCY 100000
 
+#define DEFAULT_BLC_PWM 180
+
 static int gtt_setup(u8 *mmiobase)
 {
 	unsigned long PGETBL_save;
@@ -134,8 +136,6 @@ static int intel_gma_init_lvds(struct northbridge_intel_i945_config *conf,
 		write32(mmiobase + RENDER_RING_BASE + i, 0);
 	for (i = 0; i < 0x20; i += 4)
 		write32(mmiobase + FENCE_REG_965_0 + i, 0);
-	write32(mmiobase + PP_ON_DELAYS, 0);
-	write32(mmiobase + PP_OFF_DELAYS, 0);
 
 	/* Disable VGA.  */
 	write32(mmiobase + VGACNTRL, VGA_DISP_DISABLE);
@@ -292,9 +292,6 @@ static int intel_gma_init_lvds(struct northbridge_intel_i945_config *conf,
 	write32(mmiobase + DSPSIZE(0), (hactive - 1) | ((vactive - 1) << 16));
 	write32(mmiobase + DSPPOS(0), 0);
 
-	/* Backlight init. */
-	write32(mmiobase + BLC_PWM_CTL, conf->gpu_backlight);
-
 	edid.bytes_per_line = (edid.bytes_per_line + 63) & ~63;
 	write32(mmiobase + DSPADDR(0), 0);
 	write32(mmiobase + DSPSURF(0), 0);
@@ -571,6 +568,62 @@ static int probe_edid(u8 *mmiobase, u8 slave)
 	return 1;
 }
 
+static u32 get_cdclk(struct device *const dev)
+{
+	u16 gcfgc = pci_read_config16(dev, GCFGC);
+
+	if (gcfgc & GC_LOW_FREQUENCY_ENABLE) {
+		return 133333333;
+	} else {
+		switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
+		case GC_DISPLAY_CLOCK_333_320_MHZ:
+			return 320000000;
+		default:
+		case GC_DISPLAY_CLOCK_190_200_MHZ:
+			return 200000000;
+		}
+	}
+}
+
+static u32 freq_to_blc_pwm_ctl(struct device *const dev, u16 pwm_freq)
+{
+	u32 blc_mod;
+
+	/* Set duty cycle to 100% due to use of legacy backlight control */
+	blc_mod = get_cdclk(dev) / (32 * pwm_freq);
+	return BLM_LEGACY_MODE | ((blc_mod / 2) << 17) | ((blc_mod / 2) << 1);
+}
+
+
+static void panel_setup(u8 *mmiobase, struct device *const dev)
+{
+	const struct northbridge_intel_i945_config *const conf = dev->chip_info;
+
+	u32 reg32;
+
+	/* Set up Panel Power On Delays */
+	reg32 = (conf->gpu_panel_power_up_delay & 0x1fff) << 16;
+	reg32 |= (conf->gpu_panel_power_backlight_on_delay & 0x1fff);
+	write32(mmiobase + PP_ON_DELAYS, reg32);
+
+	/* Set up Panel Power Off Delays */
+	reg32 = (conf->gpu_panel_power_down_delay & 0x1fff) << 16;
+	reg32 |= (conf->gpu_panel_power_backlight_off_delay & 0x1fff);
+	write32(mmiobase + PP_OFF_DELAYS, reg32);
+
+	/* Set up Panel Power Cycle Delay */
+	reg32 = (get_cdclk(dev) / 20000 - 1) << PP_REFERENCE_DIVIDER_SHIFT;
+	reg32 |= conf->gpu_panel_power_cycle_delay & 0x1f;
+	write32(mmiobase + PP_DIVISOR, reg32);
+
+	/* Backlight init. */
+	if (conf->pwm_freq)
+		write32(mmiobase + BLC_PWM_CTL, freq_to_blc_pwm_ctl(dev,
+							conf->pwm_freq));
+	else
+		write32(mmiobase + BLC_PWM_CTL, freq_to_blc_pwm_ctl(dev,
+							DEFAULT_BLC_PWM));
+}
 
 static void gma_func0_init(struct device *dev)
 {
@@ -605,6 +658,10 @@ static void gma_func0_init(struct device *dev)
 			);
 
 		int err;
+
+		if (IS_ENABLED(CONFIG_NORTHBRIDGE_INTEL_SUBTYPE_I945GM))
+			panel_setup(mmiobase, dev);
+
 		/* probe if VGA is connected and always run */
 		/* VGA init if no LVDS is connected */
 		if (!probe_edid(mmiobase, 3) || probe_edid(mmiobase, 2))