Remove the coherent_ht_car.c file. It is exactly the same as

coherent_ht.c (save one empty line removed) so there's no use
to keep it around.

Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Acked-by: Marc Jones <marc.jones@amd.com>



git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2998 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1

1 files changed, 0 insertions, 1838 deletions

diff --git a/src/northbridge/amd/amdk8/coherent_ht_car.c b/src/northbridge/amd/amdk8/coherent_ht_car.c
deleted file mode 100644
index 55a2a77bd3..0000000000
--- a/src/northbridge/amd/amdk8/coherent_ht_car.c
+++ /dev/null
@@ -1,1838 +0,0 @@
-/* coherent hypertransport initialization for AMD64 
- * 
- * written by Stefan Reinauer <stepan@openbios.org>
- * (c) 2003-2004 by SuSE Linux AG
- *
- * (c) 2004 Tyan Computer
- *  2004.12 yhlu added support to create routing table dynamically.
- *          it also support 8 ways too. (8 ways ladder or 8 ways crossbar)
- *
- * This code is licensed under GPL.
- */
-
-/*
- * This algorithm assumes a grid configuration as follows:
- *
- * nodes :  1    2    4    6    8
- * org.  :  1x1  2x1  2x2  2x3  2x4
- Ladder:
-			CPU7-------------CPU6 
-			|                |    
-			|                |
-			|                | 
-			|                |     
-			|                |        
-			|                |    
-			CPU5-------------CPU4                    
-			|                |    
-			|                |   
-			|                |  
-			|                |    
-			|                |         
-			|                |       
-			CPU3-------------CPU2              
-			|                |    
-			|                | 
-			|                |
-			|                |
-			|                | 
-			|                |    
-			CPU1-------------CPU0    
- CROSS_BAR_47_56:
-			CPU7-------------CPU6 
-			|  \____    ___/ |    
-			|       \  /     |
-			|        \/      | 
-			|        /\      |     
-			|       /  \     |        
-			|  ____/    \___ |    
-			CPU5             CPU4                    
-			|                |    
-			|                |   
-			|                |  
-			|                |    
-			|                |         
-			|                |       
-			CPU3-------------CPU2              
-			|                |    
-			|                | 
-			|                |
-			|                |
-			|                | 
-			|                |    
-			CPU1-------------CPU0     	
- */
-
-#include <device/pci_def.h>
-#include <device/pci_ids.h>
-#include <device/hypertransport_def.h>
-#include "arch/romcc_io.h"
-
-#include "amdk8.h"
-
-#define enable_bsp_routing()	enable_routing(0)
-
-#define NODE_HT(x) PCI_DEV(0,24+x,0)
-#define NODE_MP(x) PCI_DEV(0,24+x,1)
-#define NODE_MC(x) PCI_DEV(0,24+x,3)
-
-#define DEFAULT 0x00010101	/* default row entry */
-
-#ifndef CROSS_BAR_47_56
-	#define CROSS_BAR_47_56 0
-#endif
-
-#ifndef TRY_HIGH_FIRST
-	#define TRY_HIGH_FIRST 0
-#endif
-
-#ifndef K8_HT_FREQ_1G_SUPPORT
-	#define K8_HT_FREQ_1G_SUPPORT 0
-#endif
-
-#ifndef K8_HT_CHECK_PENDING_LINK
-	#if CONFIG_MAX_PHYSICAL_CPUS >= 4
-		#define K8_HT_CHECK_PENDING_LINK 1
-	#else
-		#define K8_HT_CHECK_PENDING_LINK 0
-	#endif
-#endif
-
-#ifndef CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED
-	#define CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED 0
-#endif
-
-#ifndef ENABLE_APIC_EXT_ID
-        #define ENABLE_APIC_EXT_ID 0
-#endif
-
-
-static inline void print_linkn (const char *strval, uint8_t byteval) 
-{
-#if 1
-#if CONFIG_USE_PRINTK_IN_CAR
-	printk_debug("%s%02x\r\n", strval, byteval); 
-#else
-	print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n");
-#endif
-#endif
-}
-
-static void disable_probes(void)
-{
-	/* disable read/write/fill probes for uniprocessor setup
-	 * they don't make sense if only one cpu is available
-	 */
-
-	/* Hypetransport Transaction Control Register 
-	 * F0:0x68
-	 * [ 0: 0] Disable read byte probe
-	 *         0 = Probes issues
-	 *         1 = Probes not issued
-	 * [ 1: 1] Disable Read Doubleword probe
-	 *         0 = Probes issued
-	 *         1 = Probes not issued
-	 * [ 2: 2] Disable write byte probes
-	 *         0 = Probes issued
-	 *         1 = Probes not issued
-	 * [ 3: 3] Disable Write Doubleword Probes
-	 *         0 = Probes issued
-	 *         1 = Probes not issued.
-	 * [10:10] Disable Fill Probe
-	 *         0 = Probes issued for cache fills
-	 *         1 = Probes not issued for cache fills.
-	 */
-
-	u32 val;
-
-	print_spew("Disabling read/write/fill probes for UP... ");
-
-	val=pci_read_config32(NODE_HT(0), HT_TRANSACTION_CONTROL);
-	val |= HTTC_DIS_FILL_P | HTTC_DIS_RMT_MEM_C | HTTC_DIS_P_MEM_C |
-		HTTC_DIS_MTS | HTTC_DIS_WR_DW_P | HTTC_DIS_WR_B_P | 
-		HTTC_DIS_RD_DW_P | HTTC_DIS_RD_B_P;
-	pci_write_config32(NODE_HT(0), HT_TRANSACTION_CONTROL, val);
-
-	print_spew("done.\r\n");
-
-}
-
-static void enable_apic_ext_id(u8 node) 
-{
-#if ENABLE_APIC_EXT_ID==1
-#warning "FIXME Is the right place to enable apic ext id here?"
-
-      u32 val;
-
-        val = pci_read_config32(NODE_HT(node), 0x68);
-        val |= (HTTC_APIC_EXT_SPUR | HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST);
-        pci_write_config32(NODE_HT(node), 0x68, val);
-#endif
-}
-
-static void enable_routing(u8 node)
-{
-	u32 val;
-
-	/* HT Initialization Control Register
-	 * F0:0x6C
-	 * [ 0: 0] Routing Table Disable
-	 *         0 = Packets are routed according to routing tables
-	 *         1 = Packets are routed according to the default link field
-	 * [ 1: 1] Request Disable (BSP should clear this)
-	 *         0 = Request packets may be generated
-	 *         1 = Request packets may not be generated.
-	 * [ 3: 2] Default Link (Read-only)
-	 *         00 = LDT0
-	 *         01 = LDT1
-	 *         10 = LDT2
-	 *         11 = CPU on same node
-	 * [ 4: 4] Cold Reset
-	 *         - Scratch bit cleared by a cold reset
-	 * [ 5: 5] BIOS Reset Detect
-	 *         - Scratch bit cleared by a cold reset
-	 * [ 6: 6] INIT Detect
-	 *         - Scratch bit cleared by a warm or cold reset not by an INIT
-	 *
-	 */
-
-	/* Enable routing table */
-	print_spew("Enabling routing table for node ");
-	print_spew_hex8(node);
-
-	val=pci_read_config32(NODE_HT(node), 0x6c);
-	val &= ~((1<<1)|(1<<0));
-	pci_write_config32(NODE_HT(node), 0x6c, val);
-
-	print_spew(" done.\r\n");
-}
-
-static void fill_row(u8 node, u8 row, u32 value)
-{
-	pci_write_config32(NODE_HT(node), 0x40+(row<<2), value);
-}
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
-static u8 link_to_register(int ldt)
-{
-	/*
-	 * [ 0: 3] Request Route
-	 *     [0] Route to this node
-	 *     [1] Route to Link 0
-	 *     [2] Route to Link 1
-	 *     [3] Route to Link 2
-	 */
-
-	if (ldt&0x08) return 0x40;
-	if (ldt&0x04) return 0x20;
-	if (ldt&0x02) return 0x00;
-	
-	/* we should never get here */
-	print_spew("Unknown Link\n");
-	return 0;
-}
-
-static u32 get_row(u8 node, u8 row)
-{
-	return pci_read_config32(NODE_HT(node), 0x40+(row<<2));
-}
-
-static int link_connection(u8 src, u8 dest)
-{
-	return get_row(src, dest) & 0x0f;
-}
-
-static void rename_temp_node(u8 node)
-{
-	uint32_t val;
-
-	print_spew("Renaming current temporary node to ");
-	print_spew_hex8(node);
-
-	val=pci_read_config32(NODE_HT(7), 0x60);
-	val &= (~7);  /* clear low bits. */
-        val |= node;   /* new node        */
-	pci_write_config32(NODE_HT(7), 0x60, val);
-
-	print_spew(" done.\r\n");
-}
-
-static int verify_connection(u8 dest)
-{
-	/* See if we have a valid connection to dest */
-	u32 val;
-	
-	/* Verify that the coherent hypertransport link is
-	 * established and actually working by reading the
-	 * remode node's vendor/device id
-	 */
-        val = pci_read_config32(NODE_HT(dest),0);
-	if(val != 0x11001022)
-		return 0;
-
-	return 1;
-}
-
-static uint16_t read_freq_cap(device_t dev, uint8_t pos)
-{
-	/* Handle bugs in valid hypertransport frequency reporting */
-	uint16_t freq_cap;
-	uint32_t id;
-
-	freq_cap = pci_read_config16(dev, pos);
-	freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */
-
-#if K8_HT_FREQ_1G_SUPPORT == 1
-    #if K8_REV_F_SUPPORT == 0
-	if (!is_cpu_pre_e0())
-    #endif 
-	{
-		return freq_cap;
-	}
-#endif
-
-	id = pci_read_config32(dev, 0);
-
-	/* AMD K8 Unsupported 1Ghz? */
-	if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) {
-		freq_cap &= ~(1 << HT_FREQ_1000Mhz);
-	}
-	
-	return freq_cap;
-}
-
-static int optimize_connection(device_t node1, uint8_t link1, device_t node2, uint8_t link2)
-{
-	static const uint8_t link_width_to_pow2[]= { 3, 4, 0, 5, 1, 2, 0, 0 };
-	static const uint8_t pow2_to_link_width[] = { 0x7, 4, 5, 0, 1, 3 };
-	uint16_t freq_cap1, freq_cap2;
-	uint8_t width_cap1, width_cap2, width, old_width, ln_width1, ln_width2;
-	uint8_t freq, old_freq;
-	int needs_reset;
-	/* Set link width and frequency */
-
-	/* Initially assume everything is already optimized and I don't need a reset */
-	needs_reset = 0;
-
-	/* Get the frequency capabilities */
-	freq_cap1 = read_freq_cap(node1, link1 + PCI_HT_CAP_HOST_FREQ_CAP);
-	freq_cap2 = read_freq_cap(node2, link2 + PCI_HT_CAP_HOST_FREQ_CAP);
-
-	/* Calculate the highest possible frequency */
-	freq = log2(freq_cap1 & freq_cap2);
-
-	/* See if I am changing the link freqency */
-	old_freq = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_FREQ);
-	old_freq &= 0x0f;
-	needs_reset |= old_freq != freq;
-	old_freq = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_FREQ);
-	old_freq &= 0x0f;
-	needs_reset |= old_freq != freq;
-
-	/* Set the Calulcated link frequency */
-	pci_write_config8(node1, link1 + PCI_HT_CAP_HOST_FREQ, freq);
-	pci_write_config8(node2, link2 + PCI_HT_CAP_HOST_FREQ, freq);
-
-	/* Get the width capabilities */
-	width_cap1 = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH);
-	width_cap2 = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH);
-
-	/* Calculate node1's input width */
-	ln_width1 = link_width_to_pow2[width_cap1 & 7];
-	ln_width2 = link_width_to_pow2[(width_cap2 >> 4) & 7];
-	if (ln_width1 > ln_width2) {
-		ln_width1 = ln_width2;
-	}
-	width = pow2_to_link_width[ln_width1];
-	/* Calculate node1's output width */
-	ln_width1 = link_width_to_pow2[(width_cap1 >> 4) & 7];
-	ln_width2 = link_width_to_pow2[width_cap2 & 7];
-	if (ln_width1 > ln_width2) {
-		ln_width1 = ln_width2;
-	}
-	width |= pow2_to_link_width[ln_width1] << 4;
-	
-	/* See if I am changing node1's width */
-	old_width = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1);
-	old_width &= 0x77;	
-	needs_reset |= old_width != width;
-
-	/* Set node1's widths */
-	pci_write_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1, width);
-
-	// * Calculate node2's width */
-	width = ((width & 0x70) >> 4) | ((width & 0x7) << 4);
-
-	/* See if I am changing node2's width */
-	old_width = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH + 1);
-	old_width &= 0x77;
-	needs_reset |= old_width != width;
-
-	/* Set node2's widths */
-	pci_write_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH + 1, width);
-
-	return needs_reset;
-}
-
-static uint8_t get_linkn_first(uint8_t byte)
-{
-        if(byte & 0x02) { byte = 0; }
-        else if(byte & 0x04) { byte = 1; }
-        else if(byte & 0x08) { byte = 2; }
-        return byte;
-}
-
-static uint8_t get_linkn_last(uint8_t byte)
-{
-        if(byte & 0x02) { byte &= 0x0f; byte |= 0x00;  }
-        if(byte & 0x04) { byte &= 0x0f; byte |= 0x10;  }
-        if(byte & 0x08) { byte &= 0x0f; byte |= 0x20;  }
-        return byte>>4;
-}
-
-static uint8_t get_linkn_last_count(uint8_t byte)
-{
-        byte &= 0x0f;
-        if(byte & 0x02) { byte &= 0xcf; byte |= 0x00; byte+=0x40; }
-        if(byte & 0x04) { byte &= 0xcf; byte |= 0x10; byte+=0x40; }
-        if(byte & 0x08) { byte &= 0xcf; byte |= 0x20; byte+=0x40; }
-        return byte>>4;
-}
-
-static void setup_row_local(u8 source, u8 row) /* source will be 7 when it is for temp use*/
-{
-	uint8_t linkn;
-	uint32_t val;
-	val = 1;
-	for(linkn = 0; linkn<3; linkn++) { 
-		uint8_t regpos; 
-		uint32_t reg;
-		regpos = 0x98 + 0x20 * linkn;
-		reg = pci_read_config32(NODE_HT(source), regpos);
-		if ((reg & 0x17) != 3) continue; /* it is not conherent or not connected*/
-		val |= 1<<(linkn+1); 
-	}
-	val <<= 16;
-	val |= 0x0101;
-	fill_row(source,row, val);
-}
-
-static void setup_row_direct_x(u8 temp, u8 source, u8 dest, u8 linkn)
-{
-	uint32_t val;
-	uint32_t val_s;
-	val = 1<<(linkn+1);
-	val |= 1<<(linkn+1+8); /*for direct connect response route should equal to request table*/
-
-	if(((source &1)!=(dest &1)) 
-#if CROSS_BAR_47_56
-		&& ( (source<4)||(source>5) ) //(6,7) (7,6) should still be here
-					       //(6,5) (7,4) should be here	
-#endif
-	){
-		val |= (1<<16);
-	} else {
-		/*for CROSS_BAR_47_56  47, 56, should be here too
-			and for 47, 56, 57, 75, 46, 64 we need to substract another link to 
-				6,  7,  6,  6,  7,  7 
-		*/
-		val_s = get_row(temp, source);
-		val |= ((val_s>>16) - (1<<(linkn+1)))<<16;
-	}
-
-	fill_row(temp,dest, val );
-}
-
-#if CROSS_BAR_47_56
-static void opt_broadcast_rt(u8 source, u8 dest, u8 kickout) {
-	uint32_t val;
-	val = get_row(source, dest);
-	val -= link_connection(source, kickout)<<16;
-	fill_row(source, dest, val);
-}
-
-static void opt_broadcast_rt_group(const u8 *conn, int num) {
-        int i;
-
-        for(i=0; i<num; i+=3) {
-                opt_broadcast_rt(conn[i], conn[i+1],conn[i+2]);
-        }
-}
-static void opt_broadcast_rt_plus(u8 source, u8 dest, u8 kickout) {
-        uint32_t val;
-        val = get_row(source, dest);
-        val += link_connection(source, kickout)<<16;
-        fill_row(source, dest, val);
-}       
-        
-static void opt_broadcast_rt_plus_group(const u8 *conn, int num) {
-        int i;  
-                
-        for(i=0; i<num; i+=3) {
-                opt_broadcast_rt_plus(conn[i], conn[i+1],conn[i+2]);
-        }       
-} 
-#endif
-
-static void setup_row_direct(u8 source, u8 dest, u8 linkn){
-	setup_row_direct_x(source, source, dest, linkn);
-}
-
-static void setup_remote_row_direct(u8 source, u8 dest, u8 linkn){
-	setup_row_direct_x(7, source, dest, linkn);
-}
-
-static void setup_temp_row(u8 source, u8 dest)
-{
-	/* copy val from (source, dest) to (source,7) */
-	fill_row(source,7,get_row(source,dest));
-}
-
-static void clear_temp_row(u8 source)
-{
-	fill_row(source, 7, DEFAULT);
-}
-
-static void setup_remote_node(u8 node)
-{
-	static const uint8_t pci_reg[] = { 
-		0x44, 0x4c, 0x54, 0x5c, 0x64, 0x6c, 0x74, 0x7c, 
-		0x40, 0x48, 0x50, 0x58, 0x60, 0x68, 0x70, 0x78,
-		0x84, 0x8c, 0x94, 0x9c, 0xa4, 0xac, 0xb4, 0xbc,
-		0x80, 0x88, 0x90, 0x98, 0xa0, 0xa8, 0xb0, 0xb8,
-		0xc4, 0xcc, 0xd4, 0xdc,
-		0xc0, 0xc8, 0xd0, 0xd8,
-		0xe0, 0xe4, 0xe8, 0xec,
-	};
-	int i;
-
-	print_spew("setup_remote_node: ");
-
-	/* copy the default resource map from node 0 */
-	for(i = 0; i < sizeof(pci_reg)/sizeof(pci_reg[0]); i++) {
-		uint32_t value;
-		uint8_t reg;
-		reg = pci_reg[i];
-		value = pci_read_config32(NODE_MP(0), reg);
-		pci_write_config32(NODE_MP(7), reg, value);
-
-	}
-	print_spew("done\r\n");
-}
-
-#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1*/
-
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
-#if !CROSS_BAR_47_56
-static void setup_row_indirect_x(u8 temp, u8 source, u8 dest)
-#else
-static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway, u8 diff)
-#endif
-{
-	/*for indirect connection, we need to compute the val from val_s(source, source), and val_g(source, gateway) */
-	uint32_t val_s;
-	uint32_t val;
-#if !CROSS_BAR_47_56	
-	u8 gateway;
-	u8 diff;
-	if(source<dest) {
-		gateway = source + 2;
-	} else {
-		gateway = source - 2;
-	}
-#endif
-	val_s = get_row(temp, source);
-	val = get_row(temp, gateway);
-	
-	val &= 0xffff;
-	val_s >>= 16;
-	val_s &= 0xfe;
-	
-#if !CROSS_BAR_47_56
-	diff = ((source&1)!=(dest &1));
-#endif
-
-	if(diff && (val_s!=(val&0xff)) ) { /* use another connect as response*/
-		val_s -= val &  0xff;
-#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
-		uint8_t byte;
-		/* Some node have two links left
-		 * don't worry we only have (2, (3 as source need to handle
-		 */
-		byte = val_s;
-		byte = get_linkn_last_count(byte);
-		if((byte>>2)>1) { /* make sure not the corner*/
-			if(source<dest) {
-				val_s-=link_connection(temp, source-2); /* -down*/
-			} else {
-#if CROSS_BAR_47_56		
-				#if 0		
-				if(source==7) {
-					val_s-=link_connection(temp, 6);  // for 7,2 via 5
-				} else if (source==6){
-					val_s-=link_connection(temp, 7);  // for 6,3 via 4
-				} else 
-				#endif
-				if (source < gateway) { // for 5, 4 via 7
-				  	val_s-=link_connection(temp, source-2);
-				} else
-#endif					
-					val_s-=link_connection(temp, source+2); /* -up*/
-			}
-		}
-#endif
-		val &= 0xff;
-		val |= (val_s<<8);
-	} 
-
-	if(diff) { /* cross rung?*/
-		val |= (1<<16);
-	}
-	else {
-		val_s = get_row(temp, source);
-		val |= ((val_s>>16) - link_connection(temp, gateway))<<16; 
-	}
-
-	fill_row(temp, dest, val);
-
-}
-
-#if !CROSS_BAR_47_56
-static void setup_row_indirect(u8 source, u8 dest)
-{	
-	setup_row_indirect_x(source, source, dest);
-}
-#else           
-static void setup_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff)
-{
-	setup_row_indirect_x(source, source, dest, gateway, diff);
-}
-#endif   
-
-static void setup_row_indirect_group(const u8 *conn, int num)
-{
-	int i;
-
-#if !CROSS_BAR_47_56
-	for(i=0; i<num; i+=2) {
-		setup_row_indirect(conn[i], conn[i+1]);
-#else
-	for(i=0; i<num; i+=4) {
-		setup_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]);
-#endif
-
-	}
-}
-
-#if !CROSS_BAR_47_56
-static void setup_remote_row_indirect(u8 source, u8 dest)
-{
-	setup_row_indirect_x(7, source, dest);
-}
-#else
-static void setup_remote_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff)
-{
-	setup_row_indirect_x(7, source, dest, gateway, diff);
-}
-#endif
-
-static void setup_remote_row_indirect_group(const u8 *conn, int num)
-{
-	int i;
-
-#if !CROSS_BAR_47_56
-	for(i=0; i<num; i+=2) {
-		setup_remote_row_indirect(conn[i], conn[i+1]);
-#else
-	for(i=0; i<num; i+=4) {
-		setup_remote_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]);
-#endif
-	}
-}
-
-#endif /*CONFIG_MAX_PHYSICAL_CPUS > 2*/
-
-
-static void setup_uniprocessor(void)
-{
-	print_spew("Enabling UP settings\r\n");
-#if CONFIG_LOGICAL_CPUS==1
-	unsigned tmp = (pci_read_config32(NODE_MC(0), 0xe8) >> 12) & 3;
-	if (tmp>0) return;
-#endif
-	disable_probes();
-}
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
-static int optimize_connection_group(const u8 *opt_conn, int num) {
-	int needs_reset = 0;
-	int i;
-	for(i=0; i<num; i+=2) {
-		needs_reset = optimize_connection(
-			NODE_HT(opt_conn[i]), 0x80 + link_to_register(link_connection(opt_conn[i],opt_conn[i+1])),
-			NODE_HT(opt_conn[i+1]), 0x80 + link_to_register(link_connection(opt_conn[i+1],opt_conn[i])) );
-	}               
-	return needs_reset;
-}  
-#endif
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
-static unsigned setup_smp2(void)
-{
-	unsigned nodes;
-	u8 byte;
-	uint32_t val;
-	nodes = 2;
-
-	setup_row_local(0, 0); /* it will update the broadcast RT*/
-	
-	val = get_row(0,0);
-	byte = (val>>16) & 0xfe;
-	if(byte<0x2) { /* no coherent connection so get out.*/
-		nodes = 1;
-		return nodes;
-	}
-
-	/* Setup and check a temporary connection to node 1 */
-#if TRY_HIGH_FIRST == 1
-	byte = get_linkn_last(byte); /* Max Link to node1 */
-#else
-	byte = get_linkn_first(byte); /*Min Link to node1 --- according to AMD*/
-#endif
-	print_linkn("(0,1) link=", byte);
-	setup_row_direct(0,1, byte);
-	setup_temp_row(0, 1);
-	
-	verify_connection(7);
-
-	/* We found 2 nodes so far */
-	val = pci_read_config32(NODE_HT(7), 0x6c);
-	byte = (val>>2) & 0x3; /*get default link on node7 to node0*/
-	print_linkn("(1,0) link=", byte);
-	setup_row_local(7,1);
-	setup_remote_row_direct(1, 0, byte);
-
-#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)	
-	val = get_row(7,1);
-	byte = (val>>16) & 0xfe;
-	byte = get_linkn_last_count(byte);
-	if((byte>>2)==3) { /* Oh! we need to treat it as node2. So use another link*/
-		val = get_row(0,0);
-		byte = (val>>16) & 0xfe;
-#if TRY_HIGH_FIRST == 1
-		byte = get_linkn_first(byte); /* Min link to Node1 */
-#else
-		byte = get_linkn_last(byte);  /* Max link to Node1*/
-#endif
-		print_linkn("\t-->(0,1) link=", byte);
-		setup_row_direct(0,1, byte);
-		setup_temp_row(0, 1);
-	
-		verify_connection(7);
-			
-		/* We found 2 nodes so far */
-		val = pci_read_config32(NODE_HT(7), 0x6c);
-		byte = (val>>2) & 0x3; /* get default link on node7 to node0*/
-		print_linkn("\t-->(1,0) link=", byte); 
-		setup_row_local(7,1);
-		setup_remote_row_direct(1, 0, byte);
-	}
-#endif
-	
-	setup_remote_node(1);  /* Setup the regs on the remote node */
-	rename_temp_node(1);    /* Rename Node 7 to Node 1  */
-	enable_routing(1);      /* Enable routing on Node 1 */
-#if 0
-	/*don't need and it is done by clear_dead_links */
-	clear_temp_row(0);
-#endif
-
-	return nodes;
-}
-#endif /*CONFIG_MAX_PHYSICAL_CPUS > 1 */
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
-
-static unsigned setup_smp4(void)
-{
-	unsigned nodes;
-	u8 byte;
-	uint32_t val;
-
-	nodes=4;
-
-	/* Setup and check temporary connection from Node 0 to Node 2 */
-	val = get_row(0,0);
-	byte = ((val>>16) & 0xfe) - link_connection(0,1);
-	byte = get_linkn_last_count(byte);
-
-	if((byte>>2)==0) { /* We should have two coherent for 4p and above*/
-		nodes = 2;
-		return nodes;
-	}
-
-	byte &= 3; /* bit [3,2] is count-1*/
-	print_linkn("(0,2) link=", byte); 
-	setup_row_direct(0, 2, byte);  /*(0,2) direct link done*/
-
-	/* We found 3 nodes so far. Now setup a temporary
-	* connection from node 0 to node 3 via node 1
-	*/
-	setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
-	/* here should setup_row_direct(1,3) at first, before that we should find the link in node 1 to 3*/
-	val = get_row(1,1);
-	byte = ((val>>16) & 0xfe) - link_connection(1,0);
-	byte = get_linkn_first(byte);
-	print_linkn("(1,3) link=", byte); 
-	setup_row_direct(1,3,byte);  /* (1, 3) direct link done*/
-
-	/* We found 4 nodes so far. Now setup all nodes for 4p */
-	// We need to make sure 0,2 and 1,3 link is set already
-#if !CROSS_BAR_47_56
-	static const u8 conn4_1[] = {
-		0,3,
-		1,2,
-	};	
-#else
-	static const u8 conn4_1[] = {
-		0,3,2,1,
-		1,2,3,1,
-	};
-#endif
-
-	setup_row_indirect_group(conn4_1, sizeof(conn4_1)/sizeof(conn4_1[0]));
-
-	setup_temp_row(0,2);
-	verify_connection(7);
-	val = pci_read_config32(NODE_HT(7), 0x6c);
-	byte = (val>>2) & 0x3; /* get default link on 7 to 0*/
-	print_linkn("(2,0) link=", byte); 
-
-	setup_row_local(7,2);
-	setup_remote_row_direct(2, 0, byte);  /* node 2 to node 0 direct link done */
-	setup_remote_node(2);  /* Setup the regs on the remote node */
-
-	rename_temp_node(2);    /* Rename Node 7 to Node 2  */
-	enable_routing(2);      /* Enable routing on Node 2 */
-
-	setup_temp_row(0,1);
-	setup_temp_row(1,3);
-	verify_connection(7);
-
-	val = pci_read_config32(NODE_HT(7), 0x6c);
-	byte = (val>>2) & 0x3; /* get default link on 7 to 1*/
-	print_linkn("(3,1) link=", byte); 
-
-	setup_row_local(7,3);
-	setup_remote_row_direct(3, 1, byte); /* node 3 to node 1 direct link done */
-	setup_remote_node(3);  /* Setup the regs on the remote node */
-
-	/* We need to init link between 2, and 3 direct link */
-	val = get_row(2,2);
-	byte = ((val>>16) & 0xfe) - link_connection(2,0);
-	byte = get_linkn_last_count(byte);
-	print_linkn("(2,3) link=", byte & 3);
-	
-	setup_row_direct(2,3, byte & 0x3);
-	setup_temp_row(0,2);
-	setup_temp_row(2,3);
-	verify_connection(7); /* to 3*/
-
-#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
-	/* We need to find out which link is to node3 */
-	if((byte>>2)==2) { /* one to node3, one to node0, one to node4*/
-		val = get_row(7,3);
-		if((val>>16) == 1) { /* that link is to node4, because via node1 it has been set, recompute it*/
-			val = get_row(2,2);
-			byte = ((val>>16) & 0xfe) - link_connection(2,0);
-			byte = get_linkn_first(byte);
-			print_linkn("\t-->(2,3) link=", byte); 
-			setup_row_direct(2,3,byte);
-			setup_temp_row(2,3);
-			verify_connection(7); /* to 3*/
-		}
-	} 
-#endif
-
-	val = pci_read_config32(NODE_HT(7), 0x6c);
-	byte = (val>>2) & 0x3; /* get default link on 7 to 2*/
-	print_linkn("(3,2) link=", byte); 
-	setup_remote_row_direct(3,2, byte);
-
-#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1)
-	/* set link from 3 to 5 before enable it*/
-        val = get_row(7,3);
-        byte = ((val>>16) & 0xfe) - link_connection(7,2) - link_connection(7,1);
-        byte = get_linkn_last_count(byte);
-        if((byte>>2)==1) { /* We should have three coherent links on node 3 for 6p and above*/
-        	byte &= 3; /*bit [3,2] is count-2*/
-	        print_linkn("(3,5) link=", byte);
-	        setup_remote_row_direct(3, 5, byte);
-	}
-	
-        val = get_row(2,2);
-        byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0);
-        byte = get_linkn_last_count(byte);
-
-        if((byte>>2)==1) { /* We should have three coherent link on node 2 for 6p and above*/
-	        byte &= 3; /* bit [3,2] is count-2*/
-	        print_linkn("(2,4) link=", byte);
-	        setup_row_direct(2, 4, byte);
-	}	
-#endif
-
-	//Beside 3, 1 is set, We need to make sure 3, 5 is set already in case has three link in 3
-#if !CROSS_BAR_47_56
-        static const u8 conn4_3[] = {
-                3,0,
-        };
-#else
-        static const u8 conn4_3[] = {
-                3,0,1,1,
-        };
-#endif
-        setup_remote_row_indirect_group(conn4_3, sizeof(conn4_3)/sizeof(conn4_3[0]));
-
-/* ready to enable RT for Node 3 */
-	rename_temp_node(3);
-	enable_routing(3);      /* enable routing on node 3 (temp.) */
-
-	// beside 2, 0 is set, We need to make sure 2, 4 link is set already in case has three link in 2
-#if !CROSS_BAR_47_56    
-        static const u8 conn4_2[] = {
-                2,1,  
-        };      
-#else   
-        static const u8 conn4_2[] = {
-                2,1,0,1,
-        };      
-#endif          
-        setup_row_indirect_group(conn4_2, sizeof(conn4_2)/sizeof(conn4_2[0]));
-
-#if 0
-	/*We need to do sth to reverse work for setup_temp_row (0,1) (1,3) */
-	/* it will be done by clear_dead_links */
-	clear_temp_row(0);
-	clear_temp_row(1);
-#endif
-
-	return nodes;
-
-}
-
-#endif /* CONFIG_MAX_PHYSICAL_CPUS > 2 */
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 4
-
-static unsigned setup_smp6(void)
-{
-	unsigned nodes;
-	u8 byte;
-	uint32_t val;
-
-	nodes=6;
-
-	/* Setup and check temporary connection from Node 0 to Node 4  through 2*/
-        val = get_row(2,2);
-        byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0);
-        byte = get_linkn_last_count(byte);
-
-        if((byte>>2)==0) { /* We should have three coherent link on node 2 for 6p and above*/
-                nodes = 4;
-                return nodes;
-        }
-
-	/* Setup and check temporary connection from Node 0 to Node 5  through 1, 3*/
-        /* set link from 3 to 5 before enable it*/
-        val = get_row(3,3);
-        byte = ((val>>16) & 0xfe) - link_connection(3,2) - link_connection(3,1);
-        byte = get_linkn_last_count(byte);
-        if((byte>>2)==0) { /* We should have three coherent links on node 3 for 6p and above*/
-                nodes = 4;
-                return nodes;
-        }
-	
-	/* We found 6 nodes so far. Now setup all nodes for 6p */
-#warning "FIXME we need to find out the correct gateway for 6p"	
-	static const u8 conn6_1[] = {
-#if !CROSS_BAR_47_56
-		0, 4,
-		0, 5,
-		1, 4,
-		1, 5,
-		2, 5,
-		3, 4,
-#else
-		0, 4, 2, 0,
-		0, 5, 2, 1,
-		1, 4, 3, 1,
-		1, 5, 3, 0,
-		2, 5, 3, 0,
-		3, 4, 2, 0,
-#endif
-	}; 
-
-	setup_row_indirect_group(conn6_1, sizeof(conn6_1)/sizeof(conn6_1[0]));
-	
-	for(byte=0; byte<4; byte+=2) {
-		setup_temp_row(byte,byte+2);
-	}
-	verify_connection(7);
-	val = pci_read_config32(NODE_HT(7), 0x6c);
-	byte = (val>>2) & 0x3; /*get default link on 7 to 2*/
-	print_linkn("(4,2) link=", byte); 
-	
-	setup_row_local(7,4);
-	setup_remote_row_direct(4, 2, byte);
-	setup_remote_node(4);  /* Setup the regs on the remote node */
-	
-	/* Set indirect connection to 0, to 3 */
-	//we only need to set 4,0 here
-	static const u8 conn6_2[] = {
-#if !CROSS_BAR_47_56
-		4, 0,
-#else
-		4, 0, 2, 0,
-#endif
-	};      
-	
-	setup_remote_row_indirect_group(conn6_2, sizeof(conn6_2)/sizeof(conn6_2[0]));
-	
-	rename_temp_node(4);
-	enable_routing(4);
-
-	setup_temp_row(0,1);
-	for(byte=0; byte<4; byte+=2) {
-		setup_temp_row(byte+1,byte+3);
-	}
-	verify_connection(7);
-
-	val = pci_read_config32(NODE_HT(7), 0x6c);
-	byte = (val>>2) & 0x3; /* get default link on 7 to 3*/
-	print_linkn("(5,3) link=", byte); 
-	setup_row_local(7,5);
-	setup_remote_row_direct(5, 3, byte);
-	setup_remote_node(5);  /* Setup the regs on the remote node */
-	
-#if !CROSS_BAR_47_56
-	/* We need to init link between 4, and 5 direct link */
-	val = get_row(4,4);
-	byte = ((val>>16) & 0xfe) - link_connection(4,2);
-	byte = get_linkn_last_count(byte);
-	print_linkn("(4,5) link=", byte & 3);
-	
-	setup_row_direct(4,5, byte & 0x3);
-	setup_temp_row(0,2);
-	setup_temp_row(2,4);
-	setup_temp_row(4,5);
-	verify_connection(7); /* to 5*/
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 6
-	/* We need to find out which link is to node5 */
-	
-	if((byte>>2)==2) { /* one to node5, one to node2, one to node6*/
-		val = get_row(7,5);
-		if((val>>16) == 1) { /* that link is to node6, because via node 3 node 5 has been set*/
-			val = get_row(4,4);
-			byte = ((val>>16) & 0xfe) - link_connection(4,2);
-			byte = get_linkn_first(byte);
-			print_linkn("\t-->(4,5) link=", byte);
-			setup_row_direct(4,5,byte);
-			setup_temp_row(4,5);
-			verify_connection(7); /* to 5*/
-		}
-	} 
-#endif
-
-	val = pci_read_config32(NODE_HT(7), 0x6c);
-	byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
-	print_linkn("(5,4) link=", byte); 
-	setup_remote_row_direct(5,4, byte);
-	
-	//init 5, 7 here
-        val = get_row(7,5);
-        byte = ((val>>16) & 0xfe) - link_connection(7,4) - link_connection(7,3);
-        byte = get_linkn_last_count(byte);
-        if((byte>>2)==1) { /* We should have three coherent links on node 5 for 6p and above*/
-        	byte &= 3; /*bit [3,2] is count-2*/
-	        print_linkn("(5,7) link=", byte);
-	        setup_remote_row_direct(5, 7, byte);
-	}
-	
-	//init 4,6 here
-        val = get_row(4,4);
-        byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
-        byte = get_linkn_last_count(byte);
-
-        if((byte>>2)==1) { /* We should have three coherent link on node 4 for 6p and above*/
-	        byte &= 3; /* bit [3,2] is count-2*/
-	        print_linkn("(4,6) link=", byte);
-	        setup_row_direct(4, 6, byte);
-	}	
-	
-#endif	
-	
-	//We need to set 5,0 here only, We need to set up 5, 7 to make 5,0
-	/* Set indirect connection to 0, to 3  for indirect we will use clockwise routing */
-	static const u8 conn6_3[] = {
-#if !CROSS_BAR_47_56
-		5, 0,
-#else
-		5, 0, 3, 0,
-#endif
-	};      
-	
-	setup_remote_row_indirect_group(conn6_3, sizeof(conn6_3)/sizeof(conn6_3[0]));
-
-/* ready to enable RT for 5 */
-	rename_temp_node(5);
-	enable_routing(5);      /* enable routing on node 5 (temp.) */
-
-	static const u8 conn6_4[] = {
-#if !CROSS_BAR_47_56
-		4, 1,
-		4, 3,
-		
-		5, 2,
-		5, 1,
-		
-#else
-		4, 1, 2, 0,
-		4, 3, 2, 0,
-		4, 5, 2, 0,
-		
-		5, 2, 3, 0,
-		5, 1, 3, 0,
-		5, 4, 3, 0,
-		
-#endif
-	};      
-	
-	setup_row_indirect_group(conn6_4, sizeof(conn6_4)/sizeof(conn6_4[0]));
-
-#if 0
-	/* We need to do sth about reverse about setup_temp_row (0,1), (2,4), (1, 3), (3,5)
-	 * It will be done by clear_dead_links 
-	 */
-	for(byte=0; byte<4; byte++) {
-		clear_temp_row(byte);
-	}
-#endif
-
-	return nodes;
-
-}
-
-#endif /* CONFIG_MAX_PHYSICAL_CPUS > 4 */
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 6
-
-static unsigned setup_smp8(void)
-{
-	unsigned nodes;
-	u8 byte;
-	uint32_t val;
-
-	nodes=8;
-
-	/* Setup and check temporary connection from Node 0 to Node 6 via 2 and 4 to 7 */
-	val = get_row(4,4);
-#if CROSS_BAR_47_56 
-	byte = ((val>>16) & 0xfe) - link_connection(4,2);
-#else
-	byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2);
-        byte = get_linkn_last_count(byte); /* Max link to 6*/
-        if((byte>>2)==0) { /* We should have two or three coherent links on node 4 for 8p*/
-                nodes = 6;
-                return nodes;
-        }
-#endif
-
-#if CROSS_BAR_47_56 
-	byte = get_linkn_last_count(byte); /* Max link to 6*/
-	if((byte>>2)<2) { /* We should have two or three coherent links on node 4 for 8p*/
-		nodes = 6;
-		return nodes;
-	}
-#if TRY_HIGH_FIRST == 1
-	byte = ((val>>16) & 0xfe) - link_connection(4,2);
-	byte = get_linkn_first(byte);  /*Min link to 6*/
-#else
-	byte &= 3; /* bit [3,2] is count-1 or 2*/
-#endif
-	print_linkn("(4,6) link=", byte);
-	setup_row_direct(4, 6, byte);
-#endif
-
-#if !CROSS_BAR_47_56
-	/* Setup and check temporary connection from Node 0 to Node 7  through 1, 3, 5*/
-        val = get_row(5,5);
-        byte = ((val>>16) & 0xfe) - link_connection(5,4) - link_connection(5,3);
-        byte = get_linkn_last_count(byte);
-        if((byte>>2)==0) { /* We should have three coherent links on node 5 for 6p and above*/
-                nodes = 6;
-                return nodes;
-        }
-#endif
-
-	/* We found 8 nodes so far. Now setup all nodes for 8p */
-	static const u8 conn8_1[] = {
-#if !CROSS_BAR_47_56
-		0, 6,
-		/*0, 7,*/
-		1, 6,
-		/*1, 7,*/
-		2, 6,
-		/*2, 7,*/
-		3, 6,
-		/*3, 7,*/
-		/*4, 7,*/
-		5, 6,
-#else
-		0, 6, 2, 0,
-		/*0, 7, 2, 0,*/
-		1, 6, 3, 0,
-		/*1, 7, 3, 0,*/
-		2, 6, 4, 0,
-		/*2, 7, 4, 0,*/
-		3, 6, 5, 1,
-		/*3, 7, 5, 0,*/
-#endif
-	};
-
-	setup_row_indirect_group(conn8_1,sizeof(conn8_1)/sizeof(conn8_1[0]));
-
-	for(byte=0; byte<6; byte+=2) {
-		setup_temp_row(byte,byte+2);
-	}
-	verify_connection(7);
-	val = pci_read_config32(NODE_HT(7), 0x6c);
-	byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
-	print_linkn("(6,4) link=", byte);
-	
-	setup_row_local(7,6);
-	setup_remote_row_direct(6, 4, byte);
-	setup_remote_node(6);  /* Setup the regs on the remote node */
-	/* Set indirect connection to 0, to 3   */
-#warning "FIXME we need to find out the correct gateway for 8p"		
-	static const u8 conn8_2[] = {
-#if !CROSS_BAR_47_56
-		6, 0,
-#else
-		6, 0, 4, 0,
-#endif
-	};
-
-	setup_remote_row_indirect_group(conn8_2, sizeof(conn8_2)/sizeof(conn8_2[0]));
-
-#if CROSS_BAR_47_56
-	//init 5, 6 here
-        /* here init 5, 6 */
-        /* Setup and check temporary connection from Node 0 to Node 5  through 1, 3, 5*/
-        val = get_row(5,5);
-        byte = ((val>>16) & 0xfe) - link_connection(5,3);
-#if TRY_HIGH_FIRST == 1
-	byte = get_linkn_first(byte);
-#else
-        byte = get_linkn_last(byte);        
-#endif
-        print_linkn("(5,6) link=", byte);
-        setup_row_direct(5, 6, byte);
-
-        setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
-        for(byte=0; byte<4; byte+=2) {
-                setup_temp_row(byte+1,byte+3);
-        }
-	setup_temp_row(5,6);
-
-        verify_connection(7);
-
-	val = get_row(7,6); // to chect it if it is node6 before renaming
-	if( (val>>16) == 1) { // it is real node 7 so swap it
-                /* We need to recompute link to 6 */
-       	        val = get_row(5,5);
-               	byte = ((val>>16) & 0xfe) - link_connection(5,3);
-#if TRY_HIGH_FIRST == 1
-                byte = get_linkn_first(byte);
-#else
-       	        byte = get_linkn_last(byte);
-#endif
-               	print_linkn("\t-->(5,6) link=", byte);
-                setup_row_direct(5, 6, byte);
-#if 0
-               	setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
-                for(byte=0; byte<4; byte+=2) {
-       	                setup_temp_row(byte+1,byte+3); 
-               	}
-#endif
-		setup_temp_row(5,6);
-
-       	        verify_connection(7);
-	}
-        val = pci_read_config32(NODE_HT(7), 0x6c);
-        byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
-        print_linkn("(6,5) link=", byte);
-        setup_remote_row_direct(6, 5, byte);
-        /*Till now 56, 65 done */
-#endif
-	
-	rename_temp_node(6);
-	enable_routing(6);
-
-#if !CROSS_BAR_47_56
-	setup_temp_row(0,1);
-	for(byte=0; byte<6; byte+=2) {
-		setup_temp_row(byte+1,byte+3);
-	}
-
-	verify_connection(7);
-
-	val = pci_read_config32(NODE_HT(7), 0x6c);
-	byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
-	print_linkn("(7,5) link=", byte); 
-	setup_row_local(7,7);
-	setup_remote_row_direct(7, 5, byte);
-
-#else
-        val = get_row(4,4);
-        byte = ((val>>16) & 0xfe) - link_connection(4,2) - link_connection(4,6);
-        byte = get_linkn_first(byte); 
-        print_linkn("(4,7) link=", byte); 
-        setup_row_direct(4, 7, byte);
-
-        /* Setup and check temporary connection from Node 0 to Node 7 through 2, and 4*/
-	for(byte=0; byte<4; byte+=2) {
-		setup_temp_row(byte,byte+2);
-	}
-
-        verify_connection(7);
-
-	val = pci_read_config32(NODE_HT(7), 0x6c);
-	byte = (val>>2) & 0x3; /* get default link on 7 to 4*/
-	print_linkn("(7,4) link=", byte); 
-	setup_row_local(7,7);
-	setup_remote_row_direct(7, 4, byte);
-	/* till now 4-7, 7-4 done. */
-#endif
-	setup_remote_node(7);  /* Setup the regs on the remote node */
-
-#if CROSS_BAR_47_56
-	/* here init 5, 7 */
-	/* Setup and check temporary connection from Node 0 to Node 5  through 1, 3, 5*/
-	val = get_row(5,5);
-	byte = ((val>>16) & 0xfe) - link_connection(5,3) - link_connection(5,6);
-	byte = get_linkn_first(byte);
-	print_linkn("(5,7) link=", byte); 
-	setup_row_direct(5, 7, byte);
-	
-	setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */
-	for(byte=0; byte<4; byte+=2) {
-		setup_temp_row(byte+1,byte+3); 
-	}
-
-	verify_connection(7);
-
-	val = pci_read_config32(NODE_HT(7), 0x6c);
-	byte = (val>>2) & 0x3; /* get default link on 7 to 5*/
-	print_linkn("(7,5) link=", byte);
-	setup_remote_row_direct(7, 5, byte);
-	/*Till now 57, 75 done */
-	
-#endif
-
-	/* We need to init link between 6, and 7 direct link */
-	val = get_row(6,6);
-#if !CROSS_BAR_47_56
-	byte = ((val>>16) & 0xfe) - link_connection(6,4);
-#else
-	byte = ((val>>16) & 0xfe) - link_connection(6,4) - link_connection(6,5);
-#endif
-	byte = get_linkn_first(byte);
-	print_linkn("(6,7) link=", byte);
-	setup_row_direct(6,7, byte);
-
-	val = get_row(7,7);
-#if !CROSS_BAR_47_56
-	byte = ((val>>16) & 0xfe) - link_connection(7,5);
-#else
-	byte = ((val>>16) & 0xfe) - link_connection(7,5) - link_connection(7,4);
-#endif
-	byte = get_linkn_first(byte);
-	print_linkn("(7,6) link=", byte);
-	setup_row_direct(7,6, byte);
-
-	/* Set indirect connection to 0, to 3  for indirect we will use clockwise routing */
-	static const u8 conn8_3[] = {
-#if !CROSS_BAR_47_56
-		0, 7,  /* restore it*/
-		1, 7,
-		2, 7,
-		3, 7,
-		4, 7,
-		
-		6, 1,
-		6, 2,
-		6, 3,
-		6, 5,
-		
-		7, 0,
-		7, 1,
-		7, 2,
-		7, 3,
-		7, 4,
-#else
-
-		
-                4, 5, 6, 1,
-                5, 4, 7, 1,
-
-                6, 1, 5, 0, // or 4, 1
-                6, 2, 4, 0,
-                6, 3, 5, 0, // or 4, 1
-
-                7, 0, 4, 0, // or 5, 1
-                7, 1, 5, 0,
-                7, 2, 4, 0, // or 5, 1
-                7, 3, 5, 0,
-
-		0, 7, 2, 0, /* restore it*/
-		1, 7, 3, 0,
-		2, 7, 4, 1,
-		3, 7, 5, 0,
-
-                2, 5, 4, 1, /* reset it */
-                3, 4, 5, 1,
-
-		4, 1, 2, 1, /* reset it */
-		4, 3, 2, 1,
-
-		5, 2, 3, 1, /* reset it */
-		5, 0, 3, 1,
-		
-#endif
-	};
-
-	setup_row_indirect_group(conn8_3, sizeof(conn8_3)/sizeof(conn8_3[0]));
-
-#if CROSS_BAR_47_56
-        /* for 47, 56, 57, 75, 46, 64 we need to substract another link to 
-               6,  7,  6,  6,  7,  7 */
-        static const u8 conn8_4[] = {
-//direct
-                4, 7, 6,
-                5, 6, 7, 
-		5, 7, 6, 
-		7, 5, 6,  
-		4, 6, 7, 
-		6, 4, 7, 
-
-//in direct
-		0, 6, 1, 
-		0, 7, 1, 
-		
-		1, 6, 0, 
-		1, 7, 0, 
-
-		2, 6, 3, 
-//		2, 7, 3, +
-		
-//		3, 6, 1, +
-		3, 7, 2,
- 
-		6, 0, 7,
-		6, 1, 7, // needed for via 5
-			6, 1, 4, // ???
-		6, 2, 7,
-		6, 3, 7, // needed for via 5 
-			6, 3, 4, //???
-		7, 0, 6, // needed for via 4
-			7, 0, 5, //???
-		7, 1, 6,
-		7, 2, 6, // needed for via 4
-			7, 2, 5, //???
-		7, 3, 6,
-        };
-
-        opt_broadcast_rt_group(conn8_4, sizeof(conn8_4)/sizeof(conn8_4[0]));
-
-        static const u8 conn8_5[] = {
-                2, 7, 0, 
-
-                3, 6, 1, 
-        };      
-                
-        opt_broadcast_rt_plus_group(conn8_5, sizeof(conn8_5)/sizeof(conn8_5[0]));
-#endif
-
-
-	
-/* ready to enable RT for Node 7 */
-	enable_routing(7);      /* enable routing on node 7 (temp.) */
-
-	return nodes;
-}
-
-#endif /* CONFIG_MAX_PHYSICAL_CPUS > 6 */
-
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
-
-static unsigned setup_smp(void)
-{
-	unsigned nodes;
-
-	print_spew("Enabling SMP settings\r\n");
-		
-	nodes = setup_smp2();
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
-	if(nodes == 2) 
-		nodes = setup_smp4();
-#endif
-	
-#if CONFIG_MAX_PHYSICAL_CPUS > 4
-	if(nodes == 4)
-		nodes = setup_smp6();
-#endif
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 6
-	if(nodes == 6) 
-		nodes = setup_smp8();
-#endif
-
-#if CONFIG_USE_PRINTK_IN_CAR
-	printk_debug("%02x nodes initialized.\r\n", nodes);
-#else
-	print_debug_hex8(nodes);
-	print_debug(" nodes initialized.\r\n");
-#endif
-	
-	return nodes;
-}
-
-static unsigned verify_mp_capabilities(unsigned nodes)
-{
-	unsigned node, mask;
-	
-	mask = 0x06; /* BigMPCap */
-
-	for (node=0; node<nodes; node++) {
-		mask &= pci_read_config32(NODE_MC(node), 0xe8);
-	}
-	
-	switch(mask) {
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
-	case 0x02: /* MPCap    */
-		if(nodes > 2) {
-			print_err("Going back to DP\r\n");
-			return 2;
-		}
-		break;
-#endif
-	case 0x00: /* Non SMP */
-		if(nodes >1 ) {
-			print_err("Going back to UP\r\n");
-			return 1;
-		}
-		break;
-	}
-	
-	return nodes;
-
-}
-
-
-static void clear_dead_routes(unsigned nodes)
-{
-	int last_row;
-	int node, row;
-#if CONFIG_MAX_PHYSICAL_CPUS == 8
-	if(nodes==8) return;/* don't touch (7,7)*/
-#endif
-	last_row = nodes;
-	if (nodes == 1) {
-		last_row = 0;
-	}
-	for(node = 7; node >= 0; node--) {
-		for(row = 7; row >= last_row; row--) {
-			fill_row(node, row, DEFAULT);
-		}
-	}
-	
-	/* Update the local row */
-	for( node=0; node<nodes; node++) {
-		uint32_t val = 0;
-		for(row =0; row<nodes; row++) {
-			val |= get_row(node, row);
-		}
-		fill_row(node, node, (((val & 0xff) | ((val >> 8) & 0xff)) << 16) | 0x0101); 
-	}
-}
-#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */
-
-#if CONFIG_LOGICAL_CPUS==1
-static unsigned verify_dualcore(unsigned nodes)
-{
-	unsigned node, totalcpus, tmp;
-
-	totalcpus = 0;
-	for (node=0; node<nodes; node++) {
-		tmp = (pci_read_config32(NODE_MC(node), 0xe8) >> 12) & 3 ;
-		totalcpus += (tmp + 1);
-	}
-
-	return totalcpus;
-		
-}
-#endif
-
-static void coherent_ht_finalize(unsigned nodes)
-{
-	unsigned node;
-#if K8_REV_F_SUPPORT == 0
-	int rev_a0;
-#endif
-#if CONFIG_LOGICAL_CPUS==1
-	unsigned total_cpus;
-
-	if(read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) == 0) { /* dual_core */
-		total_cpus = verify_dualcore(nodes);
-	}
-	else {
-		total_cpus = nodes;
-	}
-#endif
-	
-	/* set up cpu count and node count and enable Limit
-	 * Config Space Range for all available CPUs.
-	 * Also clear non coherent hypertransport bus range
-	 * registers on Hammer A0 revision.
-	 */
-
-	print_spew("coherent_ht_finalize\r\n");
-#if K8_REV_F_SUPPORT == 0
-	rev_a0 = is_cpu_rev_a0();
-#endif
-	for (node = 0; node < nodes; node++) {
-		device_t dev;
-		uint32_t val;
-		dev = NODE_HT(node);
-
-		/* Set the Total CPU and Node count in the system */
-		val = pci_read_config32(dev, 0x60);
-		val &= (~0x000F0070);
-#if CONFIG_LOGICAL_CPUS==1
-		val |= ((total_cpus-1)<<16)|((nodes-1)<<4);
-#else
-		val |= ((nodes-1)<<16)|((nodes-1)<<4);
-#endif
-		pci_write_config32(dev, 0x60, val);
-
-		/* Only respond to real cpu pci configuration cycles
-		 * and optimize the HT settings 
-		 */
-		val=pci_read_config32(dev, HT_TRANSACTION_CONTROL);
-		val &= ~((HTTC_BUF_REL_PRI_MASK << HTTC_BUF_REL_PRI_SHIFT) |
-			(HTTC_MED_PRI_BYP_CNT_MASK << HTTC_MED_PRI_BYP_CNT_SHIFT) |
-			(HTTC_HI_PRI_BYP_CNT_MASK << HTTC_HI_PRI_BYP_CNT_SHIFT));
-		val |= HTTC_LIMIT_CLDT_CFG | 
-			(HTTC_BUF_REL_PRI_8 << HTTC_BUF_REL_PRI_SHIFT) |
-			(3 << HTTC_MED_PRI_BYP_CNT_SHIFT) |
-			(3 << HTTC_HI_PRI_BYP_CNT_SHIFT);
-		pci_write_config32(dev, HT_TRANSACTION_CONTROL, val);
-
-#if K8_REV_F_SUPPORT == 0
-		if (rev_a0) {
-			pci_write_config32(dev, 0x94, 0);
-			pci_write_config32(dev, 0xb4, 0);
-			pci_write_config32(dev, 0xd4, 0);
-		}
-#endif
-	}
-
-	print_spew("done\r\n");
-}
-
-static int apply_cpu_errata_fixes(unsigned nodes)
-{
-	unsigned node;
-	int needs_reset = 0;
-	for(node = 0; node < nodes; node++) {
-		device_t dev;
-		uint32_t cmd;
-		dev = NODE_MC(node);
-#if K8_REV_F_SUPPORT == 0
-		if (is_cpu_pre_c0()) {
-
-			/* Errata 66
-			 * Limit the number of downstream posted requests to 1 
-			 */
-			cmd = pci_read_config32(dev, 0x70);
-			if ((cmd & (3 << 0)) != 2) {
-				cmd &= ~(3<<0);
-				cmd |= (2<<0);
-				pci_write_config32(dev, 0x70, cmd );
-				needs_reset = 1;
-			}
-			cmd = pci_read_config32(dev, 0x7c);
-			if ((cmd & (3 << 4)) != 0) {
-				cmd &= ~(3<<4);
-				cmd |= (0<<4);
-				pci_write_config32(dev, 0x7c, cmd );
-				needs_reset = 1;
-			}
-			/* Clock Power/Timing Low */
-			cmd = pci_read_config32(dev, 0xd4);
-			if (cmd != 0x000D0001) {
-				cmd = 0x000D0001;
-				pci_write_config32(dev, 0xd4, cmd);
-				needs_reset = 1; /* Needed? */
-			}
-
-		}
-		else if (is_cpu_pre_d0()) { // d0 later don't need it
-			uint32_t cmd_ref;
-			/* Errata 98 
-			 * Set Clk Ramp Hystersis to 7
-			 * Clock Power/Timing Low
-			 */
-			cmd_ref = 0x04e20707; /* Registered */
-			cmd = pci_read_config32(dev, 0xd4);
-			if(cmd != cmd_ref) {
-				pci_write_config32(dev, 0xd4, cmd_ref );
-				needs_reset = 1; /* Needed? */
-			}
-		}
-#endif
-	}
-	return needs_reset;
-}
-
-static int optimize_link_read_pointers(unsigned nodes)
-{
-	unsigned node;
-	int needs_reset = 0;
-	for(node = 0; node < nodes; node++) {
-		device_t f0_dev, f3_dev;
-		uint32_t cmd_ref, cmd;
-		int link;
-		f0_dev = NODE_HT(node);
-		f3_dev = NODE_MC(node);
-		cmd_ref = cmd = pci_read_config32(f3_dev, 0xdc);
-		for(link = 0; link < 3; link++) {
-			uint32_t link_type;
-			unsigned reg;
-			/* This works on an Athlon64 because unimplemented links return 0 */
-			reg = 0x98 + (link * 0x20);
-			link_type = pci_read_config32(f0_dev, reg);
-			/* Only handle coherent links */
-			if ((link_type & (LinkConnected | InitComplete|NonCoherent)) == 
-				(LinkConnected|InitComplete)) 
-			{
-				cmd &= ~(0xff << (link *8));
-				cmd |= 0x25 << (link *8);
-			}
-		}
-		if (cmd != cmd_ref) {
-			pci_write_config32(f3_dev, 0xdc, cmd);
-			needs_reset = 1;
-		}
-	}
-	return needs_reset;
-}
-
-static inline unsigned get_nodes(void)
-{
-        return ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1;
-}
-
-static int optimize_link_coherent_ht(void)
-{
-        int needs_reset = 0;
-
-        unsigned nodes;
-
-        nodes = get_nodes();
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
-        if(nodes>1) {
-                needs_reset |= optimize_connection(
-                        NODE_HT(0), 0x80 + link_to_register(link_connection(0,1)),
-                        NODE_HT(1), 0x80 + link_to_register(link_connection(1,0)) );
-        }
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 2
-        if(nodes>2) {
-        /* optimize physical connections - by LYH */
-                static const u8 opt_conn4[] = {
-                        0,2,
-                        1,3,
-                        2,3,
-                };
-                needs_reset |= optimize_connection_group(opt_conn4, sizeof(opt_conn4)/sizeof(opt_conn4[0]));
-        }
-#endif
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 4
-        if(nodes>4) {
-                static const uint8_t opt_conn6[] ={
-                        2, 4,
-                        3, 5,
-        #if !CROSS_BAR_47_56
-                        4, 5,
-        #endif
-                };
-                needs_reset |= optimize_connection_group(opt_conn6, sizeof(opt_conn6)/sizeof(opt_conn6[0]));
-        }
-#endif
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 6
-        if(nodes>6) {
-               static const uint8_t opt_conn8[] ={
-                       4, 6,
-        #if CROSS_BAR_47_56
-                       4, 7,
-                       5, 6,
-        #endif
-                       5, 7,
-                       6, 7,
-               };
-                needs_reset |= optimize_connection_group(opt_conn8, sizeof(opt_conn8)/sizeof(opt_conn8[0]));
-        }
-#endif
-
-#endif
-
-        needs_reset |= apply_cpu_errata_fixes(nodes);
-        needs_reset |= optimize_link_read_pointers(nodes);
-
-        return needs_reset;
-}
-
-#if RAMINIT_SYSINFO == 1
-static void setup_coherent_ht_domain(void)
-#else
-static int setup_coherent_ht_domain(void)
-#endif
-{
-	unsigned nodes;
-	nodes = 1;
-
-	enable_bsp_routing();
-
-#if CONFIG_MAX_PHYSICAL_CPUS > 1
-        nodes = setup_smp();
-        nodes = verify_mp_capabilities(nodes);
-        clear_dead_routes(nodes);
-#endif
-
-	if (nodes == 1) {
-		setup_uniprocessor();
-	}
-	coherent_ht_finalize(nodes);
-
-#if RAMINIT_SYSINFO == 0
-	return optimize_link_coherent_ht();
-#endif
-}
-