summaryrefslogtreecommitdiff
path: root/src/northbridge/amd
diff options
context:
space:
mode:
authorYinghai Lu <yinghailu@gmail.com>2005-07-08 02:49:49 +0000
committerYinghai Lu <yinghailu@gmail.com>2005-07-08 02:49:49 +0000
commit13f1c2af8be2cd7f7e99a678f5d428a65b771811 (patch)
tree27cad5581f1fa150f573149d48e82f70ba1b1d9f /src/northbridge/amd
parent14cde9e96a777f9d75016a13b23fab0480515f58 (diff)
eric patch
1. x86_setup_mtrr take address bit. 2. generic ht, pcix, pcie beidge... 3. scan bus and reset_bus 4. ht read ctrl to decide if the ht chain is ready 5. Intel e7520 and e7525 support 6. new ich5r support 7. intel sb 6300 support. yhlu patch 1. split x86_setup_mtrrs to fixed and var 2. if (resource->flags & IORESOURCE_FIXED ) return; in device.c pick_largest_resource 3. in_conherent.c K8_SCAN_PCI_BUS git-svn-id: svn://svn.coreboot.org/coreboot/trunk@1982 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/amd')
-rw-r--r--src/northbridge/amd/amdk8/coherent_ht.c114
-rw-r--r--src/northbridge/amd/amdk8/debug.c32
-rw-r--r--src/northbridge/amd/amdk8/early_ht.c31
-rw-r--r--src/northbridge/amd/amdk8/incoherent_ht.c334
-rw-r--r--src/northbridge/amd/amdk8/misc_control.c5
-rw-r--r--src/northbridge/amd/amdk8/northbridge.c260
-rw-r--r--src/northbridge/amd/amdk8/setup_resource_map.c149
7 files changed, 626 insertions, 299 deletions
diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c
index d7be557d37..c79a432ab5 100644
--- a/src/northbridge/amd/amdk8/coherent_ht.c
+++ b/src/northbridge/amd/amdk8/coherent_ht.c
@@ -145,15 +145,16 @@ static void disable_probes(void)
print_spew("Disabling read/write/fill probes for UP... ");
- val=pci_read_config32(NODE_HT(0), 0x68);
- val |= (1<<10)|(1<<9)|(1<<8)|(1<<4)|(1<<3)|(1<<2)|(1<<1)|(1 << 0);
- pci_write_config32(NODE_HT(0), 0x68, val);
+ val=pci_read_config32(NODE_HT(0), HT_TRANSACTION_CONTROL);
+ val |= HTTC_DIS_FILL_P | HTTC_DIS_RMT_MEM_C | HTTC_DIS_P_MEM_C |
+ HTTC_DIS_MTS | HTTC_DIS_WR_DW_P | HTTC_DIS_WR_B_P |
+ HTTC_DIS_RD_DW_P | HTTC_DIS_RD_B_P;
+ pci_write_config32(NODE_HT(0), HT_TRANSACTION_CONTROL, val);
print_spew("done.\r\n");
}
-
#ifndef ENABLE_APIC_EXT_ID
#define ENABLE_APIC_EXT_ID 0
#endif
@@ -163,7 +164,7 @@ static void enable_apic_ext_id(u8 node)
#if ENABLE_APIC_EXT_ID==1
#warning "FIXME Is the right place to enable apic ext id here?"
- u32 val;
+ u32 val;
val = pci_read_config32(NODE_HT(node), 0x68);
val |= (HTTC_APIC_EXT_SPUR | HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST);
@@ -171,8 +172,6 @@ static void enable_apic_ext_id(u8 node)
#endif
}
-
-
static void enable_routing(u8 node)
{
u32 val;
@@ -277,11 +276,11 @@ static void wait_ht_stable(uint8_t node)
}
#endif
-static int check_connection(u8 dest)
+static int verify_connection(u8 dest)
{
/* See if we have a valid connection to dest */
u32 val;
-
+
/* Verify that the coherent hypertransport link is
* established and actually working by reading the
* remode node's vendor/device id
@@ -289,10 +288,6 @@ static int check_connection(u8 dest)
val = pci_read_config32(NODE_HT(dest),0);
if(val != 0x11001022)
return 0;
-// needed?
-#if K8_HT_CHECK_PENDING_LINK == 1
- wait_ht_stable(dest);
-#endif
return 1;
}
@@ -306,11 +301,11 @@ static uint16_t read_freq_cap(device_t dev, uint8_t pos)
freq_cap = pci_read_config16(dev, pos);
freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */
-
- #if K8_HT_FREQ_1G_SUPPORT == 1
- if (!is_cpu_pre_e0())
+#if K8_HT_FREQ_1G_SUPPORT == 1
+ if (!is_cpu_pre_e0()) {
return freq_cap;
- #endif
+ }
+#endif
id = pci_read_config32(dev, 0);
@@ -726,8 +721,8 @@ static struct setup_smp_result setup_smp2(void)
print_linkn("(0,1) link=", byte);
setup_row_direct(0,1, byte);
setup_temp_row(0, 1);
-
- check_connection(7);
+
+ verify_connection(7);
/* We found 2 nodes so far */
val = pci_read_config32(NODE_HT(7), 0x6c);
@@ -751,8 +746,8 @@ static struct setup_smp_result setup_smp2(void)
print_linkn("\t-->(0,1) link=", byte);
setup_row_direct(0,1, byte);
setup_temp_row(0, 1);
-
- check_connection(7);
+
+ verify_connection(7);
/* We found 2 nodes so far */
val = pci_read_config32(NODE_HT(7), 0x6c);
@@ -832,7 +827,7 @@ static struct setup_smp_result setup_smp4(int needs_reset)
setup_row_indirect_group(conn4_1, sizeof(conn4_1)/sizeof(conn4_1[0]));
setup_temp_row(0,2);
- check_connection(7);
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 0*/
print_linkn("(2,0) link=", byte);
@@ -846,7 +841,7 @@ static struct setup_smp_result setup_smp4(int needs_reset)
setup_temp_row(0,1);
setup_temp_row(1,3);
- check_connection(7);
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 1*/
@@ -865,7 +860,7 @@ static struct setup_smp_result setup_smp4(int needs_reset)
setup_row_direct(2,3, byte & 0x3);
setup_temp_row(0,2);
setup_temp_row(2,3);
- check_connection(7); /* to 3*/
+ verify_connection(7); /* to 3*/
#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
/* We need to find out which link is to node3 */
@@ -878,7 +873,7 @@ static struct setup_smp_result setup_smp4(int needs_reset)
print_linkn("\t-->(2,3) link=", byte);
setup_row_direct(2,3,byte);
setup_temp_row(2,3);
- check_connection(7); /* to 3*/
+ verify_connection(7); /* to 3*/
}
}
#endif
@@ -1016,7 +1011,7 @@ static struct setup_smp_result setup_smp6(int needs_reset)
for(byte=0; byte<4; byte+=2) {
setup_temp_row(byte,byte+2);
}
- check_connection(7);
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /*get default link on 7 to 2*/
print_linkn("(4,2) link=", byte);
@@ -1044,7 +1039,7 @@ static struct setup_smp_result setup_smp6(int needs_reset)
for(byte=0; byte<4; byte+=2) {
setup_temp_row(byte+1,byte+3);
}
- check_connection(7);
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 3*/
@@ -1064,7 +1059,7 @@ static struct setup_smp_result setup_smp6(int needs_reset)
setup_temp_row(0,2);
setup_temp_row(2,4);
setup_temp_row(4,5);
- check_connection(7); /* to 5*/
+ verify_connection(7); /* to 5*/
#if CONFIG_MAX_PHYSICAL_CPUS > 6
/* We need to find out which link is to node5 */
@@ -1078,7 +1073,7 @@ static struct setup_smp_result setup_smp6(int needs_reset)
print_linkn("\t-->(4,5) link=", byte);
setup_row_direct(4,5,byte);
setup_temp_row(4,5);
- check_connection(7); /* to 5*/
+ verify_connection(7); /* to 5*/
}
}
#endif
@@ -1254,7 +1249,7 @@ static struct setup_smp_result setup_smp8(int needs_reset)
for(byte=0; byte<6; byte+=2) {
setup_temp_row(byte,byte+2);
}
- check_connection(7);
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
print_linkn("(6,4) link=", byte);
@@ -1294,7 +1289,7 @@ static struct setup_smp_result setup_smp8(int needs_reset)
}
setup_temp_row(5,6);
- check_connection(7);
+ verify_connection(7);
val = get_row(7,6); // to chect it if it is node6 before renaming
if( (val>>16) == 1) { // it is real node 7 so swap it
@@ -1316,7 +1311,7 @@ static struct setup_smp_result setup_smp8(int needs_reset)
#endif
setup_temp_row(5,6);
- check_connection(7);
+ verify_connection(7);
}
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
@@ -1334,7 +1329,7 @@ static struct setup_smp_result setup_smp8(int needs_reset)
setup_temp_row(byte+1,byte+3);
}
- check_connection(7);
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
@@ -1354,7 +1349,7 @@ static struct setup_smp_result setup_smp8(int needs_reset)
setup_temp_row(byte,byte+2);
}
- check_connection(7);
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
@@ -1379,7 +1374,7 @@ static struct setup_smp_result setup_smp8(int needs_reset)
setup_temp_row(byte+1,byte+3);
}
- check_connection(7);
+ verify_connection(7);
val = pci_read_config32(NODE_HT(7), 0x6c);
byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
@@ -1568,7 +1563,6 @@ static struct setup_smp_result setup_smp(void)
#endif
return result;
-
}
static unsigned verify_mp_capabilities(unsigned nodes)
@@ -1663,10 +1657,10 @@ static void coherent_ht_finalize(unsigned nodes)
#endif
/* set up cpu count and node count and enable Limit
- * Config Space Range for all available CPUs.
- * Also clear non coherent hypertransport bus range
- * registers on Hammer A0 revision.
- */
+ * Config Space Range for all available CPUs.
+ * Also clear non coherent hypertransport bus range
+ * registers on Hammer A0 revision.
+ */
print_spew("coherent_ht_finalize\r\n");
rev_a0 = is_cpu_rev_a0();
@@ -1686,21 +1680,19 @@ static void coherent_ht_finalize(unsigned nodes)
pci_write_config32(dev, 0x60, val);
/* Only respond to real cpu pci configuration cycles
- * and optimize the HT settings
- */
- val=pci_read_config32(dev, 0x68);
+ * and optimize the HT settings
+ */
+ val=pci_read_config32(dev, HT_TRANSACTION_CONTROL);
val &= ~((HTTC_BUF_REL_PRI_MASK << HTTC_BUF_REL_PRI_SHIFT) |
(HTTC_MED_PRI_BYP_CNT_MASK << HTTC_MED_PRI_BYP_CNT_SHIFT) |
(HTTC_HI_PRI_BYP_CNT_MASK << HTTC_HI_PRI_BYP_CNT_SHIFT));
val |= HTTC_LIMIT_CLDT_CFG |
(HTTC_BUF_REL_PRI_8 << HTTC_BUF_REL_PRI_SHIFT) |
- HTTC_RSP_PASS_PW |
(3 << HTTC_MED_PRI_BYP_CNT_SHIFT) |
(3 << HTTC_HI_PRI_BYP_CNT_SHIFT);
- pci_write_config32(dev, 0x68, val);
+ pci_write_config32(dev, HT_TRANSACTION_CONTROL, val);
if (rev_a0) {
- print_spew("shit it is an old cup\n");
pci_write_config32(dev, 0x94, 0);
pci_write_config32(dev, 0xb4, 0);
pci_write_config32(dev, 0xd4, 0);
@@ -1720,8 +1712,8 @@ static int apply_cpu_errata_fixes(unsigned nodes, int needs_reset)
if (is_cpu_pre_c0()) {
/* Errata 66
- * Limit the number of downstream posted requests to 1
- */
+ * Limit the number of downstream posted requests to 1
+ */
cmd = pci_read_config32(dev, 0x70);
if ((cmd & (3 << 0)) != 2) {
cmd &= ~(3<<0);
@@ -1745,12 +1737,12 @@ static int apply_cpu_errata_fixes(unsigned nodes, int needs_reset)
}
}
- else if(is_cpu_pre_d0()) { // d0 later don't need it
+ else if (is_cpu_pre_d0()) { // d0 later don't need it
uint32_t cmd_ref;
/* Errata 98
- * Set Clk Ramp Hystersis to 7
- * Clock Power/Timing Low
- */
+ * Set Clk Ramp Hystersis to 7
+ * Clock Power/Timing Low
+ */
cmd_ref = 0x04e20707; /* Registered */
cmd = pci_read_config32(dev, 0xd4);
if(cmd != cmd_ref) {
@@ -1778,7 +1770,10 @@ static int optimize_link_read_pointers(unsigned nodes, int needs_reset)
/* This works on an Athlon64 because unimplemented links return 0 */
reg = 0x98 + (link * 0x20);
link_type = pci_read_config32(f0_dev, reg);
- if ((link_type & 7) == 3) { /* only handle coherent link here*/
+ /* Only handle coherent links */
+ if ((link_type & (LinkConnected | InitComplete|NonCoherent)) ==
+ (LinkConnected|InitComplete))
+ {
cmd &= ~(0xff << (link *8));
cmd |= 0x25 << (link *8);
}
@@ -1794,6 +1789,8 @@ static int optimize_link_read_pointers(unsigned nodes, int needs_reset)
static int setup_coherent_ht_domain(void)
{
struct setup_smp_result result;
+ result.nodes = 1;
+ result.needs_reset = 0;
#if K8_HT_CHECK_PENDING_LINK == 1
//needed?
@@ -1802,17 +1799,14 @@ static int setup_coherent_ht_domain(void)
enable_bsp_routing();
#if CONFIG_MAX_PHYSICAL_CPUS > 1
- result = setup_smp();
- result.nodes = verify_mp_capabilities(result.nodes);
- clear_dead_routes(result.nodes);
-#else
- result.nodes = 1;
- result.needs_reset = 0;
+ result = setup_smp();
+ result.nodes = verify_mp_capabilities(result.nodes);
+ clear_dead_routes(result.nodes);
#endif
if (result.nodes == 1) {
setup_uniprocessor();
- }
+ }
coherent_ht_finalize(result.nodes);
result.needs_reset = apply_cpu_errata_fixes(result.nodes, result.needs_reset);
result.needs_reset = optimize_link_read_pointers(result.nodes, result.needs_reset);
diff --git a/src/northbridge/amd/amdk8/debug.c b/src/northbridge/amd/amdk8/debug.c
index 861ad8c38a..d0841e878e 100644
--- a/src/northbridge/amd/amdk8/debug.c
+++ b/src/northbridge/amd/amdk8/debug.c
@@ -5,12 +5,16 @@
#if 1
static void print_debug_pci_dev(unsigned dev)
{
+#if CONFIG_USE_INIT
+ printk_debug("PCI: %02x:%02x.%02x", (dev>>16) & 0xff, (dev>>11) & 0x1f, (dev>>8) & 0x7);
+#else
print_debug("PCI: ");
print_debug_hex8((dev >> 16) & 0xff);
print_debug_char(':');
print_debug_hex8((dev >> 11) & 0x1f);
print_debug_char('.');
print_debug_hex8((dev >> 8) & 7);
+#endif
}
static void print_pci_devices(void)
@@ -27,7 +31,19 @@ static void print_pci_devices(void)
continue;
}
print_debug_pci_dev(dev);
+#if CONFIG_USE_INIT
+ printk_debug(" %04x:%04x\r\n", (id & 0xffff), (id>>16));
+#else
+ print_debug_hex32(id);
print_debug("\r\n");
+#endif
+ if(((dev>>8) & 0x07) == 0) {
+ uint8_t hdr_type;
+ hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE);
+ if((hdr_type & 0x80) != 0x80) {
+ dev += PCI_DEV(0,0,7);
+ }
+ }
}
}
@@ -72,6 +88,14 @@ static void dump_pci_devices(void)
continue;
}
dump_pci_device(dev);
+
+ if(((dev>>8) & 0x07) == 0) {
+ uint8_t hdr_type;
+ hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE);
+ if((hdr_type & 0x80) != 0x80) {
+ dev += PCI_DEV(0,0,7);
+ }
+ }
}
}
@@ -89,6 +113,14 @@ static void dump_pci_devices_on_bus(unsigned busn)
continue;
}
dump_pci_device(dev);
+
+ if(((dev>>8) & 0x07) == 0) {
+ uint8_t hdr_type;
+ hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE);
+ if((hdr_type & 0x80) != 0x80) {
+ dev += PCI_DEV(0,0,7);
+ }
+ }
}
}
diff --git a/src/northbridge/amd/amdk8/early_ht.c b/src/northbridge/amd/amdk8/early_ht.c
index ab9d4592dd..2711657455 100644
--- a/src/northbridge/amd/amdk8/early_ht.c
+++ b/src/northbridge/amd/amdk8/early_ht.c
@@ -17,8 +17,9 @@ static int enumerate_ht_chain(void)
id = pci_read_config32(PCI_DEV(0,0,0), PCI_VENDOR_ID);
/* If the chain is enumerated quit */
if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
+ (((id >> 16) & 0xffff) == 0xffff) ||
+ (((id >> 16) & 0xffff) == 0x0000))
+ {
break;
}
@@ -35,7 +36,8 @@ static int enumerate_ht_chain(void)
hdr_type &= 0x7f;
if ((hdr_type == PCI_HEADER_TYPE_NORMAL) ||
- (hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
+ (hdr_type == PCI_HEADER_TYPE_BRIDGE))
+ {
pos = pci_read_config8(PCI_DEV(0,0,0), PCI_CAPABILITY_LIST);
}
while(pos != 0) {
@@ -43,24 +45,39 @@ static int enumerate_ht_chain(void)
cap = pci_read_config8(PCI_DEV(0,0,0), pos + PCI_CAP_LIST_ID);
if (cap == PCI_CAP_ID_HT) {
uint16_t flags;
+ /* Read and write and reread flags so the link
+ * direction bit is valid.
+ */
+ flags = pci_read_config16(PCI_DEV(0,0,0), pos + PCI_CAP_FLAGS);
+ pci_write_config16(PCI_DEV(0,0,0), pos + PCI_CAP_FLAGS, flags);
flags = pci_read_config16(PCI_DEV(0,0,0), pos + PCI_CAP_FLAGS);
if ((flags >> 13) == 0) {
unsigned count;
+ unsigned ctrl, ctrl_off;
flags &= ~0x1f;
flags |= next_unitid & 0x1f;
count = (flags >> 5) & 0x1f;
+ next_unitid += count;
+
+ /* Test for end of chain */
+ ctrl_off = ((flags >> 10) & 1)?
+ PCI_HT_CAP_SLAVE_CTRL1 : PCI_HT_CAP_SLAVE_CTRL0;
+ ctrl = pci_read_config16(PCI_DEV(0,0,0), pos + ctrl_off);
+ /* Is this the end of the hypertransport chain.
+ * or has the link failed?
+ */
+ if (ctrl & ((1 << 6)|(1 << 4))) {
+ next_unitid = 0x20;
+ }
pci_write_config16(PCI_DEV(0, 0, 0), pos + PCI_CAP_FLAGS, flags);
-
- next_unitid += count;
break;
}
}
pos = pci_read_config8(PCI_DEV(0, 0, 0), pos + PCI_CAP_LIST_NEXT);
}
- } while((last_unitid != next_unitid) && (next_unitid <= 0x1f));
-
+ } while((last_unitid != next_unitid) && (next_unitid <= 0x1f));
return reset_needed;
}
diff --git a/src/northbridge/amd/amdk8/incoherent_ht.c b/src/northbridge/amd/amdk8/incoherent_ht.c
index 7bb315d687..d4271efbda 100644
--- a/src/northbridge/amd/amdk8/incoherent_ht.c
+++ b/src/northbridge/amd/amdk8/incoherent_ht.c
@@ -10,6 +10,10 @@
#define K8_HT_FREQ_1G_SUPPORT 0
#endif
+#ifndef K8_SCAN_PCI_BUS
+ #define K8_SCAN_PCI_BUS 0
+#endif
+
static inline void print_linkn_in (const char *strval, uint8_t byteval)
{
#if 1
@@ -21,7 +25,7 @@ static inline void print_linkn_in (const char *strval, uint8_t byteval)
#endif
}
-static uint8_t ht_lookup_slave_capability(device_t dev)
+static uint8_t ht_lookup_capability(device_t dev, uint16_t val)
{
uint8_t pos;
uint8_t hdr_type;
@@ -44,8 +48,8 @@ static uint8_t ht_lookup_slave_capability(device_t dev)
uint16_t flags;
flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS);
- if ((flags >> 13) == 0) {
- /* Entry is a Slave secondary, success... */
+ if ((flags >> 13) == val) {
+ /* Entry is a slave or host , success... */
break;
}
}
@@ -54,6 +58,16 @@ static uint8_t ht_lookup_slave_capability(device_t dev)
return pos;
}
+static uint8_t ht_lookup_slave_capability(device_t dev)
+{
+ return ht_lookup_capability(dev, 0); // Slave/Primary Interface Block Format
+}
+
+static uint8_t ht_lookup_host_capability(device_t dev)
+{
+ return ht_lookup_capability(dev, 1); // Host/Secondary Interface Block Format
+}
+
static void ht_collapse_previous_enumeration(uint8_t bus)
{
device_t dev;
@@ -135,25 +149,28 @@ static uint16_t ht_read_freq_cap(device_t dev, uint8_t pos)
return freq_cap;
}
+#define LINK_OFFS(CTRL, WIDTH,FREQ,FREQ_CAP) \
+ (((CTRL & 0xff) << 24) | ((WIDTH & 0xff) << 16) | ((FREQ & 0xff) << 8) | (FREQ_CAP & 0xFF))
-#define LINK_OFFS(WIDTH,FREQ,FREQ_CAP) \
- (((WIDTH & 0xff) << 16) | ((FREQ & 0xff) << 8) | (FREQ_CAP & 0xFF))
-
+#define LINK_CTRL(OFFS) ((OFFS >> 24) & 0xFF)
#define LINK_WIDTH(OFFS) ((OFFS >> 16) & 0xFF)
#define LINK_FREQ(OFFS) ((OFFS >> 8) & 0xFF)
#define LINK_FREQ_CAP(OFFS) ((OFFS) & 0xFF)
#define PCI_HT_HOST_OFFS LINK_OFFS( \
+ PCI_HT_CAP_HOST_CTRL, \
PCI_HT_CAP_HOST_WIDTH, \
PCI_HT_CAP_HOST_FREQ, \
PCI_HT_CAP_HOST_FREQ_CAP)
#define PCI_HT_SLAVE0_OFFS LINK_OFFS( \
+ PCI_HT_CAP_SLAVE_CTRL0, \
PCI_HT_CAP_SLAVE_WIDTH0, \
PCI_HT_CAP_SLAVE_FREQ0, \
PCI_HT_CAP_SLAVE_FREQ_CAP0)
#define PCI_HT_SLAVE1_OFFS LINK_OFFS( \
+ PCI_HT_CAP_SLAVE_CTRL1, \
PCI_HT_CAP_SLAVE_WIDTH1, \
PCI_HT_CAP_SLAVE_FREQ1, \
PCI_HT_CAP_SLAVE_FREQ_CAP1)
@@ -164,8 +181,8 @@ static int ht_optimize_link(
{
static const uint8_t link_width_to_pow2[]= { 3, 4, 0, 5, 1, 2, 0, 0 };
static const uint8_t pow2_to_link_width[] = { 0x7, 4, 5, 0, 1, 3 };
- uint16_t freq_cap1, freq_cap2, freq_cap, freq_mask;
- uint8_t width_cap1, width_cap2, width_cap, width, old_width, ln_width1, ln_width2;
+ uint16_t freq_cap1, freq_cap2;
+ uint8_t width_cap1, width_cap2, width, old_width, ln_width1, ln_width2;
uint8_t freq, old_freq;
int needs_reset;
/* Set link width and frequency */
@@ -228,94 +245,123 @@ static int ht_optimize_link(
return needs_reset;
}
-static int ht_setup_chain(device_t udev, uint8_t upos)
+#if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
+static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus);
+static int scan_pci_bus( unsigned bus)
{
- /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
- * On most boards this just happens. If a cpu has multiple
- * non Coherent links the appropriate bus registers for the
- * links needs to be programed to point at bus 0.
- */
- uint8_t next_unitid, last_unitid;
- int reset_needed;
- unsigned uoffs;
-
- /* Make certain the HT bus is not enumerated */
- ht_collapse_previous_enumeration(0);
+ /*
+ here we already can access PCI_DEV(bus, 0, 0) to PCI_DEV(bus, 0x1f, 0x7)
+ So We can scan these devices to find out if they are bridge
+ If it is pci bridge, We need to set busn in bridge, and go on
+ For ht bridge, We need to set the busn in bridge and ht_setup_chainx, and the scan_pci_bus
+ */
+ unsigned int devfn;
+ unsigned new_bus;
+ unsigned max_bus;
+
+ new_bus = (bus & 0xff); // mask out the reset_needed
+
+ if(new_bus<0x40) {
+ max_bus = 0x3f;
+ } else if (new_bus<0x80) {
+ max_bus = 0x7f;
+ } else if (new_bus<0xc0) {
+ max_bus = 0xbf;
+ } else {
+ max_bus = 0xff;
+ }
- reset_needed = 0;
- uoffs = PCI_HT_HOST_OFFS;
- next_unitid = 1;
- do {
- uint32_t id;
- uint8_t pos;
- uint16_t flags;
- uint8_t count;
- unsigned offs;
+ new_bus = bus;
- device_t dev = PCI_DEV(0, 0, 0);
- last_unitid = next_unitid;
+#if 0
+#if CONFIG_USE_INIT == 1
+ printk_debug("bus_num=%02x\r\n", bus);
+#endif
+#endif
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- /* If the chain is enumerated quit */
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
- break;
- }
+ for (devfn = 0; devfn <= 0xff; devfn++) {
+ uint8_t hdr_type;
+ uint16_t class;
+ uint32_t buses;
+ device_t dev;
+ uint16_t cr;
+ dev = PCI_DEV((bus & 0xff), ((devfn>>3) & 0x1f), (devfn & 0x7));
+ hdr_type = pci_read_config8(dev, PCI_HEADER_TYPE);
+ class = pci_read_config16(dev, PCI_CLASS_DEVICE);
- pos = ht_lookup_slave_capability(dev);
- if (!pos) {
- print_err("HT link capability not found\r\n");
- break;
+#if 0
+#if CONFIG_USE_INIT == 1
+ if(hdr_type !=0xff ) {
+ printk_debug("dev=%02x fn=%02x hdr_type=%02x class=%04x\r\n",
+ (devfn>>3)& 0x1f, (devfn & 0x7), hdr_type, class);
}
-#if CK804_DEVN_BASE==0
- //CK804 workaround:
- // CK804 UnitID changes not use
- id = pci_read_config32(dev, PCI_VENDOR_ID);
- if(id != 0x005e10de) {
#endif
-
- /* Update the Unitid of the current device */
- flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS);
- flags &= ~0x1f; /* mask out the bse Unit ID */
- flags |= next_unitid & 0x1f;
- pci_write_config16(dev, pos + PCI_CAP_FLAGS, flags);
-
- dev = PCI_DEV(0, next_unitid, 0);
-#if CK804_DEVN_BASE==0
- }
- else {
- dev = PCI_DEV(0, 0, 0);
- }
#endif
-
- /* Compute the number of unitids consumed */
- count = (flags >> 5) & 0x1f;
- next_unitid += count;
-
- /* get ht direction */
- flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS); // double read ??
-
- offs = ((flags>>10) & 1) ? PCI_HT_SLAVE1_OFFS : PCI_HT_SLAVE0_OFFS;
-
- /* Setup the Hypertransport link */
- reset_needed |= ht_optimize_link(udev, upos, uoffs, dev, pos, offs);
-
-#if CK804_DEVN_BASE==0
- if(id == 0x005e10de) {
- break;
+ switch(hdr_type & 0x7f) { /* header type */
+ case PCI_HEADER_TYPE_BRIDGE:
+ if (class != PCI_CLASS_BRIDGE_PCI) goto bad;
+ /* set the bus range dev */
+
+ /* Clear all status bits and turn off memory, I/O and master enables. */
+ cr = pci_read_config16(dev, PCI_COMMAND);
+ pci_write_config16(dev, PCI_COMMAND, 0x0000);
+ pci_write_config16(dev, PCI_STATUS, 0xffff);
+
+ buses = pci_read_config32(dev, PCI_PRIMARY_BUS);
+
+ buses &= 0xff000000;
+ new_bus++;
+ buses |= (((unsigned int) (bus & 0xff) << 0) |
+ ((unsigned int) (new_bus & 0xff) << 8) |
+ ((unsigned int) max_bus << 16));
+ pci_write_config32(dev, PCI_PRIMARY_BUS, buses);
+
+ {
+ /* here we need to figure out if dev is a ht bridge
+ if it is ht bridge, we need to call ht_setup_chainx at first
+ Not verified --- yhlu
+ */
+ uint8_t upos;
+ upos = ht_lookup_host_capability(dev); // one func one ht sub
+ if (upos) { // sub ht chain
+ uint8_t busn;
+ busn = (new_bus & 0xff);
+ /* Make certain the HT bus is not enumerated */
+ ht_collapse_previous_enumeration(busn);
+ /* scan the ht chain */
+ new_bus |= (ht_setup_chainx(dev,upos,busn)<<16); // store reset_needed to upword
+ }
+ }
+
+ new_bus = scan_pci_bus(new_bus);
+ /* set real max bus num in that */
+
+ buses = (buses & 0xff00ffff) |
+ ((unsigned int) (new_bus & 0xff) << 16);
+ pci_write_config32(dev, PCI_PRIMARY_BUS, buses);
+
+ pci_write_config16(dev, PCI_COMMAND, cr);
+
+ break;
+ default:
+ bad:
+ ;
+ }
+
+ /* if this is not a multi function device,
+ * or the device is not present don't waste
+ * time probing another function.
+ * Skip to next device.
+ */
+ if ( ((devfn & 0x07) == 0x00) && ((hdr_type & 0x80) != 0x80))
+ {
+ devfn += 0x07;
}
-#endif
-
- /* Remeber the location of the last device */
- udev = dev;
- upos = pos;
- uoffs = (offs != PCI_HT_SLAVE0_OFFS) ? PCI_HT_SLAVE0_OFFS : PCI_HT_SLAVE1_OFFS;
-
- } while((last_unitid != next_unitid) && (next_unitid <= 0x1f));
- return reset_needed;
+ }
+
+ return new_bus;
}
-
+#endif
static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus)
{
uint8_t next_unitid, last_unitid;
@@ -328,25 +374,38 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus)
do {
uint32_t id;
uint8_t pos;
- uint16_t flags;
+ uint16_t flags, ctrl;
uint8_t count;
unsigned offs;
-
+
+ /* Wait until the link initialization is complete */
+ do {
+ ctrl = pci_read_config16(udev, upos + LINK_CTRL(uoffs));
+ /* Is this the end of the hypertransport chain? */
+ if (ctrl & (1 << 6)) {
+ break;
+ }
+ /* Has the link failed */
+ if (ctrl & (1 << 4)) {
+ break;
+ }
+ } while((ctrl & (1 << 5)) == 0);
+
device_t dev = PCI_DEV(bus, 0, 0);
last_unitid = next_unitid;
id = pci_read_config32(dev, PCI_VENDOR_ID);
/* If the chain is enumerated quit */
- if (((id & 0xffff) == 0x0000) || ((id & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0xffff) ||
- (((id >> 16) & 0xffff) == 0x0000)) {
+ if ( (id == 0xffffffff) || (id == 0x00000000) ||
+ (id == 0x0000ffff) || (id == 0xffff0000))
+ {
break;
}
pos = ht_lookup_slave_capability(dev);
if (!pos) {
- print_err(" HT link capability not found\r\n");
+ print_err("HT link capability not found\r\n");
break;
}
@@ -363,6 +422,7 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus)
flags |= next_unitid & 0x1f;
pci_write_config16(dev, pos + PCI_CAP_FLAGS, flags);
+ /* Note the change in device number */
dev = PCI_DEV(bus, next_unitid, 0);
#if CK804_DEVN_BASE==0
}
@@ -375,9 +435,11 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus)
count = (flags >> 5) & 0x1f;
next_unitid += count;
- /* get ht direction */
- flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS); // double read ??
-
+ /* Find which side of the ht link we are on,
+ * by reading which direction our last write to PCI_CAP_FLAGS
+ * came from.
+ */
+ flags = pci_read_config16(dev, pos + PCI_CAP_FLAGS);
offs = ((flags>>10) & 1) ? PCI_HT_SLAVE1_OFFS : PCI_HT_SLAVE0_OFFS;
/* Setup the Hypertransport link */
@@ -395,9 +457,23 @@ static int ht_setup_chainx(device_t udev, uint8_t upos, uint8_t bus)
uoffs = ( offs != PCI_HT_SLAVE0_OFFS ) ? PCI_HT_SLAVE0_OFFS : PCI_HT_SLAVE1_OFFS;
} while((last_unitid != next_unitid) && (next_unitid <= 0x1f));
+
return reset_needed;
}
+static int ht_setup_chain(device_t udev, unsigned upos)
+{
+ /* Assumption the HT chain that is bus 0 has the HT I/O Hub on it.
+ * On most boards this just happens. If a cpu has multiple
+ * non Coherent links the appropriate bus registers for the
+ * links needs to be programed to point at bus 0.
+ */
+
+ /* Make certain the HT bus is not enumerated */
+ ht_collapse_previous_enumeration(0);
+
+ return ht_setup_chainx(udev, upos, 0);
+}
static int optimize_link_read_pointer(uint8_t node, uint8_t linkn, uint8_t linkt, uint8_t val)
{
uint32_t dword, dword_old;
@@ -444,7 +520,7 @@ static int optimize_link_in_coherent(uint8_t ht_c_num)
reg = pci_read_config32( PCI_DEV(busn, 1, 0), PCI_VENDOR_ID);
if ( (reg & 0xffff) == PCI_VENDOR_ID_AMD) {
val = 0x25;
- } else if ( (reg & 0xffff) == 0x10de ) {
+ } else if ( (reg & 0xffff) == PCI_VENDOR_ID_NVIDIA ) {
val = 0x25;//???
} else {
continue;
@@ -477,6 +553,9 @@ static int ht_setup_chains(uint8_t ht_c_num)
unsigned regpos;
uint32_t dword;
uint8_t busn;
+ #if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
+ unsigned bus;
+ #endif
reg = pci_read_config32(PCI_DEV(0,0x18,1), 0xe0 + i * 4);
@@ -498,7 +577,11 @@ static int ht_setup_chains(uint8_t ht_c_num)
reset_needed |= ht_setup_chainx(udev,upos,busn);
-
+ #if (USE_DCACHE_RAM == 1) && (K8_SCAN_PCI_BUS == 1)
+ /* You can use use this in romcc, because there is function call in romcc, recursive will kill you */
+ bus = busn; // we need 32 bit
+ reset_needed |= (scan_pci_bus(bus)>>16); // take out reset_needed that stored in upword
+ #endif
}
reset_needed |= optimize_link_in_coherent(ht_c_num);
@@ -506,6 +589,10 @@ static int ht_setup_chains(uint8_t ht_c_num)
return reset_needed;
}
+#ifndef K8_ALLOCATE_IO_RANGE
+ #define K8_ALLOCATE_IO_RANGE 0
+#endif
+
static int ht_setup_chains_x(void)
{
uint8_t nodeid;
@@ -514,18 +601,34 @@ static int ht_setup_chains_x(void)
uint8_t next_busn;
uint8_t ht_c_num;
uint8_t nodes;
+#if K8_ALLOCATE_IO_RANGE == 1
+ unsigned next_io_base;
+#endif
/* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */
reg = pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64);
- /* update PCI_DEV(0, 0x18, 1) 0xe0 to 0x05000m03, and next_busn=5+1 */
+ /* update PCI_DEV(0, 0x18, 1) 0xe0 to 0x05000m03, and next_busn=0x3f+1 */
print_linkn_in("SBLink=", ((reg>>8) & 3) );
- tempreg = 3 | ( 0<<4) | (((reg>>8) & 3)<<8) | (0<<16)| (5<<24);
+ tempreg = 3 | ( 0<<4) | (((reg>>8) & 3)<<8) | (0<<16)| (0x3f<<24);
pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0, tempreg);
- next_busn=5+1; /* 0 will be used ht chain with SB we need to keep SB in bus0 in auto stage*/
+ next_busn=0x3f+1; /* 0 will be used ht chain with SB we need to keep SB in bus0 in auto stage*/
+
+#if K8_ALLOCATE_IO_RANGE == 1
+ /* io range allocation */
+ tempreg = 0 | (((reg>>8) & 0x3) << 4 )| (0x3<<12); //limit
+ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC4, tempreg);
+ tempreg = 3 | ( 3<<4) | (0<<12); //base
+ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC0, tempreg);
+ next_io_base = 0x3+0x1;
+#endif
+
/* clean others */
for(ht_c_num=1;ht_c_num<4; ht_c_num++) {
pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, 0);
+ /* io range allocation */
+ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xc4 + ht_c_num * 8, 0);
+ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xc0 + ht_c_num * 8, 0);
}
nodes = ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1;
@@ -548,13 +651,23 @@ static int ht_setup_chains_x(void)
break;
}
}
- if(ht_c_num == 4) break; /*used up onle 4 non conherent allowed*/
+ if(ht_c_num == 4) break; /*used up only 4 non conherent allowed*/
/*update to 0xe0...*/
if((reg & 0xf) == 3) continue; /*SbLink so don't touch it */
print_linkn_in("\tbusn=", next_busn);
- tempreg |= (next_busn<<16)|((next_busn+5)<<24);
+ tempreg |= (next_busn<<16)|((next_busn+0x3f)<<24);
pci_write_config32(PCI_DEV(0, 0x18, 1), 0xe0 + ht_c_num * 4, tempreg);
- next_busn+=5+1;
+ next_busn+=0x3f+1;
+
+#if K8_ALLOCATE_IO_RANGE == 1
+ /* io range allocation */
+ tempreg = nodeid | (linkn<<4) | ((next_io_base+0x3)<<12); //limit
+ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC4 + ht_c_num * 8, tempreg);
+ tempreg = 3 | ( 3<<4) | (next_io_base<<12); //base
+ pci_write_config32(PCI_DEV(0, 0x18, 1), 0xC0 + ht_c_num * 8, tempreg);
+ next_io_base += 0x3+0x1;
+#endif
+
}
}
/*update 0xe0, 0xe4, 0xe8, 0xec from PCI_DEV(0, 0x18,1) to PCI_DEV(0, 0x19,1) to PCI_DEV(0, 0x1f,1);*/
@@ -568,8 +681,23 @@ static int ht_setup_chains_x(void)
regpos = 0xe0 + i * 4;
reg = pci_read_config32(PCI_DEV(0, 0x18, 1), regpos);
pci_write_config32(dev, regpos, reg);
+ }
+#if K8_ALLOCATE_IO_RANGE == 1
+ /* io range allocation */
+ for(i = 0; i< 4; i++) {
+ unsigned regpos;
+ regpos = 0xc4 + i * 8;
+ reg = pci_read_config32(PCI_DEV(0, 0x18, 1), regpos);
+ pci_write_config32(dev, regpos, reg);
}
+ for(i = 0; i< 4; i++) {
+ unsigned regpos;
+ regpos = 0xc0 + i * 8;
+ reg = pci_read_config32(PCI_DEV(0, 0x18, 1), regpos);
+ pci_write_config32(dev, regpos, reg);
+ }
+#endif
}
/* recount ht_c_num*/
diff --git a/src/northbridge/amd/amdk8/misc_control.c b/src/northbridge/amd/amdk8/misc_control.c
index 4ac6ef473d..4cd3d0d42d 100644
--- a/src/northbridge/amd/amdk8/misc_control.c
+++ b/src/northbridge/amd/amdk8/misc_control.c
@@ -187,7 +187,10 @@ static void misc_control_init(struct device *dev)
/* This works on an Athlon64 because unimplemented links return 0 */
reg = 0x98 + (link * 0x20);
link_type = pci_read_config32(f0_dev, reg);
- if ((link_type & 7) == 3) { /* Only handle coherent link here */
+ /* Only handle coherent link here please */
+ if ((link_type & (LinkConnected|InitComplete|NonCoherent))
+ == (LinkConnected|InitComplete))
+ {
cmd &= ~(0xff << (link *8));
/* FIXME this assumes the device on the other side is an AMD device */
cmd |= 0x25 << (link *8);
diff --git a/src/northbridge/amd/amdk8/northbridge.c b/src/northbridge/amd/amdk8/northbridge.c
index 89602f37a6..e45aff8242 100644
--- a/src/northbridge/amd/amdk8/northbridge.c
+++ b/src/northbridge/amd/amdk8/northbridge.c
@@ -40,7 +40,7 @@ static device_t __f1_dev[FX_DEVS];
static void debug_fx_devs(void)
{
int i;
- for (i = 0; i < FX_DEVS; i++) {
+ for(i = 0; i < FX_DEVS; i++) {
device_t dev;
dev = __f0_dev[i];
if (dev) {
@@ -62,7 +62,7 @@ static void get_fx_devs(void)
if (__f1_dev[0]) {
return;
}
- for (i = 0; i < FX_DEVS; i++) {
+ for(i = 0; i < FX_DEVS; i++) {
__f0_dev[i] = dev_find_slot(0, PCI_DEVFN(0x18 + i, 0));
__f1_dev[i] = dev_find_slot(0, PCI_DEVFN(0x18 + i, 1));
}
@@ -81,7 +81,7 @@ static void f1_write_config32(unsigned reg, uint32_t value)
{
int i;
get_fx_devs();
- for (i = 0; i < FX_DEVS; i++) {
+ for(i = 0; i < FX_DEVS; i++) {
device_t dev;
dev = __f1_dev[i];
if (dev && dev->enabled) {
@@ -102,9 +102,9 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
nodeid = amdk8_nodeid(dev);
#if 0
printk_debug("%s amdk8_scan_chains max: %d starting...\n",
- dev_path(dev), max);
+ dev_path(dev), max);
#endif
- for (link = 0; link < dev->links; link++) {
+ for(link = 0; link < dev->links; link++) {
uint32_t link_type;
uint32_t busses, config_busses;
unsigned free_reg, config_reg;
@@ -122,9 +122,10 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
continue;
}
/* See if there is an available configuration space mapping
- * register in function 1. */
+ * register in function 1.
+ */
free_reg = 0;
- for (config_reg = 0xe0; config_reg <= 0xec; config_reg += 4) {
+ for(config_reg = 0xe0; config_reg <= 0xec; config_reg += 4) {
uint32_t config;
config = f1_read_config32(config_reg);
if (!free_reg && ((config & 3) == 0)) {
@@ -132,8 +133,8 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
continue;
}
if (((config & 3) == 3) &&
- (((config >> 4) & 7) == nodeid) &&
- (((config >> 8) & 3) == link)) {
+ (((config >> 4) & 7) == nodeid) &&
+ (((config >> 8) & 3) == link)) {
break;
}
}
@@ -141,7 +142,8 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
config_reg = free_reg;
}
/* If we can't find an available configuration space mapping
- * register skip this bus */
+ * register skip this bus
+ */
if (config_reg > 0xec) {
continue;
}
@@ -158,15 +160,15 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
*/
busses = pci_read_config32(dev, dev->link[link].cap + 0x14);
config_busses = f1_read_config32(config_reg);
-
+
/* Configure the bus numbers for this bridge: the configuration
* transactions will not be propagates by the bridge if it is
* not correctly configured
*/
busses &= 0xff000000;
busses |= (((unsigned int)(dev->bus->secondary) << 0) |
- ((unsigned int)(dev->link[link].secondary) << 8) |
- ((unsigned int)(dev->link[link].subordinate) << 16));
+ ((unsigned int)(dev->link[link].secondary) << 8) |
+ ((unsigned int)(dev->link[link].subordinate) << 16));
pci_write_config32(dev, dev->link[link].cap + 0x14, busses);
config_busses &= 0x000fc88;
@@ -183,13 +185,14 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
dev_path(dev), link, max);
#endif
/* Now we can scan all of the subordinate busses i.e. the
- * chain on the hypertranport link */
- max = hypertransport_scan_chain(&dev->link[link], max);
+ * chain on the hypertranport link
+ */
+ max = hypertransport_scan_chain(&dev->link[link], 0, 0xbf, max);
#if 0
printk_debug("%s Hyper transport scan link: %d new max: %d\n",
dev_path(dev), link, max);
-#endif
+#endif
/* We know the number of busses behind this bridge. Set the
* subordinate bus number to it's real value
@@ -202,6 +205,7 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
config_busses = (config_busses & 0x00ffffff) |
(dev->link[link].subordinate << 24);
f1_write_config32(config_reg, config_busses);
+
#if 0
printk_debug("%s Hypertransport scan link: %d done\n",
dev_path(dev), link);
@@ -214,32 +218,34 @@ static unsigned int amdk8_scan_chains(device_t dev, unsigned int max)
return max;
}
-static int reg_useable(unsigned reg, device_t goal_dev, unsigned goal_nodeid,
- unsigned goal_link)
+static int reg_useable(unsigned reg,
+ device_t goal_dev, unsigned goal_nodeid, unsigned goal_link)
{
struct resource *res;
unsigned nodeid, link;
int result;
res = 0;
- for (nodeid = 0; !res && (nodeid < 8); nodeid++) {
+ for(nodeid = 0; !res && (nodeid < 8); nodeid++) {
device_t dev;
dev = __f0_dev[nodeid];
- for (link = 0; !res && (link < 3); link++) {
+ for(link = 0; !res && (link < 3); link++) {
res = probe_resource(dev, 0x100 + (reg | link));
}
}
result = 2;
if (res) {
result = 0;
- if ((goal_link == (link - 1)) &&
- (goal_nodeid == (nodeid - 1)) &&
- (res->flags <= 1)) {
+ if ( (goal_link == (link - 1)) &&
+ (goal_nodeid == (nodeid - 1)) &&
+ (res->flags <= 1)) {
result = 1;
}
}
#if 0
printk_debug("reg: %02x result: %d gnodeid: %u glink: %u nodeid: %u link: %u\n",
- reg, result, goal_nodeid, goal_link, nodeid, link);
+ reg, result,
+ goal_nodeid, goal_link,
+ nodeid, link);
#endif
return result;
}
@@ -250,7 +256,7 @@ static struct resource *amdk8_find_iopair(device_t dev, unsigned nodeid, unsigne
unsigned free_reg, reg;
resource = 0;
free_reg = 0;
- for (reg = 0xc0; reg <= 0xd8; reg += 0x8) {
+ for(reg = 0xc0; reg <= 0xd8; reg += 0x8) {
int result;
result = reg_useable(reg, dev, nodeid, link);
if (result == 1) {
@@ -277,7 +283,7 @@ static struct resource *amdk8_find_mempair(device_t dev, unsigned nodeid, unsign
unsigned free_reg, reg;
resource = 0;
free_reg = 0;
- for (reg = 0x80; reg <= 0xb8; reg += 0x8) {
+ for(reg = 0x80; reg <= 0xb8; reg += 0x8) {
int result;
result = reg_useable(reg, dev, nodeid, link);
if (result == 1) {
@@ -348,7 +354,7 @@ static void amdk8_read_resources(device_t dev)
{
unsigned nodeid, link;
nodeid = amdk8_nodeid(dev);
- for (link = 0; link < dev->links; link++) {
+ for(link = 0; link < dev->links; link++) {
if (dev->link[link].children) {
amdk8_link_read_bases(dev, nodeid, link);
}
@@ -499,11 +505,11 @@ static void amdk8_set_resources(device_t dev)
amdk8_create_vga_resource(dev, nodeid);
/* Set each resource we have found */
- for (i = 0; i < dev->resources; i++) {
+ for(i = 0; i < dev->resources; i++) {
amdk8_set_resource(dev, &dev->resource[i], nodeid);
}
- for (link = 0; link < dev->links; link++) {
+ for(link = 0; link < dev->links; link++) {
struct bus *bus;
bus = &dev->link[link];
if (bus->children) {
@@ -520,26 +526,9 @@ static void amdk8_enable_resources(device_t dev)
static void mcf0_control_init(struct device *dev)
{
- uint32_t cmd;
-
#if 0
printk_debug("NB: Function 0 Misc Control.. ");
#endif
-#if 1
- /* improve latency and bandwith on HT */
- cmd = pci_read_config32(dev, 0x68);
- cmd &= 0xffff80ff;
- cmd |= 0x00004800;
- pci_write_config32(dev, 0x68, cmd );
-#endif
-
-#if 0
- /* over drive the ht port to 1000 Mhz */
- cmd = pci_read_config32(dev, 0xa8);
- cmd &= 0xfffff0ff;
- cmd |= 0x00000600;
- pci_write_config32(dev, 0xdc, cmd );
-#endif
#if 0
printk_debug("done.\n");
#endif
@@ -578,7 +567,7 @@ static void pci_domain_read_resources(device_t dev)
/* Find the already assigned resource pairs */
get_fx_devs();
- for (reg = 0x80; reg <= 0xd8; reg+= 0x08) {
+ for(reg = 0x80; reg <= 0xd8; reg+= 0x08) {
uint32_t base, limit;
base = f1_read_config32(reg);
limit = f1_read_config32(reg + 0x04);
@@ -612,8 +601,8 @@ static void pci_domain_read_resources(device_t dev)
resource->flags = IORESOURCE_MEM | IORESOURCE_SUBTRACTIVE | IORESOURCE_ASSIGNED;
}
-static void ram_resource(device_t dev, unsigned long index,
- unsigned long basek, unsigned long sizek)
+static void ram_resource(device_t dev, unsigned long index,
+ unsigned long basek, unsigned long sizek)
{
struct resource *resource;
@@ -691,7 +680,7 @@ static void pci_domain_set_resources(device_t dev)
#endif
idx = 10;
- for (i = 0; i < 8; i++) {
+ for(i = 0; i < 8; i++) {
uint32_t base, limit;
unsigned basek, limitk, sizek;
base = f1_read_config32(0x40 + (i << 3));
@@ -737,11 +726,35 @@ static void pci_domain_set_resources(device_t dev)
static unsigned int pci_domain_scan_bus(device_t dev, unsigned int max)
{
unsigned reg;
+ int i;
/* Unmap all of the HT chains */
- for (reg = 0xe0; reg <= 0xec; reg += 4) {
+ for(reg = 0xe0; reg <= 0xec; reg += 4) {
f1_write_config32(reg, 0);
}
max = pci_scan_bus(&dev->link[0], PCI_DEVFN(0x18, 0), 0xff, max);
+
+ /* Tune the hypertransport transaction for best performance.
+ * Including enabling relaxed ordering if it is safe.
+ */
+ get_fx_devs();
+ for(i = 0; i < FX_DEVS; i++) {
+ device_t f0_dev;
+ f0_dev = __f0_dev[i];
+ if (f0_dev && f0_dev->enabled) {
+ uint32_t httc;
+ int j;
+ httc = pci_read_config32(f0_dev, HT_TRANSACTION_CONTROL);
+ httc &= ~HTTC_RSP_PASS_PW;
+ if (!dev->link[0].disable_relaxed_ordering) {
+ httc |= HTTC_RSP_PASS_PW;
+ }
+ printk_spew("%s passpw: %s\n",
+ dev_path(dev),
+ (!dev->link[0].disable_relaxed_ordering)?
+ "enabled":"disabled");
+ pci_write_config32(f0_dev, HT_TRANSACTION_CONTROL, httc);
+ }
+ }
return max;
}
@@ -755,20 +768,34 @@ static struct device_operations pci_domain_ops = {
};
#define APIC_ID_OFFSET 0x10
+
static unsigned int cpu_bus_scan(device_t dev, unsigned int max)
{
struct bus *cpu_bus;
device_t dev_mc;
+ int bsp_apic_id;
+ int apic_id_offset;
int i,j;
- unsigned nb_cfg_54 = 0;
- unsigned siblings = 0;
- int enable_apic_ext_id = 0;
- int bsp_apic_id = lapicid(); // bsp apicid
- int apic_id_offset = bsp_apic_id;
+ unsigned nb_cfg_54;
+ int enable_apic_ext_id;
+ unsigned siblings;
+#if CONFIG_LOGICAL_CPUS == 1
+ int e0_later_single_core;
+ int disable_siblings;
+#endif
-#if CONFIG_LOGICAL_CPUS==1
- int e0_later_single_core;
- int disable_siblings = !CONFIG_LOGICAL_CPUS;
+ nb_cfg_54 = 0;
+ enable_apic_ext_id = 0;
+ siblings = 0;
+
+ /* Find the bootstrap processors apicid */
+ bsp_apic_id = lapicid();
+
+ /* See if I will enable extended ids' */
+ apic_id_offset = bsp_apic_id;
+
+#if CONFIG_LOGICAL_CPUS == 1
+ disable_siblings = !CONFIG_LOGICAL_CPUS;
get_option(&disable_siblings, "dual_core");
// for pre_e0, nb_cfg_54 can not be set, ( even set, when you read it still be 0)
@@ -776,45 +803,42 @@ static unsigned int cpu_bus_scan(device_t dev, unsigned int max)
nb_cfg_54 = read_nb_cfg_54();
#endif
-
dev_mc = dev_find_slot(0, PCI_DEVFN(0x18, 0));
- if(pci_read_config32(dev_mc, 0x68) & ( HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST)) {
+ if (!dev_mc) {
+ die("0:18.0 not found?");
+ }
+ if (pci_read_config32(dev_mc, 0x68) & (HTTC_APIC_EXT_ID|HTTC_APIC_EXT_BRD_CST))
+ {
enable_apic_ext_id = 1;
- if(apic_id_offset==0) { //bsp apic id is not changed
+ if (apic_id_offset == 0) {
+ /* bsp apic id is not changed */
apic_id_offset = APIC_ID_OFFSET;
}
}
-
/* Find which cpus are present */
cpu_bus = &dev->link[0];
- for (i = 0; i < 8; i++) {
+ for(i = 0; i < 8; i++) {
device_t dev, cpu;
struct device_path cpu_path;
- /* Find the cpu's memory controller */
+ /* Find the cpu's pci device */
dev = dev_find_slot(0, PCI_DEVFN(0x18 + i, 3));
- if(!dev) { // in case we move apic cluser before pci_domain and not set that for second CPU
- for(j=0; j<4; j++) {
- struct device dummy;
- uint32_t id;
- dummy.bus = dev_mc->bus;
- dummy.path.type = DEVICE_PATH_PCI;
- dummy.path.u.pci.devfn = PCI_DEVFN(0x18 + i, j);
- id = pci_read_config32(&dummy, PCI_VENDOR_ID);
- if (id != 0xffffffff && id != 0x00000000 &&
- id != 0x0000ffff && id != 0xffff0000) {
- //create that for it
- dev = alloc_dev(dev_mc->bus, &dummy.path);
- }
+ if (!dev) {
+ /* If I am probing things in a weird order
+ * ensure all of the cpu's pci devices are found.
+ */
+ int j;
+ for(j = 0; j <= 3; j++) {
+ dev = pci_probe_dev(NULL, dev_mc->bus,
+ PCI_DEVFN(0x18 + i, j));
}
}
-#if CONFIG_LOGICAL_CPUS==1
+#if CONFIG_LOGICAL_CPUS == 1
e0_later_single_core = 0;
- if((!disable_siblings) && dev && dev->enabled) {
- j = (pci_read_config32(dev, 0xe8) >> 12) & 3; //dev is func 3
-
+ if ((!disable_siblings) && dev && dev->enabled) {
+ j = (pci_read_config32(dev, 0xe8) >> 12) & 3; // dev is func 3
printk_debug(" %s siblings=%d\r\n", dev_path(dev), j);
if(nb_cfg_54) {
@@ -843,51 +867,49 @@ static unsigned int cpu_bus_scan(device_t dev, unsigned int max)
}
} else {
siblings = j;
- }
+ }
}
#endif
-
#if CONFIG_LOGICAL_CPUS==1
for (j = 0; j <= (e0_later_single_core?0:siblings); j++ ) {
#else
- for (j = 0; j <= siblings; j++ ) {
+ for (j = 0; j <= siblings; j++ ) {
#endif
- /* Build the cpu device path */
- cpu_path.type = DEVICE_PATH_APIC;
- cpu_path.u.apic.apic_id = i * (nb_cfg_54?(siblings+1):1) + j * (nb_cfg_54?1:8);
-
- /* See if I can find the cpu */
- cpu = find_dev_path(cpu_bus, &cpu_path);
-
- /* Enable the cpu if I have the processor */
- if (dev && dev->enabled) {
- if (!cpu) {
- cpu = alloc_dev(cpu_bus, &cpu_path);
- }
- if (cpu) {
- cpu->enabled = 1;
- }
- }
-
- /* Disable the cpu if I don't have the processor */
- if (cpu && (!dev || !dev->enabled)) {
- cpu->enabled = 0;
- }
-
- /* Report what I have done */
- if (cpu) {
- if(enable_apic_ext_id) {
- if(cpu->path.u.apic.apic_id<apic_id_offset) { //all add offset except bsp core0
- if( (cpu->path.u.apic.apic_id > siblings) || (bsp_apic_id!=0) )
- cpu->path.u.apic.apic_id += apic_id_offset;
- }
+ /* Build the cpu device path */
+ cpu_path.type = DEVICE_PATH_APIC;
+ cpu_path.u.apic.apic_id = i * (nb_cfg_54?(siblings+1):1) + j * (nb_cfg_54?1:8);
+
+ /* See if I can find the cpu */
+ cpu = find_dev_path(cpu_bus, &cpu_path);
+
+ /* Enable the cpu if I have the processor */
+ if (dev && dev->enabled) {
+ if (!cpu) {
+ cpu = alloc_dev(cpu_bus, &cpu_path);
}
- printk_debug("CPU: %s %s\n",
- dev_path(cpu), cpu->enabled?"enabled":"disabled");
- }
- } //j
+ if (cpu) {
+ cpu->enabled = 1;
+ }
+ }
+
+ /* Disable the cpu if I don't have the processor */
+ if (cpu && (!dev || !dev->enabled)) {
+ cpu->enabled = 0;
+ }
+
+ /* Report what I have done */
+ if (cpu) {
+ if(enable_apic_ext_id) {
+ if(cpu->path.u.apic.apic_id<apic_id_offset) { //all add offset except bsp core0
+ if( (cpu->path.u.apic.apic_id > siblings) || (bsp_apic_id!=0) )
+ cpu->path.u.apic.apic_id += apic_id_offset;
+ }
+ }
+ printk_debug("CPU: %s %s\n",
+ dev_path(cpu), cpu->enabled?"enabled":"disabled");
+ }
+ } //j
}
-
return max;
}
diff --git a/src/northbridge/amd/amdk8/setup_resource_map.c b/src/northbridge/amd/amdk8/setup_resource_map.c
index ebd1978a7c..27da719409 100644
--- a/src/northbridge/amd/amdk8/setup_resource_map.c
+++ b/src/northbridge/amd/amdk8/setup_resource_map.c
@@ -1,16 +1,53 @@
#define RES_DEBUG 0
+static void setup_resource_map_offset(const unsigned int *register_values, int max, unsigned offset_pci_dev, unsigned offset_io_base)
+{
+ int i;
+// print_debug("setting up resource map offset....");
+#if 0
+ print_debug("\r\n");
+#endif
+ for(i = 0; i < max; i += 3) {
+ device_t dev;
+ unsigned where;
+ unsigned long reg;
+#if 0
+ #if CONFIG_USE_INIT
+ prink_debug("%08x <- %08x\r\n", register_values[i] + offset_pci_dev, register_values[i+2]);
+ #else
+ print_debug_hex32(register_values[i] + offset_pci_dev);
+ print_debug(" <-");
+ print_debug_hex32(register_values[i+2]);
+ print_debug("\r\n");
+ #endif
+#endif
+ dev = (register_values[i] & ~0xff) + offset_pci_dev;
+ where = register_values[i] & 0xff;
+ reg = pci_read_config32(dev, where);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2] + offset_io_base;
+ pci_write_config32(dev, where, reg);
+#if 0
+ reg = pci_read_config32(register_values[i]);
+ reg &= register_values[i+1];
+ reg |= register_values[i+2] & ~register_values[i+1];
+ pci_write_config32(register_values[i], reg);
+#endif
+ }
+// print_debug("done.\r\n");
+}
+
#define RES_PCI_IO 0x10
#define RES_PORT_IO_8 0x22
#define RES_PORT_IO_32 0x20
-#define RES_MEM_IO 0x30
+#define RES_MEM_IO 0x40
-static void setup_resource_map_x(const unsigned int *register_values, int max)
+static void setup_resource_map_x_offset(const unsigned int *register_values, int max, unsigned offset_pci_dev, unsigned offset_io_base)
{
int i;
#if RES_DEBUG
- print_debug("setting up resource map ex....");
+ print_debug("setting up resource map ex offset....");
#endif
@@ -21,17 +58,23 @@ static void setup_resource_map_x(const unsigned int *register_values, int max)
#if RES_DEBUG
#if CONFIG_USE_INIT
printk_debug("%04x: %02x %08x <- & %08x | %08x\r\n",
- i/4, register_values[i],register_values[i+1], register_values[i+2], register_values[i+3]);
+ i/4, register_values[i],
+ register_values[i+1] + ( (register_values[i]==RES_PCI_IO) ? offset_pci_dev : 0),
+ register_values[i+2],
+ register_values[i+3] + ( ( (register_values[i] & RES_PORT_IO_32) == RES_PORT_IO_32) ? offset_io_base : 0)
+ );
#else
print_debug_hex16(i/4);
print_debug(": ");
print_debug_hex8(register_values[i]);
print_debug(" ");
- print_debug_hex32(register_values[i+1]);
+ print_debug_hex32(register_values[i+1] + ( (register_values[i]==RES_PCI_IO) ? offset_pci_dev : 0) );
print_debug(" <- & ");
print_debug_hex32(register_values[i+2]);
print_debug(" | ");
- print_debug_hex32(register_values[i+3]);
+ print_debug_hex32(register_values[i+3] +
+ (((register_values[i] & RES_PORT_IO_32) == RES_PORT_IO_32) ? offset_io_base : 0)
+ );
print_debug("\r\n");
#endif
#endif
@@ -41,7 +84,7 @@ static void setup_resource_map_x(const unsigned int *register_values, int max)
device_t dev;
unsigned where;
unsigned long reg;
- dev = register_values[i+1] & ~0xff;
+ dev = (register_values[i+1] & ~0xff) + offset_pci_dev;
where = register_values[i+1] & 0xff;
reg = pci_read_config32(dev, where);
reg &= register_values[i+2];
@@ -53,7 +96,7 @@ static void setup_resource_map_x(const unsigned int *register_values, int max)
{
unsigned where;
unsigned reg;
- where = register_values[i+1];
+ where = register_values[i+1] + offset_io_base;
reg = inb(where);
reg &= register_values[i+2];
reg |= register_values[i+3];
@@ -64,7 +107,7 @@ static void setup_resource_map_x(const unsigned int *register_values, int max)
{
unsigned where;
unsigned long reg;
- where = register_values[i+1];
+ where = register_values[i+1] + offset_io_base;
reg = inl(where);
reg &= register_values[i+2];
reg |= register_values[i+3];
@@ -94,7 +137,95 @@ static void setup_resource_map_x(const unsigned int *register_values, int max)
print_debug("done.\r\n");
#endif
}
+static void setup_resource_map_x(const unsigned int *register_values, int max)
+{
+ int i;
+#if RES_DEBUG
+ print_debug("setting up resource map ex offset....");
+
+#endif
+
+#if RES_DEBUG
+ print_debug("\r\n");
+#endif
+ for(i = 0; i < max; i += 4) {
+#if RES_DEBUG
+ #if CONFIG_USE_INIT
+ printk_debug("%04x: %02x %08x <- & %08x | %08x\r\n",
+ i/4, register_values[i],register_values[i+1], register_values[i+2], register_values[i+3]);
+ #else
+ print_debug_hex16(i/4);
+ print_debug(": ");
+ print_debug_hex8(register_values[i]);
+ print_debug(" ");
+ print_debug_hex32(register_values[i+1]);
+ print_debug(" <- & ");
+ print_debug_hex32(register_values[i+2]);
+ print_debug(" | ");
+ print_debug_hex32(register_values[i+3]);
+ print_debug("\r\n");
+ #endif
+#endif
+ switch (register_values[i]) {
+ case RES_PCI_IO: //PCI
+ {
+ device_t dev;
+ unsigned where;
+ unsigned long reg;
+ dev = register_values[i+1] & ~0xff;
+ where = register_values[i+1] & 0xff;
+ reg = pci_read_config32(dev, where);
+ reg &= register_values[i+2];
+ reg |= register_values[i+3];
+ pci_write_config32(dev, where, reg);
+ }
+ break;
+ case RES_PORT_IO_8: // io 8
+ {
+ unsigned where;
+ unsigned reg;
+ where = register_values[i+1];
+ reg = inb(where);
+ reg &= register_values[i+2];
+ reg |= register_values[i+3];
+ outb(reg, where);
+ }
+ break;
+ case RES_PORT_IO_32: //io32
+ {
+ unsigned where;
+ unsigned long reg;
+ where = register_values[i+1];
+ reg = inl(where);
+ reg &= register_values[i+2];
+ reg |= register_values[i+3];
+ outl(reg, where);
+ }
+ break;
+#if 0
+ case RES_MEM_IO: //mem
+ {
+ unsigned where;
+ unsigned long reg;
+ where = register_values[i+1];
+ reg = read32(where);
+ reg &= register_values[i+2];
+ reg |= register_values[i+3];
+ write32( where, reg);
+ }
+ break;
+#endif
+
+ } // switch
+
+
+ }
+
+#if RES_DEBUG
+ print_debug("done.\r\n");
+#endif
+}
static void setup_iob_resource_map(const unsigned int *register_values, int max)
{