nb/intel/hsw,soc/intel/{bdw,skl,apl},mb/*: unify dt panel settings

There are multiple different devicetree setting formats for graphics
panel settings present in coreboot. Replace the ones for the platforms
that already have (mostly) unified gma/graphics setup code by a unified
struct in the gma driver. Hook it up in HSW, BDW, SKL, and APL and adapt
the devicetrees accordingly.

Always ensure that values don't overflow by applying appropriate masks.

The remaining platforms implementing panel settings (GM45, i945, ILK and
SNB) can be migrated later after unifying their gma/graphics setup code.

Signed-off-by: Michael Niewöhner <foss@mniewoehner.de>
Change-Id: I445defe01d5fbf9a69cf05cf1b5bd6c7c2c1725e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48885
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>

2 files changed, 14 insertions, 22 deletions

diff --git a/src/northbridge/intel/haswell/chip.h b/src/northbridge/intel/haswell/chip.h
index b1c8d37a74..99102b6770 100644
--- a/src/northbridge/intel/haswell/chip.h
+++ b/src/northbridge/intel/haswell/chip.h
@@ -3,7 +3,7 @@
 #ifndef NORTHBRIDGE_INTEL_HASWELL_CHIP_H
 #define NORTHBRIDGE_INTEL_HASWELL_CHIP_H
 
-#include <drivers/intel/gma/i915.h>
+#include <drivers/intel/gma/gma.h>
 
 /*
  * Digital Port Hotplug Enable:
@@ -17,17 +17,8 @@ struct northbridge_intel_haswell_config {
 	u8 gpu_dp_c_hotplug; /* Digital Port C Hotplug Config */
 	u8 gpu_dp_d_hotplug; /* Digital Port D Hotplug Config */
 
-	u16 gpu_panel_power_cycle_delay_ms;          /* T4 time sequence */
-	u16 gpu_panel_power_up_delay_ms;            /* T1+T2 time sequence */
-	u16 gpu_panel_power_down_delay_ms;          /* T3 time sequence */
-	u16 gpu_panel_power_backlight_on_delay_ms;  /* T5 time sequence */
-	u16 gpu_panel_power_backlight_off_delay_ms; /* Tx time sequence */
-
-	unsigned int gpu_pch_backlight_pwm_hz;
-	enum {
-		GPU_BACKLIGHT_POLARITY_HIGH = 0,
-		GPU_BACKLIGHT_POLARITY_LOW,
-	} gpu_pch_backlight_polarity;
+	/* IGD panel configuration */
+	struct i915_gpu_panel_config panel_cfg;
 
 	bool gpu_ddi_e_connected;
 
diff --git a/src/northbridge/intel/haswell/gma.c b/src/northbridge/intel/haswell/gma.c
index 7adcfdaa5c..21053ec1c0 100644
--- a/src/northbridge/intel/haswell/gma.c
+++ b/src/northbridge/intel/haswell/gma.c
@@ -243,6 +243,7 @@ static void init_display_planes(void)
 static void gma_setup_panel(struct device *dev)
 {
 	struct northbridge_intel_haswell_config *conf = config_of(dev);
+	const struct i915_gpu_panel_config *panel_cfg = &conf->panel_cfg;
 	u32 reg32;
 
 	/* Setup Digital Port Hotplug */
@@ -257,30 +258,30 @@ static void gma_setup_panel(struct device *dev)
 	/* Setup Panel Power On Delays */
 	reg32 = gtt_read(PCH_PP_ON_DELAYS);
 	if (!reg32) {
-		reg32 |= ((conf->gpu_panel_power_up_delay_ms * 10) & 0x1fff) << 16;
-		reg32 |= (conf->gpu_panel_power_backlight_on_delay_ms * 10) & 0x1fff;
+		reg32 |= ((panel_cfg->up_delay_ms * 10) & 0x1fff) << 16;
+		reg32 |= (panel_cfg->backlight_on_delay_ms * 10) & 0x1fff;
 		gtt_write(PCH_PP_ON_DELAYS, reg32);
 	}
 
 	/* Setup Panel Power Off Delays */
 	reg32 = gtt_read(PCH_PP_OFF_DELAYS);
 	if (!reg32) {
-		reg32 = ((conf->gpu_panel_power_down_delay_ms * 10) & 0x1fff) << 16;
-		reg32 |= (conf->gpu_panel_power_backlight_off_delay_ms * 10) & 0x1fff;
+		reg32 = ((panel_cfg->down_delay_ms * 10) & 0x1fff) << 16;
+		reg32 |= (panel_cfg->backlight_off_delay_ms * 10) & 0x1fff;
 		gtt_write(PCH_PP_OFF_DELAYS, reg32);
 	}
 
 	/* Setup Panel Power Cycle Delay */
-	if (conf->gpu_panel_power_cycle_delay_ms) {
+	if (panel_cfg->cycle_delay_ms) {
 		reg32 = gtt_read(PCH_PP_DIVISOR);
 		reg32 &= ~0x1f;
-		reg32 |= (DIV_ROUND_UP(conf->gpu_panel_power_cycle_delay_ms, 100) + 1) & 0x1f;
+		reg32 |= (DIV_ROUND_UP(panel_cfg->cycle_delay_ms, 100) + 1) & 0x1f;
 		gtt_write(PCH_PP_DIVISOR, reg32);
 	}
 
 	/* Enforce the PCH PWM function, as so does Linux.
 	   The CPU PWM controls are disabled after reset.  */
-	if (conf->gpu_pch_backlight_pwm_hz) {
+	if (panel_cfg->backlight_pwm_hz) {
 		/* Reference clock is either 24MHz or 135MHz. We can choose
 		   either a 16 or a 128 step increment. Use 16 if we would
 		   have less than 100 steps otherwise. */
@@ -290,7 +291,7 @@ static void gma_setup_panel(struct device *dev)
 		u32 south_chicken2;
 
 		south_chicken2 = gtt_read(SOUTH_CHICKEN2);
-		if (conf->gpu_pch_backlight_pwm_hz > hz_limit) {
+		if (panel_cfg->backlight_pwm_hz > hz_limit) {
 			pwm_increment = 16;
 			south_chicken2 |= LPT_PWM_GRANULARITY;
 		} else {
@@ -299,7 +300,7 @@ static void gma_setup_panel(struct device *dev)
 		}
 		gtt_write(SOUTH_CHICKEN2, south_chicken2);
 
-		pwm_period = refclock / pwm_increment / conf->gpu_pch_backlight_pwm_hz;
+		pwm_period = refclock / pwm_increment / panel_cfg->backlight_pwm_hz;
 		printk(BIOS_INFO,
 			"GMA: Setting backlight PWM frequency to %uMHz / %u / %u = %uHz\n",
 			refclock / MHz, pwm_increment, pwm_period,
@@ -309,7 +310,7 @@ static void gma_setup_panel(struct device *dev)
 		gtt_write(BLC_PWM_PCH_CTL2, pwm_period << 16 | pwm_period / 2);
 
 		gtt_write(BLC_PWM_PCH_CTL1,
-			(conf->gpu_pch_backlight_polarity == GPU_BACKLIGHT_POLARITY_LOW) << 29 |
+			(panel_cfg->backlight_polarity == GPU_BACKLIGHT_POLARITY_LOW) << 29 |
 			BLM_PCH_OVERRIDE_ENABLE | BLM_PCH_PWM_ENABLE);
 	}