diff options
author | Caesar Wang <wxt@rock-chips.com> | 2017-05-24 18:02:25 +0800 |
---|---|---|
committer | Julius Werner <jwerner@chromium.org> | 2017-06-15 20:45:02 +0200 |
commit | 212a026ca4ba4e6dca3c7f868c1ee38666e20b5d (patch) | |
tree | 8a73d0e8a78a6ac14cf7809c65cd5c638bafcd25 /src/northbridge/amd/pi | |
parent | 9aca643ccb69db959906c5c233df9cd1807f5cf0 (diff) |
google/gru: drive the stronger pull-up for touchpad
As the hardware designed on gru, the AP_I2C_TP_PU_EN (gpio3_b4) controlled
the SCL/SDA status to avoid leakage. And the gpio3_b4 of rk3399 pull
resistor is 26k~71k and 3.3v for supply power, and gpio3_b4 pin connected
2.2k resistor to i2c of TP device.
The default of this gpio status is pulled up during the start to bootup,
it's very weak drive for the TP device that maybe cause to trigger the
recovery process of elan's firmware.
Also, the Elan updated its firmware(102.0.5.0) to delay checking the
i2c of touchpad is greater than 1 second.
So we have to drive the stronger pull-up within 1 second of powering up
the touchpad to prevent its firmware from falling into recovery.
Change-Id: I9a67d1c041afafde24ed9f00716ba41a9b41a8da
Signed-off-by: Caesar Wang <wxt@rock-chips.com>
Reviewed-on: https://review.coreboot.org/19863
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Diffstat (limited to 'src/northbridge/amd/pi')
0 files changed, 0 insertions, 0 deletions