fox_wtm2: First step support for coreboot-based graphics startup

This code is the initial version of FUI for haswell and wtm2.

The code is simplified from before in many ways. I've gotten rid of
the opcode table, because it obscured meaning and I don't think it is
needed any more. Register sets, mainly used for reset, are just lines
of code -- not many of them. There are a bunch of not-yet-documented
registers here; the VBIOS seemed to think they were necessary and
testing shows they seem to be right.

As a bit of added paranoia, we always include the VBIOS code as our
emergency recovery path. You have to run it now anyways, so this is no
regression from our current situation; and, if all goes well, in a
week (or so), you'll never have to run it again, but like the Force
and nose hair, it will be with you always.

The code can return in three ways. The first, best way is success:
panel is up and the VBIOS need not run. The second mode is that we
tried to light up the panel but could not, for some reason, but will
return with the panel partly up. In this case, it's ok not to power
cycle the panel. The third, worst case, which will NEVER happen, ha
ha, is that we have to turn the panel off and wait the required 600ms
for it to cycle. Life sucks sometimes. This failure mode is in the
'hang on we're going to fix it' category now that we have ramstage in
RW.

The Big Goal here is to create something other coreboot ports can use
as well. The guys doing the x60 report that the link FUI works,
without too many mods, on that chipset, so it seems Intel is keeping
things from changing too much over time.

Also, again, please note: this and the next 3 versions will ALWAYS fail.
The goal is to verify the correctness of the recovery path.

The bizarre tab-space formatting in drm_dp_helper.h is from the original,
as in i915_reg.h

Change-Id: I6ecf454633029d185c29d470980b5a0f3114a8ce
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Signed-off-by: Gabe Black <gabeblack@chromium.org>
Reviewed-on: http://review.coreboot.org/3635
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>

1 files changed, 239 insertions, 0 deletions

diff --git a/src/northbridge/intel/haswell/drm_dp_helper.h b/src/northbridge/intel/haswell/drm_dp_helper.h
new file mode 100644
index 0000000000..f2e06c33f3
--- /dev/null
+++ b/src/northbridge/intel/haswell/drm_dp_helper.h
@@ -0,0 +1,239 @@
+/*
+ * Copyright 2013 Google Inc.
+ * Copyright © 2008 Keith Packard
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission.  The copyright holders make no representations
+ * about the suitability of this software for any purpose.  It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef _DRM_DP_HELPER_H_
+#define _DRM_DP_HELPER_H_
+
+/* From the VESA DisplayPort spec */
+
+#define AUX_NATIVE_WRITE	0x8
+#define AUX_NATIVE_READ		0x9
+#define AUX_I2C_WRITE		0x0
+#define AUX_I2C_READ		0x1
+#define AUX_I2C_STATUS		0x2
+#define AUX_I2C_MOT		0x4
+
+#define AUX_NATIVE_REPLY_ACK	(0x0 << 4)
+#define AUX_NATIVE_REPLY_NACK	(0x1 << 4)
+#define AUX_NATIVE_REPLY_DEFER	(0x2 << 4)
+#define AUX_NATIVE_REPLY_MASK	(0x3 << 4)
+
+#define AUX_I2C_REPLY_ACK	(0x0 << 6)
+#define AUX_I2C_REPLY_NACK	(0x1 << 6)
+#define AUX_I2C_REPLY_DEFER	(0x2 << 6)
+#define AUX_I2C_REPLY_MASK	(0x3 << 6)
+
+/* AUX CH addresses */
+/* DPCD */
+#define DP_DPCD_REV                         0x000
+
+#define DP_MAX_LINK_RATE                    0x001
+
+#define DP_MAX_LANE_COUNT                   0x002
+# define DP_MAX_LANE_COUNT_MASK		    0x1f
+# define DP_TPS3_SUPPORTED		    (1 << 6)
+# define DP_ENHANCED_FRAME_CAP		    (1 << 7)
+
+#define DP_MAX_DOWNSPREAD                   0x003
+# define DP_NO_AUX_HANDSHAKE_LINK_TRAINING  (1 << 6)
+
+#define DP_NORP                             0x004
+
+#define DP_DOWNSTREAMPORT_PRESENT           0x005
+# define DP_DWN_STRM_PORT_PRESENT           (1 << 0)
+# define DP_DWN_STRM_PORT_TYPE_MASK         0x06
+/* 00b = DisplayPort */
+/* 01b = Analog */
+/* 10b = TMDS or HDMI */
+/* 11b = Other */
+# define DP_FORMAT_CONVERSION               (1 << 3)
+
+#define DP_MAIN_LINK_CHANNEL_CODING         0x006
+
+#define DP_EDP_CONFIGURATION_CAP            0x00d
+#define DP_TRAINING_AUX_RD_INTERVAL         0x00e
+
+#define DP_PSR_SUPPORT                      0x070
+# define DP_PSR_IS_SUPPORTED                1
+#define DP_PSR_CAPS                         0x071
+# define DP_PSR_NO_TRAIN_ON_EXIT            1
+# define DP_PSR_SETUP_TIME_330              (0 << 1)
+# define DP_PSR_SETUP_TIME_275              (1 << 1)
+# define DP_PSR_SETUP_TIME_220              (2 << 1)
+# define DP_PSR_SETUP_TIME_165              (3 << 1)
+# define DP_PSR_SETUP_TIME_110              (4 << 1)
+# define DP_PSR_SETUP_TIME_55               (5 << 1)
+# define DP_PSR_SETUP_TIME_0                (6 << 1)
+# define DP_PSR_SETUP_TIME_MASK             (7 << 1)
+# define DP_PSR_SETUP_TIME_SHIFT            1
+
+/* link configuration */
+#define	DP_LINK_BW_SET		            0x100
+# define DP_LINK_BW_1_62		    0x06
+# define DP_LINK_BW_2_7			    0x0a
+# define DP_LINK_BW_5_4			    0x14
+
+#define DP_LANE_COUNT_SET	            0x101
+# define DP_LANE_COUNT_MASK		    0x0f
+# define DP_LANE_COUNT_ENHANCED_FRAME_EN    (1 << 7)
+
+#define DP_TRAINING_PATTERN_SET	            0x102
+# define DP_TRAINING_PATTERN_DISABLE	    0
+# define DP_TRAINING_PATTERN_1		    1
+# define DP_TRAINING_PATTERN_2		    2
+# define DP_TRAINING_PATTERN_3		    3
+# define DP_TRAINING_PATTERN_MASK	    0x3
+
+# define DP_LINK_QUAL_PATTERN_DISABLE	    (0 << 2)
+# define DP_LINK_QUAL_PATTERN_D10_2	    (1 << 2)
+# define DP_LINK_QUAL_PATTERN_ERROR_RATE    (2 << 2)
+# define DP_LINK_QUAL_PATTERN_PRBS7	    (3 << 2)
+# define DP_LINK_QUAL_PATTERN_MASK	    (3 << 2)
+
+# define DP_RECOVERED_CLOCK_OUT_EN	    (1 << 4)
+# define DP_LINK_SCRAMBLING_DISABLE	    (1 << 5)
+
+# define DP_SYMBOL_ERROR_COUNT_BOTH	    (0 << 6)
+# define DP_SYMBOL_ERROR_COUNT_DISPARITY    (1 << 6)
+# define DP_SYMBOL_ERROR_COUNT_SYMBOL	    (2 << 6)
+# define DP_SYMBOL_ERROR_COUNT_MASK	    (3 << 6)
+
+#define DP_TRAINING_LANE0_SET		    0x103
+#define DP_TRAINING_LANE1_SET		    0x104
+#define DP_TRAINING_LANE2_SET		    0x105
+#define DP_TRAINING_LANE3_SET		    0x106
+
+# define DP_TRAIN_VOLTAGE_SWING_MASK	    0x3
+# define DP_TRAIN_VOLTAGE_SWING_SHIFT	    0
+# define DP_TRAIN_MAX_SWING_REACHED	    (1 << 2)
+# define DP_TRAIN_VOLTAGE_SWING_400	    (0 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_600	    (1 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_800	    (2 << 0)
+# define DP_TRAIN_VOLTAGE_SWING_1200	    (3 << 0)
+
+# define DP_TRAIN_PRE_EMPHASIS_MASK	    (3 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_0	    (0 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_3_5	    (1 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_6	    (2 << 3)
+# define DP_TRAIN_PRE_EMPHASIS_9_5	    (3 << 3)
+
+# define DP_TRAIN_PRE_EMPHASIS_SHIFT	    3
+# define DP_TRAIN_MAX_PRE_EMPHASIS_REACHED  (1 << 5)
+
+#define DP_DOWNSPREAD_CTRL		    0x107
+# define DP_SPREAD_AMP_0_5		    (1 << 4)
+
+#define DP_MAIN_LINK_CHANNEL_CODING_SET	    0x108
+# define DP_SET_ANSI_8B10B		    (1 << 0)
+
+#define DP_PSR_EN_CFG			    0x170
+# define DP_PSR_ENABLE			    (1 << 0)
+# define DP_PSR_MAIN_LINK_ACTIVE	    (1 << 1)
+# define DP_PSR_CRC_VERIFICATION	    (1 << 2)
+# define DP_PSR_FRAME_CAPTURE		    (1 << 3)
+
+#define DP_DEVICE_SERVICE_IRQ_VECTOR	    0x201
+# define DP_REMOTE_CONTROL_COMMAND_PENDING  (1 << 0)
+# define DP_AUTOMATED_TEST_REQUEST	    (1 << 1)
+# define DP_CP_IRQ			    (1 << 2)
+# define DP_SINK_SPECIFIC_IRQ		    (1 << 6)
+
+#define DP_EDP_CONFIGURATION_SET            0x10a
+
+#define DP_LANE0_1_STATUS		    0x202
+#define DP_LANE2_3_STATUS		    0x203
+# define DP_LANE_CR_DONE		    (1 << 0)
+# define DP_LANE_CHANNEL_EQ_DONE	    (1 << 1)
+# define DP_LANE_SYMBOL_LOCKED		    (1 << 2)
+
+#define DP_CHANNEL_EQ_BITS (DP_LANE_CR_DONE |		\
+			    DP_LANE_CHANNEL_EQ_DONE |	\
+			    DP_LANE_SYMBOL_LOCKED)
+
+#define DP_LANE_ALIGN_STATUS_UPDATED	    0x204
+
+#define DP_INTERLANE_ALIGN_DONE		    (1 << 0)
+#define DP_DOWNSTREAM_PORT_STATUS_CHANGED   (1 << 6)
+#define DP_LINK_STATUS_UPDATED		    (1 << 7)
+
+#define DP_SINK_STATUS			    0x205
+
+#define DP_RECEIVE_PORT_0_STATUS	    (1 << 0)
+#define DP_RECEIVE_PORT_1_STATUS	    (1 << 1)
+
+#define DP_ADJUST_REQUEST_LANE0_1	    0x206
+#define DP_ADJUST_REQUEST_LANE2_3	    0x207
+# define DP_ADJUST_VOLTAGE_SWING_LANE0_MASK  0x03
+# define DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT 0
+# define DP_ADJUST_PRE_EMPHASIS_LANE0_MASK   0x0c
+# define DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT  2
+# define DP_ADJUST_VOLTAGE_SWING_LANE1_MASK  0x30
+# define DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT 4
+# define DP_ADJUST_PRE_EMPHASIS_LANE1_MASK   0xc0
+# define DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT  6
+
+#define DP_TEST_REQUEST			    0x218
+# define DP_TEST_LINK_TRAINING		    (1 << 0)
+# define DP_TEST_LINK_PATTERN		    (1 << 1)
+# define DP_TEST_LINK_EDID_READ		    (1 << 2)
+# define DP_TEST_LINK_PHY_TEST_PATTERN	    (1 << 3) /* DPCD >= 1.1 */
+
+#define DP_TEST_LINK_RATE		    0x219
+# define DP_LINK_RATE_162		    (0x6)
+# define DP_LINK_RATE_27		    (0xa)
+
+#define DP_TEST_LANE_COUNT		    0x220
+
+#define DP_TEST_PATTERN			    0x221
+
+#define DP_TEST_RESPONSE		    0x260
+# define DP_TEST_ACK			    (1 << 0)
+# define DP_TEST_NAK			    (1 << 1)
+# define DP_TEST_EDID_CHECKSUM_WRITE	    (1 << 2)
+
+#define DP_SET_POWER                        0x600
+# define DP_SET_POWER_D0                    0x1
+# define DP_SET_POWER_D3                    0x2
+
+#define DP_PSR_ERROR_STATUS                 0x2006
+# define DP_PSR_LINK_CRC_ERROR              (1 << 0)
+# define DP_PSR_RFB_STORAGE_ERROR           (1 << 1)
+
+#define DP_PSR_ESI                          0x2007
+# define DP_PSR_CAPS_CHANGE                 (1 << 0)
+
+#define DP_PSR_STATUS                       0x2008
+# define DP_PSR_SINK_INACTIVE               0
+# define DP_PSR_SINK_ACTIVE_SRC_SYNCED      1
+# define DP_PSR_SINK_ACTIVE_RFB             2
+# define DP_PSR_SINK_ACTIVE_SINK_SYNCED     3
+# define DP_PSR_SINK_ACTIVE_RESYNC          4
+# define DP_PSR_SINK_INTERNAL_ERROR         7
+# define DP_PSR_SINK_STATE_MASK             0x07
+
+#define MODE_I2C_START	1
+#define MODE_I2C_WRITE	2
+#define MODE_I2C_READ	4
+#define MODE_I2C_STOP	8
+
+#endif /* _DRM_DP_HELPER_H_ */