diff options
author | Yinghai Lu <yinghailu@gmail.com> | 2006-10-04 20:46:15 +0000 |
---|---|---|
committer | Yinghai Lu <yinghailu@gmail.com> | 2006-10-04 20:46:15 +0000 |
commit | d4b278c02c1da92219ebeb34204b9768934aeca3 (patch) | |
tree | 488d097cac9744cfc9b8ff7c89ce69bcb21370cb /src/northbridge/amd/amdk8/raminit_f.c | |
parent | 2e3757d11c565a8fe68dc2a2c34975e98304533c (diff) |
AMD Rev F support
git-svn-id: svn://svn.coreboot.org/coreboot/trunk@2435 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
Diffstat (limited to 'src/northbridge/amd/amdk8/raminit_f.c')
-rw-r--r-- | src/northbridge/amd/amdk8/raminit_f.c | 3065 |
1 files changed, 3065 insertions, 0 deletions
diff --git a/src/northbridge/amd/amdk8/raminit_f.c b/src/northbridge/amd/amdk8/raminit_f.c new file mode 100644 index 0000000000..3c8341050e --- /dev/null +++ b/src/northbridge/amd/amdk8/raminit_f.c @@ -0,0 +1,3065 @@ +/* This should be done by Eric + 2004.11 yhlu add 4 rank DIMM support + 2004.12 yhlu add D0 support + 2005.02 yhlu add E0 memory hole support + 2005.10 yhlu make it support DDR2 only +*/ + +#include <cpu/x86/mem.h> +#include <cpu/x86/cache.h> +#include <cpu/x86/mtrr.h> +#include <cpu/x86/tsc.h> + +#include "raminit.h" +#include "amdk8_f.h" +#include "spd_ddr2.h" + +#ifndef QRANK_DIMM_SUPPORT +#define QRANK_DIMM_SUPPORT 0 +#endif + +static inline void print_raminit(const char *strval, uint32_t val) +{ +#if CONFIG_USE_INIT + printk_debug("%s:%08x\r\n", strval, val); +#else + print_debug(strval); print_debug_hex32(val); print_debug("\r\n"); +#endif +} + +#define RAM_TIMING_DEBUG 0 + +static inline void print_tx(const char *strval, uint32_t val) +{ +#if RAM_TIMING_DEBUG == 1 + print_raminit(strval, val); +#endif +} + + +static inline void print_t(const char *strval) +{ +#if RAM_TIMING_DEBUG == 1 + print_debug(strval); +#endif +} + + + +#if (CONFIG_LB_MEM_TOPK & (CONFIG_LB_MEM_TOPK -1)) != 0 +# error "CONFIG_LB_MEM_TOPK must be a power of 2" +#endif + +#include "amdk8_f_pci.c" + + + // for PCI_ADDR(0, 0x18, 2, 0x98) index, and PCI_ADDR(0x, 0x18, 2, 0x9c) data + /* + index: + [29: 0] DctOffset (Dram Controller Offset) + [30:30] DctAccessWrite (Dram Controller Read/Write Select) + 0 = read access + 1 = write access + [31:31] DctAccessDone (Dram Controller Access Done) + 0 = Access in progress + 1 = No access is progress + + Data: + [31: 0] DctOffsetData (Dram Controller Offset Data) + + Read: + - Write the register num to DctOffset with DctAccessWrite = 0 + - poll the DctAccessDone until it = 1 + - Read the data from DctOffsetData + Write: + - Write the data to DctOffsetData + - Write register num to DctOffset with DctAccessWrite = 1 + - poll the DctAccessDone untio it = 1 + + */ + + +#if 1 +static void setup_resource_map(const unsigned int *register_values, int max) +{ + int i; + + for(i = 0; i < max; i += 3) { + device_t dev; + unsigned where; + unsigned long reg; + + dev = register_values[i] & ~0xff; + where = register_values[i] & 0xff; + reg = pci_read_config32(dev, where); + reg &= register_values[i+1]; + reg |= register_values[i+2]; + pci_write_config32(dev, where, reg); + } +} +#endif + +static int controller_present(const struct mem_controller *ctrl) +{ + return pci_read_config32(ctrl->f0, 0) == 0x11001022; +} + +static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_info *sysinfo) +{ + static const unsigned int register_values[] = { + + /* Careful set limit registers before base registers which contain the enables */ + /* DRAM Limit i Registers + * F1:0x44 i = 0 + * F1:0x4C i = 1 + * F1:0x54 i = 2 + * F1:0x5C i = 3 + * F1:0x64 i = 4 + * F1:0x6C i = 5 + * F1:0x74 i = 6 + * F1:0x7C i = 7 + * [ 2: 0] Destination Node ID + * 000 = Node 0 + * 001 = Node 1 + * 010 = Node 2 + * 011 = Node 3 + * 100 = Node 4 + * 101 = Node 5 + * 110 = Node 6 + * 111 = Node 7 + * [ 7: 3] Reserved + * [10: 8] Interleave select + * specifies the values of A[14:12] to use with interleave enable. + * [15:11] Reserved + * [31:16] DRAM Limit Address i Bits 39-24 + * This field defines the upper address bits of a 40 bit address + * that define the end of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001, + PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002, + PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003, + PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004, + PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005, + PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006, + PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007, + /* DRAM Base i Registers + * F1:0x40 i = 0 + * F1:0x48 i = 1 + * F1:0x50 i = 2 + * F1:0x58 i = 3 + * F1:0x60 i = 4 + * F1:0x68 i = 5 + * F1:0x70 i = 6 + * F1:0x78 i = 7 + * [ 0: 0] Read Enable + * 0 = Reads Disabled + * 1 = Reads Enabled + * [ 1: 1] Write Enable + * 0 = Writes Disabled + * 1 = Writes Enabled + * [ 7: 2] Reserved + * [10: 8] Interleave Enable + * 000 = No interleave + * 001 = Interleave on A[12] (2 nodes) + * 010 = reserved + * 011 = Interleave on A[12] and A[14] (4 nodes) + * 100 = reserved + * 101 = reserved + * 110 = reserved + * 111 = Interleve on A[12] and A[13] and A[14] (8 nodes) + * [15:11] Reserved + * [13:16] DRAM Base Address i Bits 39-24 + * This field defines the upper address bits of a 40-bit address + * that define the start of the DRAM region. + */ + PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000, + PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000, + + /* DRAM CS Base Address i Registers + * F2:0x40 i = 0 + * F2:0x44 i = 1 + * F2:0x48 i = 2 + * F2:0x4C i = 3 + * F2:0x50 i = 4 + * F2:0x54 i = 5 + * F2:0x58 i = 6 + * F2:0x5C i = 7 + * [ 0: 0] Chip-Select Bank Enable + * 0 = Bank Disabled + * 1 = Bank Enabled + * [ 1: 1] Spare Rank + * [ 2: 2] Memory Test Failed + * [ 4: 3] Reserved + * [13: 5] Base Address (21-13) + * An optimization used when all DIMM are the same size... + * [18:14] Reserved + * [28:19] Base Address (36-27) + * This field defines the top 11 addresses bit of a 40-bit + * address that define the memory address space. These + * bits decode 32-MByte blocks of memory. + * [31:29] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x40), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x44), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x48), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x4C), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x50), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x54), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x58), 0xe007c018, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x5C), 0xe007c018, 0x00000000, + /* DRAM CS Mask Address i Registers + * F2:0x60 i = 0,1 + * F2:0x64 i = 2,3 + * F2:0x68 i = 4,5 + * F2:0x6C i = 6,7 + * Select bits to exclude from comparison with the DRAM Base address register. + * [ 4: 0] Reserved + * [13: 5] Address Mask (21-13) + * Address to be excluded from the optimized case + * [18:14] Reserved + * [28:19] Address Mask (36-27) + * The bits with an address mask of 1 are excluded from address comparison + * [31:29] Reserved + * + */ + PCI_ADDR(0, 0x18, 2, 0x60), 0xe007c01f, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x64), 0xe007c01f, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x68), 0xe007c01f, 0x00000000, + PCI_ADDR(0, 0x18, 2, 0x6C), 0xe007c01f, 0x00000000, + + /* DRAM Control Register + * F2:0x78 + * [ 3: 0] RdPtrInit ( Read Pointer Initial Value) + * 0x03-0x00: reserved + * [ 6: 4] RdPadRcvFifoDly (Read Delay from Pad Receive FIFO) + * 000 = reserved + * 001 = reserved + * 010 = 1.5 Memory Clocks + * 011 = 2 Memory Clocks + * 100 = 2.5 Memory Clocks + * 101 = 3 Memory Clocks + * 110 = 3.5 Memory Clocks + * 111 = Reseved + * [15: 7] Reserved + * [16:16] AltVidC3MemClkTriEn (AltVID Memory Clock Tristate Enable) + * Enables the DDR memory clocks to be tristated when alternate VID mode is enabled. This bit has no effect if the DisNbClkRamp bit (F3, 0x88) is set + * [17:17] DllTempAdjTime (DLL Temperature Adjust Cycle Time) + * 0 = 5 ms + * 1 = 1 ms + * [18:18] DqsRcvEnTrain (DQS Receiver Enable Training Mode) + * 0 = Normal DQS Receiver enable operation + * 1 = DQS receiver enable training mode + * [31:19] reverved + */ + PCI_ADDR(0, 0x18, 2, 0x78), 0xfff80000, (6<<4)|(6<<0), + + /* DRAM Initialization Register + * F2:0x7C + * [15: 0] MrsAddress (Address for MRS/EMRS Commands) + * this field specifies the dsata driven on the DRAM address pins 15-0 for MRS and EMRS commands + * [18:16] MrsBank (Bank Address for MRS/EMRS Commands) + * this files specifies the data driven on the DRAM bank pins for the MRS and EMRS commands + * [23:19] reverved + * [24:24] SendPchgAll (Send Precharge All Command) + * Setting this bit causes the DRAM controller to send a precharge all command. This bit is cleared by the hardware after the command completes + * [25:25] SendAutoRefresh (Send Auto Refresh Command) + * Setting this bit causes the DRAM controller to send an auto refresh command. This bit is cleared by the hardware after the command completes + * [26:26] SendMrsCmd (Send MRS/EMRS Command) + * Setting this bit causes the DRAM controller to send the MRS or EMRS command defined by the MrsAddress and MrsBank fields. This bit is cleared by the hardware adter the commmand completes + * [27:27] DeassertMemRstX (De-assert Memory Reset) + * Setting this bit causes the DRAM controller to de-assert the memory reset pin. This bit cannot be used to assert the memory reset pin + * [28:28] AssertCke (Assert CKE) + * setting this bit causes the DRAM controller to assert the CKE pins. This bit cannot be used to de-assert the CKE pins + * [30:29] reverved + * [31:31] EnDramInit (Enable DRAM Initialization) + * Setting this bit puts the DRAM controller in a BIOS controlled DRAM initialization mode. BIOS must clear this bit aster DRAM initialization is complete. + */ +// PCI_ADDR(0, 0x18, 2, 0x7C), 0x60f80000, 0, + + + /* DRAM Bank Address Mapping Register + * F2:0x80 + * Specify the memory module size + * [ 3: 0] CS1/0 + * [ 7: 4] CS3/2 + * [11: 8] CS5/4 + * [15:12] CS7/6 + * [31:16] + row col bank + 0: 13 9 2 :128M + 1: 13 10 2 :256M + 2: 14 10 2 :512M + 3: 13 11 2 :512M + 4: 13 10 3 :512M + 5: 14 10 3 :1G + 6: 14 11 2 :1G + 7: 15 10 3 :2G + 8: 14 11 3 :2G + 9: 15 11 3 :4G + 10: 16 10 3 :4G + 11: 16 11 3 :8G + */ + PCI_ADDR(0, 0x18, 2, 0x80), 0xffff0000, 0x00000000, + /* DRAM Timing Low Register + * F2:0x88 + * [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid) + * 000 = reserved + * 001 = reserved + * 010 = CL 3 + * 011 = CL 4 + * 100 = CL 5 + * 101 = CL 6 + * 110 = reserved + * 111 = reserved + * [ 3: 3] Reserved + * [ 5: 4] Trcd (Ras#-active to Cas# read/write delay) + * 00 = 3 clocks + * 01 = 4 clocks + * 10 = 5 clocks + * 11 = 6 clocks + * [ 7: 6] Reserved + * [ 9: 8] Trp (Row Precharge Time, Precharge-to-Active or Auto-Refresh) + * 00 = 3 clocks + * 01 = 4 clocks + * 10 = 5 clocks + * 11 = 6 clocks + * [10:10] Reserved + * [11:11] Trtp (Read to Precharge Time, read Cas# to precharge time) + * 0 = 2 clocks for Burst Length of 32 Bytes + * 4 clocks for Burst Length of 64 Bytes + * 1 = 3 clocks for Burst Length of 32 Bytes + * 5 clocks for Burst Length of 64 Bytes + * [15:12] Tras (Minimum Ras# Active Time) + * 0000 = reserved + * 0001 = reserved + * 0010 = 5 bus clocks + * ... + * 1111 = 18 bus clocks + * [19:16] Trc (Row Cycle Time, Ras#-active to Ras#-active or auto refresh of the same bank) + * 0000 = 11 bus clocks + * 0010 = 12 bus clocks + * ... + * 1110 = 25 bus clocks + * 1111 = 26 bus clocks + * [21:20] Twr (Write Recovery Time, From the last data to precharge, writes can go back-to-back) + * 00 = 3 bus clocks + * 01 = 4 bus clocks + * 10 = 5 bus clocks + * 11 = 6 bus clocks + * [23:22] Trrd (Active-to-active (Ras#-to-Ras#) Delay of different banks) + * 00 = 2 bus clocks + * 01 = 3 bus clocks + * 10 = 4 bus clocks + * 11 = 5 bus clocks + * [31:24] MemClkDis ( Disable the MEMCLK outputs for DRAM channel A, BIOS should set it to reduce the power consumption) + * Bit F(1207) M2 Package S1g1 Package + * 0 N/A MA1_CLK1 N/A + * 1 N/A MA0_CLK1 MA0_CLK1 + * 2 MA3_CLK N/A N/A + * 3 MA2_CLK N/A N/A + * 4 MA1_CLK MA1_CLK0 N/A + * 5 MA0_CLK MA0_CLK0 MA0_CLK0 + * 6 N/A MA1_CLK2 N/A + * 7 N/A MA0_CLK2 MA0_CLK2 + */ + PCI_ADDR(0, 0x18, 2, 0x88), 0x000004c8, 0xff000002 /* 0x03623125 */ , + /* DRAM Timing High Register + * F2:0x8C + * [ 3: 0] Reserved + * [ 6: 4] TrwtTO (Read-to-Write Turnaround for Data, DQS Contention) + * 000 = 2 bus clocks + * 001 = 3 bus clocks + * 010 = 4 bus clocks + * 011 = 5 bus clocks + * 100 = 6 bus clocks + * 101 = 7 bus clocks + * 110 = 8 bus clocks + * 111 = 9 bus clocks + * [ 7: 7] Reserved + * [ 9: 8] Twtr (Internal DRAM Write-to-Read Command Delay, minium write-to-read delay when both access the same chip select) + * 00 = Reserved + * 01 = 1 bus clocks + * 10 = 2 bus clocks + * 11 = 3 bus clocks + * [11:10] Twrrd (Write to Read DIMM Termination Turnaround, minimum write-to-read delay when accessing two different DIMMs) + * 00 = 0 bus clocks + * 01 = 1 bus clocks + * 10 = 2 bus clocks + * 11 = 3 bus clocks + * [13:12] Twrwr (Write to Write Timing) + * 00 = 1 bus clocks ( 0 idle cycle on the bus) + * 01 = 2 bus clocks ( 1 idle cycle on the bus) + * 10 = 3 bus clocks ( 2 idle cycles on the bus) + * 11 = Reserved + * [15:14] Trdrd ( Read to Read Timing) + * 00 = 2 bus clocks ( 1 idle cycle on the bus) + * 01 = 3 bus clocks ( 2 idle cycles on the bus) + * 10 = 4 bus clocks ( 3 idle cycles on the bus) + * 11 = 5 bus clocks ( 4 idel cycles on the bus) + * [17:16] Tref (Refresh Rate) + * 00 = Undefined behavior + * 01 = Reserved + * 10 = Refresh interval of 7.8 microseconds + * 11 = Refresh interval of 3.9 microseconds + * [19:18] Reserved + * [22:20] Trfc0 ( Auto-Refresh Row Cycle Time for the Logical DIMM0, based on DRAM density and speed) + * 000 = 75 ns (all speeds, 256Mbit) + * 001 = 105 ns (all speeds, 512Mbit) + * 010 = 127.5 ns (all speeds, 1Gbit) + * 011 = 195 ns (all speeds, 2Gbit) + * 100 = 327.5 ns (all speeds, 4Gbit) + * 101 = reserved + * 110 = reserved + * 111 = reserved + * [25:23] Trfc1 ( Auto-Refresh Row Cycle Time for the Logical DIMM1, based on DRAM density and speed) + * [28:26] Trfc2 ( Auto-Refresh Row Cycle Time for the Logical DIMM2, based on DRAM density and speed) + * [31:29] Trfc3 ( Auto-Refresh Row Cycle Time for the Logical DIMM3, based on DRAM density and speed) + */ + PCI_ADDR(0, 0x18, 2, 0x8c), 0x000c008f, (2 << 16)|(1 << 8), + /* DRAM Config Low Register + * F2:0x90 + * [ 0: 0] InitDram (Initialize DRAM) + * 1 = write 1 cause DRAM controller to execute the DRAM initialization, when done it read to 0 + * [ 1: 1] ExitSelfRef ( Exit Self Refresh Command ) + * 1 = write 1 causes the DRAM controller to bring the DRAMs out fo self refresh mode + * [ 3: 2] Reserved + * [ 5: 4] DramTerm (DRAM Termination) + * 00 = On die termination disabled + * 01 = 75 ohms + * 10 = 150 ohms + * 11 = 50 ohms + * [ 6: 6] Reserved + * [ 7: 7] DramDrvWeak ( DRAM Drivers Weak Mode) + * 0 = Normal drive strength mode. + * 1 = Weak drive strength mode + * [ 8: 8] ParEn (Parity Enable) + * 1 = Enable address parity computation output, PAR, and enables the parity error input, ERR + * [ 9: 9] SelfRefRateEn (Faster Self Refresh Rate Enable) + * 1 = Enable high temperature ( two times normal ) self refresh rate + * [10:10] BurstLength32 ( DRAM Burst Length Set for 32 Bytes) + * 0 = 64-byte mode + * 1 = 32-byte mode + * [11:11] Width128 ( Width of DRAM interface) + * 0 = the controller DRAM interface is 64-bits wide + * 1 = the controller DRAM interface is 128-bits wide + * [12:12] X4Dimm (DIMM 0 is x4) + * [13:13] X4Dimm (DIMM 1 is x4) + * [14:14] X4Dimm (DIMM 2 is x4) + * [15:15] X4Dimm (DIMM 3 is x4) + * 0 = DIMM is not x4 + * 1 = x4 DIMM present + * [16:16] UnBuffDimm ( Unbuffered DIMMs) + * 0 = Buffered DIMMs + * 1 = Unbuffered DIMMs + * [18:17] Reserved + * [19:19] DimmEccEn ( DIMM ECC Enable ) + 1 = ECC checking is being enabled for all DIMMs on the DRAM controller ( Through F3 0x44[EccEn]) + * [31:20] Reserved + */ + PCI_ADDR(0, 0x18, 2, 0x90), 0xfff6004c, 0x00000010, + /* DRAM Config High Register + * F2:0x94 + * [ 0: 2] MemClkFreq ( Memory Clock Frequency) + * 000 = 200MHz + * 001 = 266MHz + * 010 = 333MHz + * 011 = reserved + * 1xx = reserved + * [ 3: 3] MemClkFreqVal (Memory Clock Freqency Valid) + * 1 = BIOS need to set the bit when setting up MemClkFreq to the proper value + * [ 7: 4] MaxAsyncLat ( Maximum Asynchronous Latency) + * 0000 = 0 ns + * ... + * 1111 = 15 ns + * [11: 8] Reserved + * [12:12] RDqsEn ( Read DQS Enable) This bit is only be set if x8 registered DIMMs are present in the system + * 0 = DM pins function as data mask pins + * 1 = DM pins function as read DQS pins + * [13:13] Reserved + * [14:14] DisDramInterface ( Disable the DRAM interface ) When this bit is set, the DRAM controller is disabled, and interface in low power state + * 0 = Enabled (default) + * 1 = Disabled + * [15:15] PowerDownEn ( Power Down Mode Enable ) + * 0 = Disabled (default) + * 1 = Enabled + * [16:16] PowerDown ( Power Down Mode ) + * 0 = Channel CKE Control + * 1 = Chip Select CKE Control + * [17:17] FourRankSODimm (Four Rank SO-DIMM) + * 1 = this bit is set by BIOS to indicate that a four rank SO-DIMM is present + * [18:18] FourRankRDimm (Four Rank Registered DIMM) + * 1 = this bit is set by BIOS to indicate that a four rank registered DIMM is present + * [19:19] Reserved + * [20:20] SlowAccessMode (Slow Access Mode (2T Mode)) + * 0 = DRAM address and control signals are driven for one MEMCLK cycle + * 1 = One additional MEMCLK of setup time is provided on all DRAM address and control signals except CS, CKE, and ODT; i.e., these signals are drivern for two MEMCLK cycles rather than one + * [21:21] Reserved + * [22:22] BankSwizzleMode ( Bank Swizzle Mode), + * 0 = Disabled (default) + * 1 = Enabled + * [23:23] Reserved + * [27:24] DcqBypassMax ( DRAM Controller Queue Bypass Maximum) + * 0000 = No bypass; the oldest request is never bypassed + * 0001 = The oldest request may be bypassed no more than 1 time + * ... + * 1111 = The oldest request may be bypassed no more than 15 times + * [31:28] FourActWindow ( Four Bank Activate Window) , not more than 4 banks in a 8 bank device are activated + * 0000 = No tFAW window restriction + * 0001 = 8 MEMCLK cycles + * 0010 = 9 MEMCLK cycles + * ... + * 1101 = 20 MEMCLK cycles + * 111x = reserved + */ + PCI_ADDR(0, 0x18, 2, 0x94), 0x00a82f00,0x00008000, + /* DRAM Delay Line Register + * F2:0xa0 + * [ 0: 0] MemClrStatus (Memory Clear Status) : ---------Readonly + * when set, this bit indicates that the memory clear function is complete. Only clear by reset. BIOS should not write or read the DRAM until this bit is set by hardware + * [ 1: 1] DisableJitter ( Disable Jitter) + * When set the DDR compensation circuit will not change the values unless the change is more than one step from the current value + * [ 3: 2] RdWrQByp ( Read/Write Queue Bypass Count) + * 00 = 2 + * 01 = 4 + * 10 = 8 + * 11 = 16 + * [ 4: 4] Mode64BitMux (Mismatched DIMM Support Enable) + * 1 When bit enables support for mismatched DIMMs when using 128-bit DRAM interface, the Width128 no effect, only for M2 and s1g1 + * [ 5: 5] DCC_EN ( Dynamica Idle Cycle Counter Enable) + * When set to 1, indicates that each entry in the page tables dynamically adjusts the idle cycle limit based on page Conflict/Page Miss (PC/PM) traffic + * [ 8: 6] ILD_lmt ( Idle Cycle Limit) + * 000 = 0 cycles + * 001 = 4 cycles + * 010 = 8 cycles + * 011 = 16 cycles + * 100 = 32 cycles + * 101 = 64 cycles + * 110 = 128 cycles + * 111 = 256 cycles + * [ 9: 9] DramEnabled ( DRAM Enabled) + * When Set, this bit indicates that the DRAM is enabled, this bit is set by hardware after DRAM initialization or on an exit from self refresh. The DRAM controller is intialized after the + * hardware-controlled initialization process ( initiated by the F2 0x90[DramInit]) completes or when the BIOS-controlled initialization process completes (F2 0x7c(EnDramInit] is + * written from 1 to 0) + * [23:10] Reserved + * [31:24] MemClkDis ( Disable the MEMCLK outputs for DRAM channel B, BIOS should set it to reduce the power consumption) + * Bit F(1207) M2 Package S1g1 Package + * 0 N/A MA1_CLK1 N/A + * 1 N/A MA0_CLK1 MA0_CLK1 + * 2 MA3_CLK N/A N/A + * 3 MA2_CLK N/A N/A + * 4 MA1_CLK MA1_CLK0 N/A + * 5 MA0_CLK MA0_CLK0 MA0_CLK0 + * 6 N/A MA1_CLK2 N/A + * 7 N/A MA0_CLK2 MA0_CLK2 + */ + PCI_ADDR(0, 0x18, 2, 0xa0), 0x00fffc00, 0xff000000, + + /* DRAM Scrub Control Register + * F3:0x58 + * [ 4: 0] DRAM Scrube Rate + * [ 7: 5] reserved + * [12: 8] L2 Scrub Rate + * [15:13] reserved + * [20:16] Dcache Scrub + * [31:21] reserved + * Scrub Rates + * 00000 = Do not scrub + * 00001 = 40.00 ns + * 00010 = 80.00 ns + * 00011 = 160.00 ns + * 00100 = 320.00 ns + * 00101 = 640.00 ns + * 00110 = 1.28 us + * 00111 = 2.56 us + * 01000 = 5.12 us + * 01001 = 10.20 us + * 01011 = 41.00 us + * 01100 = 81.90 us + * 01101 = 163.80 us + * 01110 = 327.70 us + * 01111 = 655.40 us + * 10000 = 1.31 ms + * 10001 = 2.62 ms + * 10010 = 5.24 ms + * 10011 = 10.49 ms + * 10100 = 20.97 ms + * 10101 = 42.00 ms + * 10110 = 84.00 ms + * All Others = Reserved + */ + PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000, + /* DRAM Scrub Address Low Register + * F3:0x5C + * [ 0: 0] DRAM Scrubber Redirect Enable + * 0 = Do nothing + * 1 = Scrubber Corrects errors found in normal operation + * [ 5: 1] Reserved + * [31: 6] DRAM Scrub Address 31-6 + */ + PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000, + /* DRAM Scrub Address High Register + * F3:0x60 + * [ 7: 0] DRAM Scrubb Address 39-32 + * [31: 8] Reserved + */ + PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000, + }; + // for PCI_ADDR(0, 0x18, 2, 0x98) index, and PCI_ADDR(0x, 0x18, 2, 0x9c) data + /* + index: + [29: 0] DctOffset (Dram Controller Offset) + [30:30] DctAccessWrite (Dram Controller Read/Write Select) + 0 = read access + 1 = write access + [31:31] DctAccessDone (Dram Controller Access Done) + 0 = Access in progress + 1 = No access is progress + + Data: + [31: 0] DctOffsetData (Dram Controller Offset Data) + + Read: + - Write the register num to DctOffset with DctAccessWrite = 0 + - poll the DctAccessDone until it = 1 + - Read the data from DctOffsetData + Write: + - Write the data to DctOffsetData + - Write register num to DctOffset with DctAccessWrite = 1 + - poll the DctAccessDone untio it = 1 + + */ +#if 0 + static const unsigned int index_register_values[] = { + /* Output Driver Compensation Control Register + * Index: 0x00 + * [ 1: 0] CkeDrvStren (CKE Drive Strength) + * 00 = 1.0x + * 01 = 1.25x + * 10 = 1.5x (Default) + * 11 = 2.0x + * [ 3: 2] reserved + * [ 5: 4] CsOdtDrvStren (CS/ODT Drive Strength) + * 00 = 1.0x + * 01 = 1.25x + * 10 = 1.5x (Default) + * 11 = 2.0x + * [ 7: 6] reserved + * [ 9: 8] AddrCmdDrvStren (Address/Command Drive Strength) + * 00 = 1.0x + * 01 = 1.25x + * 10 = 1.5x (Default) + * 11 = 2.0x + * [11:10] reserved + * [13:12] ClkDrvStren (MEMCLK Drive Strength) + * 00 = 0.75x + * 01 = 1.0x Default) + * 10 = 1.25x + * 11 = 1.5x + * [15:14] reserved + * [17:16] DataDrvStren (Data Drive Strength) + * 00 = 0.75x + * 01 = 1.0x Default) + * 10 = 1.25x + * 11 = 1.5x + * [19:18] reserved + * [21:20] DqsDrvStren (DQS Drive Strength) + * 00 = 0.75x + * 01 = 1.0x Default) + * 10 = 1.25x + * 11 = 1.5x + * [27:22] reserved + * [29:28] ProcOdt ( Processor On-die Termination) + * 00 = 300 ohms +/- 20% + * 01 = 150 ohms +/- 20% + * 10 = 75 ohms +/- 20% + * 11 = reserved + * [31:30] reserved + */ + 0x00, 0xcfcccccc, 0x00000000, + 0x20, 0xcfcccccc, 0x00000000, + /* Write Data Timing Low Control Register + * Index 0x01 + * [ 5: 0] WrDatTimeByte0 (Write Data Byte 0 Timing Control) + * 000000 = no delay + * 000001 = 1/96 MEMCLK delay + * 000010 = 2/96 MEMCLK delay + * ... + * 101111 = 47/96 MEMCLK delay + * 11xxxx = reserved + * [ 7: 6] reserved + * [13: 8] WrDatTimeByte1 (Write Data Byte 1 Timing Control) + * [15:14] reserved + * [21:16] WrDatTimeByte2 (Write Data Byte 2 Timing Control) + * [23:22] reserved + * [29:24] WrDatTimeByte3 (Write Data Byte 3 Timing Control) + * [31:30] reserved + */ + 0x01, 0xc0c0c0c0, 0x00000000, + 0x21, 0xc0c0c0c0, 0x00000000, + /* Write Data Timing High Control Register + * Index 0x02 + * [ 5: 0] WrDatTimeByte4 (Write Data Byte 4 Timing Control) + * [ 7: 6] reserved + * [13: 8] WrDatTimeByte5 (Write Data Byte 5 Timing Control) + * [15:14] reserved + * [21:16] WrDatTimeByte6 (Write Data Byte 6 Timing Control) + * [23:22] reserved + * [29:24] WrDatTimeByte7 (Write Data Byte 7 Timing Control) + * [31:30] reserved + */ + 0x02, 0xc0c0c0c0, 0x00000000, + 0x22, 0xc0c0c0c0, 0x00000000, + + /* Write Data ECC Timing Control Register + * Index 0x03 + * [ 5: 0] WrChkTime (Write Data ECC Timing Control) + * 000000 = no delay + * 000001 = 1/96 MEMCLK delay + * 000010 = 2/96 MEMCLK delay + * ... + * 101111 = 47/96 MEMCLK delay + * 11xxxx = reserved + * [31: 6] reserved + */ + 0x03, 0x000000c0, 0x00000000, + 0x23, 0x000000c0, 0x00000000, + + /* Address Timing Control Register + * Index 0x04 + * [ 4: 0] CkeFineDelay (CKE Fine Delay) + * 00000 = no delay + * 00001 = 1/64 MEMCLK delay + * 00010 = 2/64 MEMCLK delay + * ... + * 11111 = 31/64 MEMCLK delay + * [ 5: 5] CkeSetup (CKE Setup Time) + * 0 = 1/2 MEMCLK + * 1 = 1 MEMCLK + * [ 7: 6] reserved + * [12: 8] CsOdtFineDelay (CS/ODT Fine Delay) + * 00000 = no delay + * 00001 = 1/64 MEMCLK delay + * 00010 = 2/64 MEMCLK delay + * ... + * 11111 = 31/64 MEMCLK delay + * [13:13] CsOdtSetup (CS/ODT Setup Time) + * 0 = 1/2 MEMCLK + * 1 = 1 MEMCLK + * [15:14] reserved + * [20:16] AddrCmdFineDelay (Address/Command Fine Delay) + * 00000 = no delay + * 00001 = 1/64 MEMCLK delay + * 00010 = 2/64 MEMCLK delay + * ... + * 11111 = 31/64 MEMCLK delay + * [21:21] AddrCmdSetup (Address/Command Setup Time) + * 0 = 1/2 MEMCLK + * 1 = 1 MEMCLK + * [31:22] reserved + */ + 0x04, 0xffc0c0c0, 0x00000000, + 0x24, 0xffc0c0c0, 0x00000000, + + /* Read DQS Timing Low Control Register + * Index 0x05 + * [ 5: 0] RdDqsTimeByte0 (Read DQS Byte 0 Timing Control) + * 000000 = no delay + * 000001 = 1/96 MEMCLK delay + * 000010 = 2/96 MEMCLK delay + * ... + * 101111 = 47/96 MEMCLK delay + * 11xxxx = reserved + * [ 7: 6] reserved + * [13: 8] RdDqsTimeByte1 (Read DQS Byte 1 Timing Control) + * [15:14] reserved + * [21:16] RdDqsTimeByte2 (Read DQS Byte 2 Timing Control) + * [23:22] reserved + * [29:24] RdDqsTimeByte3 (Read DQS Byte 3 Timing Control) + * [31:30] reserved + */ + 0x05, 0xc0c0c0c0, 0x00000000, + 0x25, 0xc0c0c0c0, 0x00000000, + + /* Read DQS Timing High Control Register + * Index 0x06 + * [ 5: 0] RdDqsTimeByte4 (Read DQS Byte 4 Timing Control) + * [ 7: 6] reserved + * [13: 8] RdDqsTimeByte5 (Read DQS Byte 5 Timing Control) + * [15:14] reserved + * [21:16] RdDqsTimeByte6 (Read DQS Byte 6 Timing Control) + * [23:22] reserved + * [29:24] RdDqsTimeByte7 (Read DQS Byte 7 Timing Control) + * [31:30] reserved + */ + 0x06, 0xc0c0c0c0, 0x00000000, + 0x26, 0xc0c0c0c0, 0x00000000, + + /* Read DQS ECC Timing Control Register + * Index 0x07 + * [ 5: 0] RdDqsTimeCheck (Read DQS ECC Timing Control) + * 000000 = no delay + * 000001 = 1/96 MEMCLK delay + * 000010 = 2/96 MEMCLK delay + * ... + * 101111 = 47/96 MEMCLK delay + * 11xxxx = reserved + * [31: 6] reserved + */ + 0x07, 0x000000c0, 0x00000000, + 0x27, 0x000000c0, 0x00000000, + + /* DQS Receiver Enable Timing Control Register + * Index 0x10, 0x13, 0x16, 0x19, + * [ 7: 0] Dqs RcvEnDelay (DQS Receiver Enable Delay) + * 0x00 = 0 ps + * 0x01 = 50 ps + * 0x02 = 100 ps + * ... + * 0xae = 8.7 ns + * 0xaf-0xff = reserved + * [31: 6] reserved + */ + 0x10, 0x000000ff, 0x00000000, + 0x13, 0x000000ff, 0x00000000, + 0x16, 0x000000ff, 0x00000000, + 0x19, 0x000000ff, 0x00000000, + 0x30, 0x000000ff, 0x00000000, + 0x33, 0x000000ff, 0x00000000, + 0x36, 0x000000ff, 0x00000000, + 0x39, 0x000000ff, 0x00000000, + }; +#endif + + int i; + int max; + +#if 1 + if (!controller_present(ctrl)) { +// print_debug("No memory controller present\r\n"); + sysinfo->ctrl_present[ctrl->node_id] = 0; + return; + } +#endif + sysinfo->ctrl_present[ctrl->node_id] = 1; + + print_spew("setting up CPU"); + print_spew_hex8(ctrl->node_id); + print_spew(" northbridge registers\r\n"); + max = sizeof(register_values)/sizeof(register_values[0]); + for(i = 0; i < max; i += 3) { + device_t dev; + unsigned where; + unsigned long reg; + dev = (register_values[i] & ~0xff) - PCI_DEV(0, 0x18, 0) + ctrl->f0; + where = register_values[i] & 0xff; + reg = pci_read_config32(dev, where); + reg &= register_values[i+1]; + reg |= register_values[i+2]; + pci_write_config32(dev, where, reg); + } + +#if 0 + // for index regs + max = sizeof(index_register_values)/sizeof(index_register_values[0]); + for(i = 0; i < max; i += 3) { + unsigned long reg; + unsigned index; + index = register_values[i]; + reg = pci_read_config32_index_wait(ctrl->f2, DRAM_CTRL_ADDI_DATA_OFFSET, index); + reg &= register_values[i+1]; + reg |= register_values[i+2]; + pci_write_config32_index_wait(ctrl->f2, DRAM_CTRL_ADDI_DATA_OFFSET, index, reg); + } +#endif + + print_spew("done.\r\n"); +} + +static int is_dual_channel(const struct mem_controller *ctrl) +{ + uint32_t dcl; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + return dcl & DCL_Width128; +} + +static int is_registered(const struct mem_controller *ctrl) +{ + /* Test to see if we are dealing with registered SDRAM. + * If we are not registered we are unbuffered. + * This function must be called after spd_handle_unbuffered_dimms. + */ + uint32_t dcl; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + return !(dcl & DCL_UnBuffDimm); +} + +static void spd_get_dimm_size(unsigned device, struct dimm_size *sz) +{ + /* Calculate the log base 2 size of a DIMM in bits */ + int value; + sz->per_rank = 0; + sz->rows = 0; + sz->col = 0; + sz->rank = 0; + + value = spd_read_byte(device, SPD_ROW_NUM); /* rows */ + if (value < 0) goto hw_err; + if ((value & 0xff) == 0) goto val_err; // max is 16 ? + sz->per_rank += value & 0xff; + sz->rows = value & 0xff; + + value = spd_read_byte(device, SPD_COL_NUM); /* columns */ + if (value < 0) goto hw_err; + if ((value & 0xff) == 0) goto val_err; //max is 11 + sz->per_rank += value & 0xff; + sz->col = value & 0xff; + + value = spd_read_byte(device, SPD_BANK_NUM); /* banks */ + if (value < 0) goto hw_err; + if ((value & 0xff) == 0) goto val_err; + sz->bank = log2(value & 0xff); // convert 4 to 2, and 8 to 3 + sz->per_rank += sz->bank; + + /* Get the module data width and convert it to a power of two */ + value = spd_read_byte(device, SPD_DATA_WIDTH); + if (value < 0) goto hw_err; + value &= 0xff; + if ((value != 72) && (value != 64)) goto val_err; + sz->per_rank += log2(value) - 3; //64 bit So another 3 lines + + /* How many ranks? */ + value = spd_read_byte(device, SPD_MOD_ATTRIB_RANK); /* number of physical banks */ + if (value < 0) goto hw_err; +// value >>= SPD_MOD_ATTRIB_RANK_NUM_SHIFT; + value &= SPD_MOD_ATTRIB_RANK_NUM_MASK; + value += SPD_MOD_ATTRIB_RANK_NUM_BASE; // 0-->1, 1-->2, 3-->4 + /* + rank == 1 only one rank or say one side + rank == 2 two side , and two ranks + rank == 4 two side , and four ranks total + Some one side two ranks, because of stacked + */ + if ((value != 1) && (value != 2) && (value != 4 )) { + goto val_err; + } + sz->rank = value; + + /* verify if per_rank is equal byte 31 + it has the DIMM size as a multiple of 128MB. + */ + value = spd_read_byte(device, SPD_RANK_SIZE); + if (value < 0) goto hw_err; + value &= 0xff; + value = log2(value); + if(value <=4 ) value += 8; // add back to 1G to high + value += (27-5); // make 128MB to the real lines + if( value != (sz->per_rank)) { + print_err("Bad RANK Size --\r\n"); + goto val_err; + } + + goto out; + + val_err: + die("Bad SPD value\r\n"); + /* If an hw_error occurs report that I have no memory */ +hw_err: + sz->per_rank = 0; + sz->rows = 0; + sz->col = 0; + sz->bank = 0; + sz->rank = 0; + out: + return; +} + +static void set_dimm_size(const struct mem_controller *ctrl, struct dimm_size *sz, unsigned index, int is_Width128) +{ + uint32_t base0, base1; + + + /* For each base register. + * Place the dimm size in 32 MB quantities in the bits 31 - 21. + * The initialize dimm size is in bits. + * Set the base enable bit0. + */ + + base0 = base1 = 0; + + /* Make certain side1 of the dimm is at least 128MB */ + if (sz->per_rank >= 27) { + base0 = (1 << ((sz->per_rank - 27 ) + 19)) | 1; + } + + /* Make certain side2 of the dimm is at least 128MB */ + if (sz->rank > 1) { // 2 ranks or 4 ranks + base1 = (1 << ((sz->per_rank - 27 ) + 19)) | 1; + } + + /* Double the size if we are using dual channel memory */ + if (is_Width128) { + base0 = (base0 << 1) | (base0 & 1); + base1 = (base1 << 1) | (base1 & 1); + } + + /* Clear the reserved bits */ + base0 &= ~0xe007fffe; + base1 &= ~0xe007fffe; + + /* Set the appropriate DIMM base address register */ + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), base0); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), base1); +#if QRANK_DIMM_SUPPORT == 1 + if(sz->rank == 4) { + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+4)<<2), base0); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+5)<<2), base1); + } +#endif + + /* Enable the memory clocks for this DIMM by Clear the MemClkDis bit*/ + if (base0) { + uint32_t dword; + uint32_t ClkDis0; +#if CPU_SOCKET_TYPE == 0x10 /* L1 */ + ClkDis0 = DTL_MemClkDis0; +#else + #if CPU_SOCKET_TYPE == 0x11 /* AM2 */ + ClkDis0 = DTL_MemClkDis0_AM2; + #endif +#endif + + dword = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); //Channel A + dword &= ~(ClkDis0 >> index); +#if QRANK_DIMM_SUPPORT == 1 + if(sz->rank == 4) { + dword &= ~(ClkDis0 >> (index+2)); + } +#endif + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dword); + + if (is_Width128) { //Channel B + dword = pci_read_config32(ctrl->f2, DRAM_CTRL_MISC); + dword &= ~(ClkDis0 >> index); +#if QRANK_DIMM_SUPPORT == 1 + if(sz->rank == 4) { + dword &= ~(ClkDis0 >> (index+2)); + } +#endif + pci_write_config32(ctrl->f2, DRAM_CTRL_MISC, dword); + } + + } +} + +/* row col bank for 64 bit + 0: 13 9 2 :128M + 1: 13 10 2 :256M + 2: 14 10 2 :512M + 3: 13 11 2 :512M + 4: 13 10 3 :512M + 5: 14 10 3 :1G + 6: 14 11 2 :1G + 7: 15 10 3 :2G + 8: 14 11 3 :2G + 9: 15 11 3 :4G + 10: 16 10 3 :4G + 11: 16 11 3 :8G +*/ + +static void set_dimm_cs_map(const struct mem_controller *ctrl, struct dimm_size *sz, unsigned index) +{ + static const uint8_t cs_map_aaa[24] = { + /* (bank=2, row=13, col=9)(3, 16, 11) ---> (0, 0, 0) (1, 3, 2) */ + //Bank2 + 0, 1, 3, + 0, 2, 6, + 0, 0, 0, + 0, 0, 0, + //Bank3 + 0, 4, 0, + 0, 5, 8, + 0, 7, 9, + 0,10,11, + }; + + uint32_t map; + + map = pci_read_config32(ctrl->f2, DRAM_BANK_ADDR_MAP); + map &= ~(0xf << (index * 4)); +#if QRANK_DIMM_SUPPORT == 1 + if(sz->rank == 4) { + map &= ~(0xf << ( (index + 2) * 4)); + } +#endif + + /* Make certain side1 of the dimm is at least 128MB */ + if (sz->per_rank >= 27) { + unsigned temp_map; + temp_map = cs_map_aaa[(sz->bank-2)*3*4 + (sz->rows - 13)*3 + (sz->col - 9) ]; + map |= temp_map << (index*4); +#if QRANK_DIMM_SUPPORT == 1 + if(sz->rank == 4) { + map |= temp_map << ( (index + 2) * 4); + } +#endif + } + + pci_write_config32(ctrl->f2, DRAM_BANK_ADDR_MAP, map); + +} + +static long spd_set_ram_size(const struct mem_controller *ctrl, long dimm_mask, struct mem_info *meminfo) +{ + int i; + + for(i = 0; i < DIMM_SOCKETS; i++) { + struct dimm_size *sz = &(meminfo->sz[i]); + if (!(dimm_mask & (1 << i))) { + continue; + } + spd_get_dimm_size(ctrl->channel0[i], sz); + if (sz->per_rank == 0) { + return -1; /* Report SPD error */ + } + set_dimm_size(ctrl, sz, i, meminfo->is_Width128); + set_dimm_cs_map (ctrl, sz, i); + } + return dimm_mask; +} + +static void route_dram_accesses(const struct mem_controller *ctrl, + unsigned long base_k, unsigned long limit_k) +{ + /* Route the addresses to the controller node */ + unsigned node_id; + unsigned limit; + unsigned base; + unsigned index; + unsigned limit_reg, base_reg; + device_t device; + + node_id = ctrl->node_id; + index = (node_id << 3); + limit = (limit_k << 2); + limit &= 0xffff0000; + limit -= 0x00010000; + limit |= ( 0 << 8) | (node_id << 0); + base = (base_k << 2); + base &= 0xffff0000; + base |= (0 << 8) | (1<<1) | (1<<0); + + limit_reg = 0x44 + index; + base_reg = 0x40 + index; + for(device = PCI_DEV(0, 0x18, 1); device <= PCI_DEV(0, 0x1f, 1); device += PCI_DEV(0, 1, 0)) { + pci_write_config32(device, limit_reg, limit); + pci_write_config32(device, base_reg, base); + } +} + +static void set_top_mem(unsigned tom_k, unsigned hole_startk) +{ + /* Error if I don't have memory */ + if (!tom_k) { + die("No memory?"); + } + + /* Report the amount of memory. */ + print_debug("RAM: 0x"); + print_debug_hex32(tom_k); + print_debug(" KB\r\n"); + + msr_t msr; + if(tom_k > (4*1024*1024)) { + /* Now set top of memory */ + msr.lo = (tom_k & 0x003fffff) << 10; + msr.hi = (tom_k & 0xffc00000) >> 22; + wrmsr(TOP_MEM2, msr); + } + + /* Leave a 64M hole between TOP_MEM and TOP_MEM2 + * so I can see my rom chip and other I/O devices. + */ + if (tom_k >= 0x003f0000) { +#if HW_MEM_HOLE_SIZEK != 0 + if(hole_startk != 0) { + tom_k = hole_startk; + } else +#endif + tom_k = 0x3f0000; + } + msr.lo = (tom_k & 0x003fffff) << 10; + msr.hi = (tom_k & 0xffc00000) >> 22; + wrmsr(TOP_MEM, msr); +} + +static unsigned long interleave_chip_selects(const struct mem_controller *ctrl, int is_Width128) +{ + /* 35 - 27 */ + + static const uint8_t csbase_low_f0_shift[] = { + /* 128MB */ (14 - (13-5)), + /* 256MB */ (15 - (13-5)), + /* 512MB */ (15 - (13-5)), + /* 512MB */ (16 - (13-5)), + /* 512MB */ (16 - (13-5)), + /* 1GB */ (16 - (13-5)), + /* 1GB */ (16 - (13-5)), + /* 2GB */ (16 - (13-5)), + /* 2GB */ (17 - (13-5)), + /* 4GB */ (17 - (13-5)), + /* 4GB */ (16 - (13-5)), + /* 8GB */ (17 - (13-5)), + }; + + /* cs_base_high is not changed */ + + uint32_t csbase_inc; + int chip_selects, index; + int bits; + unsigned common_size; + unsigned common_cs_mode; + uint32_t csbase, csmask; + + /* See if all of the memory chip selects are the same size + * and if so count them. + */ + chip_selects = 0; + common_size = 0; + common_cs_mode = 0xff; + for(index = 0; index < 8; index++) { + unsigned size; + unsigned cs_mode; + uint32_t value; + + value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2)); + + /* Is it enabled? */ + if (!(value & 1)) { + continue; + } + chip_selects++; + size = (value >> 19) & 0x3ff; + if (common_size == 0) { + common_size = size; + } + /* The size differed fail */ + if (common_size != size) { + return 0; + } + + value = pci_read_config32(ctrl->f2, DRAM_BANK_ADDR_MAP); + cs_mode =( value >> ((index>>1)*4)) & 0xf; + if(common_cs_mode == 0xff) { + common_cs_mode = cs_mode; + } + /* The cs_mode differed fail */ + if(common_cs_mode != cs_mode) { + return 0; + } + } + + /* Chip selects can only be interleaved when there is + * more than one and their is a power of two of them. + */ + bits = log2(chip_selects); + if (((1 << bits) != chip_selects) || (bits < 1) || (bits > 3)) { //chip_selects max = 8 + return 0; + } + + /* Find the bits of csbase that we need to interleave on */ + csbase_inc = 1 << (csbase_low_f0_shift[common_cs_mode]); + if(is_Width128) { + csbase_inc <<=1; + } + + + /* Compute the initial values for csbase and csbask. + * In csbase just set the enable bit and the base to zero. + * In csmask set the mask bits for the size and page level interleave. + */ + csbase = 0 | 1; + csmask = (((common_size << bits) - 1) << 19); + csmask |= 0x3fe0 & ~((csbase_inc << bits) - csbase_inc); + for(index = 0; index < 8; index++) { + uint32_t value; + + value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2)); + /* Is it enabled? */ + if (!(value & 1)) { + continue; + } + pci_write_config32(ctrl->f2, DRAM_CSBASE + (index << 2), csbase); + if((index & 1) == 0) { //only have 4 CSMASK + pci_write_config32(ctrl->f2, DRAM_CSMASK + ((index>>1) << 2), csmask); + } + csbase += csbase_inc; + } + + print_debug("Interleaved\r\n"); + + /* Return the memory size in K */ + return common_size << ((27-10) + bits); +} +static unsigned long order_chip_selects(const struct mem_controller *ctrl) +{ + unsigned long tom; + + /* Remember which registers we have used in the high 8 bits of tom */ + tom = 0; + for(;;) { + /* Find the largest remaining canidate */ + unsigned index, canidate; + uint32_t csbase, csmask; + unsigned size; + csbase = 0; + canidate = 0; + for(index = 0; index < 8; index++) { + uint32_t value; + value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2)); + + /* Is it enabled? */ + if (!(value & 1)) { + continue; + } + + /* Is it greater? */ + if (value <= csbase) { + continue; + } + + /* Has it already been selected */ + if (tom & (1 << (index + 24))) { + continue; + } + /* I have a new canidate */ + csbase = value; + canidate = index; + } + /* See if I have found a new canidate */ + if (csbase == 0) { + break; + } + + /* Remember the dimm size */ + size = csbase >> 19; + + /* Remember I have used this register */ + tom |= (1 << (canidate + 24)); + + /* Recompute the cs base register value */ + csbase = (tom << 19) | 1; + + /* Increment the top of memory */ + tom += size; + + /* Compute the memory mask */ + csmask = ((size -1) << 19); + csmask |= 0x3fe0; /* For now don't optimize */ + + /* Write the new base register */ + pci_write_config32(ctrl->f2, DRAM_CSBASE + (canidate << 2), csbase); + /* Write the new mask register */ + if((canidate & 1) == 0) { //only have 4 CSMASK + pci_write_config32(ctrl->f2, DRAM_CSMASK + ((canidate>>1) << 2), csmask); + } + + } + /* Return the memory size in K */ + return (tom & ~0xff000000) << (27-10); +} + +unsigned long memory_end_k(const struct mem_controller *ctrl, int max_node_id) +{ + unsigned node_id; + unsigned end_k; + /* Find the last memory address used */ + end_k = 0; + for(node_id = 0; node_id < max_node_id; node_id++) { + uint32_t limit, base; + unsigned index; + index = node_id << 3; + base = pci_read_config32(ctrl->f1, 0x40 + index); + /* Only look at the limit if the base is enabled */ + if ((base & 3) == 3) { + limit = pci_read_config32(ctrl->f1, 0x44 + index); + end_k = ((limit + 0x00010000) & 0xffff0000) >> 2; + } + } + return end_k; +} + +static void order_dimms(const struct mem_controller *ctrl, struct mem_info *meminfo) +{ + unsigned long tom_k, base_k; + + if (read_option(CMOS_VSTART_interleave_chip_selects, CMOS_VLEN_interleave_chip_selects, 1) != 0) { + tom_k = interleave_chip_selects(ctrl, meminfo->is_Width128); + } else { + print_debug("Interleaving disabled\r\n"); + tom_k = 0; + } + if (!tom_k) { + tom_k = order_chip_selects(ctrl); + } + /* Compute the memory base address */ + base_k = memory_end_k(ctrl, ctrl->node_id); + tom_k += base_k; + route_dram_accesses(ctrl, base_k, tom_k); + set_top_mem(tom_k, 0); +} + +static long disable_dimm(const struct mem_controller *ctrl, unsigned index, long dimm_mask, struct mem_info *meminfo) +{ + print_debug("disabling dimm"); + print_debug_hex8(index); + print_debug("\r\n"); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+0)<<2), 0); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+1)<<2), 0); +#if QRANK_DIMM_SUPPORT == 1 + if(meminfo->sz[index].rank == 4) { + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+4)<<2), 0); + pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1)+5)<<2), 0); + } +#endif + + dimm_mask &= ~(1 << index); + return dimm_mask; +} + +static long spd_handle_unbuffered_dimms(const struct mem_controller *ctrl, long dimm_mask, struct mem_info *meminfo) +{ + int i; + uint32_t registered; + uint32_t dcl; + registered = 0; + for(i = 0; (i < DIMM_SOCKETS); i++) { + int value; + if (!(dimm_mask & (1 << i))) { + continue; + } + value = spd_read_byte(ctrl->channel0[i], SPD_DIMM_TYPE); + if (value < 0) { + return -1; + } + /* Registered dimm ? */ + value &= 0x3f; + if ((value == SPD_DIMM_TYPE_RDIMM) || (value == SPD_DIMM_TYPE_mRDIMM)) { + //check SPD_MOD_ATTRIB to verify it is SPD_MOD_ATTRIB_REGADC (0x11)? + registered |= (1<<i); + } + } + + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~DCL_UnBuffDimm; + meminfo->is_registered = 1; + if (!registered) { + dcl |= DCL_UnBuffDimm; + meminfo->is_registered = 0; + } + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); + +#if 1 + if (meminfo->is_registered) { + print_debug("Registered\r\n"); + } else { + print_debug("Unbuffered\r\n"); + } +#endif + return dimm_mask; +} + +static unsigned int spd_detect_dimms(const struct mem_controller *ctrl) +{ + unsigned dimm_mask; + int i; + dimm_mask = 0; + for(i = 0; i < DIMM_SOCKETS; i++) { + int byte; + unsigned device; + device = ctrl->channel0[i]; + if (device) { + byte = spd_read_byte(ctrl->channel0[i], SPD_MEM_TYPE); /* Type */ + if (byte == SPD_MEM_TYPE_SDRAM_DDR2) { + dimm_mask |= (1 << i); + } + } + device = ctrl->channel1[i]; + if (device) { + byte = spd_read_byte(ctrl->channel1[i], SPD_MEM_TYPE); + if (byte == SPD_MEM_TYPE_SDRAM_DDR2) { + dimm_mask |= (1 << (i + DIMM_SOCKETS)); + } + } + } + return dimm_mask; +} + +static long spd_enable_2channels(const struct mem_controller *ctrl, long dimm_mask, struct mem_info *meminfo) +{ + int i; + uint32_t nbcap; + /* SPD addresses to verify are identical */ + static const uint8_t addresses[] = { + 2, /* Type should be DDR2 SDRAM */ + 3, /* *Row addresses */ + 4, /* *Column addresses */ + 5, /* *Number of DIMM Ranks */ + 6, /* *Module Data Width*/ + 9, /* *Cycle time at highest CAS Latency CL=X */ + 11, /* *DIMM Conf Type */ + 13, /* *Pri SDRAM Width */ + 17, /* *Logical Banks */ + 18, /* *Supported CAS Latencies */ + 20, /* *DIMM Type Info */ + 21, /* *SDRAM Module Attributes */ + 23, /* *Cycle time at CAS Latnecy (CLX - 1) */ + 26, /* *Cycle time at CAS Latnecy (CLX - 2) */ + 27, /* *tRP Row precharge time */ + 28, /* *Minimum Row Active to Row Active Delay (tRRD) */ + 29, /* *tRCD RAS to CAS */ + 30, /* *tRAS Activate to Precharge */ + 36, /* *Write recovery time (tWR) */ + 37, /* *Internal write to read command delay (tRDP) */ + 38, /* *Internal read to precharge commanfd delay (tRTP) */ + 41, /* *Extension of Byte 41 tRC and Byte 42 tRFC */ + 41, /* *Minimum Active to Active/Auto Refresh Time(Trc) */ + 42, /* *Minimum Auto Refresh Command Time(Trfc) */ + }; + /* If the dimms are not in pairs do not do dual channels */ + if ((dimm_mask & ((1 << DIMM_SOCKETS) - 1)) != + ((dimm_mask >> DIMM_SOCKETS) & ((1 << DIMM_SOCKETS) - 1))) { + goto single_channel; + } + /* If the cpu is not capable of doing dual channels don't do dual channels */ + nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); + if (!(nbcap & NBCAP_128Bit)) { + goto single_channel; + } + for(i = 0; (i < 4) && (ctrl->channel0[i]); i++) { + unsigned device0, device1; + int value0, value1; + int j; + /* If I don't have a dimm skip this one */ + if (!(dimm_mask & (1 << i))) { + continue; + } + device0 = ctrl->channel0[i]; + device1 = ctrl->channel1[i]; + for(j = 0; j < sizeof(addresses)/sizeof(addresses[0]); j++) { + unsigned addr; + addr = addresses[j]; + value0 = spd_read_byte(device0, addr); + if (value0 < 0) { + return -1; + } + value1 = spd_read_byte(device1, addr); + if (value1 < 0) { + return -1; + } + if (value0 != value1) { + goto single_channel; + } + } + } + print_spew("Enabling dual channel memory\r\n"); + uint32_t dcl; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~DCL_BurstLength32; /* 32byte mode may be preferred in platforms that include graphics controllers that generate a lot of 32-bytes system memory accesses + 32byte mode is not supported when the DRAM interface is 128 bits wides, even 32byte mode is set, system still use 64 byte mode */ + dcl |= DCL_Width128; + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); + meminfo->is_Width128 = 1; + return dimm_mask; + single_channel: + dimm_mask &= ~((1 << (DIMM_SOCKETS *2)) - (1 << DIMM_SOCKETS)); + meminfo->is_Width128 = 0; + return dimm_mask; +} + +struct mem_param { + uint16_t cycle_time; + uint8_t divisor; /* In 1/40 ns increments */ + uint8_t TrwtTO; + uint8_t Twrrd; + uint8_t Twrwr; + uint8_t Trdrd; + uint8_t DcqByPassMax; + uint32_t dch_memclk; + char name[9]; +}; + + static const struct mem_param speed[] = { + { + .name = "200Mhz\r\n", + .cycle_time = 0x500, + .divisor = 200, // how many 1/40ns per clock + .dch_memclk = DCH_MemClkFreq_200MHz, //0 + .TrwtTO = 7, + .Twrrd = 2, + .Twrwr = 2, + .Trdrd = 3, + .DcqByPassMax = 4, + + }, + { + .name = "266Mhz\r\n", + .cycle_time = 0x375, + .divisor = 150, //???? + .dch_memclk = DCH_MemClkFreq_266MHz, //1 + .TrwtTO = 7, + .Twrrd = 2, + .Twrwr = 2, + .Trdrd = 3, + .DcqByPassMax = 4, + }, + { + .name = "333Mhz\r\n", + .cycle_time = 0x300, + .divisor = 120, + .dch_memclk = DCH_MemClkFreq_333MHz, //2 + .TrwtTO = 7, + .Twrrd = 2, + .Twrwr = 2, + .Trdrd = 3, + .DcqByPassMax = 4, + + }, + { + .name = "400Mhz\r\n", + .cycle_time = 0x250, + .divisor = 100, + .dch_memclk = DCH_MemClkFreq_400MHz,//3 + .TrwtTO = 7, + .Twrrd = 2, + .Twrwr = 2, + .Trdrd = 3, + .DcqByPassMax = 4, + }, + { + .cycle_time = 0x000, + }, + }; + +static const struct mem_param *get_mem_param(unsigned min_cycle_time) +{ + + const struct mem_param *param; + for(param = &speed[0]; param->cycle_time ; param++) { + if (min_cycle_time > (param+1)->cycle_time) { + break; + } + } + if (!param->cycle_time) { + die("min_cycle_time to low"); + } + print_spew(param->name); +#ifdef DRAM_MIN_CYCLE_TIME + print_debug(param->name); +#endif + return param; +} + +static uint8_t get_exact_divisor(int i, uint8_t divisor) +{ + //input divisor could be 200(200), 150(266), 120(333), 100 (400) + static const uint8_t dv_a[] = { + /* 200 266 333 400 */ + /*4 */ 250, 250, 250, 250, + /*5 */ 200, 200, 200, 100, + /*6 */ 200, 166, 166, 100, + /*7 */ 200, 171, 142, 100, + + /*8 */ 200, 150, 125, 100, + /*9 */ 200, 156, 133, 100, + /*10*/ 200, 160, 120, 100, + /*11*/ 200, 163, 127, 100, + + /*12*/ 200, 150, 133, 100, + /*13*/ 200, 153, 123, 100, + /*14*/ 200, 157, 128, 100, + /*15*/ 200, 160, 120, 100, + }; + + unsigned fid_cur; + int index; + + msr_t msr; + msr = rdmsr(0xc0010042); + fid_cur = msr.lo & 0x3f; + + index = fid_cur>>1; + + if(index>12) return divisor; + + if(i>3) return divisor; + + return dv_a[index * 4+i]; + +} + +struct spd_set_memclk_result { + const struct mem_param *param; + long dimm_mask; +}; + +static unsigned convert_to_linear(unsigned value) +{ + static const unsigned fraction[] = { 0x25, 0x33, 0x66, 0x75 }; + unsigned valuex; + + /* We need to convert value to more readable */ + if((value & 0xf) < 10) { //no .25, .33, .66, .75 + value <<= 4; + } else { + valuex = ((value & 0xf0) << 4) | fraction [(value & 0xf)-10]; + value = valuex; + } + return value; +} + +static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller *ctrl, long dimm_mask, struct mem_info *meminfo) +{ + /* Compute the minimum cycle time for these dimms */ + struct spd_set_memclk_result result; + unsigned min_cycle_time, min_latency, bios_cycle_time; + int i; + uint32_t value; + + static const uint8_t latency_indicies[] = { 25, 23, 9 }; + + static const uint16_t min_cycle_times[] = { // use full speed to compare + [NBCAP_MEMCLK_NOLIMIT] = 0x250, /*2.5ns */ + [NBCAP_MEMCLK_333MHZ] = 0x300, /* 3.0ns */ + [NBCAP_MEMCLK_266MHZ] = 0x375, /* 3.75ns */ + [NBCAP_MEMCLK_200MHZ] = 0x500, /* 5.0s */ + }; + + + value = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); + min_cycle_time = min_cycle_times[(value >> NBCAP_MEMCLK_SHIFT) & NBCAP_MEMCLK_MASK]; + bios_cycle_time = min_cycle_times[ + read_option(CMOS_VSTART_max_mem_clock, CMOS_VLEN_max_mem_clock, 0)]; + if (bios_cycle_time > min_cycle_time) { + min_cycle_time = bios_cycle_time; + } + min_latency = 3; + + print_tx("1 min_cycle_time:", min_cycle_time); + + /* Compute the least latency with the fastest clock supported + * by both the memory controller and the dimms. + */ + for(i = 0; i < DIMM_SOCKETS; i++) { + int new_cycle_time, new_latency; + int index; + int latencies; + int latency; + + if (!(dimm_mask & (1 << i))) { + continue; + } + + /* First find the supported CAS latencies + * Byte 18 for DDR SDRAM is interpreted: + * bit 3 == CAS Latency = 3 + * bit 4 == CAS Latency = 4 + * bit 5 == CAS Latency = 5 + * bit 6 == CAS Latency = 6 + */ + new_cycle_time = 0x500; + new_latency = 6; + + latencies = spd_read_byte(ctrl->channel0[i], SPD_CAS_LAT); + if (latencies <= 0) continue; + + print_tx("i:",i); + print_tx("\tlatencies:", latencies); + /* Compute the lowest cas latency supported */ + latency = log2(latencies) - 2; + + /* Loop through and find a fast clock with a low latency */ + for(index = 0; index < 3; index++, latency++) { + int value; + if ((latency < 3) || (latency > 6) || + (!(latencies & (1 << latency)))) { + continue; + } + value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]); + if (value < 0) { + goto hw_error; + } + print_tx("\tindex:", index); + print_tx("\t\tlatency:", latency); + print_tx("\t\tvalue1:", value); + + value = convert_to_linear(value); + + print_tx("\t\tvalue2:", value); + + /* Only increase the latency if we decreas the clock */ + if (value >= min_cycle_time ) { + if(value < new_cycle_time) { + new_cycle_time = value; + new_latency = latency; + } else if (value == new_cycle_time) { + if(new_latency > latency) { + new_latency = latency; + } + } + } + print_tx("\t\tnew_cycle_time:", new_cycle_time); + print_tx("\t\tnew_latency:", new_latency); + + } + if (new_latency > 6){ + continue; + } + /* Does min_latency need to be increased? */ + if (new_cycle_time > min_cycle_time) { + min_cycle_time = new_cycle_time; + } + /* Does min_cycle_time need to be increased? */ + if (new_latency > min_latency) { + min_latency = new_latency; + } + + print_tx("2 min_cycle_time:", min_cycle_time); + print_tx("2 min_latency:", min_latency); + } + /* Make a second pass through the dimms and disable + * any that cannot support the selected memclk and cas latency. + */ + + print_tx("3 min_cycle_time:", min_cycle_time); + print_tx("3 min_latency:", min_latency); + + for(i = 0; (i < DIMM_SOCKETS) && (ctrl->channel0[i]); i++) { + int latencies; + int latency; + int index; + int value; + if (!(dimm_mask & (1 << i))) { + continue; + } + latencies = spd_read_byte(ctrl->channel0[i], SPD_CAS_LAT); + if (latencies < 0) goto hw_error; + if (latencies == 0) { + continue; +// goto dimm_err; + } + + /* Compute the lowest cas latency supported */ + latency = log2(latencies) -2; + + /* Walk through searching for the selected latency */ + for(index = 0; index < 3; index++, latency++) { + if (!(latencies & (1 << latency))) { + continue; + } + if (latency == min_latency) + break; + } + /* If I can't find the latency or my index is bad error */ + if ((latency != min_latency) || (index >= 3)) { + goto dimm_err; + } + + /* Read the min_cycle_time for this latency */ + value = spd_read_byte(ctrl->channel0[i], latency_indicies[index]); + if (value < 0) goto hw_error; + + value = convert_to_linear(value); + /* All is good if the selected clock speed + * is what I need or slower. + */ + if (value <= min_cycle_time) { + continue; + } + /* Otherwise I have an error, disable the dimm */ + dimm_err: + dimm_mask = disable_dimm(ctrl, i, dimm_mask, meminfo); + } + + print_tx("4 min_cycle_time:", min_cycle_time); + + /* Now that I know the minimum cycle time lookup the memory parameters */ + result.param = get_mem_param(min_cycle_time); + + /* Update DRAM Config High with our selected memory speed */ + value = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + value &= ~(DCH_MemClkFreq_MASK << DCH_MemClkFreq_SHIFT); + + value |= result.param->dch_memclk << DCH_MemClkFreq_SHIFT; + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, value); + + print_debug(result.param->name); + + /* Update DRAM Timing Low with our selected cas latency */ + value = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + value &= ~(DTL_TCL_MASK << DTL_TCL_SHIFT); + value |= (min_latency - DTL_TCL_BASE) << DTL_TCL_SHIFT; + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, value); + + result.dimm_mask = dimm_mask; + return result; + hw_error: + result.param = (const struct mem_param *)0; + result.dimm_mask = -1; + return result; +} + +static unsigned convert_to_1_4(unsigned value) +{ + static const uint8_t fraction[] = { 0, 1, 2, 2, 3, 3, 0 }; + unsigned valuex; + + /* We need to convert value to more readable */ + valuex = fraction [value & 0x7]; + return valuex; +} +static int update_dimm_Trc(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + int value2; + value = spd_read_byte(ctrl->channel0[i], SPD_TRC); + if (value < 0) return -1; + + value2 = spd_read_byte(ctrl->channel0[i], SPD_TRC -1); + value <<= 2; + value += convert_to_1_4(value2>>4); + + value *=10; + + clocks = (value + param->divisor - 1)/param->divisor; + + if (clocks < DTL_TRC_MIN) { + clocks = DTL_TRC_MIN; + } + if (clocks > DTL_TRC_MAX) { + return 0; + } + + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + old_clocks = ((dtl >> DTL_TRC_SHIFT) & DTL_TRC_MASK) + DTL_TRC_BASE; + if (old_clocks >= clocks) { //?? someone did it + // clocks = old_clocks; + return 1; + } + dtl &= ~(DTL_TRC_MASK << DTL_TRC_SHIFT); + dtl |= ((clocks - DTL_TRC_BASE) << DTL_TRC_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); + return 1; +} + +static int update_dimm_Trfc(const struct mem_controller *ctrl, const struct mem_param *param, int i, struct mem_info *meminfo) +{ + unsigned clocks, old_clocks; + uint32_t dth; + int value; + +#if 0 + int value2; + + value = spd_read_byte(ctrl->channel0[i], SPD_TRFC); + if (value < 0) return -1; + + value2 = spd_read_byte(ctrl->channel0[i], SPD_TRC -1); + if(value2 & 1) value += 256; + value <<= 2; + value += convert_to_1_4(value2>>1); + + if (value == 0) { + value = param->tRFC; + } + value *= 10; + clocks = (value + param->divisor - 1)/param->divisor; +#endif + //get the cs_size --> logic dimm size + value = spd_read_byte(ctrl->channel0[i], SPD_PRI_WIDTH); + if (value < 0) { + return -1; + } + + value = 6 - log2(value); //4-->4, 8-->3, 16-->2 + + clocks = meminfo->sz[i].per_rank - 27 + 2 - value; + + dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); + + old_clocks = ((dth >> (DTH_TRFC0_SHIFT+i*3)) & DTH_TRFC_MASK); + if (old_clocks >= clocks) { // some one did it? +// clocks = old_clocks; + return 1; + } + dth &= ~(DTH_TRFC_MASK << (DTH_TRFC0_SHIFT+i*3)); + dth |= clocks << (DTH_TRFC0_SHIFT+i*3); + pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); + return 1; +} + +static int update_dimm_TT_1_4(const struct mem_controller *ctrl, const struct mem_param *param, int i, + unsigned TT_REG, + unsigned SPD_TT, unsigned TT_SHIFT, unsigned TT_MASK, unsigned TT_BASE, unsigned TT_MIN, unsigned TT_MAX ) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + value = spd_read_byte(ctrl->channel0[i], SPD_TT); //already in 1/4 ns + if (value < 0) return -1; + value *=10; + clocks = (value + param->divisor -1)/param->divisor; + if (clocks < TT_MIN) { + clocks = TT_MIN; + } + if (clocks > TT_MAX) { + return 0; + } + dtl = pci_read_config32(ctrl->f2, TT_REG); + + old_clocks = ((dtl >> TT_SHIFT) & TT_MASK) + TT_BASE; + if (old_clocks >= clocks) { //some one did it? +// clocks = old_clocks; + return 1; + } + dtl &= ~(TT_MASK << TT_SHIFT); + dtl |= ((clocks - TT_BASE) << TT_SHIFT); + pci_write_config32(ctrl->f2, TT_REG, dtl); + return 1; +} + +static int update_dimm_Trcd(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_LOW, SPD_TRCD, DTL_TRCD_SHIFT, DTL_TRCD_MASK, DTL_TRCD_BASE, DTL_TRCD_MIN, DTL_TRCD_MAX); +} + +static int update_dimm_Trrd(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_LOW, SPD_TRRD, DTL_TRRD_SHIFT, DTL_TRRD_MASK, DTL_TRRD_BASE, DTL_TRRD_MIN, DTL_TRRD_MAX); +} + +static int update_dimm_Tras(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + unsigned clocks, old_clocks; + uint32_t dtl; + int value; + value = spd_read_byte(ctrl->channel0[i], SPD_TRAS); //in 1 ns + if (value < 0) return -1; + print_tx("update_dimm_Tras: 0 value=", value); + + value<<=2; //convert it to in 1/4ns + + value *= 10; + print_tx("update_dimm_Tras: 1 value=", value); + + clocks = (value + param->divisor - 1)/param->divisor; + print_tx("update_dimm_Tras: divisor=", param->divisor); + print_tx("update_dimm_Tras: clocks=", clocks); + if (clocks < DTL_TRAS_MIN) { + clocks = DTL_TRAS_MIN; + } + if (clocks > DTL_TRAS_MAX) { + return 0; + } + dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); + old_clocks = ((dtl >> DTL_TRAS_SHIFT) & DTL_TRAS_MASK) + DTL_TRAS_BASE; + if (old_clocks >= clocks) { // someone did it? +// clocks = old_clocks; + return 1; + } + dtl &= ~(DTL_TRAS_MASK << DTL_TRAS_SHIFT); + dtl |= ((clocks - DTL_TRAS_BASE) << DTL_TRAS_SHIFT); + pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl); + return 1; +} + +static int update_dimm_Trp(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_LOW, SPD_TRP, DTL_TRP_SHIFT, DTL_TRP_MASK, DTL_TRP_BASE, DTL_TRP_MIN, DTL_TRP_MAX); +} + +static int update_dimm_Trtp(const struct mem_controller *ctrl, const struct mem_param *param, int i, struct mem_info *meminfo) +{ + //need to figure if it is 32 byte burst or 64 bytes burst + int offset = 2; + if(!meminfo->is_Width128) { + uint32_t dword; + dword = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + if((dword & DCL_BurstLength32)) offset = 0; + } + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_LOW, SPD_TRTP, DTL_TRTP_SHIFT, DTL_TRTP_MASK, DTL_TRTP_BASE+offset, DTL_TRTP_MIN+offset, DTL_TRTP_MAX+offset); +} + + +static int update_dimm_Twr(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_LOW, SPD_TWR, DTL_TWR_SHIFT, DTL_TWR_MASK, DTL_TWR_BASE, DTL_TWR_MIN, DTL_TWR_MAX); +} + + +static int update_dimm_Tref(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + uint32_t dth, dth_old; + int value; + value = spd_read_byte(ctrl->channel0[i], SPD_TREF); // 0: 15.625us, 1: 3.9us 2: 7.8 us.... + if (value < 0) return -1; + + if(value == 1 ) { + value = 3; + } else { + value = 2; + } + + dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH); + + dth_old = dth; + dth &= ~(DTH_TREF_MASK << DTH_TREF_SHIFT); + dth |= (value << DTH_TREF_SHIFT); + if(dth_old != dth) { + pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth); + } + return 1; +} + +static void set_4RankRDimm(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo) +{ +#if QRANK_DIMM_SUPPRT == 1 + int value; + int i; + + + if(!(meminfo->is_registered)) return; + + value = 0; + + for(i = 0; i < DIMM_SOCKETS; i++) { + if (!(dimm_mask & (1 << i))) { + continue; + } + + if(meminfo->sz.rank == 4) { + value = 1; + break; + } + } + + if(value == 1) { + uint32_t dch; + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + dch |= DCH_FourRankRDimm; + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); + } +#endif +} + + +static uint32_t get_extra_dimm_mask(const struct mem_controller *ctrl, struct mem_info *meminfo) +{ + int i; + + uint32_t mask_x4; + uint32_t mask_x16; + uint32_t mask_single_rank; + uint32_t mask_page_1k; + int value; +#if QRANK_DIMM_SUPPORT == 1 + int rank; +#endif + + long dimm_mask = meminfo->dimm_mask; + + + mask_x4 = 0; + mask_x16 = 0; + mask_single_rank = 0; + mask_page_1k = 0; + + for(i = 0; i < DIMM_SOCKETS; i++) { + + if (!(dimm_mask & (1 << i))) { + continue; + } + + if(meminfo->sz[i].rank == 1) { + mask_single_rank |= 1<<i; + } + + if(meminfo->sz[i].col==10) { + mask_page_1k |= 1<<i; + } + + + value = spd_read_byte(ctrl->channel0[i], SPD_PRI_WIDTH); + + #if QRANK_DIMM_SUPPORT == 1 + rank = meminfo->sz[i].rank; + #endif + + if(value==4) { + mask_x4 |= (1<<i); + #if QRANK_DIMM_SUPPORT == 1 + if(rank==4) { + mask_x4 |= 1<<(i+2); + } + #endif + } else if(value==16) { + mask_x16 |= (1<<i); + #if QRANK_DIMM_SUPPORT == 1 + if(rank==4) { + mask_x16 |= 1<<(i+2); + } + #endif + } + + } + + meminfo->x4_mask= mask_x4; + meminfo->x16_mask = mask_x16; + + meminfo->single_rank_mask = mask_single_rank; + meminfo->page_1k_mask = mask_page_1k; + + return mask_x4; + +} + + +static void set_dimm_x4(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo) +{ + uint32_t dcl; + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~(DCL_X4Dimm_MASK<<DCL_X4Dimm_SHIFT); + dcl |= ((meminfo->x4_mask) & 0xf) << (DCL_X4Dimm_SHIFT); + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); +} + +static int count_ones(uint32_t dimm_mask) +{ + int dimms; + unsigned index; + dimms = 0; + for(index = 0; index < DIMM_SOCKETS; index++, dimm_mask>>=1) { + if (dimm_mask & 1) { + dimms++; + } + } + return dimms; +} + + +static void set_DramTerm(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo) +{ + uint32_t dcl; + unsigned odt; + odt = 1; // 75 ohms + + if(param->divisor == 100) { //DDR2 800 + if(meminfo->is_Width128) { + if(count_ones(meminfo->dimm_mask & 0x0f)==2) { + odt = 3; //50 ohms + } + } + + } + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~(DCL_DramTerm_MASK<<DCL_DramTerm_SHIFT); + dcl |= (odt & DCL_DramTerm_MASK) << (DCL_DramTerm_SHIFT); + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); +} + + +static void set_ecc(const struct mem_controller *ctrl,const struct mem_param *param, long dimm_mask, struct mem_info *meminfo) +{ + int i; + int value; + + uint32_t dcl, nbcap; + nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP); + dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW); + dcl &= ~DCL_DimmEccEn; + if (nbcap & NBCAP_ECC) { + dcl |= DCL_DimmEccEn; + } + if (read_option(CMOS_VSTART_ECC_memory, CMOS_VLEN_ECC_memory, 1) == 0) { + dcl &= ~DCL_DimmEccEn; + } + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); + + meminfo->is_ecc = 1; + if(!(dcl & DCL_DimmEccEn)) { + meminfo->is_ecc = 0; + return; // already disabled the ECC, so don't need to read SPD any more + } + + for(i = 0; i < DIMM_SOCKETS; i++) { + + if (!(dimm_mask & (1 << i))) { + continue; + } + + value = spd_read_byte(ctrl->channel0[i], SPD_DIMM_CONF_TYPE); + + if(!(value & SPD_DIMM_CONF_TYPE_ECC)) { + dcl &= ~DCL_DimmEccEn; + pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl); + meminfo->is_ecc = 0; + return; + } + + } +} + +static int update_dimm_Twtr(const struct mem_controller *ctrl, const struct mem_param *param, int i) +{ + + return update_dimm_TT_1_4(ctrl, param, i, DRAM_TIMING_HIGH, SPD_TWTR, DTH_TWTR_SHIFT, DTH_TWTR_MASK, DTH_TWTR_BASE, DTH_TWTR_MIN, DTH_TWTR_MAX); + +} + +static void set_TT(const struct mem_controller *ctrl, const struct mem_param *param, unsigned TT_REG, + unsigned TT_SHIFT, unsigned TT_MASK, unsigned TT_BASE, unsigned TT_MIN, unsigned TT_MAX, unsigned val, const char *str) +{ + uint32_t reg; + + if ((val < TT_MIN) || (val > TT_MAX)) { + print_err(str); + die(" Unknown\r\n"); + } + + reg = pci_read_config32(ctrl->f2, TT_REG); + reg &= ~(TT_MASK << TT_SHIFT); + reg |= ((val - TT_BASE) << TT_SHIFT); + pci_write_config32(ctrl->f2, TT_REG, reg); + return; +} + +static void set_TrwtTO(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TRWTTO_SHIFT, DTH_TRWTTO_MASK,DTH_TRWTTO_BASE, DTH_TRWTTO_MIN, DTH_TRWTTO_MAX, param->TrwtTO, "TrwtTO"); +} + +static void set_Twrrd(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TWRRD_SHIFT, DTH_TWRRD_MASK,DTH_TWRRD_BASE, DTH_TWRRD_MIN, DTH_TWRRD_MAX, param->Twrrd, "Twrrd"); +} + +static void set_Twrwr(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TWRWR_SHIFT, DTH_TWRWR_MASK,DTH_TWRWR_BASE, DTH_TWRWR_MIN, DTH_TWRWR_MAX, param->Twrwr, "Twrwr"); +} + +static void set_Trdrd(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TRDRD_SHIFT, DTH_TRDRD_MASK,DTH_TRDRD_BASE, DTH_TRDRD_MIN, DTH_TRDRD_MAX, param->Trdrd, "Trdrd"); +} + +static void set_DcqBypassMax(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_CONFIG_HIGH, DCH_DcqBypassMax_SHIFT, DCH_DcqBypassMax_MASK,DCH_DcqBypassMax_BASE, DCH_DcqBypassMax_MIN, DCH_DcqBypassMax_MAX, param->DcqByPassMax, "DcqBypassMax"); // value need to be in CMOS +} + +static void set_Tfaw(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo) +{ + static const uint8_t faw_1k[] = {8, 10, 13, 14}; + static const uint8_t faw_2k[] = {10, 14, 17, 18}; + unsigned memclkfreq_index; + unsigned faw; + + + memclkfreq_index = param->dch_memclk; + + if(meminfo->page_1k_mask != 0) { //1k page + faw = faw_1k[memclkfreq_index]; + } + else { + faw = faw_2k[memclkfreq_index]; + } + + set_TT(ctrl, param, DRAM_CONFIG_HIGH, DCH_FourActWindow_SHIFT, DCH_FourActWindow_MASK, DCH_FourActWindow_BASE, DCH_FourActWindow_MIN, DCH_FourActWindow_MAX, faw, "FourActWindow"); + +} + + +static void set_max_async_latency(const struct mem_controller *ctrl, const struct mem_param *param) +{ + uint32_t dch; + unsigned async_lat; + + + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + dch &= ~(DCH_MaxAsyncLat_MASK << DCH_MaxAsyncLat_SHIFT); + + async_lat = 6+6; + + + dch |= ((async_lat - DCH_MaxAsyncLat_BASE) << DCH_MaxAsyncLat_SHIFT); + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); +} + +static void set_SlowAccessMode(const struct mem_controller *ctrl) +{ + uint32_t dch; + + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + + dch |= (1<<20); + + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); +} + + +/* + DRAM_OUTPUT_DRV_COMP_CTRL 0, 0x20 + DRAM_ADDR_TIMING_CTRL 04, 0x24 +*/ +static void set_misc_timing(const struct mem_controller *ctrl, struct mem_info *meminfo) +{ + uint32_t dword; + uint32_t dwordx; + unsigned SlowAccessMode = 0; + + long dimm_mask = meminfo->dimm_mask & 0x0f; + +#if DIMM_SUPPORT==0x0104 /* DDR2 and REG */ + /* for REG DIMM */ + dword = 0x00111222; + dwordx = 0x002f0000; + switch (meminfo->memclk_set) { + case DCH_MemClkFreq_266MHz: + if( (dimm_mask == 0x03) || (dimm_mask == 0x02) || (dimm_mask == 0x01)) { + dwordx = 0x002f2700; + } + break; + case DCH_MemClkFreq_333MHz: + if( (dimm_mask == 0x03) || (dimm_mask == 0x02) || (dimm_mask == 0x01)) { + if ((meminfo->single_rank_mask & 0x03)!=0x03) { //any double rank there? + dwordx = 0x002f2f00; + } + } + break; + case DCH_MemClkFreq_400MHz: + dwordx = 0x002f3300; + break; + } + +#endif + +#if DIMM_SUPPORT==0x0004 /* DDR2 and unbuffered */ + /* for UNBUF DIMM */ + dword = 0x00111222; + dwordx = 0x002f2f00; + switch (meminfo->memclk_set) { + case DCH_MemClkFreq_200MHz: + if(dimm_mask == 0x03) { + SlowAccessMode = 1; + dword = 0x00111322; + } + break; + case DCH_MemClkFreq_266MHz: + if(dimm_mask == 0x03) { + SlowAccessMode = 1; + dword = 0x00111322; + if((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0)) { + switch (meminfo->single_rank_mask) { + case 0x03: + dwordx = 0x00002f00; //x8 single Rank + break; + case 0x00: + dwordx = 0x00342f00; //x8 double Rank + break; + default: + dwordx = 0x00372f00; //x8 single Rank and double Rank mixed + } + } else if((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0x01) && (meminfo->single_rank_mask == 0x01)) { + dwordx = 0x00382f00; //x8 Double Rank and x16 single Rank mixed + } else if((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0x02) && (meminfo->single_rank_mask == 0x02)) { + dwordx = 0x00382f00; //x16 single Rank and x8 double Rank mixed + } + + } + else { + if((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0x00) && ((meminfo->single_rank_mask == 0x01)||(meminfo->single_rank_mask == 0x02))) { //x8 single rank + dwordx = 0x002f2f00; + } else { + dwordx = 0x002b2f00; + } + } + break; + case DCH_MemClkFreq_333MHz: + dwordx = 0x00202220; + if(dimm_mask == 0x03) { + SlowAccessMode = 1; + dword = 0x00111322; + if((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0)) { + switch (meminfo->single_rank_mask) { + case 0x03: + dwordx = 0x00302220; //x8 single Rank + break; + case 0x00: + dwordx = 0x002b2220; //x8 double Rank + break; + defalut: + dwordx = 0x002a2220; //x8 single Rank and double Rank mixed + } + } else if((meminfo->x4_mask == 0) && (meminfo->x16_mask == 0x01) && (meminfo->single_rank_mask == 0x01)) { + dwordx = 0x002c2220; //x8 Double Rank and x16 single Rank mixed + } else if((meminfo->x4_mask == 0) && (meminfo->x16_mask == 0x02) && (meminfo->single_rank_mask == 0x02)) { + dwordx = 0x002c2220; //x16 single Rank and x8 double Rank mixed + } + } + break; + case DCH_MemClkFreq_400MHz: + dwordx = 0x00202520; + SlowAccessMode = 1; + if(dimm_mask == 0x03) { + dword = 0x00113322; + } else { + dword = 0x00113222; + } + break; + } + + print_raminit("\tdimm_mask = ", meminfo->dimm_mask); + print_raminit("\tx4_mask = ", meminfo->x4_mask); + print_raminit("\tx16_mask = ", meminfo->x16_mask); + print_raminit("\tsingle_rank_mask = ", meminfo->single_rank_mask); + print_raminit("\tODC = ", dword); + print_raminit("\tAddr Timing= ", dwordx); +#endif + +#if (DIMM_SUPPORT & 0x0100)==0x0000 /* 2T mode only used for unbuffered DIMM */ + if(SlowAccessMode) { + set_SlowAccessMode(ctrl); + } +#endif + + /* Program the Output Driver Compensation Control Registers (Function 2:Offset 0x9c, index 0, 0x20) */ + pci_write_config32_index_wait(ctrl->f2, 0x98, 0, dword); + if(meminfo->is_Width128) { + pci_write_config32_index_wait(ctrl->f2, 0x98, 0x20, dword); + } + + /* Program the Address Timing Control Registers (Function 2:Offset 0x9c, index 4, 0x24) */ + pci_write_config32_index_wait(ctrl->f2, 0x98, 4, dwordx); + if(meminfo->is_Width128) { + pci_write_config32_index_wait(ctrl->f2, 0x98, 0x24, dwordx); + } + +} + + +static void set_RDqsEn(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo) +{ +#if CPU_SOCKET_TYPE==0x10 + //only need to set for reg and x8 + uint32_t dch; + + dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH); + + dch &= ~DCH_RDqsEn; + if((!meminfo->x4_mask) && (!meminfo->x16_mask)) { + dch |= DCH_RDqsEn; + } + + pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch); +#endif +} + + +static void set_idle_cycle_limit(const struct mem_controller *ctrl, const struct mem_param *param) +{ + uint32_t dcm; + /* AMD says to Hardcode this */ + dcm = pci_read_config32(ctrl->f2, DRAM_CTRL_MISC); + dcm &= ~(DCM_ILD_lmt_MASK << DCM_ILD_lmt_SHIFT); + dcm |= DCM_ILD_lmt_16 << DCM_ILD_lmt_SHIFT; + dcm |= DCM_DCC_EN; + pci_write_config32(ctrl->f2, DRAM_CTRL_MISC, dcm); +} + +static void set_RdWrQByp(const struct mem_controller *ctrl, const struct mem_param *param) +{ + set_TT(ctrl, param, DRAM_CTRL_MISC, DCM_RdWrQByp_SHIFT, DCM_RdWrQByp_MASK,0, 0, 3, 2, "RdWrQByp"); +} + + + +static long spd_set_dram_timing(const struct mem_controller *ctrl, const struct mem_param *param, long dimm_mask, struct mem_info *meminfo) +{ + int i; + + for(i = 0; i < DIMM_SOCKETS; i++) { + int rc; + if (!(dimm_mask & (1 << i))) { + continue; + } + print_tx("dimm socket: ", i); + /* DRAM Timing Low Register */ + print_t("\ttrc\r\n"); + if ((rc = update_dimm_Trc (ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttrcd\r\n"); + if ((rc = update_dimm_Trcd(ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttrrd\r\n"); + if ((rc = update_dimm_Trrd(ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttras\r\n"); + if ((rc = update_dimm_Tras(ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttrp\r\n"); + if ((rc = update_dimm_Trp (ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttrtp\r\n"); + if ((rc = update_dimm_Trtp(ctrl, param, i, meminfo)) <= 0) goto dimm_err; + + print_t("\ttwr\r\n"); + if ((rc = update_dimm_Twr (ctrl, param, i)) <= 0) goto dimm_err; + + /* DRAM Timing High Register */ + print_t("\ttref\r\n"); + if ((rc = update_dimm_Tref(ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttwtr\r\n"); + if ((rc = update_dimm_Twtr(ctrl, param, i)) <= 0) goto dimm_err; + + print_t("\ttrfc\r\n"); + if ((rc = update_dimm_Trfc(ctrl, param, i, meminfo)) <= 0) goto dimm_err; + + /* DRAM Config Low */ + + continue; + dimm_err: + if (rc < 0) { + return -1; + } + dimm_mask = disable_dimm(ctrl, i, dimm_mask, meminfo); + } + + meminfo->dimm_mask = dimm_mask; // store final dimm_mask + + get_extra_dimm_mask(ctrl, meminfo); // will be used by RDqsEn and dimm_x4 + /* DRAM Timing Low Register */ + + /* DRAM Timing High Register */ + set_TrwtTO(ctrl, param); + set_Twrrd (ctrl, param); + set_Twrwr (ctrl, param); + set_Trdrd (ctrl, param); + + set_4RankRDimm(ctrl, param, meminfo); + + /* DRAM Config High */ + set_Tfaw(ctrl, param, meminfo); + set_DcqBypassMax(ctrl, param); + set_max_async_latency(ctrl, param); + set_RDqsEn(ctrl, param, meminfo); + + /* DRAM Config Low */ + set_ecc(ctrl, param, dimm_mask, meminfo); + set_dimm_x4(ctrl, param, meminfo); + set_DramTerm(ctrl, param, meminfo); + + /* DRAM Control Misc */ + set_idle_cycle_limit(ctrl, param); + set_RdWrQByp(ctrl, param); + + return dimm_mask; +} + +static void sdram_set_spd_registers(const struct mem_controller *ctrl, struct sys_info *sysinfo) +{ + struct spd_set_memclk_result result; + const struct mem_param *param; + struct mem_param paramx; + struct mem_info *meminfo; + long dimm_mask; +#if 1 + if (!sysinfo->ctrl_present[ctrl->node_id]) { +// print_debug("No memory controller present\r\n"); + return; + } +#endif + meminfo = &sysinfo->meminfo[ctrl->node_id]; + + print_debug_addr("sdram_set_spd_registers: paramx :", ¶mx); + + activate_spd_rom(ctrl); + dimm_mask = spd_detect_dimms(ctrl); + if (!(dimm_mask & ((1 << DIMM_SOCKETS) - 1))) { + print_debug("No memory for this cpu\r\n"); + return; + } + dimm_mask = spd_enable_2channels(ctrl, dimm_mask, meminfo); + if (dimm_mask < 0) + goto hw_spd_err; + dimm_mask = spd_set_ram_size(ctrl , dimm_mask, meminfo); + if (dimm_mask < 0) + goto hw_spd_err; + dimm_mask = spd_handle_unbuffered_dimms(ctrl, dimm_mask, meminfo); + if (dimm_mask < 0) + goto hw_spd_err; + result = spd_set_memclk(ctrl, dimm_mask, meminfo); + param = result.param; + dimm_mask = result.dimm_mask; + if (dimm_mask < 0) + goto hw_spd_err; + + //store memclk set to sysinfo, incase we need rebuilt param again + meminfo->memclk_set = param->dch_memclk; + + memcpy(¶mx, param, sizeof(paramx)); + + paramx.divisor = get_exact_divisor(param->dch_memclk, paramx.divisor); + + dimm_mask = spd_set_dram_timing(ctrl, ¶mx , dimm_mask, meminfo); // dimm_mask will be stored to meminfo->dimm_mask + if (dimm_mask < 0) + goto hw_spd_err; + + order_dimms(ctrl, meminfo); + + return; + hw_spd_err: + /* Unrecoverable error reading SPD data */ + print_err("SPD error - reset\r\n"); + hard_reset(); + return; +} + +#define TIMEOUT_LOOPS 300000 + +#include "raminit_f_dqs.c" + +#if HW_MEM_HOLE_SIZEK != 0 +static uint32_t hoist_memory(int controllers, const struct mem_controller *ctrl,unsigned hole_startk, int i) +{ + int ii; + uint32_t carry_over; + device_t dev; + uint32_t base, limit; + uint32_t basek; + uint32_t hoist; + int j; + + carry_over = (4*1024*1024) - hole_startk; + + for(ii=controllers - 1;ii>i;ii--) { + base = pci_read_config32(ctrl[0].f1, 0x40 + (ii << 3)); + if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { + continue; + } + limit = pci_read_config32(ctrl[0].f1, 0x44 + (ii << 3)); + limit += (carry_over << 2 ); + base += (carry_over << 2 ); + for(j = 0; j < controllers; j++) { + pci_write_config32(ctrl[j].f1, 0x44 + (ii << 3), limit); + pci_write_config32(ctrl[j].f1, 0x40 + (ii << 3), base ); + } + } + limit = pci_read_config32(ctrl[0].f1, 0x44 + (i << 3)); + limit += (carry_over << 2); + for(j = 0; j < controllers; j++) { + pci_write_config32(ctrl[j].f1, 0x44 + (i << 3), limit); + } + dev = ctrl[i].f1; + base = pci_read_config32(dev, 0x40 + (i << 3)); + basek = (base & 0xffff0000) >> 2; + if(basek == hole_startk) { + //don't need set memhole here, because hole off set will be 0, overflow + //so need to change base reg instead, new basek will be 4*1024*1024 + base &= 0x0000ffff; + base |= (4*1024*1024)<<2; + for(j = 0; j < controllers; j++) { + pci_write_config32(ctrl[j].f1, 0x40 + (i<<3), base); + } + } + else + { + hoist = /* hole start address */ + ((hole_startk << 10) & 0xff000000) + + /* hole address to memory controller address */ + (((basek + carry_over) >> 6) & 0x0000ff00) + + /* enable */ + 1; + pci_write_config32(dev, 0xf0, hoist); + } + + return carry_over; +} + +static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl) +{ + + uint32_t hole_startk; + int i; + + hole_startk = 4*1024*1024 - HW_MEM_HOLE_SIZEK; + +#if HW_MEM_HOLE_SIZE_AUTO_INC == 1 + //We need to double check if the hole_startk is valid, if it is equal to basek, we need to decrease it some + uint32_t basek_pri; + for(i=0; i<controllers; i++) { + uint32_t base; + unsigned base_k; + base = pci_read_config32(ctrl[0].f1, 0x40 + (i << 3)); + if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { + continue; + } + base_k = (base & 0xffff0000) >> 2; + if(base_k == hole_startk) { + hole_startk -= (base_k - basek_pri)>>1; // decrease mem hole startk to make sure it is on middle of previous node + break; //only one hole + } + basek_pri = base_k; + } +#endif + //find node index that need do set hole + for(i=0; i<controllers; i++) { + uint32_t base, limit; + unsigned base_k, limit_k; + base = pci_read_config32(ctrl[0].f1, 0x40 + (i << 3)); + if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) { + continue; + } + limit = pci_read_config32(ctrl[0].f1, 0x44 + (i << 3)); + base_k = (base & 0xffff0000) >> 2; + limit_k = ((limit + 0x00010000) & 0xffff0000) >> 2; + if ((base_k <= hole_startk) && (limit_k > hole_startk)) { + unsigned end_k; + hoist_memory(controllers, ctrl, hole_startk, i); + end_k = memory_end_k(ctrl, controllers); + set_top_mem(end_k, hole_startk); + break; //only one hole + } + } + +} + +#endif + +static void sdram_enable(int controllers, const struct mem_controller *ctrl, struct sys_info *sysinfo) +{ + int i; + + +#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 + unsigned cpu_f0_f1[8]; + tsc_t tsc, tsc0[8]; + + print_debug_addr("sdram_enable: tsc0[8]: ", &tsc0[0]); +#endif + uint32_t dword; + + /* Error if I don't have memory */ + if (memory_end_k(ctrl, controllers) == 0) { + die("No memory\r\n"); + } + + /* Before enabling memory start the memory clocks */ + for(i = 0; i < controllers; i++) { + uint32_t dtl, dch; + if (!sysinfo->ctrl_present[ i ]) + continue; + dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH); + + // if no memory installed, disabled the interface + if(sysinfo->meminfo[i].dimm_mask==0x00){ + dch |= DCH_DisDramInterface; + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_HIGH, dch); + + } + else { + dch |= DCH_MemClkFreqVal; + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_HIGH, dch); + /* address timing and Output driver comp Control */ + set_misc_timing(ctrl+i, sysinfo->meminfo+i ); + } + } + + /* We need to wait a mimmium of 20 MEMCLKS to enable the InitDram */ + memreset(controllers, ctrl); + + for(i = 0; i < controllers; i++) { + uint32_t dcl, dch; + if (!sysinfo->ctrl_present[ i ]) + continue; + /* Skip everything if I don't have any memory on this controller */ + dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH); + if (!(dch & DCH_MemClkFreqVal)) { + continue; + } + + /* ChipKill */ + dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); + if (dcl & DCL_DimmEccEn) { + uint32_t mnc; + print_spew("ECC enabled\r\n"); + mnc = pci_read_config32(ctrl[i].f3, MCA_NB_CONFIG); + mnc |= MNC_ECC_EN; + if (dcl & DCL_Width128) { + mnc |= MNC_CHIPKILL_EN; + } + pci_write_config32(ctrl[i].f3, MCA_NB_CONFIG, mnc); + } + +#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 + cpu_f0_f1[i] = is_cpu_pre_f2_in_bsp(i); + if(cpu_f0_f1[i]) { + //Rev F0/F1 workaround +#if 1 + /* Set the DqsRcvEnTrain bit */ + dword = pci_read_config32(ctrl[i].f2, DRAM_CTRL); + dword |= DC_DqsRcvEnTrain; + pci_write_config32(ctrl[i].f2, DRAM_CTRL, dword); +#endif + tsc0[i] = rdtsc(); + } +#endif + +#if 0 + /* Set the DqsRcvEnTrain bit */ + dword = pci_read_config32(ctrl[i].f2, DRAM_CTRL); + dword |= DC_DqsRcvEnTrain; + pci_write_config32(ctrl[i].f2, DRAM_CTRL, dword); +#endif + + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl); + dcl |= DCL_InitDram; + pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl); + + } + + for(i = 0; i < controllers; i++) { + uint32_t dcl, dch, dcm; + if (!sysinfo->ctrl_present[ i ]) + continue; + /* Skip everything if I don't have any memory on this controller */ + if(sysinfo->meminfo[i].dimm_mask==0x00) continue; + + print_debug("Initializing memory: "); + int loops = 0; + do { + dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW); + loops++; + if ((loops & 1023) == 0) { + print_debug("."); + } + } while(((dcl & DCL_InitDram) != 0) && (loops < TIMEOUT_LOOPS)); + if (loops >= TIMEOUT_LOOPS) { + print_debug(" failed\r\n"); + continue; + } + + /* Wait until it is safe to touch memory */ + do { + dcm = pci_read_config32(ctrl[i].f2, DRAM_CTRL_MISC); + } while(((dcm & DCM_MemClrStatus) == 0) /* || ((dcm & DCM_DramEnabled) == 0)*/ ); + +#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 + if(cpu_f0_f1[i]) { + tsc= rdtsc(); + + print_debug_dqs_tsc("\r\nbegin tsc0", i, tsc0[i].hi, tsc0[i].lo, 2); + print_debug_dqs_tsc("end tsc ", i, tsc.hi, tsc.lo, 2); + + if(tsc.lo<tsc0[i].lo) { + tsc.hi--; + } + tsc.lo -= tsc0[i].lo; + tsc.hi -= tsc0[i].hi; + + tsc0[i].lo = tsc.lo; + tsc0[i].hi = tsc.hi; + + print_debug_dqs_tsc(" dtsc0", i, tsc0[i].hi, tsc0[i].lo, 2); + } +#endif + print_debug(" done\r\n"); + } + +#if HW_MEM_HOLE_SIZEK != 0 + // init hw mem hole here + /* DramHoleValid bit only can be set after MemClrStatus is set by Hardware */ + set_hw_mem_hole(controllers, ctrl); +#endif + + //store tom to sysinfo, and it will be used by dqs_timing + { + msr_t msr; + //[1M, TOM) + msr = rdmsr(TOP_MEM); + sysinfo->tom_k = ((msr.hi<<24) | (msr.lo>>8))>>2; + + //[4G, TOM2) + msr = rdmsr(TOP_MEM2); + sysinfo->tom2_k = ((msr.hi<<24)| (msr.lo>>8))>>2; + } + + for(i = 0; i < controllers; i++) { + sysinfo->mem_trained[i] = 0; + } + +#if MEM_TRAIN_SEQ == 0 + #if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1 + dqs_timing(controllers, ctrl, tsc0, sysinfo); + #else + dqs_timing(controllers, ctrl, sysinfo); + #endif +#else + + #if MEM_TRAIN_SEQ == 2 + //need to enable mtrr, so dqs training could access the test address + setup_mtrr_dqs(sysinfo->tom_k, sysinfo->tom2_k); + #endif + + for(i = 0; i < controllers; i++) { + if (!sysinfo->ctrl_present[ i ]) + continue; + + /* Skip everything if I don't have any memory on this controller */ + if(sysinfo->meminfo[i].dimm_mask==0x00) continue; + + dqs_timing(i, ctrl, sysinfo, 1); + + #if MEM_TRAIN_SEQ == 1 + break; // only train the first node with ram + #endif + } + + #if MEM_TRAIN_SEQ == 2 + clear_mtrr_dqs(sysinfo->tom2_k); + #endif + +#endif + + +} +static void fill_mem_ctrl(int controllers, struct mem_controller *ctrl_a, const uint16_t *spd_addr) +{ + int i; + int j; + struct mem_controller *ctrl; + for(i=0;i<controllers; i++) { + ctrl = &ctrl_a[i]; + ctrl->node_id = i; + ctrl->f0 = PCI_DEV(0, 0x18+i, 0); + ctrl->f1 = PCI_DEV(0, 0x18+i, 1); + ctrl->f2 = PCI_DEV(0, 0x18+i, 2); + ctrl->f3 = PCI_DEV(0, 0x18+i, 3); + + if(spd_addr == (void *)0) continue; + + for(j=0;j<DIMM_SOCKETS;j++) { + ctrl->channel0[j] = spd_addr[(i*2+0)*DIMM_SOCKETS + j]; + ctrl->channel1[j] = spd_addr[(i*2+1)*DIMM_SOCKETS + j]; + } + } +} |