diff options
author | Yinghai Lu <yinghailu@gmail.com> | 2006-04-03 20:38:34 +0000 |
---|---|---|
committer | Yinghai Lu <yinghailu@gmail.com> | 2006-04-03 20:38:34 +0000 |
commit | 9a791dffeae2097aa0a18f645ce07acfed41b9bc (patch) | |
tree | 2d0359536fe3c1a0c313440b6be4ed09397dade9 /src/northbridge/amd/amdk8 | |
parent | ffb7d8a31ae899f611235cd0a7f3579d34cd8cde (diff) |
new cache_as_ram support
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2232 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/amd/amdk8')
-rw-r--r-- | src/northbridge/amd/amdk8/coherent_ht.c | 9 | ||||
-rw-r--r-- | src/northbridge/amd/amdk8/coherent_ht_car.c | 1826 | ||||
-rw-r--r-- | src/northbridge/amd/amdk8/incoherent_ht.c | 30 | ||||
-rw-r--r-- | src/northbridge/amd/amdk8/raminit.c | 4 | ||||
-rw-r--r-- | src/northbridge/amd/amdk8/reset_test.c | 34 |
5 files changed, 1873 insertions, 30 deletions
diff --git a/src/northbridge/amd/amdk8/coherent_ht.c b/src/northbridge/amd/amdk8/coherent_ht.c index 7d43f3c97d..d29831b74b 100644 --- a/src/northbridge/amd/amdk8/coherent_ht.c +++ b/src/northbridge/amd/amdk8/coherent_ht.c @@ -1,3 +1,10 @@ +#if USE_DCACHE_RAM + +#include "coherent_ht_car.c" + +#else + + /* coherent hypertransport initialization for AMD64 * * written by Stefan Reinauer <stepan@openbios.org> @@ -1824,3 +1831,5 @@ static int setup_coherent_ht_domain(void) result.needs_reset = optimize_link_read_pointers(result.nodes, result.needs_reset); return result.needs_reset; } + +#endif diff --git a/src/northbridge/amd/amdk8/coherent_ht_car.c b/src/northbridge/amd/amdk8/coherent_ht_car.c new file mode 100644 index 0000000000..5b9a87ac63 --- /dev/null +++ b/src/northbridge/amd/amdk8/coherent_ht_car.c @@ -0,0 +1,1826 @@ +/* coherent hypertransport initialization for AMD64 + * + * written by Stefan Reinauer <stepan@openbios.org> + * (c) 2003-2004 by SuSE Linux AG + * + * (c) 2004 Tyan Computer + * 2004.12 yhlu added support to create routing table dynamically. + * it also support 8 ways too. (8 ways ladder or 8 ways crossbar) + * + * This code is licensed under GPL. + */ + +/* + * This algorithm assumes a grid configuration as follows: + * + * nodes : 1 2 4 6 8 + * org. : 1x1 2x1 2x2 2x3 2x4 + Ladder: + CPU7-------------CPU6 + | | + | | + | | + | | + | | + | | + CPU5-------------CPU4 + | | + | | + | | + | | + | | + | | + CPU3-------------CPU2 + | | + | | + | | + | | + | | + | | + CPU1-------------CPU0 + CROSS_BAR_47_56: + CPU7-------------CPU6 + | \____ ___/ | + | \ / | + | \/ | + | /\ | + | / \ | + | ____/ \___ | + CPU5 CPU4 + | | + | | + | | + | | + | | + | | + CPU3-------------CPU2 + | | + | | + | | + | | + | | + | | + CPU1-------------CPU0 + */ + +#include <device/pci_def.h> +#include <device/pci_ids.h> +#include <device/hypertransport_def.h> +#include "arch/romcc_io.h" + +#include "amdk8.h" + +#define enable_bsp_routing() enable_routing(0) + +#define NODE_HT(x) PCI_DEV(0,24+x,0) +#define NODE_MP(x) PCI_DEV(0,24+x,1) +#define NODE_MC(x) PCI_DEV(0,24+x,3) + +#define DEFAULT 0x00010101 /* default row entry */ + +typedef uint8_t u8; +typedef uint32_t u32; + +#ifndef CROSS_BAR_47_56 + #define CROSS_BAR_47_56 0 +#endif + +#ifndef TRY_HIGH_FIRST + #define TRY_HIGH_FIRST 0 +#endif + +#ifndef K8_HT_FREQ_1G_SUPPORT + #define K8_HT_FREQ_1G_SUPPORT 0 +#endif + +#ifndef K8_HT_CHECK_PENDING_LINK + #if CONFIG_MAX_PHYSICAL_CPUS >= 4 + #define K8_HT_CHECK_PENDING_LINK 1 + #else + #define K8_HT_CHECK_PENDING_LINK 0 + #endif +#endif + +#ifndef CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED + #define CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED 0 +#endif + +#ifndef ENABLE_APIC_EXT_ID + #define ENABLE_APIC_EXT_ID 0 +#endif + + +static inline void print_linkn (const char *strval, uint8_t byteval) +{ +#if 1 +#if CONFIG_USE_INIT + printk_debug("%s%02x\r\n", strval, byteval); +#else + print_debug(strval); print_debug_hex8(byteval); print_debug("\r\n"); +#endif +#endif +} + +static void disable_probes(void) +{ + /* disable read/write/fill probes for uniprocessor setup + * they don't make sense if only one cpu is available + */ + + /* Hypetransport Transaction Control Register + * F0:0x68 + * [ 0: 0] Disable read byte probe + * 0 = Probes issues + * 1 = Probes not issued + * [ 1: 1] Disable Read Doubleword probe + * 0 = Probes issued + * 1 = Probes not issued + * [ 2: 2] Disable write byte probes + * 0 = Probes issued + * 1 = Probes not issued + * [ 3: 3] Disable Write Doubleword Probes + * 0 = Probes issued + * 1 = Probes not issued. + * [10:10] Disable Fill Probe + * 0 = Probes issued for cache fills + * 1 = Probes not issued for cache fills. + */ + + u32 val; + + print_spew("Disabling read/write/fill probes for UP... "); + + val=pci_read_config32(NODE_HT(0), HT_TRANSACTION_CONTROL); + val |= HTTC_DIS_FILL_P | HTTC_DIS_RMT_MEM_C | HTTC_DIS_P_MEM_C | + HTTC_DIS_MTS | HTTC_DIS_WR_DW_P | HTTC_DIS_WR_B_P | + HTTC_DIS_RD_DW_P | HTTC_DIS_RD_B_P; + pci_write_config32(NODE_HT(0), HT_TRANSACTION_CONTROL, val); + + print_spew("done.\r\n"); + +} + +static void enable_apic_ext_id(u8 node) +{ +#if ENABLE_APIC_EXT_ID==1 +#warning "FIXME Is the right place to enable apic ext id here?" + + u32 val; + + val = pci_read_config32(NODE_HT(node), 0x68); + val |= (HTTC_APIC_EXT_SPUR | HTTC_APIC_EXT_ID | HTTC_APIC_EXT_BRD_CST); + pci_write_config32(NODE_HT(node), 0x68, val); +#endif +} + +static void enable_routing(u8 node) +{ + u32 val; + + /* HT Initialization Control Register + * F0:0x6C + * [ 0: 0] Routing Table Disable + * 0 = Packets are routed according to routing tables + * 1 = Packets are routed according to the default link field + * [ 1: 1] Request Disable (BSP should clear this) + * 0 = Request packets may be generated + * 1 = Request packets may not be generated. + * [ 3: 2] Default Link (Read-only) + * 00 = LDT0 + * 01 = LDT1 + * 10 = LDT2 + * 11 = CPU on same node + * [ 4: 4] Cold Reset + * - Scratch bit cleared by a cold reset + * [ 5: 5] BIOS Reset Detect + * - Scratch bit cleared by a cold reset + * [ 6: 6] INIT Detect + * - Scratch bit cleared by a warm or cold reset not by an INIT + * + */ + + /* Enable routing table */ + print_spew("Enabling routing table for node "); + print_spew_hex8(node); + + val=pci_read_config32(NODE_HT(node), 0x6c); + val &= ~((1<<1)|(1<<0)); + pci_write_config32(NODE_HT(node), 0x6c, val); + + print_spew(" done.\r\n"); +} + +static void fill_row(u8 node, u8 row, u32 value) +{ + pci_write_config32(NODE_HT(node), 0x40+(row<<2), value); +} + +#if CONFIG_MAX_PHYSICAL_CPUS > 1 +static u8 link_to_register(int ldt) +{ + /* + * [ 0: 3] Request Route + * [0] Route to this node + * [1] Route to Link 0 + * [2] Route to Link 1 + * [3] Route to Link 2 + */ + + if (ldt&0x08) return 0x40; + if (ldt&0x04) return 0x20; + if (ldt&0x02) return 0x00; + + /* we should never get here */ + print_spew("Unknown Link\n"); + return 0; +} + +static u32 get_row(u8 node, u8 row) +{ + return pci_read_config32(NODE_HT(node), 0x40+(row<<2)); +} + +static int link_connection(u8 src, u8 dest) +{ + return get_row(src, dest) & 0x0f; +} + +static void rename_temp_node(u8 node) +{ + uint32_t val; + + print_spew("Renaming current temporary node to "); + print_spew_hex8(node); + + val=pci_read_config32(NODE_HT(7), 0x60); + val &= (~7); /* clear low bits. */ + val |= node; /* new node */ + pci_write_config32(NODE_HT(7), 0x60, val); + + print_spew(" done.\r\n"); +} + +static int verify_connection(u8 dest) +{ + /* See if we have a valid connection to dest */ + u32 val; + + /* Verify that the coherent hypertransport link is + * established and actually working by reading the + * remode node's vendor/device id + */ + val = pci_read_config32(NODE_HT(dest),0); + if(val != 0x11001022) + return 0; + + return 1; +} + +static uint16_t read_freq_cap(device_t dev, uint8_t pos) +{ + /* Handle bugs in valid hypertransport frequency reporting */ + uint16_t freq_cap; + uint32_t id; + + freq_cap = pci_read_config16(dev, pos); + freq_cap &= ~(1 << HT_FREQ_VENDOR); /* Ignore Vendor HT frequencies */ + +#if K8_HT_FREQ_1G_SUPPORT == 1 + if (!is_cpu_pre_e0()) + { + return freq_cap; + } +#endif + + id = pci_read_config32(dev, 0); + + /* AMD K8 Unsupported 1Ghz? */ + if (id == (PCI_VENDOR_ID_AMD | (0x1100 << 16))) { + freq_cap &= ~(1 << HT_FREQ_1000Mhz); + } + + return freq_cap; +} + +static int optimize_connection(device_t node1, uint8_t link1, device_t node2, uint8_t link2) +{ + static const uint8_t link_width_to_pow2[]= { 3, 4, 0, 5, 1, 2, 0, 0 }; + static const uint8_t pow2_to_link_width[] = { 0x7, 4, 5, 0, 1, 3 }; + uint16_t freq_cap1, freq_cap2; + uint8_t width_cap1, width_cap2, width, old_width, ln_width1, ln_width2; + uint8_t freq, old_freq; + int needs_reset; + /* Set link width and frequency */ + + /* Initially assume everything is already optimized and I don't need a reset */ + needs_reset = 0; + + /* Get the frequency capabilities */ + freq_cap1 = read_freq_cap(node1, link1 + PCI_HT_CAP_HOST_FREQ_CAP); + freq_cap2 = read_freq_cap(node2, link2 + PCI_HT_CAP_HOST_FREQ_CAP); + + /* Calculate the highest possible frequency */ + freq = log2(freq_cap1 & freq_cap2); + + /* See if I am changing the link freqency */ + old_freq = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_FREQ); + old_freq &= 0x0f; + needs_reset |= old_freq != freq; + old_freq = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_FREQ); + old_freq &= 0x0f; + needs_reset |= old_freq != freq; + + /* Set the Calulcated link frequency */ + pci_write_config8(node1, link1 + PCI_HT_CAP_HOST_FREQ, freq); + pci_write_config8(node2, link2 + PCI_HT_CAP_HOST_FREQ, freq); + + /* Get the width capabilities */ + width_cap1 = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH); + width_cap2 = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH); + + /* Calculate node1's input width */ + ln_width1 = link_width_to_pow2[width_cap1 & 7]; + ln_width2 = link_width_to_pow2[(width_cap2 >> 4) & 7]; + if (ln_width1 > ln_width2) { + ln_width1 = ln_width2; + } + width = pow2_to_link_width[ln_width1]; + /* Calculate node1's output width */ + ln_width1 = link_width_to_pow2[(width_cap1 >> 4) & 7]; + ln_width2 = link_width_to_pow2[width_cap2 & 7]; + if (ln_width1 > ln_width2) { + ln_width1 = ln_width2; + } + width |= pow2_to_link_width[ln_width1] << 4; + + /* See if I am changing node1's width */ + old_width = pci_read_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1); + old_width &= 0x77; + needs_reset |= old_width != width; + + /* Set node1's widths */ + pci_write_config8(node1, link1 + PCI_HT_CAP_HOST_WIDTH + 1, width); + + // * Calculate node2's width */ + width = ((width & 0x70) >> 4) | ((width & 0x7) << 4); + + /* See if I am changing node2's width */ + old_width = pci_read_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH + 1); + old_width &= 0x77; + needs_reset |= old_width != width; + + /* Set node2's widths */ + pci_write_config8(node2, link2 + PCI_HT_CAP_HOST_WIDTH + 1, width); + + return needs_reset; +} + +static uint8_t get_linkn_first(uint8_t byte) +{ + if(byte & 0x02) { byte = 0; } + else if(byte & 0x04) { byte = 1; } + else if(byte & 0x08) { byte = 2; } + return byte; +} + +static uint8_t get_linkn_last(uint8_t byte) +{ + if(byte & 0x02) { byte &= 0x0f; byte |= 0x00; } + if(byte & 0x04) { byte &= 0x0f; byte |= 0x10; } + if(byte & 0x08) { byte &= 0x0f; byte |= 0x20; } + return byte>>4; +} + +static uint8_t get_linkn_last_count(uint8_t byte) +{ + byte &= 0x0f; + if(byte & 0x02) { byte &= 0xcf; byte |= 0x00; byte+=0x40; } + if(byte & 0x04) { byte &= 0xcf; byte |= 0x10; byte+=0x40; } + if(byte & 0x08) { byte &= 0xcf; byte |= 0x20; byte+=0x40; } + return byte>>4; +} + +static void setup_row_local(u8 source, u8 row) /* source will be 7 when it is for temp use*/ +{ + uint8_t linkn; + uint32_t val; + val = 1; + for(linkn = 0; linkn<3; linkn++) { + uint8_t regpos; + uint32_t reg; + regpos = 0x98 + 0x20 * linkn; + reg = pci_read_config32(NODE_HT(source), regpos); + if ((reg & 0x17) != 3) continue; /* it is not conherent or not connected*/ + val |= 1<<(linkn+1); + } + val <<= 16; + val |= 0x0101; + fill_row(source,row, val); +} + +static void setup_row_direct_x(u8 temp, u8 source, u8 dest, u8 linkn) +{ + uint32_t val; + uint32_t val_s; + val = 1<<(linkn+1); + val |= 1<<(linkn+1+8); /*for direct connect response route should equal to request table*/ + + if(((source &1)!=(dest &1)) +#if CROSS_BAR_47_56 + && ( (source<4)||(source>5) ) //(6,7) (7,6) should still be here + //(6,5) (7,4) should be here +#endif + ){ + val |= (1<<16); + } else { + /*for CROSS_BAR_47_56 47, 56, should be here too + and for 47, 56, 57, 75, 46, 64 we need to substract another link to + 6, 7, 6, 6, 7, 7 + */ + val_s = get_row(temp, source); + val |= ((val_s>>16) - (1<<(linkn+1)))<<16; + } + + fill_row(temp,dest, val ); +} + +#if CROSS_BAR_47_56 +static void opt_broadcast_rt(u8 source, u8 dest, u8 kickout) { + uint32_t val; + val = get_row(source, dest); + val -= link_connection(source, kickout)<<16; + fill_row(source, dest, val); +} + +static void opt_broadcast_rt_group(const u8 *conn, int num) { + int i; + + for(i=0; i<num; i+=3) { + opt_broadcast_rt(conn[i], conn[i+1],conn[i+2]); + } +} +static void opt_broadcast_rt_plus(u8 source, u8 dest, u8 kickout) { + uint32_t val; + val = get_row(source, dest); + val += link_connection(source, kickout)<<16; + fill_row(source, dest, val); +} + +static void opt_broadcast_rt_plus_group(const u8 *conn, int num) { + int i; + + for(i=0; i<num; i+=3) { + opt_broadcast_rt_plus(conn[i], conn[i+1],conn[i+2]); + } +} +#endif + +static void setup_row_direct(u8 source, u8 dest, u8 linkn){ + setup_row_direct_x(source, source, dest, linkn); +} + +static void setup_remote_row_direct(u8 source, u8 dest, u8 linkn){ + setup_row_direct_x(7, source, dest, linkn); +} + +static void setup_temp_row(u8 source, u8 dest) +{ + /* copy val from (source, dest) to (source,7) */ + fill_row(source,7,get_row(source,dest)); +} + +static void clear_temp_row(u8 source) +{ + fill_row(source, 7, DEFAULT); +} + +static void setup_remote_node(u8 node) +{ + static const uint8_t pci_reg[] = { + 0x44, 0x4c, 0x54, 0x5c, 0x64, 0x6c, 0x74, 0x7c, + 0x40, 0x48, 0x50, 0x58, 0x60, 0x68, 0x70, 0x78, + 0x84, 0x8c, 0x94, 0x9c, 0xa4, 0xac, 0xb4, 0xbc, + 0x80, 0x88, 0x90, 0x98, 0xa0, 0xa8, 0xb0, 0xb8, + 0xc4, 0xcc, 0xd4, 0xdc, + 0xc0, 0xc8, 0xd0, 0xd8, + 0xe0, 0xe4, 0xe8, 0xec, + }; + int i; + + print_spew("setup_remote_node: "); + + /* copy the default resource map from node 0 */ + for(i = 0; i < sizeof(pci_reg)/sizeof(pci_reg[0]); i++) { + uint32_t value; + uint8_t reg; + reg = pci_reg[i]; + value = pci_read_config32(NODE_MP(0), reg); + pci_write_config32(NODE_MP(7), reg, value); + + } + print_spew("done\r\n"); +} + +#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1*/ + + +#if CONFIG_MAX_PHYSICAL_CPUS > 2 +#if !CROSS_BAR_47_56 +static void setup_row_indirect_x(u8 temp, u8 source, u8 dest) +#else +static void setup_row_indirect_x(u8 temp, u8 source, u8 dest, u8 gateway, u8 diff) +#endif +{ + /*for indirect connection, we need to compute the val from val_s(source, source), and val_g(source, gateway) */ + uint32_t val_s; + uint32_t val; +#if !CROSS_BAR_47_56 + u8 gateway; + u8 diff; + if(source<dest) { + gateway = source + 2; + } else { + gateway = source - 2; + } +#endif + val_s = get_row(temp, source); + val = get_row(temp, gateway); + + val &= 0xffff; + val_s >>= 16; + val_s &= 0xfe; + +#if !CROSS_BAR_47_56 + diff = ((source&1)!=(dest &1)); +#endif + + if(diff && (val_s!=(val&0xff)) ) { /* use another connect as response*/ + val_s -= val & 0xff; +#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1) + uint8_t byte; + /* Some node have two links left + * don't worry we only have (2, (3 as source need to handle + */ + byte = val_s; + byte = get_linkn_last_count(byte); + if((byte>>2)>1) { /* make sure not the corner*/ + if(source<dest) { + val_s-=link_connection(temp, source-2); /* -down*/ + } else { +#if CROSS_BAR_47_56 + #if 0 + if(source==7) { + val_s-=link_connection(temp, 6); // for 7,2 via 5 + } else if (source==6){ + val_s-=link_connection(temp, 7); // for 6,3 via 4 + } else + #endif + if (source < gateway) { // for 5, 4 via 7 + val_s-=link_connection(temp, source-2); + } else +#endif + val_s-=link_connection(temp, source+2); /* -up*/ + } + } +#endif + val &= 0xff; + val |= (val_s<<8); + } + + if(diff) { /* cross rung?*/ + val |= (1<<16); + } + else { + val_s = get_row(temp, source); + val |= ((val_s>>16) - link_connection(temp, gateway))<<16; + } + + fill_row(temp, dest, val); + +} + +#if !CROSS_BAR_47_56 +static void setup_row_indirect(u8 source, u8 dest) +{ + setup_row_indirect_x(source, source, dest); +} +#else +static void setup_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff) +{ + setup_row_indirect_x(source, source, dest, gateway, diff); +} +#endif + +static void setup_row_indirect_group(const u8 *conn, int num) +{ + int i; + +#if !CROSS_BAR_47_56 + for(i=0; i<num; i+=2) { + setup_row_indirect(conn[i], conn[i+1]); +#else + for(i=0; i<num; i+=4) { + setup_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]); +#endif + + } +} + +#if !CROSS_BAR_47_56 +static void setup_remote_row_indirect(u8 source, u8 dest) +{ + setup_row_indirect_x(7, source, dest); +} +#else +static void setup_remote_row_indirect(u8 source, u8 dest, u8 gateway, u8 diff) +{ + setup_row_indirect_x(7, source, dest, gateway, diff); +} +#endif + +static void setup_remote_row_indirect_group(const u8 *conn, int num) +{ + int i; + +#if !CROSS_BAR_47_56 + for(i=0; i<num; i+=2) { + setup_remote_row_indirect(conn[i], conn[i+1]); +#else + for(i=0; i<num; i+=4) { + setup_remote_row_indirect(conn[i], conn[i+1],conn[i+2], conn[i+3]); +#endif + } +} + +#endif /*CONFIG_MAX_PHYSICAL_CPUS > 2*/ + + +static void setup_uniprocessor(void) +{ + print_spew("Enabling UP settings\r\n"); +#if CONFIG_LOGICAL_CPUS==1 + unsigned tmp = (pci_read_config32(NODE_MC(0), 0xe8) >> 12) & 3; + if (tmp>0) return; +#endif + disable_probes(); +} + +#if CONFIG_MAX_PHYSICAL_CPUS > 2 +static int optimize_connection_group(const u8 *opt_conn, int num) { + int needs_reset = 0; + int i; + for(i=0; i<num; i+=2) { + needs_reset = optimize_connection( + NODE_HT(opt_conn[i]), 0x80 + link_to_register(link_connection(opt_conn[i],opt_conn[i+1])), + NODE_HT(opt_conn[i+1]), 0x80 + link_to_register(link_connection(opt_conn[i+1],opt_conn[i])) ); + } + return needs_reset; +} +#endif + +#if CONFIG_MAX_PHYSICAL_CPUS > 1 +static unsigned setup_smp2(void) +{ + unsigned nodes; + u8 byte; + uint32_t val; + nodes = 2; + + setup_row_local(0, 0); /* it will update the broadcast RT*/ + + val = get_row(0,0); + byte = (val>>16) & 0xfe; + if(byte<0x2) { /* no coherent connection so get out.*/ + nodes = 1; + return nodes; + } + + /* Setup and check a temporary connection to node 1 */ +#if TRY_HIGH_FIRST == 1 + byte = get_linkn_last(byte); /* Max Link to node1 */ +#else + byte = get_linkn_first(byte); /*Min Link to node1 --- according to AMD*/ +#endif + print_linkn("(0,1) link=", byte); + setup_row_direct(0,1, byte); + setup_temp_row(0, 1); + + verify_connection(7); + + /* We found 2 nodes so far */ + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /*get default link on node7 to node0*/ + print_linkn("(1,0) link=", byte); + setup_row_local(7,1); + setup_remote_row_direct(1, 0, byte); + +#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1) + val = get_row(7,1); + byte = (val>>16) & 0xfe; + byte = get_linkn_last_count(byte); + if((byte>>2)==3) { /* Oh! we need to treat it as node2. So use another link*/ + val = get_row(0,0); + byte = (val>>16) & 0xfe; +#if TRY_HIGH_FIRST == 1 + byte = get_linkn_first(byte); /* Min link to Node1 */ +#else + byte = get_linkn_last(byte); /* Max link to Node1*/ +#endif + print_linkn("\t-->(0,1) link=", byte); + setup_row_direct(0,1, byte); + setup_temp_row(0, 1); + + verify_connection(7); + + /* We found 2 nodes so far */ + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on node7 to node0*/ + print_linkn("\t-->(1,0) link=", byte); + setup_row_local(7,1); + setup_remote_row_direct(1, 0, byte); + } +#endif + + setup_remote_node(1); /* Setup the regs on the remote node */ + rename_temp_node(1); /* Rename Node 7 to Node 1 */ + enable_routing(1); /* Enable routing on Node 1 */ +#if 0 + /*don't need and it is done by clear_dead_links */ + clear_temp_row(0); +#endif + + return nodes; +} +#endif /*CONFIG_MAX_PHYSICAL_CPUS > 1 */ + +#if CONFIG_MAX_PHYSICAL_CPUS > 2 + +static unsigned setup_smp4(void) +{ + unsigned nodes; + u8 byte; + uint32_t val; + + nodes=4; + + /* Setup and check temporary connection from Node 0 to Node 2 */ + val = get_row(0,0); + byte = ((val>>16) & 0xfe) - link_connection(0,1); + byte = get_linkn_last_count(byte); + + if((byte>>2)==0) { /* We should have two coherent for 4p and above*/ + nodes = 2; + return nodes; + } + + byte &= 3; /* bit [3,2] is count-1*/ + print_linkn("(0,2) link=", byte); + setup_row_direct(0, 2, byte); /*(0,2) direct link done*/ + + /* We found 3 nodes so far. Now setup a temporary + * connection from node 0 to node 3 via node 1 + */ + setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ + /* here should setup_row_direct(1,3) at first, before that we should find the link in node 1 to 3*/ + val = get_row(1,1); + byte = ((val>>16) & 0xfe) - link_connection(1,0); + byte = get_linkn_first(byte); + print_linkn("(1,3) link=", byte); + setup_row_direct(1,3,byte); /* (1, 3) direct link done*/ + + /* We found 4 nodes so far. Now setup all nodes for 4p */ + // We need to make sure 0,2 and 1,3 link is set already +#if !CROSS_BAR_47_56 + static const u8 conn4_1[] = { + 0,3, + 1,2, + }; +#else + static const u8 conn4_1[] = { + 0,3,2,1, + 1,2,3,1, + }; +#endif + + setup_row_indirect_group(conn4_1, sizeof(conn4_1)/sizeof(conn4_1[0])); + + setup_temp_row(0,2); + verify_connection(7); + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on 7 to 0*/ + print_linkn("(2,0) link=", byte); + + setup_row_local(7,2); + setup_remote_row_direct(2, 0, byte); /* node 2 to node 0 direct link done */ + setup_remote_node(2); /* Setup the regs on the remote node */ + + rename_temp_node(2); /* Rename Node 7 to Node 2 */ + enable_routing(2); /* Enable routing on Node 2 */ + + setup_temp_row(0,1); + setup_temp_row(1,3); + verify_connection(7); + + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on 7 to 1*/ + print_linkn("(3,1) link=", byte); + + setup_row_local(7,3); + setup_remote_row_direct(3, 1, byte); /* node 3 to node 1 direct link done */ + setup_remote_node(3); /* Setup the regs on the remote node */ + + /* We need to init link between 2, and 3 direct link */ + val = get_row(2,2); + byte = ((val>>16) & 0xfe) - link_connection(2,0); + byte = get_linkn_last_count(byte); + print_linkn("(2,3) link=", byte & 3); + + setup_row_direct(2,3, byte & 0x3); + setup_temp_row(0,2); + setup_temp_row(2,3); + verify_connection(7); /* to 3*/ + +#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1) + /* We need to find out which link is to node3 */ + if((byte>>2)==2) { /* one to node3, one to node0, one to node4*/ + val = get_row(7,3); + if((val>>16) == 1) { /* that link is to node4, because via node1 it has been set, recompute it*/ + val = get_row(2,2); + byte = ((val>>16) & 0xfe) - link_connection(2,0); + byte = get_linkn_first(byte); + print_linkn("\t-->(2,3) link=", byte); + setup_row_direct(2,3,byte); + setup_temp_row(2,3); + verify_connection(7); /* to 3*/ + } + } +#endif + + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on 7 to 2*/ + print_linkn("(3,2) link=", byte); + setup_remote_row_direct(3,2, byte); + +#if (CONFIG_MAX_PHYSICAL_CPUS > 4) || (CONFIG_MAX_PHYSICAL_CPUS_4_BUT_MORE_INSTALLED == 1) + /* set link from 3 to 5 before enable it*/ + val = get_row(7,3); + byte = ((val>>16) & 0xfe) - link_connection(7,2) - link_connection(7,1); + byte = get_linkn_last_count(byte); + if((byte>>2)==1) { /* We should have three coherent links on node 3 for 6p and above*/ + byte &= 3; /*bit [3,2] is count-2*/ + print_linkn("(3,5) link=", byte); + setup_remote_row_direct(3, 5, byte); + } + + val = get_row(2,2); + byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0); + byte = get_linkn_last_count(byte); + + if((byte>>2)==1) { /* We should have three coherent link on node 2 for 6p and above*/ + byte &= 3; /* bit [3,2] is count-2*/ + print_linkn("(2,4) link=", byte); + setup_row_direct(2, 4, byte); + } +#endif + + //Beside 3, 1 is set, We need to make sure 3, 5 is set already in case has three link in 3 +#if !CROSS_BAR_47_56 + static const u8 conn4_3[] = { + 3,0, + }; +#else + static const u8 conn4_3[] = { + 3,0,1,1, + }; +#endif + setup_remote_row_indirect_group(conn4_3, sizeof(conn4_3)/sizeof(conn4_3[0])); + +/* ready to enable RT for Node 3 */ + rename_temp_node(3); + enable_routing(3); /* enable routing on node 3 (temp.) */ + + // beside 2, 0 is set, We need to make sure 2, 4 link is set already in case has three link in 2 +#if !CROSS_BAR_47_56 + static const u8 conn4_2[] = { + 2,1, + }; +#else + static const u8 conn4_2[] = { + 2,1,0,1, + }; +#endif + setup_row_indirect_group(conn4_2, sizeof(conn4_2)/sizeof(conn4_2[0])); + +#if 0 + /*We need to do sth to reverse work for setup_temp_row (0,1) (1,3) */ + /* it will be done by clear_dead_links */ + clear_temp_row(0); + clear_temp_row(1); +#endif + + return nodes; + +} + +#endif /* CONFIG_MAX_PHYSICAL_CPUS > 2 */ + +#if CONFIG_MAX_PHYSICAL_CPUS > 4 + +static unsigned setup_smp6(void) +{ + unsigned nodes; + u8 byte; + uint32_t val; + + nodes=6; + + /* Setup and check temporary connection from Node 0 to Node 4 through 2*/ + val = get_row(2,2); + byte = ((val>>16) & 0xfe) - link_connection(2,3) - link_connection(2,0); + byte = get_linkn_last_count(byte); + + if((byte>>2)==0) { /* We should have three coherent link on node 2 for 6p and above*/ + nodes = 4; + return nodes; + } + + /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3*/ + /* set link from 3 to 5 before enable it*/ + val = get_row(3,3); + byte = ((val>>16) & 0xfe) - link_connection(3,2) - link_connection(3,1); + byte = get_linkn_last_count(byte); + if((byte>>2)==0) { /* We should have three coherent links on node 3 for 6p and above*/ + nodes = 4; + return nodes; + } + + /* We found 6 nodes so far. Now setup all nodes for 6p */ +#warning "FIXME we need to find out the correct gateway for 6p" + static const u8 conn6_1[] = { +#if !CROSS_BAR_47_56 + 0, 4, + 0, 5, + 1, 4, + 1, 5, + 2, 5, + 3, 4, +#else + 0, 4, 2, 0, + 0, 5, 2, 1, + 1, 4, 3, 1, + 1, 5, 3, 0, + 2, 5, 3, 0, + 3, 4, 2, 0, +#endif + }; + + setup_row_indirect_group(conn6_1, sizeof(conn6_1)/sizeof(conn6_1[0])); + + for(byte=0; byte<4; byte+=2) { + setup_temp_row(byte,byte+2); + } + verify_connection(7); + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /*get default link on 7 to 2*/ + print_linkn("(4,2) link=", byte); + + setup_row_local(7,4); + setup_remote_row_direct(4, 2, byte); + setup_remote_node(4); /* Setup the regs on the remote node */ + + /* Set indirect connection to 0, to 3 */ + //we only need to set 4,0 here + static const u8 conn6_2[] = { +#if !CROSS_BAR_47_56 + 4, 0, +#else + 4, 0, 2, 0, +#endif + }; + + setup_remote_row_indirect_group(conn6_2, sizeof(conn6_2)/sizeof(conn6_2[0])); + + rename_temp_node(4); + enable_routing(4); + + setup_temp_row(0,1); + for(byte=0; byte<4; byte+=2) { + setup_temp_row(byte+1,byte+3); + } + verify_connection(7); + + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on 7 to 3*/ + print_linkn("(5,3) link=", byte); + setup_row_local(7,5); + setup_remote_row_direct(5, 3, byte); + setup_remote_node(5); /* Setup the regs on the remote node */ + +#if !CROSS_BAR_47_56 + /* We need to init link between 4, and 5 direct link */ + val = get_row(4,4); + byte = ((val>>16) & 0xfe) - link_connection(4,2); + byte = get_linkn_last_count(byte); + print_linkn("(4,5) link=", byte & 3); + + setup_row_direct(4,5, byte & 0x3); + setup_temp_row(0,2); + setup_temp_row(2,4); + setup_temp_row(4,5); + verify_connection(7); /* to 5*/ + +#if CONFIG_MAX_PHYSICAL_CPUS > 6 + /* We need to find out which link is to node5 */ + + if((byte>>2)==2) { /* one to node5, one to node2, one to node6*/ + val = get_row(7,5); + if((val>>16) == 1) { /* that link is to node6, because via node 3 node 5 has been set*/ + val = get_row(4,4); + byte = ((val>>16) & 0xfe) - link_connection(4,2); + byte = get_linkn_first(byte); + print_linkn("\t-->(4,5) link=", byte); + setup_row_direct(4,5,byte); + setup_temp_row(4,5); + verify_connection(7); /* to 5*/ + } + } +#endif + + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on 7 to 4*/ + print_linkn("(5,4) link=", byte); + setup_remote_row_direct(5,4, byte); + + //init 5, 7 here + val = get_row(7,5); + byte = ((val>>16) & 0xfe) - link_connection(7,4) - link_connection(7,3); + byte = get_linkn_last_count(byte); + if((byte>>2)==1) { /* We should have three coherent links on node 5 for 6p and above*/ + byte &= 3; /*bit [3,2] is count-2*/ + print_linkn("(5,7) link=", byte); + setup_remote_row_direct(5, 7, byte); + } + + //init 4,6 here + val = get_row(4,4); + byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2); + byte = get_linkn_last_count(byte); + + if((byte>>2)==1) { /* We should have three coherent link on node 4 for 6p and above*/ + byte &= 3; /* bit [3,2] is count-2*/ + print_linkn("(4,6) link=", byte); + setup_row_direct(4, 6, byte); + } + +#endif + + //We need to set 5,0 here only, We need to set up 5, 7 to make 5,0 + /* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */ + static const u8 conn6_3[] = { +#if !CROSS_BAR_47_56 + 5, 0, +#else + 5, 0, 3, 0, +#endif + }; + + setup_remote_row_indirect_group(conn6_3, sizeof(conn6_3)/sizeof(conn6_3[0])); + +/* ready to enable RT for 5 */ + rename_temp_node(5); + enable_routing(5); /* enable routing on node 5 (temp.) */ + + static const u8 conn6_4[] = { +#if !CROSS_BAR_47_56 + 4, 1, + 4, 3, + + 5, 2, + 5, 1, + +#else + 4, 1, 2, 0, + 4, 3, 2, 0, + 4, 5, 2, 0, + + 5, 2, 3, 0, + 5, 1, 3, 0, + 5, 4, 3, 0, + +#endif + }; + + setup_row_indirect_group(conn6_4, sizeof(conn6_4)/sizeof(conn6_4[0])); + +#if 0 + /* We need to do sth about reverse about setup_temp_row (0,1), (2,4), (1, 3), (3,5) + * It will be done by clear_dead_links + */ + for(byte=0; byte<4; byte++) { + clear_temp_row(byte); + } +#endif + + return nodes; + +} + +#endif /* CONFIG_MAX_PHYSICAL_CPUS > 4 */ + +#if CONFIG_MAX_PHYSICAL_CPUS > 6 + +static unsigned setup_smp8(void) +{ + unsigned nodes; + u8 byte; + uint32_t val; + + nodes=8; + + /* Setup and check temporary connection from Node 0 to Node 6 via 2 and 4 to 7 */ + val = get_row(4,4); +#if CROSS_BAR_47_56 + byte = ((val>>16) & 0xfe) - link_connection(4,2); +#else + byte = ((val>>16) & 0xfe) - link_connection(4,5) - link_connection(4,2); + byte = get_linkn_last_count(byte); /* Max link to 6*/ + if((byte>>2)==0) { /* We should have two or three coherent links on node 4 for 8p*/ + nodes = 6; + return nodes; + } +#endif + +#if CROSS_BAR_47_56 + byte = get_linkn_last_count(byte); /* Max link to 6*/ + if((byte>>2)<2) { /* We should have two or three coherent links on node 4 for 8p*/ + nodes = 6; + return nodes; + } +#if TRY_HIGH_FIRST == 1 + byte = ((val>>16) & 0xfe) - link_connection(4,2); + byte = get_linkn_first(byte); /*Min link to 6*/ +#else + byte &= 3; /* bit [3,2] is count-1 or 2*/ +#endif + print_linkn("(4,6) link=", byte); + setup_row_direct(4, 6, byte); +#endif + +#if !CROSS_BAR_47_56 + /* Setup and check temporary connection from Node 0 to Node 7 through 1, 3, 5*/ + val = get_row(5,5); + byte = ((val>>16) & 0xfe) - link_connection(5,4) - link_connection(5,3); + byte = get_linkn_last_count(byte); + if((byte>>2)==0) { /* We should have three coherent links on node 5 for 6p and above*/ + nodes = 6; + return nodes; + } +#endif + + /* We found 8 nodes so far. Now setup all nodes for 8p */ + static const u8 conn8_1[] = { +#if !CROSS_BAR_47_56 + 0, 6, + /*0, 7,*/ + 1, 6, + /*1, 7,*/ + 2, 6, + /*2, 7,*/ + 3, 6, + /*3, 7,*/ + /*4, 7,*/ + 5, 6, +#else + 0, 6, 2, 0, + /*0, 7, 2, 0,*/ + 1, 6, 3, 0, + /*1, 7, 3, 0,*/ + 2, 6, 4, 0, + /*2, 7, 4, 0,*/ + 3, 6, 5, 1, + /*3, 7, 5, 0,*/ +#endif + }; + + setup_row_indirect_group(conn8_1,sizeof(conn8_1)/sizeof(conn8_1[0])); + + for(byte=0; byte<6; byte+=2) { + setup_temp_row(byte,byte+2); + } + verify_connection(7); + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on 7 to 4*/ + print_linkn("(6,4) link=", byte); + + setup_row_local(7,6); + setup_remote_row_direct(6, 4, byte); + setup_remote_node(6); /* Setup the regs on the remote node */ + /* Set indirect connection to 0, to 3 */ +#warning "FIXME we need to find out the correct gateway for 8p" + static const u8 conn8_2[] = { +#if !CROSS_BAR_47_56 + 6, 0, +#else + 6, 0, 4, 0, +#endif + }; + + setup_remote_row_indirect_group(conn8_2, sizeof(conn8_2)/sizeof(conn8_2[0])); + +#if CROSS_BAR_47_56 + //init 5, 6 here + /* here init 5, 6 */ + /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/ + val = get_row(5,5); + byte = ((val>>16) & 0xfe) - link_connection(5,3); +#if TRY_HIGH_FIRST == 1 + byte = get_linkn_first(byte); +#else + byte = get_linkn_last(byte); +#endif + print_linkn("(5,6) link=", byte); + setup_row_direct(5, 6, byte); + + setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ + for(byte=0; byte<4; byte+=2) { + setup_temp_row(byte+1,byte+3); + } + setup_temp_row(5,6); + + verify_connection(7); + + val = get_row(7,6); // to chect it if it is node6 before renaming + if( (val>>16) == 1) { // it is real node 7 so swap it + /* We need to recompute link to 6 */ + val = get_row(5,5); + byte = ((val>>16) & 0xfe) - link_connection(5,3); +#if TRY_HIGH_FIRST == 1 + byte = get_linkn_first(byte); +#else + byte = get_linkn_last(byte); +#endif + print_linkn("\t-->(5,6) link=", byte); + setup_row_direct(5, 6, byte); +#if 0 + setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ + for(byte=0; byte<4; byte+=2) { + setup_temp_row(byte+1,byte+3); + } +#endif + setup_temp_row(5,6); + + verify_connection(7); + } + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on 7 to 5*/ + print_linkn("(6,5) link=", byte); + setup_remote_row_direct(6, 5, byte); + /*Till now 56, 65 done */ +#endif + + rename_temp_node(6); + enable_routing(6); + +#if !CROSS_BAR_47_56 + setup_temp_row(0,1); + for(byte=0; byte<6; byte+=2) { + setup_temp_row(byte+1,byte+3); + } + + verify_connection(7); + + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on 7 to 5*/ + print_linkn("(7,5) link=", byte); + setup_row_local(7,7); + setup_remote_row_direct(7, 5, byte); + +#else + val = get_row(4,4); + byte = ((val>>16) & 0xfe) - link_connection(4,2) - link_connection(4,6); + byte = get_linkn_first(byte); + print_linkn("(4,7) link=", byte); + setup_row_direct(4, 7, byte); + + /* Setup and check temporary connection from Node 0 to Node 7 through 2, and 4*/ + for(byte=0; byte<4; byte+=2) { + setup_temp_row(byte,byte+2); + } + + verify_connection(7); + + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on 7 to 4*/ + print_linkn("(7,4) link=", byte); + setup_row_local(7,7); + setup_remote_row_direct(7, 4, byte); + /* till now 4-7, 7-4 done. */ +#endif + setup_remote_node(7); /* Setup the regs on the remote node */ + +#if CROSS_BAR_47_56 + /* here init 5, 7 */ + /* Setup and check temporary connection from Node 0 to Node 5 through 1, 3, 5*/ + val = get_row(5,5); + byte = ((val>>16) & 0xfe) - link_connection(5,3) - link_connection(5,6); + byte = get_linkn_first(byte); + print_linkn("(5,7) link=", byte); + setup_row_direct(5, 7, byte); + + setup_temp_row(0,1); /* temp. link between nodes 0 and 1 */ + for(byte=0; byte<4; byte+=2) { + setup_temp_row(byte+1,byte+3); + } + + verify_connection(7); + + val = pci_read_config32(NODE_HT(7), 0x6c); + byte = (val>>2) & 0x3; /* get default link on 7 to 5*/ + print_linkn("(7,5) link=", byte); + setup_remote_row_direct(7, 5, byte); + /*Till now 57, 75 done */ + +#endif + + /* We need to init link between 6, and 7 direct link */ + val = get_row(6,6); +#if !CROSS_BAR_47_56 + byte = ((val>>16) & 0xfe) - link_connection(6,4); +#else + byte = ((val>>16) & 0xfe) - link_connection(6,4) - link_connection(6,5); +#endif + byte = get_linkn_first(byte); + print_linkn("(6,7) link=", byte); + setup_row_direct(6,7, byte); + + val = get_row(7,7); +#if !CROSS_BAR_47_56 + byte = ((val>>16) & 0xfe) - link_connection(7,5); +#else + byte = ((val>>16) & 0xfe) - link_connection(7,5) - link_connection(7,4); +#endif + byte = get_linkn_first(byte); + print_linkn("(7,6) link=", byte); + setup_row_direct(7,6, byte); + + /* Set indirect connection to 0, to 3 for indirect we will use clockwise routing */ + static const u8 conn8_3[] = { +#if !CROSS_BAR_47_56 + 0, 7, /* restore it*/ + 1, 7, + 2, 7, + 3, 7, + 4, 7, + + 6, 1, + 6, 2, + 6, 3, + 6, 5, + + 7, 0, + 7, 1, + 7, 2, + 7, 3, + 7, 4, +#else + + + 4, 5, 6, 1, + 5, 4, 7, 1, + + 6, 1, 5, 0, // or 4, 1 + 6, 2, 4, 0, + 6, 3, 5, 0, // or 4, 1 + + 7, 0, 4, 0, // or 5, 1 + 7, 1, 5, 0, + 7, 2, 4, 0, // or 5, 1 + 7, 3, 5, 0, + + 0, 7, 2, 0, /* restore it*/ + 1, 7, 3, 0, + 2, 7, 4, 1, + 3, 7, 5, 0, + + 2, 5, 4, 1, /* reset it */ + 3, 4, 5, 1, + + 4, 1, 2, 1, /* reset it */ + 4, 3, 2, 1, + + 5, 2, 3, 1, /* reset it */ + 5, 0, 3, 1, + +#endif + }; + + setup_row_indirect_group(conn8_3, sizeof(conn8_3)/sizeof(conn8_3[0])); + +#if CROSS_BAR_47_56 + /* for 47, 56, 57, 75, 46, 64 we need to substract another link to + 6, 7, 6, 6, 7, 7 */ + static const u8 conn8_4[] = { +//direct + 4, 7, 6, + 5, 6, 7, + 5, 7, 6, + 7, 5, 6, + 4, 6, 7, + 6, 4, 7, + +//in direct + 0, 6, 1, + 0, 7, 1, + + 1, 6, 0, + 1, 7, 0, + + 2, 6, 3, +// 2, 7, 3, + + +// 3, 6, 1, + + 3, 7, 2, + + 6, 0, 7, + 6, 1, 7, // needed for via 5 + 6, 1, 4, // ??? + 6, 2, 7, + 6, 3, 7, // needed for via 5 + 6, 3, 4, //??? + 7, 0, 6, // needed for via 4 + 7, 0, 5, //??? + 7, 1, 6, + 7, 2, 6, // needed for via 4 + 7, 2, 5, //??? + 7, 3, 6, + }; + + opt_broadcast_rt_group(conn8_4, sizeof(conn8_4)/sizeof(conn8_4[0])); + + static const u8 conn8_5[] = { + 2, 7, 0, + + 3, 6, 1, + }; + + opt_broadcast_rt_plus_group(conn8_5, sizeof(conn8_5)/sizeof(conn8_5[0])); +#endif + + + +/* ready to enable RT for Node 7 */ + enable_routing(7); /* enable routing on node 7 (temp.) */ + + return nodes; +} + +#endif /* CONFIG_MAX_PHYSICAL_CPUS > 6 */ + + +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + +static unsigned setup_smp(void) +{ + unsigned nodes; + + print_spew("Enabling SMP settings\r\n"); + + nodes = setup_smp2(); +#if CONFIG_MAX_PHYSICAL_CPUS > 2 + if(nodes == 2) + nodes = setup_smp4(); +#endif + +#if CONFIG_MAX_PHYSICAL_CPUS > 4 + if(nodes == 4) + nodes = setup_smp6(); +#endif + +#if CONFIG_MAX_PHYSICAL_CPUS > 6 + if(nodes == 6) + nodes = setup_smp8(); +#endif + +#if CONFIG_USE_INIT + printk_debug("%02x nodes initialized.\r\n", nodes); +#else + print_debug_hex8(nodes); + print_debug(" nodes initialized.\r\n"); +#endif + + return nodes; +} + +static unsigned verify_mp_capabilities(unsigned nodes) +{ + unsigned node, mask; + + mask = 0x06; /* BigMPCap */ + + for (node=0; node<nodes; node++) { + mask &= pci_read_config32(NODE_MC(node), 0xe8); + } + + switch(mask) { +#if CONFIG_MAX_PHYSICAL_CPUS > 2 + case 0x02: /* MPCap */ + if(nodes > 2) { + print_err("Going back to DP\r\n"); + return 2; + } + break; +#endif + case 0x00: /* Non SMP */ + if(nodes >1 ) { + print_err("Going back to UP\r\n"); + return 1; + } + break; + } + + return nodes; + +} + + +static void clear_dead_routes(unsigned nodes) +{ + int last_row; + int node, row; +#if CONFIG_MAX_PHYSICAL_CPUS == 8 + if(nodes==8) return;/* don't touch (7,7)*/ +#endif + last_row = nodes; + if (nodes == 1) { + last_row = 0; + } + for(node = 7; node >= 0; node--) { + for(row = 7; row >= last_row; row--) { + fill_row(node, row, DEFAULT); + } + } + + /* Update the local row */ + for( node=0; node<nodes; node++) { + uint32_t val = 0; + for(row =0; row<nodes; row++) { + val |= get_row(node, row); + } + fill_row(node, node, (((val & 0xff) | ((val >> 8) & 0xff)) << 16) | 0x0101); + } +} +#endif /* CONFIG_MAX_PHYSICAL_CPUS > 1 */ + +#if CONFIG_LOGICAL_CPUS==1 +static unsigned verify_dualcore(unsigned nodes) +{ + unsigned node, totalcpus, tmp; + + totalcpus = 0; + for (node=0; node<nodes; node++) { + tmp = (pci_read_config32(NODE_MC(node), 0xe8) >> 12) & 3 ; + totalcpus += (tmp + 1); + } + + return totalcpus; + +} +#endif + +static void coherent_ht_finalize(unsigned nodes) +{ + unsigned node; + int rev_a0; +#if CONFIG_LOGICAL_CPUS==1 + unsigned total_cpus; + + if(read_option(CMOS_VSTART_dual_core, CMOS_VLEN_dual_core, 0) == 0) { /* dual_core */ + total_cpus = verify_dualcore(nodes); + } + else { + total_cpus = nodes; + } +#endif + + /* set up cpu count and node count and enable Limit + * Config Space Range for all available CPUs. + * Also clear non coherent hypertransport bus range + * registers on Hammer A0 revision. + */ + + print_spew("coherent_ht_finalize\r\n"); + rev_a0 = is_cpu_rev_a0(); + for (node = 0; node < nodes; node++) { + device_t dev; + uint32_t val; + dev = NODE_HT(node); + + /* Set the Total CPU and Node count in the system */ + val = pci_read_config32(dev, 0x60); + val &= (~0x000F0070); +#if CONFIG_LOGICAL_CPUS==1 + val |= ((total_cpus-1)<<16)|((nodes-1)<<4); +#else + val |= ((nodes-1)<<16)|((nodes-1)<<4); +#endif + pci_write_config32(dev, 0x60, val); + + /* Only respond to real cpu pci configuration cycles + * and optimize the HT settings + */ + val=pci_read_config32(dev, HT_TRANSACTION_CONTROL); + val &= ~((HTTC_BUF_REL_PRI_MASK << HTTC_BUF_REL_PRI_SHIFT) | + (HTTC_MED_PRI_BYP_CNT_MASK << HTTC_MED_PRI_BYP_CNT_SHIFT) | + (HTTC_HI_PRI_BYP_CNT_MASK << HTTC_HI_PRI_BYP_CNT_SHIFT)); + val |= HTTC_LIMIT_CLDT_CFG | + (HTTC_BUF_REL_PRI_8 << HTTC_BUF_REL_PRI_SHIFT) | + (3 << HTTC_MED_PRI_BYP_CNT_SHIFT) | + (3 << HTTC_HI_PRI_BYP_CNT_SHIFT); + pci_write_config32(dev, HT_TRANSACTION_CONTROL, val); + + if (rev_a0) { + pci_write_config32(dev, 0x94, 0); + pci_write_config32(dev, 0xb4, 0); + pci_write_config32(dev, 0xd4, 0); + } + } + + print_spew("done\r\n"); +} + +static int apply_cpu_errata_fixes(unsigned nodes) +{ + unsigned node; + int needs_reset = 0; + for(node = 0; node < nodes; node++) { + device_t dev; + uint32_t cmd; + dev = NODE_MC(node); + if (is_cpu_pre_c0()) { + + /* Errata 66 + * Limit the number of downstream posted requests to 1 + */ + cmd = pci_read_config32(dev, 0x70); + if ((cmd & (3 << 0)) != 2) { + cmd &= ~(3<<0); + cmd |= (2<<0); + pci_write_config32(dev, 0x70, cmd ); + needs_reset = 1; + } + cmd = pci_read_config32(dev, 0x7c); + if ((cmd & (3 << 4)) != 0) { + cmd &= ~(3<<4); + cmd |= (0<<4); + pci_write_config32(dev, 0x7c, cmd ); + needs_reset = 1; + } + /* Clock Power/Timing Low */ + cmd = pci_read_config32(dev, 0xd4); + if (cmd != 0x000D0001) { + cmd = 0x000D0001; + pci_write_config32(dev, 0xd4, cmd); + needs_reset = 1; /* Needed? */ + } + + } + else if (is_cpu_pre_d0()) { // d0 later don't need it + uint32_t cmd_ref; + /* Errata 98 + * Set Clk Ramp Hystersis to 7 + * Clock Power/Timing Low + */ + cmd_ref = 0x04e20707; /* Registered */ + cmd = pci_read_config32(dev, 0xd4); + if(cmd != cmd_ref) { + pci_write_config32(dev, 0xd4, cmd_ref ); + needs_reset = 1; /* Needed? */ + } + } + } + return needs_reset; +} + +static int optimize_link_read_pointers(unsigned nodes) +{ + unsigned node; + int needs_reset = 0; + for(node = 0; node < nodes; node++) { + device_t f0_dev, f3_dev; + uint32_t cmd_ref, cmd; + int link; + f0_dev = NODE_HT(node); + f3_dev = NODE_MC(node); + cmd_ref = cmd = pci_read_config32(f3_dev, 0xdc); + for(link = 0; link < 3; link++) { + uint32_t link_type; + unsigned reg; + /* This works on an Athlon64 because unimplemented links return 0 */ + reg = 0x98 + (link * 0x20); + link_type = pci_read_config32(f0_dev, reg); + /* Only handle coherent links */ + if ((link_type & (LinkConnected | InitComplete|NonCoherent)) == + (LinkConnected|InitComplete)) + { + cmd &= ~(0xff << (link *8)); + cmd |= 0x25 << (link *8); + } + } + if (cmd != cmd_ref) { + pci_write_config32(f3_dev, 0xdc, cmd); + needs_reset = 1; + } + } + return needs_reset; +} + +static int optimize_link_coherent_ht(void) +{ + int needs_reset = 0; + + unsigned nodes; + + nodes = get_nodes(); + +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + if(nodes>1) { + needs_reset |= optimize_connection( + NODE_HT(0), 0x80 + link_to_register(link_connection(0,1)), + NODE_HT(1), 0x80 + link_to_register(link_connection(1,0)) ); + } + +#if CONFIG_MAX_PHYSICAL_CPUS > 2 + if(nodes>2) { + /* optimize physical connections - by LYH */ + static const u8 opt_conn4[] = { + 0,2, + 1,3, + 2,3, + }; + needs_reset |= optimize_connection_group(opt_conn4, sizeof(opt_conn4)/sizeof(opt_conn4[0])); + } +#endif + +#if CONFIG_MAX_PHYSICAL_CPUS > 4 + if(nodes>4) { + static const uint8_t opt_conn6[] ={ + 2, 4, + 3, 5, + #if !CROSS_BAR_47_56 + 4, 5, + #endif + }; + needs_reset |= optimize_connection_group(opt_conn6, sizeof(opt_conn6)/sizeof(opt_conn6[0])); + } +#endif + +#if CONFIG_MAX_PHYSICAL_CPUS > 6 + if(nodes>6) { + static const uint8_t opt_conn8[] ={ + 4, 6, + #if CROSS_BAR_47_56 + 4, 7, + 5, 6, + #endif + 5, 7, + 6, 7, + }; + needs_reset |= optimize_connection_group(opt_conn8, sizeof(opt_conn8)/sizeof(opt_conn8[0])); + } +#endif + +#endif + + needs_reset |= apply_cpu_errata_fixes(nodes); + needs_reset |= optimize_link_read_pointers(nodes); + + return needs_reset; +} + +#if RAMINIT_SYSINFO == 1 +static void setup_coherent_ht_domain(void) +#else +static int setup_coherent_ht_domain(void) +#endif +{ + unsigned nodes; + nodes = 1; + + enable_bsp_routing(); + +#if CONFIG_MAX_PHYSICAL_CPUS > 1 + nodes = setup_smp(); + nodes = verify_mp_capabilities(nodes); + clear_dead_routes(nodes); +#endif + + if (nodes == 1) { + setup_uniprocessor(); + } + coherent_ht_finalize(nodes); + +#if RAMINIT_SYSINFO == 0 + return optimize_link_coherent_ht(); +#endif +} + diff --git a/src/northbridge/amd/amdk8/incoherent_ht.c b/src/northbridge/amd/amdk8/incoherent_ht.c index 2623935ab2..c04781f2c0 100644 --- a/src/northbridge/amd/amdk8/incoherent_ht.c +++ b/src/northbridge/amd/amdk8/incoherent_ht.c @@ -968,34 +968,4 @@ static int optimize_link_incoherent_ht(struct sys_info *sysinfo) #endif -static unsigned get_sblnk(void) -{ - uint32_t reg; - /* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */ - reg = pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64); - return ((reg>>8) & 3) ; -} - -/* Look up a which bus a given node/link combination is on. - * return 0 when we can't find the answer. - */ - -static unsigned node_link_to_bus(unsigned node, unsigned link) -{ - unsigned reg; - - for(reg = 0xE0; reg < 0xF0; reg += 0x04) { - unsigned config_map; - config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); - if ((config_map & 3) != 3) { - continue; - } - if ((((config_map >> 4) & 7) == node) && - (((config_map >> 8) & 3) == link)) - { - return (config_map >> 16) & 0xff; - } - } - return 0; -} diff --git a/src/northbridge/amd/amdk8/raminit.c b/src/northbridge/amd/amdk8/raminit.c index c6a649a883..2141b31843 100644 --- a/src/northbridge/amd/amdk8/raminit.c +++ b/src/northbridge/amd/amdk8/raminit.c @@ -18,6 +18,10 @@ #define K8_4RANK_DIMM_SUPPORT 0 #endif +#if USE_DCACHE_RAM == 1 +static void hard_reset(void); +#endif + #if 1 static void setup_resource_map(const unsigned int *register_values, int max) { diff --git a/src/northbridge/amd/amdk8/reset_test.c b/src/northbridge/amd/amdk8/reset_test.c index e60447c2ff..932b807b45 100644 --- a/src/northbridge/amd/amdk8/reset_test.c +++ b/src/northbridge/amd/amdk8/reset_test.c @@ -51,3 +51,37 @@ static void set_bios_reset(void) htic &= ~HTIC_BIOSR_Detect; pci_write_config32(PCI_DEV(0, 0x18, 0), HT_INIT_CONTROL, htic); } + +static unsigned node_link_to_bus(unsigned node, unsigned link) +{ + unsigned reg; + + for(reg = 0xE0; reg < 0xF0; reg += 0x04) { + unsigned config_map; + config_map = pci_read_config32(PCI_DEV(0, 0x18, 1), reg); + if ((config_map & 3) != 3) { + continue; + } + if ((((config_map >> 4) & 7) == node) && + (((config_map >> 8) & 3) == link)) + { + return (config_map >> 16) & 0xff; + } + } + return 0; +} + +static unsigned get_sblk(void) +{ + uint32_t reg; + /* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */ + reg = pci_read_config32(PCI_DEV(0, 0x18, 0), 0x64); + return ((reg>>8) & 3) ; +} + +static unsigned get_sbbusn(unsigned sblk) +{ + return node_link_to_bus(0, sblk); +} + + |