diff options
| author | Mike Loptien <mike.loptien@se-eng.com> | 2013-03-15 13:05:59 -0600 |
|---|---|---|
| committer | Stefan Reinauer <stefan.reinauer@coreboot.org> | 2013-03-17 19:55:03 +0100 |
| commit | 42ad2006572ea784548a79aabfaa3b00295d1215 (patch) | |
| tree | a84de5bd0b0f78d5e551ecae1f9e568d5e765400 /src/mainboard | |
| parent | 00a0e76bc5ffaba01c98f1c1384b0499516fdaef (diff) | |
Lippert Fam14 DSDT: Add secondary bus range to PCI0
Adding the 'WordBusNumber' macro to the PCI0
CRES ResourceTemplate in the Persimmon DSDT.
This sets up the bus number for the PCI0 device
and the secondary bus number in the CRS method.
This change came in response to a 'dmesg' error
which states:
'[FIRMWARE BUG]: ACPI: no secondary bus range in _CRS'
By adding the 'WordBusNumber' macro, ACPI can set
up a valid range for the PCIe downstream busses,
thereby relieving the Linux kernel from "guessing"
the valid range based off _BBN or assuming [0-0xFF].
The Linux kernel code that checks this bus range is
in `drivers/acpi/pci_root.c`. PCI busses can have
up to 256 secondary busses connected to them via
a PCI-PCI bridge. However, these busses do not
have to be sequentially numbered, so leaving out a
section of the range (eg. allowing [0-0x7F]) will
unnecessarily restrict the downstream busses.
This is the same change as made to Persimmon with
change-id I44f22:
http://review.coreboot.org/#/c/2592/
Change-Id: Ie36b60973c6a5f9076bb55c8f451532711a2f8a8
Signed-off-by: Mike Loptien <mike.loptien@se-eng.com>
Reviewed-on: http://review.coreboot.org/2737
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Diffstat (limited to 'src/mainboard')
| -rw-r--r-- | src/mainboard/lippert/frontrunner-af/dsdt.asl | 16 | ||||
| -rw-r--r-- | src/mainboard/lippert/toucan-af/dsdt.asl | 16 |
2 files changed, 32 insertions, 0 deletions
diff --git a/src/mainboard/lippert/frontrunner-af/dsdt.asl b/src/mainboard/lippert/frontrunner-af/dsdt.asl index b9345de1e1..ba29228ad3 100644 --- a/src/mainboard/lippert/frontrunner-af/dsdt.asl +++ b/src/mainboard/lippert/frontrunner-af/dsdt.asl @@ -1490,6 +1490,22 @@ DefinitionBlock ( } /* end Ac97modem */ Name(CRES, ResourceTemplate() { + /* Set the Bus number and Secondary Bus number for the PCI0 device + * The Secondary bus range for PCI0 lets the system + * know what bus values are allowed on the downstream + * side of this PCI bus if there is a PCI-PCI bridge. + * PCI busses can have 256 secondary busses which + * range from [0-0xFF] but they do not need to be + * sequential. + */ + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x00FF, /* range maximum */ + 0x0000, /* translation */ + 0x0100, /* length */ + ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */ + IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */ IO(Decode16, 0x0E00, 0x0E00, 1, 0x80) /* SIO runtime regs */ IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) diff --git a/src/mainboard/lippert/toucan-af/dsdt.asl b/src/mainboard/lippert/toucan-af/dsdt.asl index 9c0faac493..e454bc1f3b 100644 --- a/src/mainboard/lippert/toucan-af/dsdt.asl +++ b/src/mainboard/lippert/toucan-af/dsdt.asl @@ -1490,6 +1490,22 @@ DefinitionBlock ( } /* end Ac97modem */ Name(CRES, ResourceTemplate() { + /* Set the Bus number and Secondary Bus number for the PCI0 device + * The Secondary bus range for PCI0 lets the system + * know what bus values are allowed on the downstream + * side of this PCI bus if there is a PCI-PCI bridge. + * PCI busses can have 256 secondary busses which + * range from [0-0xFF] but they do not need to be + * sequential. + */ + WordBusNumber (ResourceProducer, MinFixed, MaxFixed, PosDecode, + 0x0000, /* address granularity */ + 0x0000, /* range minimum */ + 0x00FF, /* range maximum */ + 0x0000, /* translation */ + 0x0100, /* length */ + ,, PSB0) /* ResourceSourceIndex, ResourceSource, DescriptorName */ + IO(Decode16, 0x004E, 0x004E, 1, 2) /* SIO config regs */ IO(Decode16, 0x0CF8, 0x0CF8, 1, 8) |